The document discusses a smart city project in Karnal, India. It highlights key details about Karnal such as its area, industries and educational institutions located there. It then discusses the smart city amenities that will be implemented as part of the project, including smart street lights, WiFi networks, solar power integration, parking management systems and more. It also discusses best practices for electrical safety that will be followed, including maintenance-free earthing, surge protection and use of copper-clad conductors. Finally, it discusses some of the company's expertise and clientele in providing electrical safety solutions.

1. SMART CITY PROJECT KARNAL INDIA
WELCOME FOR THE PRESENTATION ON
Best Practice
ELECTRICAL Equipments Instalation And
SAFETY PRODUCTS
(Electrical Controls Communication Networking
Monitoring)

2. • Highlight of Karnal City(Battel Field/Cattel
Field/Farmer Field)
• Chief Minister Constituency(Sh.Manohar Lal)
• Date of Birth 17thMarch 2010(Karnal)
• Area 85 SqKM(15Villages,20Wards)
• NDRI/CSSRI/DWR/NBAGR/HPA
• Education/Hospitals/Industries/Infra/Dairies
• Metro Rail /Heliport(May be in Futhure)

3. SMART CITY Project India by
JMV LPS LTD

5. Smart City Ammenities

6. Smart Street Light with LED

7. • India Plan To have Air Connectivity with all Major Cities
• SMART , Efficient and DIGITAL
• Building and Infra Facilities
• Networking and Communication (Wi-Fi)
• Power Grid + DG+Solar+Wind+UPS
• Parking Management Systems
• Smart Police and Traffic Management
• Fuel Storage and Filling Systems
• Water Storage and Distribution Management
• Smart Initiates (Street Light/SolarPower /DrinkingWater/
CleanEnvironment/Smart way for Desposals)

8. Best Practice of Electrical Saftey
Maintenance Free Earthing(1.00Ohm and 0.50Ohm) for Equipments and
8.00Ohm for Iightning.
Less Joints /Less Corners(All Joint should have 100% Surface
Contact(Practice Exothermic).
Use of Copper Clad Steel/Alumenium Clad Copper Conductor in Place of GI
and Copper Flat Strip for Ground Connection.
External Lightning Protection(Cloud Charges)
IEC 62305 Angle Protection/NFC17-102 Raduis Protection.
Internal Surge Protection from Power and Communication Ports.

9. Corporate Presentation Merging with Technologies Sept 2016
Airports and Infra structure

10. • NOW Central Electrical Authority and BIS
Change Electrical Instalation
Standard/Buildings and Industries
Date28August 2015(Copy Can be Offer)
• Incorporation of Maintinance Free Earthing +
Exothermic Welding
• Incorporation of ESE Type Lighting Arrestors
• Incorporation of Surge Protection for
Power,Control &Monitoring

11. Integrated Power Development
Scheme (IPDS/DDUGJY)
• An integratedschemeforurbanareascovering:
• •Smart Metering and Tamper-proof meters at homes
• •Infrastructure upgradation in urban areas -
Comprehensive sub transmission & distribution
• •Underground cabling & GIS Sub stations in densely
populated areas
• •IT implementation for better customer service
• •Solar installations like rooftop solar panels also
covered
• •Outlay of Rs. 65,424 crores

13. NDMC Delhi SPEC For Earthing-1

14. NDMC Delhi SPEC For Earthing-2

15. NDMC Delhi SPEC For Earthing-3

16. JMV Expertese Area

20. Surge in Systems and Result

21. External/Internal Surge Source

23. STREET LIGHT EARTHING
(CREDA)

24. Copper Cladded Conductor For Electrical
Installation
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper. These
conductors/ wires
or strands are equipped with the strength of steel with the conductivity and copper with the better corrosion
resistance property. The concentric copper cladding is metallurgic ally bonded to a steel core through a continuous,
solid cladding process using pressure rolling for primary bonding. The copper cladding
thickness remains constant surrounding steel. We use different steel grades for the steel core result in Dead Soft
Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in Annealed
and Hard drawn. We are delivering products with varied conductivity and tensile strength as per the customer need.
Further, the wire can be processed to be silver plated or tinned copper clad steel wire.

25. www.jmv.co.in
Advantages of JMV’s Exothermic Welding System over other
Jointing Methods
Air Gaps

26. Most Efficient JointProcess
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.

27. What is Exothermic Welding System?
Copper to Bi-Metal and Alumenium
Types of Exothermic Joints:
Possible to join any bi metal except aluminum
Exothermic welding is a process of making maintain free highly molecular bonding process is superior in
performance connection to any known mechanical or compression-type surface-to-surface contact connector.
Exothermic weld connections provide current carrying (fusing) capacity equal to that of the conductor and will
not deteriorate with age.
 It offers Electrical connections between two or more copper to copper and copper to steel conductors.
 Highly portable method as it does not require any external power source or heat source, so it can be done
almost anywhere.
 It provides strong permanent molecular bond among metallic conductors that cannot loosen and further will
not deteriorate with age.

29. The 100% of lightning energy breaks down as
follows:
a) 50% of the lightning current will flow through
the ground
b) 50% of the lightning current will flow over the
connected metal parts out of the building:
• about 10% to the water pipe (metal)
• about 10% to the gas pipe (metal)
• about 10% to the oil pipe (metal tank)
• about 10% to the sewage pipe
• a out % to the power supplier’s i o i g feed
• max. 5% or 5 kA shared across all data lines
50 %
50 %
Equipotential bonding for lightning protection according IEC 61024-
1 and IEC 61312-1; IEC62305
In India & Sri Lanka Only Chance is Power Line
Approximately 50 % of Total Lightning Current has
to be diverted to Power lines

30. LIGHTNING FORMATION

31. Facts about Lightning
• A strike can average 100 million volts of electricity
• Current of up to 200,000 amperes
• Can generate 54,000 oF
• 10/350MicroSec/50KA Fault Current/Discharge in
Nano Sec
Protection
Earthing Design100KA Fault Current/Joints Exothermic
/Flexible Down Conductor with Shortest Route &
Less Corner

32. • Lightning Protection Standard use in India
(IS2309 Now IEC 62305-5)
Working Principle Angullar No Compromise with
Design Max Protection 30Mtrs from One
No Product warrenty from Manufacturer
NFC17-102(2011)
Working Principle Radius Compromise with Design
Possible with Increasing Qty of ESE
Max Protection 109 Mtrs Radius from One
Manufacturing Warrenty and Test Certificate for
Products Available

34. PASSIVE PROTECTION SYSTEM
Angular Protection
45 deg. / 60 deg. / 72 deg. Based on the Level of Protection

36. EARLY STREAMER EMISSION
t = TFR – TESE
E.S.E. LIGHTNING RODS
ACTIVE PROTECTION SYSTEMS
Radius Protection

37. junction point
Upward leader
Downward leader
LIGHTNING FORMATION

41. Installation
ESE AT with radius protection form 32 mtr to 107 mtr.
DMC Insulator .
GI/FRP Mast .
Down Conductor Copper / Copper Cadmium
Cable 70 sq. mm
Copper Bonded Ground Earthing

43. Gel Based Cable Jointing Kit
JMV introduces Cable Jointer-Silicone Gel Based
Cable Jointing Kit for making safe and reliable electrical
joints.
JMV’s Ca le Joi ti g Kit with two-component
insulation for extruded cables joint with self-sealing polymer
insulation, which provides safe electrical connections
between two nodes or electric circuit and prevents hazards.

44. Step – 1
Step – 2
Step – 3
Joint all phase wire/ cable with the help of
crimping tools and lugs
Fixed the separation sheet between all wires/
cables
Close the filled Silicon enclosure from top and
bottom , complete installation is done.
Thimble
Separation Sheet
Gel / Silicon

45. Features :
Provides cable with cable connections and jointing wires in switchboard / electric boxes Being a jelly it can be
easily fit into molds of any shape and size.
Helps in safeguarding electrical connections and also protects electrical connection joints from catching fire, sparking
and leakage current.
Eradicates all the possibilities of fire, electric shocks and sparks, etc. causes due to improper electrical connection
joints and safeguards structure, equipment and person.
Offers safety to your electrical joints from ageing, corrosion, moisture and also observes leakage current.
Advantages :
Nontoxic
Insulating
Highly reliable operation
Maintenance Free
Repairable
Cost Effective
High repeat value
Elasticity
Shape retention

46. • Many Industries now using Follwing Products and Created Standard Instruction Ducuments.
• Indian Railway RDSO Specification (S&T) Draft New 2016 (MaintenanceFree Earthing &Surge
Protection)
• Indian Railway Direct Tender for ESE Type LA (Class A Type Lightning Arrestors)
• Power Grid for Transmission Tower Instalation (Maintenance Free Earthing & Exothermic Joints)
• Power Grid for Transmission UG Cable Instalation (Maintenance Free Earthing & Exothermic Joints)
• Airport Authority of India (CNS) Maintinance Free Earthing,ESE Type LA and Surge Protection
• IOCL Pipe Line for (Maintenance Free Earthing & Exothermic Joints)
• Haryana Govt for Power T&D (Maintenance Free Earthing & Exothermic Joints)
• Gujarat Govt for Power T&D (Maintenance Free Earthing & Exothermic Joints)
• Andhra Pradesh(Infrastructure Developments) for Maintenance Free Earthing
• Andhra Pradesh Govt for Power T&D (Maintenance Free Earthing & Exothermic Joints)
• MNRE /SECI for Solar PV Project Maintinance Free Earthing,ESE Type LA and Surge Protection
• NTPC for Solar PV Maintinance Free Earthing,ESE Type LA and Surge Protection and Copper Clad
Steel Conductor
• West Bengal State for Maintinance Free Earthing and ESE Type LA

47. JMV’s Clients

49. Neeraj Saini – 9910398538
Rahul Verma – 9910398535
Manav Chandra - 9910398999