Techniques, Outcomes and Risks for removal of root filling materials.
Retreatment in endodontics starts with the removal of the root filling material, this seminar covers different technique in the removal of root filling materials "mainly GP" but other materials are also covered.
This presentation is all about restoration of endodontically treated teeth, prefabricated post and core, cast post and core, direct and indirect technique.
This presentation is all about restoration of endodontically treated teeth, prefabricated post and core, cast post and core, direct and indirect technique.
In this lecture I explain the basic concept of root canal filling or what called obturation. The lectures discuss different techniques used in that matter in step-by-step fashion and explanatory pictures.
It is directed to the level of undergraduate mind.
This lecture, which oriented to the level of mind of undergraduate students, discuss the topic of pulpectomy, its indications, contraindications, and procedural steps.
Visit us on Facebook:
https://www.facebook.com/iraqi.Dental.Academy
Biomechanical preparation is the crucial step in endodontic procedure. Biological principles can only be preserved if the mechanical shaping of the perticular canal is completed with the cordial following of the endodontic priciples. This presentation is aimed to simplify the various endodontic techniques for root canal shaping in as conservative as possible manner.
This presentation describes about evolution of nitinol (NiTi), its properties, manufacturing, metallurgy and various rotary systems in the field of endodontics.
One of the most dreaded nightmares of any clinician is broken instruments in the midst of an endodontic treatment. NiTi rotary instruments show a high incidence of instrument fracture despite their favourable qualities.
The presentation features the pulp reparative and regenerative procedures which can be carried out in immature teeth. It involves development of mature tooth from an immature one by root formation and root fixation as a preparatory phase for root canal treatment.
A most conservative treatment to save infected natural teeth.
If root canal treatment fails, patient may suffer from severe pain in that case, there is no need to remove teeth, Re-root canal can be done.
Root canal treatment failure may occur due to continuance of bacterial infections.
-Incomplete Obturation
-due to poorly cleaned canals
-missing of treatment in any canal in case of multi-rooted teeth
-salivary contamination while sealing.
An advanced endodontic technology prevents teeth loss and provide impeccable treatment
Learn more and for more details follow our links:-
Google link:
https://business.google.com/dashboard/l/04970356233769420071
Facebook link for Dental Courses:
https://www.facebook.com/dentalcoursesdelhi/
Facebook link for Dental Treatments:
https://www.facebook.com/sachdevadental/
You tube Link:
https://www.youtube.com/user/drrajatsachdeva
Linkedin link:
https://www.linkedin.com/in/drrajatsachdeva/
Slideshare:
https://www.slideshare.net/drrajatsachdeva
Twitter Page :
https://twitter.com/drrajatsachdeva
Call us to know more:- +919818894041,01142464041
In this lecture I explain the basic concept of root canal filling or what called obturation. The lectures discuss different techniques used in that matter in step-by-step fashion and explanatory pictures.
It is directed to the level of undergraduate mind.
This lecture, which oriented to the level of mind of undergraduate students, discuss the topic of pulpectomy, its indications, contraindications, and procedural steps.
Visit us on Facebook:
https://www.facebook.com/iraqi.Dental.Academy
Biomechanical preparation is the crucial step in endodontic procedure. Biological principles can only be preserved if the mechanical shaping of the perticular canal is completed with the cordial following of the endodontic priciples. This presentation is aimed to simplify the various endodontic techniques for root canal shaping in as conservative as possible manner.
This presentation describes about evolution of nitinol (NiTi), its properties, manufacturing, metallurgy and various rotary systems in the field of endodontics.
One of the most dreaded nightmares of any clinician is broken instruments in the midst of an endodontic treatment. NiTi rotary instruments show a high incidence of instrument fracture despite their favourable qualities.
The presentation features the pulp reparative and regenerative procedures which can be carried out in immature teeth. It involves development of mature tooth from an immature one by root formation and root fixation as a preparatory phase for root canal treatment.
A most conservative treatment to save infected natural teeth.
If root canal treatment fails, patient may suffer from severe pain in that case, there is no need to remove teeth, Re-root canal can be done.
Root canal treatment failure may occur due to continuance of bacterial infections.
-Incomplete Obturation
-due to poorly cleaned canals
-missing of treatment in any canal in case of multi-rooted teeth
-salivary contamination while sealing.
An advanced endodontic technology prevents teeth loss and provide impeccable treatment
Learn more and for more details follow our links:-
Google link:
https://business.google.com/dashboard/l/04970356233769420071
Facebook link for Dental Courses:
https://www.facebook.com/dentalcoursesdelhi/
Facebook link for Dental Treatments:
https://www.facebook.com/sachdevadental/
You tube Link:
https://www.youtube.com/user/drrajatsachdeva
Linkedin link:
https://www.linkedin.com/in/drrajatsachdeva/
Slideshare:
https://www.slideshare.net/drrajatsachdeva
Twitter Page :
https://twitter.com/drrajatsachdeva
Call us to know more:- +919818894041,01142464041
Management of non surgical root-canal treatment failureHamza Tahir
This presentation of mine is actually a brief overview of non surgical root canal re treatment procedure from removing permanent fillings to removal procedure of obturating material etc.
smear layer in endodontics/ rotary endodontic courses by indian dental academyIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
A Modified Partial Platform Technique to Retrieve Instrument Fragments from C...Nadeem Aashiq
A Modified Partial Platform Technique to Retrieve Instrument Fragments from Curved and Narrow Canals: A Report of 2 Cases
Narasimhan B, Vinothkumar TS, Praveen R, Setzer FC, Nagendrababu V. A (J Endod 2021;47:1657–1663
Similar to Removal of root filling materials techniques, outcomes and risks (20)
Traumatic dental injuries, incidence, classification, and treatment. This seminar is made to help establish the proper diagnosis and management of traumatic dental injuries based on evidence and international guidelines
This seminar talks about the dental surveyor and it applications in relation to Removable Partial Dentures and it also talk about the principles of RPD design, difficulties and management of free end saddle. finally the altered cast impression technique or also called Applegate's technique.
Periodontal risk & making risk assessmentibrahimaziz15
Periodontal risk and risk assessment is very importnant in monitoring periodontally affected patients, this seminar will give you an idea about periodontal risk factors and how to make a periodontal risk assessment for patients.
New Drug Discovery and Development .....NEHA GUPTA
The "New Drug Discovery and Development" process involves the identification, design, testing, and manufacturing of novel pharmaceutical compounds with the aim of introducing new and improved treatments for various medical conditions. This comprehensive endeavor encompasses various stages, including target identification, preclinical studies, clinical trials, regulatory approval, and post-market surveillance. It involves multidisciplinary collaboration among scientists, researchers, clinicians, regulatory experts, and pharmaceutical companies to bring innovative therapies to market and address unmet medical needs.
Acute scrotum is a general term referring to an emergency condition affecting the contents or the wall of the scrotum.
There are a number of conditions that present acutely, predominantly with pain and/or swelling
A careful and detailed history and examination, and in some cases, investigations allow differentiation between these diagnoses. A prompt diagnosis is essential as the patient may require urgent surgical intervention
Testicular torsion refers to twisting of the spermatic cord, causing ischaemia of the testicle.
Testicular torsion results from inadequate fixation of the testis to the tunica vaginalis producing ischemia from reduced arterial inflow and venous outflow obstruction.
The prevalence of testicular torsion in adult patients hospitalized with acute scrotal pain is approximately 25 to 50 percent
Title: Sense of Taste
Presenter: Dr. Faiza, Assistant Professor of Physiology
Qualifications:
MBBS (Best Graduate, AIMC Lahore)
FCPS Physiology
ICMT, CHPE, DHPE (STMU)
MPH (GC University, Faisalabad)
MBA (Virtual University of Pakistan)
Learning Objectives:
Describe the structure and function of taste buds.
Describe the relationship between the taste threshold and taste index of common substances.
Explain the chemical basis and signal transduction of taste perception for each type of primary taste sensation.
Recognize different abnormalities of taste perception and their causes.
Key Topics:
Significance of Taste Sensation:
Differentiation between pleasant and harmful food
Influence on behavior
Selection of food based on metabolic needs
Receptors of Taste:
Taste buds on the tongue
Influence of sense of smell, texture of food, and pain stimulation (e.g., by pepper)
Primary and Secondary Taste Sensations:
Primary taste sensations: Sweet, Sour, Salty, Bitter, Umami
Chemical basis and signal transduction mechanisms for each taste
Taste Threshold and Index:
Taste threshold values for Sweet (sucrose), Salty (NaCl), Sour (HCl), and Bitter (Quinine)
Taste index relationship: Inversely proportional to taste threshold
Taste Blindness:
Inability to taste certain substances, particularly thiourea compounds
Example: Phenylthiocarbamide
Structure and Function of Taste Buds:
Composition: Epithelial cells, Sustentacular/Supporting cells, Taste cells, Basal cells
Features: Taste pores, Taste hairs/microvilli, and Taste nerve fibers
Location of Taste Buds:
Found in papillae of the tongue (Fungiform, Circumvallate, Foliate)
Also present on the palate, tonsillar pillars, epiglottis, and proximal esophagus
Mechanism of Taste Stimulation:
Interaction of taste substances with receptors on microvilli
Signal transduction pathways for Umami, Sweet, Bitter, Sour, and Salty tastes
Taste Sensitivity and Adaptation:
Decrease in sensitivity with age
Rapid adaptation of taste sensation
Role of Saliva in Taste:
Dissolution of tastants to reach receptors
Washing away the stimulus
Taste Preferences and Aversions:
Mechanisms behind taste preference and aversion
Influence of receptors and neural pathways
Impact of Sensory Nerve Damage:
Degeneration of taste buds if the sensory nerve fiber is cut
Abnormalities of Taste Detection:
Conditions: Ageusia, Hypogeusia, Dysgeusia (parageusia)
Causes: Nerve damage, neurological disorders, infections, poor oral hygiene, adverse drug effects, deficiencies, aging, tobacco use, altered neurotransmitter levels
Neurotransmitters and Taste Threshold:
Effects of serotonin (5-HT) and norepinephrine (NE) on taste sensitivity
Supertasters:
25% of the population with heightened sensitivity to taste, especially bitterness
Increased number of fungiform papillae
Flu Vaccine Alert in Bangalore Karnatakaaddon Scans
As flu season approaches, health officials in Bangalore, Karnataka, are urging residents to get their flu vaccinations. The seasonal flu, while common, can lead to severe health complications, particularly for vulnerable populations such as young children, the elderly, and those with underlying health conditions.
Dr. Vidisha Kumari, a leading epidemiologist in Bangalore, emphasizes the importance of getting vaccinated. "The flu vaccine is our best defense against the influenza virus. It not only protects individuals but also helps prevent the spread of the virus in our communities," he says.
This year, the flu season is expected to coincide with a potential increase in other respiratory illnesses. The Karnataka Health Department has launched an awareness campaign highlighting the significance of flu vaccinations. They have set up multiple vaccination centers across Bangalore, making it convenient for residents to receive their shots.
To encourage widespread vaccination, the government is also collaborating with local schools, workplaces, and community centers to facilitate vaccination drives. Special attention is being given to ensuring that the vaccine is accessible to all, including marginalized communities who may have limited access to healthcare.
Residents are reminded that the flu vaccine is safe and effective. Common side effects are mild and may include soreness at the injection site, mild fever, or muscle aches. These side effects are generally short-lived and far less severe than the flu itself.
Healthcare providers are also stressing the importance of continuing COVID-19 precautions. Wearing masks, practicing good hand hygiene, and maintaining social distancing are still crucial, especially in crowded places.
Protect yourself and your loved ones by getting vaccinated. Together, we can help keep Bangalore healthy and safe this flu season. For more information on vaccination centers and schedules, residents can visit the Karnataka Health Department’s official website or follow their social media pages.
Stay informed, stay safe, and get your flu shot today!
263778731218 Abortion Clinic /Pills In Harare ,sisternakatoto
263778731218 Abortion Clinic /Pills In Harare ,ABORTION WOMEN’S CLINIC +27730423979 IN women clinic we believe that every woman should be able to make choices in her pregnancy. Our job is to provide compassionate care, safety,affordable and confidential services. That’s why we have won the trust from all generations of women all over the world. we use non surgical method(Abortion pills) to terminate…Dr.LISA +27730423979women Clinic is committed to providing the highest quality of obstetrical and gynecological care to women of all ages. Our dedicated staff aim to treat each patient and her health concerns with compassion and respect.Our dedicated group ABORTION WOMEN’S CLINIC +27730423979 IN women clinic we believe that every woman should be able to make choices in her pregnancy. Our job is to provide compassionate care, safety,affordable and confidential services. That’s why we have won the trust from all generations of women all over the world. we use non surgical method(Abortion pills) to terminate…Dr.LISA +27730423979women Clinic is committed to providing the highest quality of obstetrical and gynecological care to women of all ages. Our dedicated staff aim to treat each patient and her health concerns with compassion and respect.Our dedicated group of receptionists, nurses, and physicians have worked together as a teamof receptionists, nurses, and physicians have worked together as a team wwww.lisywomensclinic.co.za/
Title: Sense of Smell
Presenter: Dr. Faiza, Assistant Professor of Physiology
Qualifications:
MBBS (Best Graduate, AIMC Lahore)
FCPS Physiology
ICMT, CHPE, DHPE (STMU)
MPH (GC University, Faisalabad)
MBA (Virtual University of Pakistan)
Learning Objectives:
Describe the primary categories of smells and the concept of odor blindness.
Explain the structure and location of the olfactory membrane and mucosa, including the types and roles of cells involved in olfaction.
Describe the pathway and mechanisms of olfactory signal transmission from the olfactory receptors to the brain.
Illustrate the biochemical cascade triggered by odorant binding to olfactory receptors, including the role of G-proteins and second messengers in generating an action potential.
Identify different types of olfactory disorders such as anosmia, hyposmia, hyperosmia, and dysosmia, including their potential causes.
Key Topics:
Olfactory Genes:
3% of the human genome accounts for olfactory genes.
400 genes for odorant receptors.
Olfactory Membrane:
Located in the superior part of the nasal cavity.
Medially: Folds downward along the superior septum.
Laterally: Folds over the superior turbinate and upper surface of the middle turbinate.
Total surface area: 5-10 square centimeters.
Olfactory Mucosa:
Olfactory Cells: Bipolar nerve cells derived from the CNS (100 million), with 4-25 olfactory cilia per cell.
Sustentacular Cells: Produce mucus and maintain ionic and molecular environment.
Basal Cells: Replace worn-out olfactory cells with an average lifespan of 1-2 months.
Bowman’s Gland: Secretes mucus.
Stimulation of Olfactory Cells:
Odorant dissolves in mucus and attaches to receptors on olfactory cilia.
Involves a cascade effect through G-proteins and second messengers, leading to depolarization and action potential generation in the olfactory nerve.
Quality of a Good Odorant:
Small (3-20 Carbon atoms), volatile, water-soluble, and lipid-soluble.
Facilitated by odorant-binding proteins in mucus.
Membrane Potential and Action Potential:
Resting membrane potential: -55mV.
Action potential frequency in the olfactory nerve increases with odorant strength.
Adaptation Towards the Sense of Smell:
Rapid adaptation within the first second, with further slow adaptation.
Psychological adaptation greater than receptor adaptation, involving feedback inhibition from the central nervous system.
Primary Sensations of Smell:
Camphoraceous, Musky, Floral, Pepperminty, Ethereal, Pungent, Putrid.
Odor Detection Threshold:
Examples: Hydrogen sulfide (0.0005 ppm), Methyl-mercaptan (0.002 ppm).
Some toxic substances are odorless at lethal concentrations.
Characteristics of Smell:
Odor blindness for single substances due to lack of appropriate receptor protein.
Behavioral and emotional influences of smell.
Transmission of Olfactory Signals:
From olfactory cells to glomeruli in the olfactory bulb, involving lateral inhibition.
Primitive, less old, and new olfactory systems with different path
Report Back from SGO 2024: What’s the Latest in Cervical Cancer?bkling
Are you curious about what’s new in cervical cancer research or unsure what the findings mean? Join Dr. Emily Ko, a gynecologic oncologist at Penn Medicine, to learn about the latest updates from the Society of Gynecologic Oncology (SGO) 2024 Annual Meeting on Women’s Cancer. Dr. Ko will discuss what the research presented at the conference means for you and answer your questions about the new developments.
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Ve...kevinkariuki227
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Verified Chapters 1 - 19, Complete Newest Version.pdf
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Verified Chapters 1 - 19, Complete Newest Version.pdf
Couples presenting to the infertility clinic- Do they really have infertility...Sujoy Dasgupta
Dr Sujoy Dasgupta presented the study on "Couples presenting to the infertility clinic- Do they really have infertility? – The unexplored stories of non-consummation" in the 13th Congress of the Asia Pacific Initiative on Reproduction (ASPIRE 2024) at Manila on 24 May, 2024.
The prostate is an exocrine gland of the male mammalian reproductive system
It is a walnut-sized gland that forms part of the male reproductive system and is located in front of the rectum and just below the urinary bladder
Function is to store and secrete a clear, slightly alkaline fluid that constitutes 10-30% of the volume of the seminal fluid that along with the spermatozoa, constitutes semen
A healthy human prostate measures (4cm-vertical, by 3cm-horizontal, 2cm ant-post ).
It surrounds the urethra just below the urinary bladder. It has anterior, median, posterior and two lateral lobes
It’s work is regulated by androgens which are responsible for male sex characteristics
Generalised disease of the prostate due to hormonal derangement which leads to non malignant enlargement of the gland (increase in the number of epithelial cells and stromal tissue)to cause compression of the urethra leading to symptoms (LUTS
Removal of root filling materials techniques, outcomes and risks
1. Removal of root filling materials:
Techniques, Outcomes and Risks
IBRAHIM BAYRAM
BDS, MFD RCSI, MFDS RCPSG
MCLINDENT STUDENT (PROS), CARDIFF UNIVERSITY
2. Introduction
The aim of non-surgical root canal re-treatment is to:
Relieve patient symptoms.
Re-establish healthy periapical tissues following failure of initial therapy.
By removing materials from the root canal space, chemically disinfecting canals and if present,
addressing deficiencies of pathological or iatrogenic origin.
(Virdee and Thomas, 2017)
3. Introduction
GP may be removed mechanically using hand or rotary instruments aided by heat, solvents or
ultrasound.
The technique is dependent on:
The clinical situation.
The quality of the GP root filling.
Personal preference and experience.
(Duncan and Chong, 2011)
4. Pre-treatment evaluation
Assessment (evaluating difficulty of GP removal):
Clinical and radiographic evaluation of coronal restoration and core material for gaining adequate
access.
Radiographic examination of canal filling in terms of condensation quality, voids and length.
Iatrogenic injuries, such as ledges, separated files and perforations.
Root morphology, atypical and curved canals.
5. Gutta-Percha Removal
One of the great advantages of using gutta-percha for root filling is its relative ease of removal.
Upon access, it is usually relatively easy to find the treated canal orifices with the visible pink
gutta-percha material inside.
Initial probing with an endodontic explorer into the material can help rule out the possibility
that there is a solid core carrier.
If there is a plastic carrier, then heat should not be used to remove the coronal gutta-percha.
Heat should be applied in a short burst to allow the instrument to penetrate the gutta-percha
mass, followed by cooling, which will cause the material to adhere to the heat carrier facilitating
its removal.
After removing as much gutta-percha as possible with the heated instrument, then remove any
remaining coronal material with small Gates-Glidden drills, taking care not to over enlarge the
cervical portion of the canal.
6. Gutta-Percha Removal
Probe the canal using a #10 or #15 K-file.
It is sometimes possible to remove or bypass the existing cones of gutta-percha if the canal has
been poorly obturated, thus eliminating the need for solvents.
If that is not possible, then a gutta-percha solvent must be used to remove the remaining
material in the apical portion of the canal.
7. Hand files
It may be possible to insert a Hedstrom file (size #25 or more) alongside the loose
gutta-percha root filling.
The size of the Hedstrom file is chosen so that it will engage the loose gutta-
percha root filling but not the canal wall.
Hedstrom file is rotated a quarter-turn clockwise to further ensure engagement
with the gutta-percha root filling and when the file is withdrawn from the canal, it
should pull out the loose root filling.
This technique is less likely to be effective if the gutta-percha root filling is well
condensed.
8.
9. Overextended gutta-percha removal
Overextended gutta-percha removal can be attempted by inserting a new Hedstrom file into the
extruded apical fragment of root filling using a gentle clockwise rotation to a depth of 0.5 to 1
mm beyond the apical constriction, which may engage the overextended obturation.
The file is then slowly and firmly withdrawn with no rotation, removing the overextended
material.
This technique works frequently, but care must be taken not to force the instrument apically,
which furthers the extrusion of the gutta-percha; in addition, the file may separate.
The overextended apical fragment should not be softened with solvent, as this application can
decrease the likelihood of the Hedstrom file getting a solid purchase of the apical extrusion.
10.
11. Removal of overextended gutta-percha A, Preoperative
radiograph showing overextended filling material. B, A
small Hedstrom file pierces the overextended material and
retrieves it. C, The 18-month reevaluation. The tooth is
asymptomatic.
12. Rotary Files
Using rotary systems to remove gutta-percha in the canals has been advocated due to enhanced efficiency
and effectiveness in removing gutta-percha from treated root canals.
The dedicated retreatment files have end-cutting tips to enhance penetration and removal of the root
filling mass, thus increasing their efficiency
A rotary NiTi file of a suitable size is chosen so that the cutting flutes will engage the root filling and not
the canal wall.
When activated, the flutes should propel the GP out of the canal.
The main risk: danger of instrument fracture. This may be reduced by not applying excessive apical
pressure and keeping within the recommended speed and torque limits of the chosen rotary system.
Take care from heat generation and keep away from dentin.
It is recommended that after rotary gutta-percha removal, subsequent hand instrumentation is needed to
remove the residual obturating materials completely from the canal.
13.
14. Efficacy of ProTaper Universal Retreatment Files in
Removing Filling Materials during Root Canal
Retreatment
Aim: To evaluate the efficacy of the ProTaper Universal System rotary retreatment system and of Profile 0.06 and
hand instruments (K-file) in the removal of root filling materials.
Methods: Forty-two extracted single-rooted anterior teeth were selected. The root canals were enlarged with
nickel-titanium (NiTi) rotary files, filled with gutta-percha and sealer, and randomly divided into 3 experimental
groups. The filling materials were removed with solvent in conjunction with one of the following devices and
techniques: the ProTaper Universal System for retreatment, ProFile 0.06, and hand instruments (K-file). The roots
were longitudinally sectioned, and the image of the root surface was photographed.
Results: The group that showed better results for removing filling materials was the ProTaper Universal System for
retreatment files, whereas the group of ProFile rotary instruments yielded better root canal cleanliness than the
hand instruments, even though there was no statistically significant difference.
Conclusion: The ProTaper Universal System for retreatment files left cleaner root canal walls than the K-file hand
instruments and the ProFile Rotary instruments, although none of the devices used guaranteed complete removal
of the filling materials. The rotary NiTi system proved to be faster than hand instruments in removing root filling
materials.
Valentina Giuliani et al. 2008
15. Efficacy of Different Rotary Instruments for Gutta-
Percha Removal in Root Canal Retreatment
Aim: To evaluate the efficiency of FlexMaster, ProTaper, and RaCe rotary instruments compared with
Hedström files for removal of gutta-percha during retreatment.
Methods: Sixty mandibular premolars with one single straight canal were instrumented with K-type
files and filled using cold lateral compaction and sealer. The teeth were randomly divided into four
groups of 15 specimens each. After re-preparation with Gates Glidden burs and the test instruments
the specimens were cleared. The area of remaining gutta-percha/sealer on the root canal wall was
measured from two directions.
Results: The RaCe group showed significantly less residual obturation material than FlexMaster and
Hedström group (p 0.05; closed test procedure). There was no difference between ProTaper and all
other instruments (p 0.05). ProTaper and RaCe instruments required significantly less time for
retreatment than FlexMaster and Hedström files (p 0.05). One RaCe file, two ProTaper, and two
FlexMaster instruments separated.
Conclusion: RaCe cleaned obturated canals more effectively than hand files and FlexMaster files.
Schirrmeister et al. 2006
16. Three-dimensional Evaluation of Effectiveness of
Hand and Rotary Instrumentation for Retreatment of
Canals Filled with Different Materials
Aim: To measure the remaining filling volume of different obturation materials from root-filled
extracted teeth by using 2 removal techniques.
Methods: Eighty single-rooted teeth were collected and decoronated, and the root canal was
prepared by using the ProTaper nickel-titanium rotary files. The teeth were randomly allocated into 4
groups, and each group was obturated by using a different material. Group 1 was filled with gutta-
percha and TubliSeal sealer, group 2 was filled with EndoRez points and EndoRez sealer, group 3 was
filled with RealSeal points and RealSeal sealer, and Group 4 was filled with a gutta-percha point and
GuttaFlow sealer. Teeth were scanned with a micro– computed tomography scan, and then root
fillings were removed by using ProTaper retreatment files or hand K-files. Teeth were scanned again,
and volume measurements were carried out with micro– computed tomography software.
Conclusion: The present study showed that all tested filling materials were not completely removed
during retreatment by using hand or rotary files. Gutta-percha was more efficiently removed by using
hand K-files.
Hammad et al. 2008
17. Efficacy of ProTaper Retreatment System in Root Canals
Filled with Gutta-Percha and Two Endodontic Sealers
Aim: This in vitro study evaluated comparatively the efficacy of the ProTaper Universal (Tulsa
Dental, Tulsa, OK) rotary retreatment system and hand files for removal of filling material during
root canal retreatment and the influence of the type of sealer on the presence of filling debris in
the re-instrumented canals.
Methods: The canals of 60 palatal roots of first molars were obturated with gutta-percha and
either a zinc oxide–eugenol–based or a resin-based sealer and re-instrumented: G1,
EndoFill/hand files; G2, AH Plus/hand files; G3, EndoFill/ProTaper; G4, AH Plus/ProTaper. Roots
were cleaved and examined with an optical microscope, and the amount of filling debris on
canal walls was analyzed on digitized images.
Conclusion: All groups presented filling debris in the 3 canal thirds after re-instrumentation.
Vinícius Reis Só et al. 2008
18. Heat
Using pluggers or heat carriers, electrically-heated spreaders or pluggers, such as the Touch ‘n Heat or
System B Heat Source.
Any softened gutta-percha clinging to the cooling spreader or plugger will be removed when the
instrument is withdrawn.
The rest of the softened gutta-percha in the canal is then removed with either hand or rotary NiTi files
as mentioned previously.
The procedure repeated until all of the root filling material is removed.
The heated instrument should be applied in intermittent short bursts and only in the straight part of
the root canal.
19. Solvents
Solvents have been advocated for many years to soften GP and assist in its removal.
A solvent is usually needed to remove well-condensed gutta-percha.
Traditionally, Chloroform was the solvent of choice and has been shown most effective. (Tamse et. al,
1986, Wilcox 1995).
However, issues regarding cytotoxicity if it comes into contact with periapical tissues have been raised,
and it has been classified as a potential carcinogen by the food and drug administration (1976). And a
potential risk to the dental team.
On the other hand, their is limited evidence of carcinogenicity.
When used carefully, chloroform is regarded as a safe and effective endodontic solvent.
22. Solvents
Xylene and eucalyptol dissolve gutta-percha slowly and only approach the effectiveness of
chloroform when heated.
Rectified turpentine has a higher level of toxicity than chloroform, and it produces a very pungent
odor in the operatory.
Halothane has been shown to be as effective a solvent as chloroform in several studies, but a more
recent study indicated that the time for removal of the root filling was longer than when using
chloroform.
The increased cost and volatility of halothane and the potential for idiosyncratic hepatic necrosis
make it less desirable to use as a gutta-percha solvent.
Although methylchloroform is less toxic than chloroform, it is also less effective as a solvent for
gutta-percha.
Both halothane and chloroform have been shown to affect the chemical composition of dentin and
may affect bonding strengths of adhesive cements to the altered dentin.
23. Evaluation of alternatives to chloroform in endodontic practice
Wennberg, Ørstavik (1989)
In this study, methylene chloride, methyl chloroform, tetrahydrofuran, xylol and eucalyptol were tested
for their capacity to dissolve or soften gutta-percha points compared with chloroform.
The effect of the test solvents was assessed by measuring the depth of penetration of a small indentor
of fixed weight and shape into a gutta-percha disk covered with the test solution for various time
periods.
Chloroform showed the most pronounced effect, followed by methylene chloride, tetrahydrofuran,
and methyl chloroform.
When both occupational health and gutta-percha solvent capacity were considered, Methyl
chloroform seemed to be an interesting alternative to chloroform.
24.
25. Solvents
Using an irrigating syringe, the selected solvent is introduced into the coronal portions of the
canals, which will then act as a reservoir for the solvent. Then, small hand files (sizes #15 and
20) are used to penetrate the remaining root filling and increase the surface area of the gutta-
percha to enhance its dissolution.
This procedure can be facilitated by using precurved, rigid files such as the C+ file (Dentsply
Maillefer).
26. Ultrasonic
A small size (e.g. size 15) endosonic file will suffice as it is not used to physically engage the root filling,
not used commonly.
The technique relies primarily on a combination of irrigation and ultrasonic vibration to loosen the
root filling, allowing it to be ‘‘floated’’ passively out of the canal.
The technique carries a very much lower risk of instrument fracture.
The endosonic file must not be run dry as the GP will be plasticized by the energized file, making it
difficult to remove the root filling intact.
27. Ultrasonic
The use of ultrasound in re-treatment is generally confined to hard pastes cements and sealers such as
GI cements or as final debridement.
Ultrasonic files activated without irrigation create frictional heat and can be used to plasticize gutta-
percha, hence facilitating its removal.
Disadvantages: The thermoplasticized gutta-percha tends to be forced against the root canal wall,
creating considerable debris; furthermore, the ultrasonic files can only be used in the straight part of the
canal. (Friedman, Moshonov and Trope 1993).
28.
29. Laser
A laboratory study investigated the potential application of a Nd:YAG laser in root canal re-treatment
used in a dry root canal. It was utilized alone or in combination with hand instruments to remove
various canal sealers and broken instruments.
There was concern about the excessive heat generated and the safety parameters so the study was
described as preliminary in nature.
The use of the Nd:YAG laser for removal of GP and fractured files. It was found that laser irradiation
was capable of softening GP and the addition of solvents did not improve the re-treatment process
either in terms of the time required for removal or the amount of gutta-percha remnants.(Vidueic et. al,
2003).
30. Removal of Thermafil GP
A gutta-percha carrier device or obturator is comprised of GP molded around a plastic or metal
carrier.
Retreatment of solid core materials is considered to be more complex and difficult than is the
case with removal of gutta-percha alone due to the presence of the solid carrier within the mass
of gutta-percha. The nature of the carrier and the level at which the metal carrier is severed will
determine the method used and complexity of the retrieval. Three types of carriers are found in
these systems: metal (stainless steel or titanium), plastic, and modified gutta-percha.
It is advantageous to determine prior to initiating treatment if there is a solid core obturation
in the root-filled tooth. The preoperative radiograph may show this because the stainless steel
carriers will exhibit a fluting effect on the radiograph; however, the titanium carriers rarely are
distinguishable from gutta-percha, and the plastic ones never are. Unfortunately, in most
instances, the clinician finds that he or she is dealing with a carrier-based obturator after initial
access to the pulp chamber.
31. Most studies employed traditional techniques in which one or more Hedstrom or K-files were used to
engage the plastic carrier and extract the Thermafil obturator; with or without solvent.
The principal difference between the removal of plastic and metal carriers is that the former deforms
when heat is applied. As a result, a variety of other techniques in addition to traditional hand files and
solvent can be used to facilitate removal.
Rotary techniques using either rotary NiTi files or Gates Glidden.
The removal of Thermafil can be problematic if the gutta-percha was stripped from the carrier. This
makes it very difficult to insert a hand or rotary file alongside the carrier as there is no surrounding GP.
The manufacturers have attempted to address this by producing only GP devices with plastic carriers
and placing a notch running along one side of the carrier to provide space in order to allow file insertion
and to facilitate removal.
Removal of Thermafil GP
32. Effectiveness of Three Different Retreatment Techniques in
Canals Filled With Compacted Gutta-Percha or Thermafil: A
Scanning Electron Microscope Study
Aim: To undertake an SEM investigation into the effectiveness of 3 different retreatment methods
(ultrasonic tips, NiTi rotary instruments, and K-file manual instruments) in removing warm vertically
condensed gutta-percha or Thermafil filling material from previously in vitro filled root canals.
Method: Thirty-six extracted roots were filled by using AH Plus as a sealer with Thermafil (18 roots) or
warm vertically condensed gutta-percha (18 roots). All fillings were removed up to the middle third
by using Gates Glidden drills. The retreatment was completed by using K-files (group 1), M-Two NiTi
rotary instruments (group 2), or ESI ultrasonic tips (group 3) in 12 roots each. Root canals were
irrigated by using 10% EDTA and 2.5% NaOCl. The samples were split longitudinally and observed by
scanning electron microscopy (100–2000X).
Conclusions: All retreatment techniques showed similar performances in terms of smear layer
morphology, debris, and surface profile. None of them completely removed filling debris from
dentinal tubules of apical third.
Pirani et al. 2009
33. Resilon Removal
Resilon (Resilon Research LLC) is a thermoplastic polyester polymer that is bonded into the canal
space using an unfilled resin bonding system (Epiphany, SybroEndo, Orange, CA).
Resin-bonded obturation systems have been advocated in the past; however, the difficulty to
retreat canals filled with this obturating material has prevented its widespread use.
The Resilon polymer itself is reported by the manufacturer to be soluble in chloroform and may
be removed by heat application, a behavior that is similar to gutta-percha.
There may also be a problem with removal of the unfilled Epiphany resin sealer, especially
because the sealer tags have been shown to penetrate deep into dentinal tubules and
presumably also into anatomic ramifications of the canal that need cleaning during retreatment.
34. Resilon Removal
After the Resilon core has been removed using heat and chloroform, the authors would
recommend the use of a resin solvent such as Endosolv-R (Septodont, Paris, France) to attempt
elimination of the unfilled resin sealer prior to instrumentation.
35. Paste Retreatment
Many of the pastes used, such as N2 or RC2B, contain formaldehyde and heavy metal oxides and
so are toxic and potentially present a danger to the patient’s health, both local and systemic, if
overextended beyond the confines of the root canal system.
For purposes of retreatment, paste fills can be categorized as soft or hard, and all should be
considered potentially toxic.
Great care should be exercised when removing the paste to avoid overextension, potentially
severe postoperative pain, and possible paresthesia/dysesthesia from the paste’s potential
neurotoxicity.
Soft pastes are generally easy to remove using crown down instrumentation with copious
sodium hypochlorite irrigation to minimize extrusion. Greater difficulty arises when the paste is
set hard.
36. Paste Retreatment
Following access preparation and coronal orifice exposure, the paste is probed with an endodontic explorer and
files. If hard and impenetrable, then the coronal paste can be removed with burs or a straight, tapered ultrasonic
tip in the easily accessible straight portions of the canal using magnification and illumination.
Once the canal curvature is reached, further use of this method will result in damage to the canal walls and
possible perforation.
Precurved, small hand files are inserted to probe the apical area. Many times the density of the paste filling
material decreases in the apical extent of the fill so that penetration to the apex may be possible.
If not, a solvent must be used to attempt to soften the remaining paste. The choice of solvent is usually made by
trial and error starting with chloroform. If that does not soften the material in a reasonable amount of time and
does not allow penetration with small files, then the chloroform is wicked out of the canal and another solvent is
chosen. There are two frequently used solvents for paste fills: Endosolv-E and Endosolv-R (Septodont, Paris,
France).
The Endosolv-E is selected if the paste contains zinc oxide an eugenol, and the Endosolv-R is chosen for resin-
based pastes.
37. Paste Retreatment
The chosen solvent should be placed in the access, and attempts should be made to penetrate
the paste with hand or ultrasonic files; however, care must be taken to avoid creating a ledge or
other defect in the canal that may preclude successful retreatment.
The progress is frequently slow, and the clinician may elect to leave some solvent in the canals
between appointments to soften the paste.
Ultrasonically activated files have been advocated for use in penetrating hard-set pastes in the
curved apical segments of canals.
The ultrasonic energy breaks up the paste, and the irrigation floats the fragments in a coronal
direction until the apical terminus is reached. This technique is reported to be time consuming,
and care must be exercised to avoid instrument separation, perforations, or alteration of canal
morphology.
On occasion despite all best efforts, the paste cannot be removed from the tooth, so apical
surgery or extraction should be considered in these cases.
38. Silver Point Removal
Many of the same techniques described for removing separated instruments in the following
section apply to the removal of silver points.
Silver points have a minimal taper and are smoothed sided, and corrosion may loosen the cone
within the preparation.
Therefore, the clinician should encounter a much easier time removing them than would be
the case with separated instruments, which may be mechanically engaged into canals.
Silver point canal preparation techniques produced a milled, round preparation in the apical 2
to 3 mm of the canal and, coronal to that, the clinician will frequently find space between the
round silver point and the flared canal walls that can usually be negotiated with hand files
facilitating point removal.
39. Uncovering the head of the silver point with ultrasound, taking care not to
touch the silver point to avoid weakening or fracturing it.
loosened by removing whatever is encasing it (e.g. Solvent to remove
sealers surrounding it).
If the head of the silver point is visible and it can be engaged with a
surgical hemostat, artery forceps, a spoon excavator, or specially designed
instruments such as Stieglitz forceps, removal may be executed.
Consider using the braided Hedstrom file technique.
Silver Point Removal
40. If this proves impossible, specialized kits are available which generally work on the
principle of trephination:
1. Masseran kit: A selection of trephines.
2. Cancellier kit or Endo extractor: A series of 4 hollow tubes; the required
size is chosen and cyanoacrylate adhesive is used to facilitate removal.
3. Meitrac system: A set of trephines and extractors; principally for use in the
coronal aspect of the canal.
4. Instrument Removal System: A device, available in two sizes, designed to
grip the head of the loose silver point.
Silver Point Removal
41. After the silver point is removed, it is important that subsequent instrumentation procedures
be performed in a crown-down manner to minimize extrusion of the silver corrosion products
into the peri-radicular tissues to decrease the occurrence of painful acute flare-ups.
Occasionally, the apical portion of a silver point will separate upon the removal attempt. If it
cannot be bypassed or removed, then the case should be completed and followed carefully.
Apical surgery or extraction could be necessary in the future.
Silver Point Removal
42. Removal of mineral trioxide aggregate
Since MTA also sets hard, removal may be difficult if not impossible. At present, there are no
solvents available for dissolving MTA.
Boutsioukis et al. 2008 evaluated the ability to remove MTA root fillings using ultrasound and
rotary NiTi files. The teeth were placed into two experimental groups and MTA was placed with a
lentulo spiral filler into the entire length of the canal. In one group, a gutta-percha cone was also
inserted to within 2mm of the working length to facilitate re-treatment. When it came to
removal, rotary NiTi instruments were unable to penetrate the MTA and could only access the
canal if there was gutta-percha present. A combination of rotary NiTi files and ultrasonic
instruments was more effective than rotary instruments alone. However, remnants of MTA were
detected in all of the re-treated canals. In this study, only teeth with straight roots were used.
There is currently no literature on the removal of MTA from curved canals; this is likely to be a
very challenging and risky procedure.
Boutsioukis C, Noula G, Lambrianidis T. Ex vivo study of the efficiency of two techniques for the removal of Mineral Trioxide Aggregate used as a root canal filling material. J Endod 2008.
43. Assessment of Root Canal Filling Removal
Effectiveness Using Micro–computed
Tomography: A Systematic Review
Aim: This systematic review aims to discuss the effectiveness of different instrumentation
procedures in removing root-canal filling materials assessed by micro-computed tomography.
Methods: An electronic search in PubMed and major endodontic journals was conducted using
appropriate key words to identify investigations that examined the effectiveness of obturation
material removal assessed by microcomputed tomography.
Conclusions: The application of different instrumentation protocols can effectively, but not
completely, remove the filling materials from the root canal system. Only hand instrumentation
was not associated with iatrogenic errors. Reciprocating and rotary systems exhibited similar
abilities in removing root filling material. Retreatment files performed similarly to conventional
ones. Solvents enhanced penetration of files but hindered cleaning of the root canal. The role of
irrigant agitation was determined as controversial.
Rossi-Fedele et al. 2017
44. Procedural complications and risks
The main risks of complications when removing remaining root filling materials include perforation,
blockages, loss of working length, ledging, and fracture of the removal instrument.
Rotary NiTi files are prone to fracture in certain circumstances, but the incidence may be reduced in
experienced hands and when care is exercised. However, there is a lack of evidence that any type of
rotary file, landed or non-landed, end-cutting or safe-ended, is associated with a higher risk of
complications.
Apical extrusion of material:
The apical extrusion of material during re-treatment may, potentially, cause an untoward, sometimes
acute, flare-up.
Time taken to remove root fillings:
Re-treatment is more time-consuming compared with initial root canal treatment. More efficient and
more rapid techniques for removal of root filling materials would be an advantage.