1. DILIPKUMAR B.C
#4, 3rd
Main road, Kanaka : 09535187417
Layout, Padhmanabha nagar, : dilipkumar.bc@gmail.com
Bangalore- 560070, Karnataka, India.
OBJECTIVE
“To seek challenging career in cutting edge technology and to work in a professional and competent
atmosphere that enable me to develop technical abilities and which increases my ability to
contribute to an organization”
SUMMARY
 Experience in design of jig & Fixture for Special Purpose Machines and Automations like
Gantry system, pick & place, chute, conveyors and NPD (NEW PRODUCT
DEVELOPMENT)
 Hand calculation like gear motor, gear box and hydraulic & pneumatic actuators selections,
Standard part selections and Interaction with the suppliers.
 Knowledge of machining, casting, material selection, manufacturing process, Plastics, sheet
metal, GD & T, DFM, DFMEA, tolerance stack up and assembly process
 Ability to apply ASME standards for GD&T on drawings for parts, assembly, validate
dimensions and fit check analysis
 Principles involved in production technical plans, blueprints, drawings and models.
 Inspection visits at the fabrication site for checking the efficiency of the product at part and
assembly stage
 Good communication, team managerial and interpersonal skills.
CAD TOOL SKILLS
 Expertise skills in CAD tools like AutoCAD, Solidworks, UG NX 7.5 and Autodesk
Inventor.
 Interested to learn any new tools and techniques with quick learning ability.
 Ability to create parametric CAD 3D data for Part, Assembly, 2D drawings and engineering
documents per defined standards.
 Comprehensive knowledge in Data management and Solid works EPDM and Enovia.
 Good knowledge in SAP, Windows and MS office.
EDUCATION SUMMARY
 B.E in Mechanical passed from K.S Institute of Technology, Bangalore.
Affiliated to Visveswaraiah Technological University
 PUC (PCMB) passed from RURAL P U College, Kanakapura, Ramanagara
Affiliated to Pre-University Education, Karnataka.
 SSLC Passed from RURAL M P HIGH SCHOOL, Kanakapure, Ramanagara

2. Affiliated to Karnataka Secondary Education Board.
PROFESSIONAL EXPERIENCE
TRISHUL ENGINEER (Bangalore, Karnataka, India.) April 2010 to October 2010
Role: Assistant Design Engineer
A house of SPM for coil winding machine manufacturing company. Design and development of
new machines which advance in the field of Coil winding manufacture.
Design of New Machines which helps to advance, adopt and bring a change in Coil winding
manufacturing field and Adopting new techniques in existing old machines.
.
PROJECTS HANDLED:
Title: Programmable coil winding machine
Cad tool: AutoCAD
Special purpose of programmable coil winding machine, used to winding the coil in bobbin. Wire
gauge 1.0mm to 2.5mm up to this machine can wind and the winding speed is 0 to 300rpm.
Winding width is 300 to 400mm, because we provide the adjustment in tail stock. These winding
coils are used in transformer.
Title: Paper folding Machine
Cad tool: AutoCAD
It is a new type of machine to fold the paper (2fold, 3fold). 0.5 to 2mm thickness of paper can fold
the machine. These folding papers are used as insulator between layers of winding coil.
SPM INDIA LTD (Bangalore, Karnataka, India.) October 2010 to October 2012
Role: Design Engineer
Manufacturer of Special Purpose Machines / Test Rigs, Jigs & Fixtures and Hydraulic
Clamping Devices, Leak Testing machines, Pressing machines for Engine blocks, heads, Engine
assembly lines.
 Design of Machines as per the Customer Requirement,
 Development of new methods.
PROJECTS HANDLED:
Title: Leak Testing Machine.
Clients: Mahindra & Mahindra
Cad tool: AutoCAD and Solid works.
Modular Leak Testing machine is a Type of Leak Testing Machine, which is used to test the
multiple Components such as NEF 4-Cylinder, NEF 3-Cylinder,VNEF 4-Cylinder, M-star 4-
Cylinder etc individually in One Machine.

3. Components is Loaded individually in signal fixture, which in turn fixed on the
Modular LTM., tested as per the customer stated timings and Leak Rate. Finally whether the
component is good or Not-Good will be collected on Separate side of the machine.
Title: Main Bearing Cap Assembly Machine.
Clients: Volvo-Eicher Commercial Vehicle
Cad tool: AutoCAD and Solid works
This Machine mainly consists of Fixture, Pick-Place, Nut-runner, Engraving unit. Engine
block is manually loaded over a chain conveyor. Conveyor pallet goes down when Engine block
butt against end stopper. Main bearing cap is loaded over engine block by pick and place
mechanism. Then nut runner assembly comes down and tightens the bolt. If the preset value of
Torque not achieved, Components gets rejected through NG conveyor. Engraving unit engrave the
Customer given symbol when the components gets accepted.
FELSOMAT INDIA Pvt. Ltd.-Bangalore October 2012 to August 2014
Role: Design Engineer
Felsomat India Pvt. Ltd is a 100% subsidiary of Felsomat GmbH Head quartered in Koenigsbach-
Stein, near Stuttgart in Germany; Felsomat has 35 years of rich experience in automating the
production lines at various automobile companies and the component suppliers, Felsomat
Diversified into Gear Manufacturing Machines and Assembly.
PROJECTS HANDLED:
Title: Automation for Shaft Main..
Clients: Ace Designers Limited
Cad tool: AutoCAD and Solid Edge.
Gantry system for Shaft Main consist 3 ACE machines. This is used to loading and unloading the
component between machines. Gantry system has 7.5 m longitudinal beam length (Z-axis), Single
vertical axis (I loader) with 550 mm vertical stroke (Y-axis) and transverse shuttle.
Title: Automation for Bolt Hole Cell.
Clients: Sansera Engineering Pvt Ltd.
Cad tool: AutoCAD and Solid Edge
Gantry system for Bolt Hole Cell This gantry is fully automated, it mainly consists of input loader,
and output unloaded, gantry system, return line conveyor. One’s operator loader the component on
pallet, pusher unit push the pallet to gantry pick up station. Gantry pick the pallet from pickup
station and load to M/c fixture, after finishing the operation gantry pick the pallet from fixture and
drops in unloading conveyor, hear operator unloads the component, empty pallet goes to return line
conveyor.
HCL TECHNOLOGIES LTD. August 2014 to till date

4. Project type: NEW PRODUCT DEVELOPMEMT
Title: CRC-Evans Automatic Welder Design
Clients: CRC-Evans
Products: Automatic Welder Design
 Aligning the automatic weld unit for the pipe weld location - horizontal direction.
 Finalizing the gripping arm concept for various pipe dia. to hold both the pipes in shape.
 Alignment of both the pipes before welding – vertical direction.
 Design to apply crowd force to lock the pipes in position before welding
 Guide track design.
 Design to accommodate multiple degrees of freedom for welding torch, grinding wheel &
laser arm.
 Enclosure design with provision to accommodate manual grinding option.
Automatic Welder is fully automated, it mainly consists of clamping unit, guide track unit, welding
unit and grinding unit. Creating new concept for clamping and guide track systems review with
Client and updating as per client requirement. Modified the existing weld unit with compact design
and added degrees of motions. Incorporate design changes in CAD data and deliver to analysis team
and create 2D fabrication drawings, assembly drawings / engineering documents per defined
standards
STRENGTH
 Self-Confident
 Management Skills
 Ability to work independently
 Smart Thinking
 Learn ability
 Energetic
PERSONAL DETAILS
Father name : B.N Chaluvegowda
Languages Known : Kannada, English Hindi and Telugu.
Nationality : Indian
Date of Birth : 17/07/1987
Hobbies : Listening music, playing cricket.
DATE: THANKING YOU
PLACE: BANGALORE
(DilipKumar B C)