Department of Space ,Electrical Contractors, Equipment Manufacturing, Launching Systems,Controls,Monitoring and Electrical Systems, Design and development DRDO

1. Welcome to Mars Monitoring World

2. India Man in Light

3. Presentation on Best Practice for
Electrical Equipment Installation and Safety
of Product(Earthing & Protection)
We commited to see India on
TOP and best Facilties around
The World

4. Smart India and Space Programme

5. Smart India Mission using Satellite
• To Protection our Nation using Satellite for Monitoring of
Borders (Sea,Ground and Air)
• To Collect Data for Weather Monitoring for efficient use
• To Collect Data for Early Warning (DisasterManagement)
• Use of Satellite for Communication (Transmission & Reciving of
Data and Images
• Use of Satellite for Broadcasting Radio/Television
• Use of Satellite for Global Positing and information Systems
• Connecting Physical devices to Control and Monitoring
• Use of Satellite for Storage and Data Management
• Use of Realtime Data and Event for Survilliance and Video
Monitoring.
• Use of Satellite for Transportation of Public and Goods through
Surface,Sea and Air
• Many More Important use of Satellite in our life.

6. 6
Deep Sea P Sensor

7. |7
Suggested real-time sea level stations
(India)

8. |8
Surface Currents (India)

9. Lightning
Safety of the structure / human/ equipments

10. Hamen Babaji Nahi Science Chahiye

11. India Life can be Save from Lightning

12. We all may be danger if not Protected

13. Horrifying Losses Due To Devil Lightning

14. Early Warning System/Alert

15. Protection from Lightning Charges

16. Hame Jina hey Hame Jine Doo

23. Standards Worldwide for Lightning NFC17-102 and IEC62305-3

24. Make in India India
Space Programme(Smart and Economical

25. Topics of Presentation
• Latest National Building Code 2016
• Maintenance Free Earthing Arrangement as per UL 467, IEC 62561-2
• Earth Enhancing Compound as per IEC 62561-7
• Exothermic Weld(Fail Proof Joints) as per IEEE 837
• Copper Clad Steel Replacement of GI Flat Strips as per IEEE & IEC
• Surge Protection for Power and Communication Port (Suitable Integration is
also available)
• Lightning Protection IS/IEC 62305 Part 1-4
• NFC 17-102/UNE 211186 is in Process Incorporation in National Electric
Code Under Final Revision

26. Our Solutions for Best Practice
(Earthing & Protection)
Electrical Power Generation ,Transmission &
Distribution
Backup Power(DG and UPS now Solar PV Power)
Communication Equipment (Fixed or Wireless)
Security Surveillance (CCTV/Access
Controls/Networking)
Building and Infra Solutions
Launching Vechiles
Control & Montoring

27. Surge Protection use Recommendation

28. We always think about Safety of Each Life

29. Everybody Monitor for Human Safety

30. We are offering
Surge Protection Devices as IS/IEC 62305-4

31. Sikhana to Padega Hi Follow NBC2016

32. Best Earthing Practice to perform equipment well &
protects from shock (As per Latest NBC-2016)
1. Equipment Earthing
 CI/GI/ Copper Plate earthing with maintenance
material
 Copper/ Copper Bonded Steel Rod with
maintenance free earthing system
2. GRID Earthing

33. Copper Bonded Steel Rod- Best Earthing Material /
Superior in Quality / Recommended by IEEE 80, UL 467,
IEC 62561-2, IS 3043
• Low carbon solid steel rod with minimum 250 micron pure
copper coating as per UL 467
• Offers 4 to 5 times more working life than GI electrode
• Excellent fault current carrying capacity
• Exhibits same corrosion resistant property as copper
• High strength of steel
• A cost effective solution
• Theft proof solution

34. Complete Earthing Arrangement
The use of Earth Enhancing Compound
complying to …IEC - ……..pla s a i porta t i
making grounding system much more effective.
- It retain moisture thus provide smooth path for current to flow
faster.
- Si e it has oisture rete tio properties it does ’t de a d
regular watering that makes the grounding system low
maintenance.
- The continuous presence of moisture provides stable Ohmic
value.
- It does ’t ot ashes a a ith ti e.
- It does not demand continuous presence of water to maintain
its conductivity.

35. Fire Accident due to electrical joint failure in
Lightning Protection & Earthing

36. An Arcing Fault is the flow of
current through the air between
phase conductors or phase
conductors and neutral or ground.
Concentrated radiant energy is
released at the point of arcing an a
small amount of time resulting in
Extremely High Temperature.

37. Earthing Connections & Joint Practices
For making earthing connections &
electrical jointing, mechanical joints are
still prevails.
Nut & Bolt, welding, clamping,
brazing
Contact areas of connections have voids
and gaps which cause corrosion, rust
and oxide results in early deterioration
Resistance of mechanical connections
increases with time and this alters the
conductive properties of connections
Only give 8-20% contact surface area
Gets corroded over the period of time
due to atmospheric corrosion

38. Main earthing wire connections shall be:
• Be mechanically & electrically sound;
• Be protected against damage, corrosion and vibration;
• 100% contact surface area is must;
• Be secured at the earth electrode;
EXOTHERMIC WELDING- For all buried & permanent
connections as per IEEE 837 / NBC 2017

39. EXOTHERMIC WELDING-
Permanent Jointing solution
These cavity can be designed on
customize basis as per the type of joint
is required.
Also the dimension of the conductors
which needs to be joint in a kind of
jointing.
We are the manufacturer and can offer
any kind of joint type as mentioned
below:

40. Most Efficient Joint Process
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.

41. Copper Clad Steel Solid ROD and Conductor

44. Surge in Systems and Result

45. Surge in DC Application

46. External/Internal Surge Source

48. LIGHTNING FORMATION

49. Safety Main It Should be Remain
(Protect your Equipment for Internal & External Surges)
The 100% of lightning energy breaks down as follows:
a) 50% of the lightning current will flow through
the ground
b) 50% of the lightning current will flow over the
connected metal parts out of the building:
• about 10% to the water pipe (metal)
• about 10% to the gas pipe (metal)
• about 10% to the oil pipe (metal tank)
• about 10% to the sewage pipe
• a out % to the power supplier’s i o i g feed
• max. 5% or 5 kA shared across all data lines

50. Facts about Lightning
• A strike can average 100 million volts of electricity
• Current of up to 200,000 amperes
• Can generate 54,000 oF
• 10/350MicroSec/50KA Fault Current/Discharge in
Nano Sec
Protection
Earthing Design100KA Fault Current/Joints Exothermic
/Flexible Down Conductor with Shortest Route &
Less Corner

51. • Lightning Protection Standard use in India
(IS2309 Now IEC 62305-5)NBC2016
Working Principle Angular No Compromise with Design
Max Protection 30Mtrs from One
No Product warranty from Manufacturer
High Maintenance Require
Earthing below 10.00 Ohm

52. Lightning Risk Assessment Study is actually the
measure of risk of a lightning strike and probability of
damages. As Per IEC62305-2.
All these calculations are based on:
Lightning strike density in that particular area(provided byOMV i.e.Ng = 8),
Danger for people,
Occupation coefficient of structure,
Relative location of site,
Fire Risk,
Associated services,
Electrical Lines,
Lightning Protection Level,
Surge Arrestor and
Dimensions of installation.

53. Lightning Risk Calculation as per IEC62305-2

54. Ligthing Risk Calculation

55. Lightning Risk Calculation

56. Lightning Risk Calculation

57. Risk Assessment Calculator as per IS/IEC 62305

58. Air- Termination System
1. Vertical Rods- simple
shaped buildings
2. Catenary wires-
suitable for all cases
3. Meshed/ Grid
Conductors- best for
where plane/ pitch
roof surfaces

59. Air- Termination System Design

60. Protection Angle method

61. Mesh/ Faraday Cage Method

62. Rolling Sphere Method

63. Lightning Protection As Per NF C 17 102/UNE 211186
The ESE air terminal is a terminal which enables to generate artificially an upward leader earlier than a simple rod, with an
ionization system, in order to establish a special impact on its point. The capture of the lightning strike being faster than a
simple rod, this technology enables to benefit from larger protection areas, ensuring protection for large dimensions structures.
The generated protection radius depends on the early streamer emission value of the air terminal (Δt in µs), its height, and the
efficiency of the protection. The protection radius ensured by this type of air terminal is 120 m (Protection level IV, height = 60
m , early streamer emission time 60µs).
The NFC 17-102/UNE 211186 standard describes the installation procedure for this type of air terminal.
The installation of this type of air terminal is easy and cheaper than other technologies.
It can protect whole buildings with one E.S.E. air terminal. It enables the protection of a structure and its environment, the
protection of opened areas and well integrate in the architecture of a structure without aesthetic alteration.
1 ESE, 2 down conductors and 2 earthing systems are necessary to ensure the protection.

64. Early Streamer Emission Air Terminal

65. •An active and advance technology device based on the principle of
Corona effect.
•Internationally accepted technology complying standard NFC 17-102.
•Active Protection not only protects the structure also protect
surroundings & open areas.
•Made up of stainless steel SS-316L hence highly corrosion resistant
and long lasting.
•More life due to corrosion resistant material is used.
•Single installation offering maximum radius of protection of 109
meters which is very large in comparison to conventional lightning
system.
•ESE air terminal is very quick in response.
•Excellent, no electronic device.
•Economical solution.
•Easy to Install.

67. IEC Declaration by CENELEC for
NFC17-102

68. BT has confirmed that ESE National Standards would remain valid and thus BT recognized
there ould e o e ide e of o fli t et ee NF C ‐ a d IEC EN ‐ sta dards a d
consequently there is no reason, technical or otherwise, for the withdrawal of the respective
national standard.BT has requested that this standard be modified in order to cancel all
refere e to the IEC EN ‐ series, allowing the NF C ‐ sta dard to e ist, ith the
proposal of possible future migration to international level (lEC). Accordingly, it was established
that European ESE standards (France, Spain, Portugal, Slovaquia, etc.) will not
conflict with other European standards and will remain valid.
• GIMELEC would draw your attention to the fact that
the ter s of refere e of NF C ‐ a d
• other standards, addressing alternative terminals (NF
C ‐ , PR EN ‐ ‐ ) ere fro the
• outset, er differe t. It is a fa t that NF C ‐ ,
whilst referring to ESE Technology also
• comments on other standards for lightning protection
systems, particularly incorporating
• faraday cage, franklin rod and catenary wire systems.
the 'camouflaging' of NF C ‐102 by IEC EN
• ‐ and its proponents, that FRENCH STANDARD
NF C ‐ is still in full force.

69. ESE Installation Guidance
ESE AT with radius protection form 32 mtr to 107 mtr.
DMC Insulator .
GI/FRP Mast .
Down Conductor Copper / Copper Cadmium
Cable 70 sq. mm
Copper Bonded Ground Earthing

70. Safety Main It Should be Remain
(Protect your Equipment for Internal & External Surges)
The 100% of lightning energy breaks down as follows:
a) 50% of the lightning current will flow through
the ground
b) 50% of the lightning current will flow over the
connected metal parts out of the building:
• about 10% to the water pipe (metal)
• about 10% to the gas pipe (metal)
• about 10% to the oil pipe (metal tank)
• about 10% to the sewage pipe
• a out % to the power supplier’s i o i g feed
• max. 5% or 5 kA shared across all data lines

71. Step – 1
Step – 2
Step – 3
Joint all phase wire/ cable with the help of
crimping tools and lugs
Fixed the separation sheet between all wires/
cables
Close the filled Silicon enclosure from top and
bottom , complete installation is done.
Thimble
Separation Sheet
Gel / Silicon
Gel Based Cable Jointing Kit

72. JMV Products for Earthing & Protection

73. Contact Professionals for Advise

74. We Protect You
Use Well Engineered Electrical Safety
Solutions With Us

75. Contact Our Team JMV INDIA
Leader and Inspiration behind Mr. Neeraj Saini neeraj@jmv.co.in
Mr. Mahesh Chandra Manav Brand JMV HOD manav@jmv.co.in
www.jmv.co.in
Mobile -919910398999 Landline -01204590000

76. JMV’s Clients