The document summarizes Balram's industrial training at Emperium Realty from July 9 to August 7, 2019. It provides details about Emperium Realty, the residential construction project, and the various activities Balram was trained in, including casting of columns and slabs, formwork, reinforcement, blockwork, safety measures, and tests. It also discusses the roles of clients, contractors, and consultants in construction projects and provides an overview of RERA regulations.

1. PRESENTATION ON INDUSTRIAL
TRAINING
AT
EMPERIUM REALTY
FROM 9 JULY – 7 AUGUST. 2019
Submitted By :-
BALRAM
17001009904
CIVIL ENGG. (4th Yr.)
1

2. INTRODUCTION TO COMPANY
 In August 2016, the company Emperium
Realty Pvt Ltd was incorporated. With a
team of highly professional staff, today
Emperium Reality Pvt Ltd has a net worth of
over Rs. 150 crores. The company have
established a strong market presence in the
real estate sector.
 Founding Directors – Mr. Ravi Saund & Mr.
Hardeep Singh
 General Managers – Mr. Sumit Agarwal &
Mr. Rohit Malik
 Website - www.emperiumrealty.com
 Contact - +91-7878-784747
2

3. INTRODUCTION TO PROJECT
 The project is to construct high rise residential buildings.
 The project is managed by the Project Manager Mr.
Anurag Bargoti.
 Construction includes 7 different towers and a water tank
also.
 Contractors – Eminent Colonizers Pvt. Ltd. (Tower
no. 3,4 & 5) & VD Concrette Flooring Pvt. Ltd. (Tower
no. 7)
3

4. INTRODUCTION TO SITE
 Address of the project Site - Virat Nagar, Byepass
Road Sector 1 A, Panipat, Haryana.
 Area of the Project – 5 Acres.
 Structures – 7 Towers and 1 underground water tank.
 Date of completion of the project – September 2022
4

5. SITE LOCATION
5

6. ACTIVITIES I HAVE BEEN TRAINED
 Casting of the column & Slab
 Checking of reinforcement in the columns, beams and
slabs.
 Checking of formwork
 Blockwork
 Some brief about Bar Bending Schedule (BBS)
 Safety
 Some Tests
 Relationship b/w Client, Contractor & Consultants.
 Brief introduction about RERA
6

7. STARTER OF THE COLUMN
 Starter is used to make
all the column in
straight line as given in
grid column layout.
 Any lack of attention in
this process causes
change in dimension of
the room size also
cause the vertical
alignment problem in
columns.
7

8. SHUTTERING & FORMWORK
 A temporary mould in which
concrete is poured.
 Materials used – Timber, Steel,
Aluminium and plywood.
8

9. REINFORCEMENT
 Reinforcement use is CTD or TMT bars.
 Yield strength is greater than 500N/mm².
 Minimum elongation 14.5%.
 Size of Bars available – 6mm, 8mm, 10mm, 12mm,
16mm, 20mm, 25mm, 32mm.
 Standard length – 12m.
9

10. REINFORCEMENT IN COLUMN
 Max R/f – 6%
 Min r/f – 0.8%
 Diameter of longitudinal bars
decreases as height of the
column increases.
 Tie bars of 8mm used.
 Spacing of tie bars
Confinement zone – 100mm
Non Confinement Zone – 150mm.
 Development Length
For M35 – 40db
For M30 – 46db
10

11. REINFORCEMENT IN BEAMS & SLABS
 8mm bars are used as
stirrups.
 Spacing is as per drawing.
 There are fixed and
cantilever beams.
 Crank in reinforcement is
also provided where
change in level.
 8mm bars are used in
slabs.
11

12. REINFORCEMENT IN STAIRCASE
12

13. CONCRETE
 Grades used –
M25 for Beam &Slab
M30 for Column after 8th floor
M35 upto 8th floor
 Machine used
1. Mixer Machine
2. Monkey Lift
3. Vibrator
4. Transit Mixer
5. Pumping Machine , etc. 13

14. DESIGN MIX
14

15. EQUIPMENTS
Pumping Machine Transit Mixure
15

16. 16
Pumping of Concrete
Finishing

17. BAR BENDING SCHEDULE
 BBS is comprehensive list that describe the location,
mark, type, size, length , number and bending details of
each bar in a r/f drawing of a structure.
17

18. CHECKING OF REINFORCEMENT
 Check for numbers of the bars.
 Their diameters should be check.
 Check for stirrups and their shapes as per drawing.
 Check the spacing.
 Check that rings are properly tied.
 Check for overlapping.
18

19. DRAWINGS
19

20. BLOCKWORK
 AAC Blocks (Autoclaved Aerated Concrete blocks) have
been used for construction of walls.
 Sizes –
1. 625X200X250 mm
2. 625X100X250 mm
3. 625X200X200 mm
4. 625X100X200 mm
 Strength – 4.5N/mm²
 They were bought from “Indo-Bhutan construction
Solution Pvt. Ltd.”.
20

21. BLOCKWORK
21

22. TESTS PERFORMED
 Silt Test –
 Performed to check the quality
of coarse sand.
 It is denoted as percentage.
 Silt content shouldn’t be more
than 8%.
22

23. TESTS PERFORMED
 Slump Test –
 This test is performed
to check workabilty.
 Its value varies from
25-140mm.
 Sample fails if its value
exceeds 140mm.
23

24. SAFETY MEASURES
 All workers must know the safety measures.
 Site should be restricted for trespassers.
 Safe work method assessment.
 Use clear signage throughout the site.
 There should be availability of first aid.
 All the workers should wear safety gears i.e. halmet,
safety belt, boots, necessary pads, etc.
24

25. CLIENT, CONTRACTOR AND CONSULTANTS
 Client-
The client refers to the entity that has the need that defines the project
objectives, schedule, and dedicated budget. The client is in-charge
of the basic idea of the project.
 Consultants –
The consultants role is to evaluate a client’s needs and provide expert
advice and opinion on what needs to be done. It provide
professional advice regarding information in its field of knowledge.
 Contractors –
Contractor is hired by client to carry out work, under the terms and
subject to the deadlines, and the quality and cost provisions. If the
contractor doesn’t have the necessary resources, it may use one or
more external companies, known as Sub-Contractors
25

26. Flow Chart
26

27. RERA
 RERA stands for Real Estate Regulatory Authority. It is an act for
regulations and promotion of the real estate sector to ensure the sale
of apartment, plot or building in an efficient and transparent manner.
 Enacted by parliament in 2016 and came into force in 1 may 2017
across India.
 Key provisions-
 Buyer will pay only for carpet area.
 Any defect in the building will be responsibility of the builder for the
period of 5 years.
 Developers have to disclose the project detail on the website and
should regularly update the construction progress.
 Project with plot size of minimum 500mm² or 8 apartments need to
be registered with RERA.
 The project of Imperium Realty is RERA Certified.
27

28. CERTIFICATION
28

29. 29