1. Design Technology Process Journal
th
Date: March, 8 , 2011
Name: Jee Yeon Park
Title: Screwing base+stem together, and screwing petals+stem together
What did I do?
When I got into the workshop, I chose the proper screw
to fit into the hole that I have drilled in last lesson. I took
out the two same screws and started to put it in by
using the screwdriver. When I was finished with
screwing two screws through the bottom of the base, I
started to drill holes on the petals by using cordless
drill. By using thicker type of drill bit, I drilled on the top
surface of the petals. I used another drill bit to drill on
the stem, which was thicker than the other one. I chose
Picture 1: Picture of me using screw driver to
4 same small screws that would fit into the hole. When,
screw the screws
I got the proper size of the screw, I got the screwdriver
to put the screws by attaching the petals and stem.
Emotions
During this lesson, I was very pleased that I could see
the end of my project. I am now at the end stage of
making the project. I was so excited that I could be able
to finish putting the last part of the project. I was able to
predict that I could start painting.
IB Learner Profile & AOI
From today’s lesson, I continued to put the last parts
that are left. I was being a risk taker during this lesson
because I took a risk of finishing the stage of putting
things together by the end of the lesson. I think this lesson was related to community and service
because most of the time in today’s lesson, Mr.
Anderson gave me some advices to my project and Picture 2: Picture of me using cordless drill to
helped me when I was struggling. drill a hole on the petals.