Tutamen, established in 2005, is an industry leader in engineering, manufacturing, and product development, known for its integrity, high-quality craftsmanship, and on-time delivery. The company offers a wide range of services including product development, OEM design, and mass production, supported by advanced manufacturing facilities in China and the US. With a strong emphasis on quality control and innovative design, Tutamen aims to optimize production processes and ensure customer satisfaction.

2. WHAT MAKES US BETTER?
9/29/2015
Tutamen is built around the
simple ideal that it is not
necessary to sacrifice high quality
parts, world class customer
service, and innovative design for
competitive pricing.
We have a reputation for
integrity, quality craftsmanship,
on time delivery and excellence
in management.

3. • Industry leader in engineering, manufacturing and product
development
• Manufacturing facilities in China, additional support in the US
• 60 000sqft facility
• Established in 2005
• 300+ employees
- Engineering
- Production
- Quality Control
- Research and Design
- Project Management
- Customer Service
• Certification
- ISO 9001
- AS 9100 (in process)
COMPANY OVERVIEW
9/29/2015

4. COLLABORATORS
9/29/2015

5. SERVICES OFFERED
PRODUCT DEVELOPMENT
MANUFACTURING AND OEM
DESIGN AND ENGINEERING
MASS PRODUCTION
SUPPORT OPERATIONS
9/29/2015

6. PRODUCT DEVELOPMENT
• Product Design
• Research & Development
• Reverse Engineering
• Concept 3D Design
• Cost Reduction/Material Selection
• Tool Design
• Packaging Design
• Production & Assembly
• Prototyping
• Testing
9/29/2015

7. OEM
Original Equipment Manufacturing
DFM (design for manufacture) helps to identify potential
problems and customer concerns before moving into production
by proactively designing products to:
1. Optimize all manufacturing functions: fabrication, assembly,
testing, procurement, shipping and delivery.
2. Assure the best cost, quality, reliability, regulatory compliance,
safety, time-to-market, and customer satisfaction.
Our mass production team is constantly working to improve yields,
minimize waste, and cut out unnecessary cost. We thrive for
optimization through innovative production set up of mass
manufacturing.
9/29/2015

8. QC – QUALITY MONITORING
Every step for all products and
processes are closely monitored
by our QC team. Machine operators
are trained to look for any
abnormalities in units during the
production process. The quality
team does a daily check on all parts
allowing production engineers to cut
down on failures.
9/29/2015

9. CNC CAPABILITIES
• Complex multifaceted, high-precision parts are our specialty.
• Capability to run 24 hours a day with three shifts in order to keep up
with large volume orders we can quickly and efficiently respond to our
customers demands, requirements and future needs.
• Our CNC machining facility has the capabilities to provide personalized
solutions by offering a variety of methods for precision produced
parts.
• Milling, Lathe Turning, 5-axis, CNC Swiss Machining, KNC.
• Riveting, Welding, Marking.
• Inspection, Fixturing, Deburring.
9/29/2015

10. • 3 X Swiss Turn Auto Feed Lathe/Mill
• 22 x 4 Axis KNC Machines
• 30 x Lathes (4 auto feed)
• 4 x Custom Tube Cutters
CNC EQUIPMENT
9/29/2015

11. METAL STAMPING
• ISO quality approval and
commitment to skilled
engineering, conformity, design
and tooling fabrication.
• We have the capacity and the
capability to mass–produce parts
with excellent quality and short
term turn around.
9/29/2015

12. METAL STAMPING EQUIPMENT
• 4 x 25 ton press
• 4 x 45 ton presses
• 1 x 60 ton press
• 2 x 160 ton presses
• 1 x 200 ton press
9/29/2015

13. PLASTIC INJECTION
• With in–house resources to design and manufacture plastic injection
tools, we have a competitive edge in product understanding and
adopting to new situations.
• Proficient operation standards have enabled us to run on high yield
rates reducing waste and insuring reliable quality and quantity
deliveries.
9/29/2015

14. PLASTIC EQUIPMENT
Our facility houses 19 plastic presses all equipped with robotic arms for
automation insuring optimal cycle time is reached and maintained.
• 2 x 80 ton presses
• 1 x 140 ton press
• 1 x 150 ton press
• 2 x 200 ton presses
• 1 x 250 ton press
• 2 x 280 ton presses
• 2 x Material Grinders
• 2 x Color Mixers
• 9 x Raw Material Bakers
9/29/2015

15. DIE CASTING
• Tutamen is partnered with a local Die Casting facility, capable of
making tooling and production.
• Materials we work with include magnesium, aluminum and zinc.
• Tutamen engineers and QC team have implemented our high
standards of production and worker safety procedures at this facility,
as well as all necessary quality reports and processes.
9/29/2015

16. DESIGN ENGINEERING
Industrial design and product engineering services are viewed at Tutamen
as a visibly co–dependent and highly integrated phase of the product
development process.
Design engineering encompasses overall concept development, creative
design and product engineering relative to ergonomics, product
architecture, design for manufacturing and product cost.
The goal is to develop innovative solutions based on the development of
sound design criteria.
9/29/2015

17. Our team excels at designing from the “ ground up” and having experience
of developing and optimizing clients products that have secured world
wide patents.
The concept design stage of any project is most important; it sets the
agenda and delivers “the vision”. We work closely with our customers to
turn broad ideas into tangible, affordable production solutions.
Our team has the experience and skills to help you at any stage from
concept design, tooling design to production design.
DESIGN
9/29/2015

18. ENGINEERING
Our scope of engineering includes part/assembly design, detailing,
quoting, and analysis for manufacturability. Through collaboration with
customers, Tutamen engineers determine the most efficient means of
manufacture while maintaining required tolerance and constantly push
toward optimization.
Plastics:
Plastic engineers will design and review tool drawings and flow diagrams
before the are approved to be made. Once the tooling is complete an
engineer will work with the production department to create standard
operating procedures and optimization of the process.
9/29/2015

19. Metal:
Our metal engineers work to design and optimize tool paths and process
for Tutamen CNC department. The will also review and approve metal
stamping and Die Cast tooling.
Automation and Finishing:
Our automation and finishing engineers work to minimize, as much as
possible, human contact with the products with the goal of maximizing
yield. This includes creating fixtures for mass production, experimenting
with different finishing techniques ( sandblast, laser etch, polishing, PVD,
anodize, plating etc.).
ENGINEERING CONTINUED
9/29/2015

20. ASSEMBLY & FINISHING
9/29/2015
Assembly
• Ultrasonic Welding
• Labeling & Packaging
• Calibration
Finish Machining
• Honing
• Lapping
• Polishing
• Burnishing
• Deburring
• Laser Etching
• Sand Blasting

21. 9/29/2015
ASSEMBLY & FINISHING
Plating
• Electroplating
• Electroforming
• Selective/Brush Plating
Coating
• Pad Printing
• Silk Screening
• Polishing
Surface Treatments
• Anodizing
• Hardening
• Heat Treatment
Packaging
• Customization
• Design

22. GUARANTEED SATISFACTION
Tutamen uses a horizontal
management style where a complete
and comprehensive review of all
engineering, related specifications,
materials and required processes as
defined by the customer are fully
understood and executed.
To insure customer satisfaction all
products we make have both Standard
Operating Procedure (how we make the
part), and Standard Inspection
Procedure (how we inspect the part)
developed with the customer.
9/29/2015

23. • ISO 9001
• AS 9100 ( in process )
• Employee Code of Conduct
adheres to EICC & FCPA
standards.
View Code of Conduct here:
Tutamen Code of Conduct pdf
STANDARDS & REGULATIONS
9/29/2015

24. MATERIALS
• Regular plastics: PET, HDPE, LDPE, PVC, PP, PS
• ABS, PBT, PC, PE, PEEK, PETG, PMMA, PPO, PPS, PU, TPE, Nylon 6-6,
Acetal, Delrin, Ultem, Silicon Rubber, Flexible PVC
• Various Elastomers, such as Santoprene, Neoprene, Chimei synthetic
rubber
• Fiber filled: Fiberglass filled, Carbon filled, Steel fiber filled
• Various metals and alloys, all grades of cast steels and irons,
magnesium
9/29/2015

25. • High Temperature
• Over Molding
• Fiber Filled
• Insert Molding
• Plastic Gears
• Multiple Direction Sliders
• Precision Molding
• Assembly & Secondary Operations
MOLDING
9/29/2015

26. QUALITY CONTROL
Tutamen’s quality standards have allowed our assembly and finishing
cells to work with high level clients that expect nothing but perfection.
With strict process control measures we are able to fine-tune our
component operation to ensure high yields and low cost.
Our employees are trained to not only find flaws or defects on the QC
line but to also work closely with engineers and operators to solve any
issues at the source.
Tutamen has high standard clean rooms, which allow us to
export market ready product. By minimizing human contact and
implementing rigorous cleaning standards shipped goods can exceed
quality expectations.
9/29/2015

27. 9/29/2015

28. QC PROCESS
Everything produced in Tutamen factories must pass strict Quality Control
guidelines before it is released for shipping. There are four stages of our
QC process which work in unison to detect any issues as soon as they
might appear.
In-House Quality Process:
• In-line QC:
Operators are trained to inspect ever piece as soon as it come off the
machine. First they do a cosmetic check followed by a dimensional check
for any critical dimensions, if necessary.
• Cleaning / QC / Packaging:
Once the part is finished production and any other finishing process it
goes to final QC / packaging. Here it is cleaned and inspected, all critical
dimensions and cosmetic standards are checked.
9/29/2015

29. 9/29/2015
• Outgoing QC:
QC personnel pick a percent of random samples from the shipment (may
change depending on quantity, yield, or during a ramp) to do a thorough
cosmetic and dimensional inspection.
• Data collection / CPK:
During all ongoing production projects our QC office does daily CPK
(process capability index) for all mass production parts. Tutamen has in-
house capability to set or follow automatic CMM programs.
QC PROCESS CONTINUED

30. QC EQUIPMENT
• 1 X CMM
• 1 x Two Dimension Measuring
Instrument
• 1 x Tension Meter
• 1 x Torsiometer
• 1 x Pantone Color Atla
• 1 x Electronic Scale
• 1 x Durometer
• 1 x Micrometer
• 3 x Microscope
• 1 x 3D Printer
• 1 x Standard Light Box
• 1 x Height Meter
• 1 x High-temperature Box
• 10 x Gono Go Gauge
• 1 x Marble Table
9/29/2015