Presentation1 for kazakhstan oil & gas summit 2015
•Download as PPT, PDF•
1 like•789 views
This document provides an overview of environmental protection measures for oil and gas exploration and production. It discusses topics like exploration surveying, drilling operations, production processes, pollution prevention, water treatment, oil spill response, environmental impacts on ecosystems, and decommissioning. It also covers regulatory frameworks, management systems, impacts of drilling fluids, assessing alternatives, and stakeholder understanding for reducing fossil fuel impacts.
Report
Share
Report
Share
Recommended
Mpw presentation (4)
This document discusses management of produced water from oil and gas operations using the 3R's (reduce, reuse, recycle) and 3E's (efficiency, environmental acceptability, economic viability) frameworks. It outlines various produced water treatment and disposal technologies currently used, including media filtration, reverse osmosis, nanofiltration, and beneficial reuse options. The document recommends choosing combinations of solutions tailored to each situation considering technical, economic, regulatory and environmental factors. Overall management of produced water is important given water scarcity issues and must involve awareness building and education efforts at all levels.
Investing in Kazakhstan's Oil and Gas sector
Presentation that was done at Kazakhstan Oil&Gas Summit 2015, 23rd&24th February// Rixos Hotel, Almaty
Oklahoma Water Survey Presentation
This presentation provides some general information relating to water management in unconventional resource plays.
EVALUATION OF WATER MANAGEMENT OPTIONS FOR MORE
This document evaluates water management options in Palestine to increase food security using the WEAP simulation model. It summarizes the current state of water resources and agriculture in Palestine, which faces restrictions from Israeli occupation. Three political scenarios are modeled from 2003-2025. Simulations show political status greatly impacts water availability and unmet demand, affecting food security. Water management modules like trading and pricing can reduce future water demand and positively impact food security in Palestine.
Karen Rollins - Backcountry Black Water Management Options Analysis
This document analyzes black water (sewage) management options for remote alpine and subalpine huts in Canada's mountains. It evaluates five options - pit toilet, barrel fly-out, incinerating toilet, carry-out, and composting toilet - on their life cycle costs, environmental impacts, and applicability to different locations that vary in elevation and visitor numbers. Composting toilets are found to generally have lower costs and impacts than other options. Additional research is recommended into improving and standardizing the composting process, separating and treating urine, and combining dehydration and incineration systems.
Produced Water | Session XI - Dave Stewart
The document discusses issues around produced water from energy development and opportunities for water reuse. It notes that produced water volumes can be significant, especially from unconventional sources like coal bed methane. While fracking uses a small percentage of total water, agricultural use is much larger. Produced water reuse projects could help address water shortages, but regulatory hurdles around water rights and discharge standards must be overcome. Treatment technologies are improving and customized approaches may enable wider reuse of produced water in the future.
The effect of associated water on the environment
Associated water is any water that is present in a reservoir with the hydrocarbon resource
which is produced to the surface with the crude oil or natural gas.
Produced Water | Session X - Alleman
This document summarizes water management considerations for hydraulic fracturing operations in the Bakken shale formation in North Dakota. It discusses water use, sourcing, transportation, storage, treatment and disposal of produced water. The average water use per well is 2.1 million gallons, ranging from 1 to 9.5 million gallons, with primary sources being municipal fresh water and Lake Sakakawea. Produced water quality ranges from 30,000 to 250,000 ppm TDS. Approximately 20% of produced water is reused for fracturing while the remaining 80% is disposed via underground injection.
Recommended
Mpw presentation (4)
This document discusses management of produced water from oil and gas operations using the 3R's (reduce, reuse, recycle) and 3E's (efficiency, environmental acceptability, economic viability) frameworks. It outlines various produced water treatment and disposal technologies currently used, including media filtration, reverse osmosis, nanofiltration, and beneficial reuse options. The document recommends choosing combinations of solutions tailored to each situation considering technical, economic, regulatory and environmental factors. Overall management of produced water is important given water scarcity issues and must involve awareness building and education efforts at all levels.
Investing in Kazakhstan's Oil and Gas sector
Presentation that was done at Kazakhstan Oil&Gas Summit 2015, 23rd&24th February// Rixos Hotel, Almaty
Oklahoma Water Survey Presentation
This presentation provides some general information relating to water management in unconventional resource plays.
EVALUATION OF WATER MANAGEMENT OPTIONS FOR MORE
This document evaluates water management options in Palestine to increase food security using the WEAP simulation model. It summarizes the current state of water resources and agriculture in Palestine, which faces restrictions from Israeli occupation. Three political scenarios are modeled from 2003-2025. Simulations show political status greatly impacts water availability and unmet demand, affecting food security. Water management modules like trading and pricing can reduce future water demand and positively impact food security in Palestine.
Karen Rollins - Backcountry Black Water Management Options Analysis
This document analyzes black water (sewage) management options for remote alpine and subalpine huts in Canada's mountains. It evaluates five options - pit toilet, barrel fly-out, incinerating toilet, carry-out, and composting toilet - on their life cycle costs, environmental impacts, and applicability to different locations that vary in elevation and visitor numbers. Composting toilets are found to generally have lower costs and impacts than other options. Additional research is recommended into improving and standardizing the composting process, separating and treating urine, and combining dehydration and incineration systems.
Produced Water | Session XI - Dave Stewart
The document discusses issues around produced water from energy development and opportunities for water reuse. It notes that produced water volumes can be significant, especially from unconventional sources like coal bed methane. While fracking uses a small percentage of total water, agricultural use is much larger. Produced water reuse projects could help address water shortages, but regulatory hurdles around water rights and discharge standards must be overcome. Treatment technologies are improving and customized approaches may enable wider reuse of produced water in the future.
The effect of associated water on the environment
Associated water is any water that is present in a reservoir with the hydrocarbon resource
which is produced to the surface with the crude oil or natural gas.
Produced Water | Session X - Alleman
This document summarizes water management considerations for hydraulic fracturing operations in the Bakken shale formation in North Dakota. It discusses water use, sourcing, transportation, storage, treatment and disposal of produced water. The average water use per well is 2.1 million gallons, ranging from 1 to 9.5 million gallons, with primary sources being municipal fresh water and Lake Sakakawea. Produced water quality ranges from 30,000 to 250,000 ppm TDS. Approximately 20% of produced water is reused for fracturing while the remaining 80% is disposed via underground injection.
EN - Alternative use of water in the upstream and downstream oil&gas industry
Degrémont Industry will attend at the Society of Petroleum Engineers workshop on « Integrated Water Management in the upstream and downstream Oil & Gas industry» December 3-5 in Lisbon (Portugal). This fifth workshop held between European and Asia-Pacific locations since 2008 will draw attendees from all the major oil and gas producing regions around the globe and will explore how our understanding of the technologies for integrated water management can improve greenfield projects. Bertrand Garnier, our Technical & New Offers Director will speak about the alternative use of water facing water scarcity, stricts regulations and costs optimisation…
Produced Water | Session II - John Veil
This document discusses produced water, which is water brought to the surface during oil and gas production. It defines produced water and its characteristics, such as high salinity. It provides data on produced water volumes in the US and internationally, and the different management practices used. Finally, it outlines how the water needs and volumes produced vary between different types of hydrocarbon production such as conventional, coalbed methane, shale gas, and oil sands. While shale gas receives significant attention, it accounts for less than 6% of total produced water in the US.
Produced Water | Session XII - A. Judson Hill
NGP Energy Capital Management is a premier investment franchise that has managed $13 billion over 23 years focused on natural resources, including oil, gas, and water infrastructure projects. They have a top quartile investment track record with a 31% gross IRR since 1988. NGP's investment thesis is to partner with executive teams in the energy and water sectors using their domain expertise and capital to address critical resource challenges like increasing water scarcity through strategies like recycling and desalination.
Produced Water | Session III - John Veil
Offshore oil and gas production in the Gulf of Mexico generates large volumes of produced water. Nearly 91% of the 587,353 barrels per day of produced water from offshore wells is treated on platforms and discharged into the ocean, as regulated by NPDES permits. A variety of physical, chemical, and biological treatment technologies are used to clean produced water before discharge to meet permit limits for oil and grease.
Oilfield Produced water management
Produced water is water produced from oil and gas extraction operations. It originates from hydrocarbon-bearing formations and can also migrate from adjacent formations. Global produced water volumes are estimated at over 100 billion barrels per year. Produced water is chemically complex, saline, heterogeneous, and can contain toxic substances and process chemicals. Common management practices for produced water include reuse in enhanced oil recovery, surface disposal, underground injection, and beneficial use. More research is needed to improve treatment technologies and develop more sustainable management methods for the large volumes of produced water.
Produced water overview ppt, Oct 2011, M Rashid
This document discusses produced water handling and treatment technologies. Produced water is a byproduct of oil and gas production that contains dispersed oil, solids, production chemicals and heavy metals. It requires treatment before disposal or reuse. The document outlines various separation and treatment technologies used, including settling, flotation, filtration and advanced processes. It provides guidelines for selecting technologies based on water characteristics and disposal criteria. Future developments discussed include downhole separation and subsea treatment to reduce volumes brought to the surface.
Management Options and Policy Guidelines for Use of Poor Quality Ground water...
the amount and quality of irrigation water available in the arid and semi-arid regions of the world are the main limiting factors to the agricultural productivity. Saline-sodic irrigation water, coupled with low annual rainfall and high evapotranspiration in the arid and semi-arid regions, not only results in accumulation of soluble salts in soil solution but also exhibit external signs of salt toxicity in the plants. therefore research works are needed to find the best cultivation conditions for uses of p
Produced Water | Session VI - Ben Sebree
This document discusses how recycling produced water from oil and gas production can help address Texas' growing water supply challenges. It notes that Texas' population and water demand are projected to increase substantially by 2060 while supplies are expected to decline. Recycling two-thirds of the roughly 7 billion barrels of produced water generated annually could meet 3.3% of the state's current water demand and 26% of the projected shortage in 2020, providing an unexpected solution to the state's water crisis through beneficial reuse of this resource.
Produced Water | Session X - Steve Jester
Produced water reuse for hydraulic fracturing in the Eagle Ford presents several challenges. Blending produced water with fresh water can allow for some reuse, but compatibility issues may lead to premature crosslinking or scaling. Developing fracturing fluid packages specifically for more challenging water sources is needed. The feasibility of produced water reuse depends on an evaluation of compatibility, logistics, reliability, cost, and environmental factors, and has not proven to be a single industry-wide solution for reducing freshwater use.
Produced Water | Session IX - JP Nicot
This document summarizes Jean-Philippe Nicot's presentation on the source and fate of hydraulic fracturing water in Texas. It shows that hydraulic fracturing water use in Texas increased from 36,000 acre-feet in 2008 to 81,500 acre-feet in 2011, but still represents a small portion of total water use in the state. The source of fracturing water varies by region, with some areas relying more on groundwater or brackish water. Produced water rates decline over time but vary significantly between wells.
Walnut Shell Filters - Oil & Gas
This must the discovery of the decade. Walnut shells are used to purify water from any sort of Contamination and has been a blessing for the Oil & Gas Sector.
Produced Water | Session XII - David Muchow
The document discusses increasing investor and public support for hydraulic fracturing (fracking). It outlines various risks of fracking including environmental risks like water and air pollution, operational risks, regulatory and legal risks, and financial risks. The document argues that building trust with investors and the public is essential to enhancing support for fracking. Greater disclosure of fracking operations and facts could help address misinformation and build trust, but must be balanced with protecting company proprietary information. Industry standards and cooperation between industry and government are also important to managing risks and building confidence.
Produced Water | Session XI - Brent Halldorson
The document discusses 3 case studies of recycling and reusing oilfield water:
1) Devon Energy used a mobile recycling facility to recycle over 900 million gallons of flowback and produced water into distilled water for hydraulic fracturing in the Barnett Shale.
2) A customer used produced water as a source for freshwater creation using mobile natural oxidation facilities, reducing disposal volumes and extending the life of disposal wells. Produced water brine was reused for drilling.
3) A mobile clarifier was used to treat high-capacity Eagle Ford flowback and produced water, removing solids and contaminants to allow reuse in nearby fracturing.
Produced water treatment_presentation
The document presents a produced water treatment system with the main objective of removing oil from water. It includes produced water skim tanks to reduce oil content from 1000 ppm to 100 ppm, a skimmed oil vessel to collect removed oil, water injection tanks and pumps to inject treated water, and waste water ponds and equipment to handle excess produced water. Challenges mentioned include effective oil-water separation performance, operating within design limits, and preventing environmental pollution.
Produced Water | Session XI - Alleman
This document summarizes strategies and technology needs for produced water management in unconventional oil and gas resource plays. It notes that 1-3 million additional wellbores will be needed to fully develop US shale resources, requiring increased use of brackish water, treatment technologies, and centralized facilities. Produced water management options include disposal via injection wells, surface discharge, beneficial use, and reuse. Reuse is increasingly common where fresh water is limited and injection well capacity is restricted. Produced water quality and volume varies between plays. Treatment goals include reducing dissolved solids for discharge/reuse and reducing volume for disposal. As fresh water demands grow, more reuse of produced water and saline groundwater is expected, requiring technologies to make these strategies
Produced Water Treatment to Enhance Oil Recovery
This document discusses water treatment technologies for the oil and gas industry. It covers upstream, produced, and downstream water treatment. Upstream treatment includes produced water separation and reinjection. Downstream treatment involves process water treatment and wastewater treatment for refineries and petrochemical plants. The document provides an overview of various separation, filtration, and disinfection technologies used at each stage of water treatment in the petroleum industry.
Water pollution in petroleum industry
The principal sources of water pollution in the petroleum industry are produced water, drilling fluids and cuttings, process and drainage water, sewage, spills and leaks, and cooling water. Drilling fluids and cuttings can affect benthic organisms if discharged into oceans, while their high pH and salt levels pose risks to freshwater. Produced water is one of the largest waste streams and contains inorganic and organic compounds; its disposal requires evaluation and treatment. Proper treatment and disposal of drilling fluids, cuttings, and other wastes are needed to minimize environmental impacts.
Water Quality, Quantity, and Management: Lessons from the Marcellus Shale Reg...
Water Quality, Quantity, and Management: Lessons from the Marcellus Shale Reg...Cary Institute of Ecosystem Studies
Presentation by Radisav D. Vidic,
University of Pittsburgh, for a hydrofracking forum hosted by the Cary Institute of Ecosystem Studies in Millbrook, NY on May 5, 2012.Internship Presentation
The document discusses environmental impact assessment and monitoring services provided by CPTL Envirotech Designers & Pollution Control. It summarizes the organizational profile, services including air, water, noise monitoring and environmental impact assessment. It then discusses a project undertaken for Vardhaman Adarsh Ispat Pvt Ltd, including components of Form 1 and prefeasibility report required as per GOI notification to apply for environmental clearance for the proposed expansion project.
Coastal Road Project
Developing Projects in an Environmental and Social Management Framework - A presentation by Dr. Prasad Modak
Green building.pptx
The document discusses the need for sustainable construction practices, known as green buildings, in Lagos, Nigeria. It outlines how traditional building practices negatively impact the environment through energy use, air and water pollution, and waste. Green buildings aim to reduce these environmental impacts through efficient energy and water use, renewable materials, and reducing waste. The first LEED-certified commercial building in Nigeria is highlighted as an example. The document argues that adopting green building standards and certification systems, updating building codes, training professionals, and integrating green practices into government policy can help promote sustainability in the construction sector in Lagos.
More Related Content
Viewers also liked
EN - Alternative use of water in the upstream and downstream oil&gas industry
Degrémont Industry will attend at the Society of Petroleum Engineers workshop on « Integrated Water Management in the upstream and downstream Oil & Gas industry» December 3-5 in Lisbon (Portugal). This fifth workshop held between European and Asia-Pacific locations since 2008 will draw attendees from all the major oil and gas producing regions around the globe and will explore how our understanding of the technologies for integrated water management can improve greenfield projects. Bertrand Garnier, our Technical & New Offers Director will speak about the alternative use of water facing water scarcity, stricts regulations and costs optimisation…
Produced Water | Session II - John Veil
This document discusses produced water, which is water brought to the surface during oil and gas production. It defines produced water and its characteristics, such as high salinity. It provides data on produced water volumes in the US and internationally, and the different management practices used. Finally, it outlines how the water needs and volumes produced vary between different types of hydrocarbon production such as conventional, coalbed methane, shale gas, and oil sands. While shale gas receives significant attention, it accounts for less than 6% of total produced water in the US.
Produced Water | Session XII - A. Judson Hill
NGP Energy Capital Management is a premier investment franchise that has managed $13 billion over 23 years focused on natural resources, including oil, gas, and water infrastructure projects. They have a top quartile investment track record with a 31% gross IRR since 1988. NGP's investment thesis is to partner with executive teams in the energy and water sectors using their domain expertise and capital to address critical resource challenges like increasing water scarcity through strategies like recycling and desalination.
Produced Water | Session III - John Veil
Offshore oil and gas production in the Gulf of Mexico generates large volumes of produced water. Nearly 91% of the 587,353 barrels per day of produced water from offshore wells is treated on platforms and discharged into the ocean, as regulated by NPDES permits. A variety of physical, chemical, and biological treatment technologies are used to clean produced water before discharge to meet permit limits for oil and grease.
Oilfield Produced water management
Produced water is water produced from oil and gas extraction operations. It originates from hydrocarbon-bearing formations and can also migrate from adjacent formations. Global produced water volumes are estimated at over 100 billion barrels per year. Produced water is chemically complex, saline, heterogeneous, and can contain toxic substances and process chemicals. Common management practices for produced water include reuse in enhanced oil recovery, surface disposal, underground injection, and beneficial use. More research is needed to improve treatment technologies and develop more sustainable management methods for the large volumes of produced water.
Produced water overview ppt, Oct 2011, M Rashid
This document discusses produced water handling and treatment technologies. Produced water is a byproduct of oil and gas production that contains dispersed oil, solids, production chemicals and heavy metals. It requires treatment before disposal or reuse. The document outlines various separation and treatment technologies used, including settling, flotation, filtration and advanced processes. It provides guidelines for selecting technologies based on water characteristics and disposal criteria. Future developments discussed include downhole separation and subsea treatment to reduce volumes brought to the surface.
Management Options and Policy Guidelines for Use of Poor Quality Ground water...
the amount and quality of irrigation water available in the arid and semi-arid regions of the world are the main limiting factors to the agricultural productivity. Saline-sodic irrigation water, coupled with low annual rainfall and high evapotranspiration in the arid and semi-arid regions, not only results in accumulation of soluble salts in soil solution but also exhibit external signs of salt toxicity in the plants. therefore research works are needed to find the best cultivation conditions for uses of p
Produced Water | Session VI - Ben Sebree
This document discusses how recycling produced water from oil and gas production can help address Texas' growing water supply challenges. It notes that Texas' population and water demand are projected to increase substantially by 2060 while supplies are expected to decline. Recycling two-thirds of the roughly 7 billion barrels of produced water generated annually could meet 3.3% of the state's current water demand and 26% of the projected shortage in 2020, providing an unexpected solution to the state's water crisis through beneficial reuse of this resource.
Produced Water | Session X - Steve Jester
Produced water reuse for hydraulic fracturing in the Eagle Ford presents several challenges. Blending produced water with fresh water can allow for some reuse, but compatibility issues may lead to premature crosslinking or scaling. Developing fracturing fluid packages specifically for more challenging water sources is needed. The feasibility of produced water reuse depends on an evaluation of compatibility, logistics, reliability, cost, and environmental factors, and has not proven to be a single industry-wide solution for reducing freshwater use.
Produced Water | Session IX - JP Nicot
This document summarizes Jean-Philippe Nicot's presentation on the source and fate of hydraulic fracturing water in Texas. It shows that hydraulic fracturing water use in Texas increased from 36,000 acre-feet in 2008 to 81,500 acre-feet in 2011, but still represents a small portion of total water use in the state. The source of fracturing water varies by region, with some areas relying more on groundwater or brackish water. Produced water rates decline over time but vary significantly between wells.
Walnut Shell Filters - Oil & Gas
This must the discovery of the decade. Walnut shells are used to purify water from any sort of Contamination and has been a blessing for the Oil & Gas Sector.
Produced Water | Session XII - David Muchow
The document discusses increasing investor and public support for hydraulic fracturing (fracking). It outlines various risks of fracking including environmental risks like water and air pollution, operational risks, regulatory and legal risks, and financial risks. The document argues that building trust with investors and the public is essential to enhancing support for fracking. Greater disclosure of fracking operations and facts could help address misinformation and build trust, but must be balanced with protecting company proprietary information. Industry standards and cooperation between industry and government are also important to managing risks and building confidence.
Produced Water | Session XI - Brent Halldorson
The document discusses 3 case studies of recycling and reusing oilfield water:
1) Devon Energy used a mobile recycling facility to recycle over 900 million gallons of flowback and produced water into distilled water for hydraulic fracturing in the Barnett Shale.
2) A customer used produced water as a source for freshwater creation using mobile natural oxidation facilities, reducing disposal volumes and extending the life of disposal wells. Produced water brine was reused for drilling.
3) A mobile clarifier was used to treat high-capacity Eagle Ford flowback and produced water, removing solids and contaminants to allow reuse in nearby fracturing.
Produced water treatment_presentation
The document presents a produced water treatment system with the main objective of removing oil from water. It includes produced water skim tanks to reduce oil content from 1000 ppm to 100 ppm, a skimmed oil vessel to collect removed oil, water injection tanks and pumps to inject treated water, and waste water ponds and equipment to handle excess produced water. Challenges mentioned include effective oil-water separation performance, operating within design limits, and preventing environmental pollution.
Produced Water | Session XI - Alleman
This document summarizes strategies and technology needs for produced water management in unconventional oil and gas resource plays. It notes that 1-3 million additional wellbores will be needed to fully develop US shale resources, requiring increased use of brackish water, treatment technologies, and centralized facilities. Produced water management options include disposal via injection wells, surface discharge, beneficial use, and reuse. Reuse is increasingly common where fresh water is limited and injection well capacity is restricted. Produced water quality and volume varies between plays. Treatment goals include reducing dissolved solids for discharge/reuse and reducing volume for disposal. As fresh water demands grow, more reuse of produced water and saline groundwater is expected, requiring technologies to make these strategies
Produced Water Treatment to Enhance Oil Recovery
This document discusses water treatment technologies for the oil and gas industry. It covers upstream, produced, and downstream water treatment. Upstream treatment includes produced water separation and reinjection. Downstream treatment involves process water treatment and wastewater treatment for refineries and petrochemical plants. The document provides an overview of various separation, filtration, and disinfection technologies used at each stage of water treatment in the petroleum industry.
Water pollution in petroleum industry
The principal sources of water pollution in the petroleum industry are produced water, drilling fluids and cuttings, process and drainage water, sewage, spills and leaks, and cooling water. Drilling fluids and cuttings can affect benthic organisms if discharged into oceans, while their high pH and salt levels pose risks to freshwater. Produced water is one of the largest waste streams and contains inorganic and organic compounds; its disposal requires evaluation and treatment. Proper treatment and disposal of drilling fluids, cuttings, and other wastes are needed to minimize environmental impacts.
Water Quality, Quantity, and Management: Lessons from the Marcellus Shale Reg...
Water Quality, Quantity, and Management: Lessons from the Marcellus Shale Reg...Cary Institute of Ecosystem Studies
Presentation by Radisav D. Vidic,
University of Pittsburgh, for a hydrofracking forum hosted by the Cary Institute of Ecosystem Studies in Millbrook, NY on May 5, 2012.Viewers also liked (18)
EN - Alternative use of water in the upstream and downstream oil&gas industry
EN - Alternative use of water in the upstream and downstream oil&gas industry
Management Options and Policy Guidelines for Use of Poor Quality Ground water...
Management Options and Policy Guidelines for Use of Poor Quality Ground water...
Water Quality, Quantity, and Management: Lessons from the Marcellus Shale Reg...
Water Quality, Quantity, and Management: Lessons from the Marcellus Shale Reg...
Similar to Presentation1 for kazakhstan oil & gas summit 2015
Internship Presentation
The document discusses environmental impact assessment and monitoring services provided by CPTL Envirotech Designers & Pollution Control. It summarizes the organizational profile, services including air, water, noise monitoring and environmental impact assessment. It then discusses a project undertaken for Vardhaman Adarsh Ispat Pvt Ltd, including components of Form 1 and prefeasibility report required as per GOI notification to apply for environmental clearance for the proposed expansion project.
Coastal Road Project
Developing Projects in an Environmental and Social Management Framework - A presentation by Dr. Prasad Modak
Green building.pptx
The document discusses the need for sustainable construction practices, known as green buildings, in Lagos, Nigeria. It outlines how traditional building practices negatively impact the environment through energy use, air and water pollution, and waste. Green buildings aim to reduce these environmental impacts through efficient energy and water use, renewable materials, and reducing waste. The first LEED-certified commercial building in Nigeria is highlighted as an example. The document argues that adopting green building standards and certification systems, updating building codes, training professionals, and integrating green practices into government policy can help promote sustainability in the construction sector in Lagos.
New cv muhammad
I am an Environmental Engineer having more than 10 years of experience in environmental consultancy, municipal government and teaching / research institutions focussing on water and wastewater engineering, environmental impact assessment, environmental monitoring and assessment, water and wastewater reclamation, reuse and treatment.
New cv muhammad
Civil and environmental engineer having more than 10 years experience in environmental consultancy, municipal government and teaching / research institutions
George Leahy Resume
George Leahy is the Vice President and leader of the NYC Metro Environment Business Unit. He has over 37 years of experience in environmental engineering, remediation, and water/wastewater projects. He manages over 340 professionals across 8 offices. Some of his representative projects include serving as project director for soil and groundwater remediation at International Specialty Products in NJ, and construction management of a $241 million landfill remediation and restoration project in Staten Island for NYCDEP. He has extensive experience in areas such as landfill closure design, dredging and sediment remediation, and leachate treatment system design.
Adam_Reed_Resume
Adam Reed has over 20 years of experience in environmental health and safety compliance. He is currently an EHS Compliance Specialist at Interstate Batteries, where he provides regulatory expertise and conducts assessments to ensure compliance. Previously he held EHS management roles at Fujitsu Network Communications and consulting roles conducting environmental site assessments and project management. He has a B.S. in Environmental and Hazardous Materials Management and is a Certified Hazardous Materials Manager.
Nirvana hills project-Case Study
This document contains a presentation on the Environmental and Social Impact Assessment of the Nirvana Hills Slum Rehabilitation Project in Pune, India. The presentation covers the project background, applicable regulatory framework, and impact assessments of land use, air quality, soil and water, and socioeconomic factors. The project involves rehabilitating 4,324 slum households through new housing construction and development of commercial and community spaces. Impact assessments were conducted for planning, construction, and operational phases, and monitoring data on air quality, meteorology and land use are presented.
ENVIRONMENTAL-IMPACT-ASSESSMENT (E I A )
This document summarizes an environmental impact assessment report for a proposed project. It outlines the key elements and steps in an EIA, including screening, scoping, impact identification, impact prediction, assessment and evaluation. It then describes the generalized EIA process and divides the EIA into initial environmental examination and full environmental impact assessment. The document provides details on the objectives, key activities, and components of an IEE report.
Eia for railway project
This document provides an overview of environmental impact assessments for railway projects in India. It discusses how EIAs evaluate the environmental, social, and economic impacts of proposed projects. For railway projects specifically, it identifies potential impacts such as noise and vibration pollution, air pollution from train emissions, soil pollution from heavy metals, and water pollution. It also discusses how railway construction can cause soil erosion and changes to hydrology. The document outlines the key components of an EIA report and the methodology for conducting EIAs in India. It emphasizes the importance of EIAs for ensuring environmentally sound development.
The-EIS-System-in-Phillipine.ppt
The document outlines the Philippine Environmental Impact Statement (EIS) system procedures and requirements. It discusses four project categories subject to the EIS system and identifies environmentally critical projects and areas. It also summarizes the process for obtaining an Environmental Compliance Certificate, including documentation required, timeframes for review, and approval authorities for different project types. Benefits of the EIS system include ensuring projects comply with sustainable development and encouraging cleaner technologies.
Environmental impact assessment
References: EIA Guidance Manual, MOEF,Govt. of India.,
Basic civil and environmental engineering- C.P.Kaushik,S.S. Bhavikatti,Anubha Kaushik.
Mallikarjun.S.D_original
This document contains the resume of Mallikarjun S.D, an Indian citizen who holds an M.Tech in Environmental Engineering. He has over 9 years of experience in areas like air quality monitoring, water treatment, waste water treatment, and environmental impact assessment. He is currently working as an Environment Engineer at Vasavadatta Cements Sedam, where his responsibilities include ensuring regulatory compliance and maintaining pollution control systems. Prior to this, he has worked as a faculty member and consulting engineer in Ethiopia, and as a project coordinator for a construction company in India. He has expertise in areas like stack monitoring, water technology, quality control systems, and concrete construction.
Case_Brandy Resume
Brandy N. Case is an experienced engineer with over 4 years of experience in project management, planning, safety, environmental compliance and client relations. She has a B.S. in Mining Engineering from the University of Kentucky. Her experience includes work as a Project Engineer, Field Technician, Associate Engineer and Intern. She has skills in areas such as scheduling, supervising personnel, hazard analysis, and preparing reports. She maintains several certifications and has participated in professional organizations.
EIA of offshore drilling and dredging
The document summarizes an environmental impact assessment for proposed offshore drilling in Block AS-3 in Myanmar. The project would involve drilling one exploration well over 150 km from the coast in water depths over 2,400m using a mobile offshore drilling unit. Potential impacts of the drilling include effects on sediment, water and air quality, fish and marine habitats. The objectives of the EIA are to review interactions between drilling and the environment, identify and evaluate impacts, recommend mitigation measures, and provide an environmental management plan. The EIA focuses on a 5 km area of influence and finds no sensitive habitats would be affected. Mitigation plans aim to minimize impacts on fisheries, navigation, and the marine environment through best practices, monitoring,
The permitting advantages and challenges of green infrastructure
The permitting advantages and challenges of green infrastructureSouthern New England American Planning Association
This document discusses the permitting process and construction of a green infrastructure project in Hingham and Rockland, Massachusetts. It describes the various local and state permits required, including orders of conditions from conservation commissions and special permits from planning boards. Both towns required design changes during permitting, such as increasing stormwater infiltration systems. Construction involved careful installation of porous asphalt, bioretention areas, and wetland replication. Post-construction maintenance includes inspections and vacuuming of porous pavement to ensure long-term stormwater management.Introduction to Engineering and Profession Ethics Lecture2-The Engineering Pr...
This chapter discusses preparing for an engineering career. It introduces the engineering profession and provides answers to common questions about engineering. Some key points covered include choosing an engineering discipline, traits of successful engineers, and what engineers do in different fields like civil, electrical, and mechanical engineering. The chapter emphasizes the importance of time management, daily preparation, attending class, getting help, and joining an engineering organization to succeed in an engineering program and career.
Integrate Early; Integrate Often
Presentation given at the 2014 BuildingChicago - Greening the Heartland conference by Judi Cooper, Shanna Olson, Carey Nagle, and Scott Bowman. Using the Iowa Utility Board / Office of Consumer Advocate as a case study, the group demonstrates the power of the integrated design process as a tool to reach extremely high performance (and extremely low energy use) in buildings.
REVIEW ON ENVIRONMENTAL IMPACT ASSESSMENT FOR CHENNAI METRO RAIL PHASE 2
This PPT consists of EIA format In India and approach and methodology adopted in chennai metro rail project
Similar to Presentation1 for kazakhstan oil & gas summit 2015 (20)
The permitting advantages and challenges of green infrastructure
The permitting advantages and challenges of green infrastructure
Introduction to Engineering and Profession Ethics Lecture2-The Engineering Pr...
Introduction to Engineering and Profession Ethics Lecture2-The Engineering Pr...
REVIEW ON ENVIRONMENTAL IMPACT ASSESSMENT FOR CHENNAI METRO RAIL PHASE 2
REVIEW ON ENVIRONMENTAL IMPACT ASSESSMENT FOR CHENNAI METRO RAIL PHASE 2
Recently uploaded
ASONAM2023_presection_slide_track-recommendation.pdf
Presented at the 2023 IEEE/ACM International Conference on
Advances in Social Networks Analysis and Mining.
Supercharge your AI - SSP Industry Breakout Session 2024-v2_1.pdf
During the May 2024 SSP Conference in Boston, MA, Margie Hlava gave this presentation during the Industry Breakout Session on May 29, 2024.
2024-05-30_meetup_devops_aix-marseille.pdf
Slides de notre meetup DevOps AixMarseille du 30 mai 2024 chez SmarTribune
Sujets: platform engineering / terragrunt / test containers
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Carrer goals.pptx and their importance in real life
Career goals serve as a roadmap for individuals, guiding them toward achieving long-term professional aspirations and personal fulfillment. Establishing clear career goals enables professionals to focus their efforts on developing specific skills, gaining relevant experience, and making strategic decisions that align with their desired career trajectory. By setting both short-term and long-term objectives, individuals can systematically track their progress, make necessary adjustments, and stay motivated. Short-term goals often include acquiring new qualifications, mastering particular competencies, or securing a specific role, while long-term goals might encompass reaching executive positions, becoming industry experts, or launching entrepreneurial ventures.
Moreover, having well-defined career goals fosters a sense of purpose and direction, enhancing job satisfaction and overall productivity. It encourages continuous learning and adaptation, as professionals remain attuned to industry trends and evolving job market demands. Career goals also facilitate better time management and resource allocation, as individuals prioritize tasks and opportunities that advance their professional growth. In addition, articulating career goals can aid in networking and mentorship, as it allows individuals to communicate their aspirations clearly to potential mentors, colleagues, and employers, thereby opening doors to valuable guidance and support. Ultimately, career goals are integral to personal and professional development, driving individuals toward sustained success and fulfillment in their chosen fields.
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
• For a full set of 760+ questions. Go to
https://skillcertpro.com/product/databricks-certified-data-engineer-associate-exam-questions/
• SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
• It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
• SkillCertPro updates exam questions every 2 weeks.
• You will get life time access and life time free updates
• SkillCertPro assures 100% pass guarantee in first attempt.
XP 2024 presentation: A New Look to Leadership
Presentation slides from XP2024 conference, Bolzano IT. The slides describe a new view to leadership and combines it with anthro-complexity (aka cynefin).
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...OECD Directorate for Financial and Enterprise Affairs
This presentation by Professor Alex Robson, Deputy Chair of Australia’s Productivity Commission, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Insight: In a landscape where traditional narrative structures are giving way to fragmented and non-linear forms of storytelling, there lies immense potential for creativity and exploration.
'Collapsing Narratives: Exploring Non-Linearity' is a micro report from Rosie Wells.
Rosie Wells is an Arts & Cultural Strategist uniquely positioned at the intersection of grassroots and mainstream storytelling.
Their work is focused on developing meaningful and lasting connections that can drive social change.
Please download this presentation to enjoy the hyperlinks!
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
This is a workshop about communication and collaboration. We will experience how we can analyze the reasons for resistance to change (exercise 1) and practice how to improve our conversation style and be more in control and effective in the way we communicate (exercise 2).
This session will use Dave Gray’s Empathy Mapping, Argyris’ Ladder of Inference and The Four Rs from Agile Conversations (Squirrel and Fredrick).
Abstract:
Let’s talk about powerful conversations! We all know how to lead a constructive conversation, right? Then why is it so difficult to have those conversations with people at work, especially those in powerful positions that show resistance to change?
Learning to control and direct conversations takes understanding and practice.
We can combine our innate empathy with our analytical skills to gain a deeper understanding of complex situations at work. Join this session to learn how to prepare for difficult conversations and how to improve our agile conversations in order to be more influential without power. We will use Dave Gray’s Empathy Mapping, Argyris’ Ladder of Inference and The Four Rs from Agile Conversations (Squirrel and Fredrick).
In the session you will experience how preparing and reflecting on your conversation can help you be more influential at work. You will learn how to communicate more effectively with the people needed to achieve positive change. You will leave with a self-revised version of a difficult conversation and a practical model to use when you get back to work.
Come learn more on how to become a real influencer!
Tom tresser burning issue.pptx My Burning issue
Addressing the status of black home ownership in America. and what actions are taken to impact these trends.
Presentatie 8. Joost van der Linde & Daniel Anderton - Eliq 28 mei 2024
Dutch Power Event
“AI – Navigeren naar de toekomst?”
Op 28 mei 2024 bij Info Support.
Media as a Mind Controlling Strategy In Old and Modern Era
This presentation, created by Syed Faiz ul Hassan, explores the profound influence of media on public perception and behavior. It delves into the evolution of media from oral traditions to modern digital and social media platforms. Key topics include the role of media in information propagation, socialization, crisis awareness, globalization, and education. The presentation also examines media influence through agenda setting, propaganda, and manipulative techniques used by advertisers and marketers. Furthermore, it highlights the impact of surveillance enabled by media technologies on personal behavior and preferences. Through this comprehensive overview, the presentation aims to shed light on how media shapes collective consciousness and public opinion.
Presentatie 4. Jochen Cremer - TU Delft 28 mei 2024
Dutch Power Event
“AI – Navigeren naar de toekomst?”
Op 28 mei 2024 bij Info Support.
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...OECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.
Updated diagnosis. Cause and treatment of hypothyroidism
Types, classification, causes, diagnosis and treatment of hypothyroidism
Recently uploaded (19)
ASONAM2023_presection_slide_track-recommendation.pdf
ASONAM2023_presection_slide_track-recommendation.pdf
Supercharge your AI - SSP Industry Breakout Session 2024-v2_1.pdf
Supercharge your AI - SSP Industry Breakout Session 2024-v2_1.pdf
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Carrer goals.pptx and their importance in real life
Carrer goals.pptx and their importance in real life
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
Presentatie 8. Joost van der Linde & Daniel Anderton - Eliq 28 mei 2024
Presentatie 8. Joost van der Linde & Daniel Anderton - Eliq 28 mei 2024
Media as a Mind Controlling Strategy In Old and Modern Era
Media as a Mind Controlling Strategy In Old and Modern Era
Presentatie 4. Jochen Cremer - TU Delft 28 mei 2024
Presentatie 4. Jochen Cremer - TU Delft 28 mei 2024
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Updated diagnosis. Cause and treatment of hypothyroidism
Updated diagnosis. Cause and treatment of hypothyroidism
Presentation1 for kazakhstan oil & gas summit 2015
- 1. By Baig Ali (Alumni of AKF) -Chief Engineer of Civil Projects -BE. Civil Engineering Pakistan. -M.Sc. Energy Systems & the Environment UK
- 5. Overview: Introduction. Background. Purpose & Scope.
- 6. Exploration Surveying. Pre & Post Drilling Works. Drilling & Operations Works. Production & Process Works. Production & Process Development Works. Decommissioning & Rehabilitation
- 9. Environmental Protection Measures Implementations at Site. Operational Considerations. Pollution Prevention and Cleaner Production. Water Treatment & Disposal Techniques. Oil Spill Contingency Planning. Decommissioning & Rehabilitation.
- 10. • Human, Social-Economic & Cultural Impacts. • Atmospheric Impacts. • Aquatic Impacts. • Terrestrial Impacts. • Echo systems Impacts. • Potential Emergencies • Environmental Impacts in the Context of Protection Policies and Requirements
- 20. Environmental Sensitive Areas. Technology Considerations. Atmospheric Emissions. Produced Water. Solid Wastes. Techniques.
- 21. Regulatory Frame Work, Institutional Factors and Infra Structures. International & Regional Frameworks. National Frame Works
- 22. • Management Systems. • Leadership and Commitment. • Policy & Strategic Objectives. • Organization, Resources and Documentation. • Evaluation and Risk Management. • Planning. • Implementation and Monitoring. • Audit & Review.
- 23. What is the effects of climate Change on HDP & LDP Effects of WBM? Effects of OBM? How the Property of LDP & HDP Changes? Assessments and Suggestion for 03 R’s How to depose off it Environmental Friendly?
- 24. 06 U, to Reduce of the Fossil Fuel Impacts. Understanding of the Community. Understanding of the Stack holders. Understanding of the Regulatory Bodies. Understanding of the operators. Understanding of the Technology & Techniques devisers. Understanding of the Implementers.