ifm electronic has added new features and functions to the ifm product line of speed monitors. In addition to the high input frequency of up to 60,000 pulses / minute and configurable functions, these also include an extended operating temperature range up to -40 °C. The newly developed luminous OLED display allows an optimal indication of all display values.

1. Press release wpi 476 / 0213
Area: Sensors for motion control
Speed monitor family with extended functions
Essen, February 2013 – ifm electronic has added new features and
functions to the ifm product line of speed monitors. In addition to
the high input frequency of up to 60,000 pulses / minute and
configurable functions, these also include an extended operating
temperature range up to -40 °C. The newly developed luminous
OLED display allows an optimal indication of all display values.
The speed monitors calculate the rotational speed by evaluating pulses. If
the current values are above or below the set limit values, the transistor
and relay outputs are switched. This allows reliable overspeed and
standstill detection.
Versions
The speed monitors DD2501, DD2503 and DD2603 monitor the rotational
speed of one channel with two separately adjustable limit values. A
separate output is assigned to each limit value. The speed monitors
DD2505 and DD2605 monitor two separate input channels, each having
one switch point.
User-friendly and reliable
The high-contrast luminous OLED display and the menu-guided
parameter setting are designed for maximum user-friendliness. Speed
and standstill are monitored reliably and accurately with the new features,
allowing an immediate response in case of malfunction. Therefore,
expensive consequential damage is part of the past.
wpi_476_print.jpg
New speed monitor with
extended functions.
Text and images are available on our website at: www.ifm.com/gb/press
Contact
ifm electronic gmbh
Friedrichstr. 1
45128 Essen
Germany
www.ifm.com
E-Mail: info@ifm.com
Simone Felderhoff
Press officer
Tel. +49 (0)201 / 24 22-1411
simone.felderhoff@ifm.com
Dipl.-Ing. Andreas Biniasch
Technical writing
Tel. +49 (0)201 / 24 22-1425
andreas.biniasch@ifm.com