Preventive Maintenance Strategies for Power Distribution Systems- Charles AlvisSchneider Electric
As presented at AIST 2014, A comprehensive, routine preventive maintenance and testing program is the way to ensure your facility's electrical equipment and components operate properly and for as long as possible. "Preventive Maintenance Strategies for Power Distribution Systems" will present how to implement an effective program at your facility. The presentation will also show you how regularly scheduled preventive maintenance can improve operational safety and energy efficiency within your organization.
Operational Cost Avoidance through Harmonic Mitigation in Industrial Environm...Schneider Electric
Industrial sites suffer from margin erosion because operations and equipment costs are not efficiently controlled. Such costs can be avoided if the proper harmonic mitigation solution is implemented. This paper reviews several approaches to harmonic mitigation and identifies best practices.
This document provides an overview of Eaton's wiring manual and products, including updates to the new edition. It discusses Eaton's expertise from switching systems to medium voltage products. The document also highlights Eaton's online resources and technical support.
Impact of IEC 61508 Standards on Intelligent Electrial Networks and Safety Im...Schneider Electric
Improper integration of Intelligent Electronic Devices (IED) into medium / high voltage electrical networks can impact both network performance and safety. Now, standards such as IEC 61508 provide a framework from which new safety risks can be managed. This paper simplifies the complexity of integrating new devices into existing grid networks by explaining how to implement IEC safety and maintenance standards. Examples are presented for how to minimize cost and maximize safety benefits.
Power Protection for Digital Medical Imaging and Diagnostic EquipmentSchneider Electric
Medical imaging and diagnostic equipment (MIDE) is
increasingly being networked to Picture Archiving and
Communications Systems (PACS), Radiology Information
Systems (RIS), Hospital Information Systems
(HIS), and getting connected to the hospital intranet as
well as the Internet. Failing to implement the necessary
physical infrastructure can result in unexpected
downtime, and safety and compliance issues, which
translates into lost revenue and exposure to expensive
litigations, negatively affecting the bottom line. This
paper explains how to plan for physical infrastructure
when deploying medical imaging and diagnostic
equipment, with emphasis on power and cooling.
Open Compute has had a revolutionary impact on data center design ,offering many simplicity and cost saving benefits. To become more mainstream, we believe critical questions need to be answered about the implications of OCP on the upstream power infrastructure. Can data centers still achieve Tier 3 redundancy? How do I support traditional and OCP loads in the same data center? This presentation will address these and other questions, and propose a series of simplified architectures to support OCP. We will discuss redundancy, availability, and flexibility implications, as well as present a cost analysis. Schneider Electric embraces the spirit of OCP by openly sharing this analysis and making these simplified reference designs freely available
Schneider Electric offers training programs for installers of their single-phase and three-phase solar inverter systems. Their single-phase training provides hands-on instruction on installing Xantrex, Conext, and GT series inverters, while covering product features and system wiring. Their three-phase training focuses on operating, maintaining, and troubleshooting larger solar farm systems using the GT500 MV, GT500 E, and GT250 inverters. Both programs aim to give installers the working knowledge needed for startup, operation, and maintenance of Schneider Electric's grid-tie inverter solutions.
Preventive Maintenance Strategies for Power Distribution Systems- Charles AlvisSchneider Electric
As presented at AIST 2014, A comprehensive, routine preventive maintenance and testing program is the way to ensure your facility's electrical equipment and components operate properly and for as long as possible. "Preventive Maintenance Strategies for Power Distribution Systems" will present how to implement an effective program at your facility. The presentation will also show you how regularly scheduled preventive maintenance can improve operational safety and energy efficiency within your organization.
Operational Cost Avoidance through Harmonic Mitigation in Industrial Environm...Schneider Electric
Industrial sites suffer from margin erosion because operations and equipment costs are not efficiently controlled. Such costs can be avoided if the proper harmonic mitigation solution is implemented. This paper reviews several approaches to harmonic mitigation and identifies best practices.
This document provides an overview of Eaton's wiring manual and products, including updates to the new edition. It discusses Eaton's expertise from switching systems to medium voltage products. The document also highlights Eaton's online resources and technical support.
Impact of IEC 61508 Standards on Intelligent Electrial Networks and Safety Im...Schneider Electric
Improper integration of Intelligent Electronic Devices (IED) into medium / high voltage electrical networks can impact both network performance and safety. Now, standards such as IEC 61508 provide a framework from which new safety risks can be managed. This paper simplifies the complexity of integrating new devices into existing grid networks by explaining how to implement IEC safety and maintenance standards. Examples are presented for how to minimize cost and maximize safety benefits.
Power Protection for Digital Medical Imaging and Diagnostic EquipmentSchneider Electric
Medical imaging and diagnostic equipment (MIDE) is
increasingly being networked to Picture Archiving and
Communications Systems (PACS), Radiology Information
Systems (RIS), Hospital Information Systems
(HIS), and getting connected to the hospital intranet as
well as the Internet. Failing to implement the necessary
physical infrastructure can result in unexpected
downtime, and safety and compliance issues, which
translates into lost revenue and exposure to expensive
litigations, negatively affecting the bottom line. This
paper explains how to plan for physical infrastructure
when deploying medical imaging and diagnostic
equipment, with emphasis on power and cooling.
Open Compute has had a revolutionary impact on data center design ,offering many simplicity and cost saving benefits. To become more mainstream, we believe critical questions need to be answered about the implications of OCP on the upstream power infrastructure. Can data centers still achieve Tier 3 redundancy? How do I support traditional and OCP loads in the same data center? This presentation will address these and other questions, and propose a series of simplified architectures to support OCP. We will discuss redundancy, availability, and flexibility implications, as well as present a cost analysis. Schneider Electric embraces the spirit of OCP by openly sharing this analysis and making these simplified reference designs freely available
Schneider Electric offers training programs for installers of their single-phase and three-phase solar inverter systems. Their single-phase training provides hands-on instruction on installing Xantrex, Conext, and GT series inverters, while covering product features and system wiring. Their three-phase training focuses on operating, maintaining, and troubleshooting larger solar farm systems using the GT500 MV, GT500 E, and GT250 inverters. Both programs aim to give installers the working knowledge needed for startup, operation, and maintenance of Schneider Electric's grid-tie inverter solutions.
Basic Concepts for an Integrated Steel Process Control SystemSchneider Electric
For the past few years, the market was preoccupied with discussions about terminology such as: distributed control systems (DCS), programmable logic controllers (PLC), and the “newcomers” hybrid control systems (HCS) and programmable automation controllers (PAC), and how each should be applied to steel and metals processing applications. Steel manufacturing is an industry that requires specific approaches for control systems; it mixes process, machines, discrete control, several motors, high-availability systems and involves massive amounts of variables and architectures that requires flexible topologies. Better understand these technologies, myths and facts, and learn the real needs and trends for control systems in steel and metals industries, regardless of labels and acronyms. Copyright AIST Reprinted with Permission
How the Convergence of IT and OT Enables Smart Grid DevelopmentSchneider Electric
The goal for any utility that invests in smart grid technology is to attain higher efficiency and reliable performance.
A smart grid platform implies the convergence of Operations Technology (OT) – the grid physical infrastructure assets and applications–and Information Technology (IT) – the human interface that enables rapid and informed decision making.
This paper describes best practices for migrating to a scalable, adaptable, smart grid network.
Do IT administrators violate arc flash requirements
when they turn off or reset a branch circuit breaker?
What about swapping out a rack power strip? Most
data center operators are familiar with fire safety and
shock hazard protection, but are less familiar with arc
flash safety. Three IT trends have increased the
severity of a potential arc flash in the IT space; higher
data center capacities, higher rack densities, and
higher efficiency designs.
This paper discusses these three trends in the context
of arc flash safety within the IT space. Arc flash is
explained, potential areas of concern in the IT space
are identified, and compliance with associated regulations
is discussed.
Four practical steps are proposed to reduce energy costs:
1) Measure consumption through energy audits and meters to establish a baseline.
2) Fix basics like installing variable speed drives or high-efficiency UPS for immediate impact.
3) Automate systems to eliminate human behavior and finely tune energy efficiency.
4) Monitor through software to identify waste and enable quick response before money is wasted. Energy management is a continuous improvement loop.
A quick reference guide highlighting the 2014 changes in the National Electrical Code and the associated impact on engineers, contractors, and inspectors.
The document describes a containerized power distribution center (PDC) solution designed and constructed by Eaton for an oil and gas company in NSW, Australia. The PDC solution utilizes Eaton's Power Xpert CX and UX equipment and was fully assembled, tested, and transported in a self-contained switchroom structure weighing 69.5 tons. The solution provides safe and reliable electrical power distribution for the company's gas storage and supply operations through extensive safety features and testing of the equipment.
Get with the system - Rogerio Martins, Schneider Electric disucsses the advantages of modern distributed control systems in coal handling preparation plants.
There are many factors in the data center that are driving the new data center design considerations. This slideshare discusses several of the trends in the data center and covers several solutions to implement.
Essential Elements of Data Center Facility OperationsSchneider Electric
This presentation describes unique management principles and provides a comprehensive, high-level overview of the necessary program elements for operating a mission critical facility efficiently and reliably throughout its life cycle. Practical management tips and advice are also given.
The Schneider Electric MetConsole® Low Level Wind Shear Alert System (LLWAS) – a module of the company’s MetConsole Aviation Weather Suite – provides the reliable and timely information and alerting to the gust fronts, downbursts or microbursts induced by thunderstorms. It helps minimize disruptions, caused by these wind shear conditions, to aircraft flying below 1,000 feet while approaching and departing airports.
Optimizing distribution network operations involves leveraging leading industry trends such as platform consolidation, IT/OT convergence, big data analytics, and distributed energy resource management. An advanced distribution management system (ADMS) provides a comprehensive network management solution that can integrate monitoring, analysis, control, optimization, planning and training tools on a common infrastructure. Utilities are adopting solutions that leverage internet of things connectivity between intelligent field devices to provide layers of information exchange and control. Distributed energy resources like solar, wind, storage and microgrids can provide utilities alternatives to building new generation and transmission assets when used for peak relief, voltage support and grid resiliency.
Wood-Mizer in Indianapolis, IN, one of the world’s
leading industrial sawmill manufacturers, has developed
the next generation of industrial sawmills by combining
a thin-kerf blade and advanced automation technology
for maximum log yield and profitability.
The document discusses Schneider Electric's self-healing solution for underground electrical distribution grids. The solution uses Easergy T200 control units installed at substations to enable peer-to-peer communication over an IP network. In the event of a fault, the units automatically isolate the fault and restore power to unaffected areas in under 30 seconds, improving reliability and reducing outage times for customers. The solution offers benefits like quick installation, cost-effectiveness, and scalability without needing additions to the distribution management system.
Many newer UPS systems have an energy-saving operating mode known as “eco-mode” or by some other descriptor. Nevertheless, surveys show that virtually no data centers actually use this mode, because of the known or anticipated side-effects. Unfortunately, the marketing materials for these operating modes do not adequately explain the cost / benefit tradeoffs. This paper shows that eco-mode provides a reduction of approximately 2% in data center energy consumption and explains the various limitations and concerns that arise from eco-mode use. Situations where these operating modes are recommended and contraindicated are also described.
This document discusses the benefits of modular data center design and proposes a common language for specifying modular architectures. It outlines desired characteristics like flexibility, scalability, and cost effectiveness. Standardization and scalability are key goals of modularity. The document defines modular architecture and discusses how modularity can be implemented at different levels and through different linkages between subsystems. Benefits include lower costs, simpler expansion, and pre-characterized performance. Challenges include vendor lock-in and site compatibility. Future trends may include increased packaging of subsystems and the emergence of industry standards.
The document discusses grid protection systems and new technologies. It covers topics like wide area monitoring, grid stability and security, power system overviews, and protection systems. It describes challenges facing energy systems from changing infeed patterns and the need for smart grid solutions. Siemens provides integrated solutions for transmission and distribution applications, renewable integration, and demand response/virtual power plants. Security is a key concern, with priorities of availability, integrity, and confidentiality to prevent cyber attacks on critical grid infrastructure. Standards like IEC TC57 provide reference architectures for smart grid communication.
AMETEK Solidstate Controls is a recognized global leader in the manufacture of industrial power equipment. Some of the energy products manufactured are uninterruptible power supply systems, industrial inverters, renewable energy inverters, battery chargers, power conditioners, bypass switches, monitoring equipment, cathodic protection rectifiers.
Scenarios for Specifying an Uninterruptible Power Supply for Industrial Appli...Classic Controls, Inc.
For a number of years, some industries have used UPSs as a matter of course in applications requiring
uninterrupted process control. These include power-generation facilities, both fossil and nuclear, and petrochemical
plants and refineries.
Recently, other types of industrial companies (pulp and paper mills, steel mills, pharmaceutical manufacturing and
cogeneration facilities) have created a need for UPSs by incorporating DCSs into their plants to control their
processes. Additional control equipment, such as supervisory control and data acquisition (SCADA) systems,
energy management systems (EMSs), boiler-control and microprocessor-based instrumentation, give power
protection an even more important role in industry.
Basic Concepts for an Integrated Steel Process Control SystemSchneider Electric
For the past few years, the market was preoccupied with discussions about terminology such as: distributed control systems (DCS), programmable logic controllers (PLC), and the “newcomers” hybrid control systems (HCS) and programmable automation controllers (PAC), and how each should be applied to steel and metals processing applications. Steel manufacturing is an industry that requires specific approaches for control systems; it mixes process, machines, discrete control, several motors, high-availability systems and involves massive amounts of variables and architectures that requires flexible topologies. Better understand these technologies, myths and facts, and learn the real needs and trends for control systems in steel and metals industries, regardless of labels and acronyms. Copyright AIST Reprinted with Permission
How the Convergence of IT and OT Enables Smart Grid DevelopmentSchneider Electric
The goal for any utility that invests in smart grid technology is to attain higher efficiency and reliable performance.
A smart grid platform implies the convergence of Operations Technology (OT) – the grid physical infrastructure assets and applications–and Information Technology (IT) – the human interface that enables rapid and informed decision making.
This paper describes best practices for migrating to a scalable, adaptable, smart grid network.
Do IT administrators violate arc flash requirements
when they turn off or reset a branch circuit breaker?
What about swapping out a rack power strip? Most
data center operators are familiar with fire safety and
shock hazard protection, but are less familiar with arc
flash safety. Three IT trends have increased the
severity of a potential arc flash in the IT space; higher
data center capacities, higher rack densities, and
higher efficiency designs.
This paper discusses these three trends in the context
of arc flash safety within the IT space. Arc flash is
explained, potential areas of concern in the IT space
are identified, and compliance with associated regulations
is discussed.
Four practical steps are proposed to reduce energy costs:
1) Measure consumption through energy audits and meters to establish a baseline.
2) Fix basics like installing variable speed drives or high-efficiency UPS for immediate impact.
3) Automate systems to eliminate human behavior and finely tune energy efficiency.
4) Monitor through software to identify waste and enable quick response before money is wasted. Energy management is a continuous improvement loop.
A quick reference guide highlighting the 2014 changes in the National Electrical Code and the associated impact on engineers, contractors, and inspectors.
The document describes a containerized power distribution center (PDC) solution designed and constructed by Eaton for an oil and gas company in NSW, Australia. The PDC solution utilizes Eaton's Power Xpert CX and UX equipment and was fully assembled, tested, and transported in a self-contained switchroom structure weighing 69.5 tons. The solution provides safe and reliable electrical power distribution for the company's gas storage and supply operations through extensive safety features and testing of the equipment.
Get with the system - Rogerio Martins, Schneider Electric disucsses the advantages of modern distributed control systems in coal handling preparation plants.
There are many factors in the data center that are driving the new data center design considerations. This slideshare discusses several of the trends in the data center and covers several solutions to implement.
Essential Elements of Data Center Facility OperationsSchneider Electric
This presentation describes unique management principles and provides a comprehensive, high-level overview of the necessary program elements for operating a mission critical facility efficiently and reliably throughout its life cycle. Practical management tips and advice are also given.
The Schneider Electric MetConsole® Low Level Wind Shear Alert System (LLWAS) – a module of the company’s MetConsole Aviation Weather Suite – provides the reliable and timely information and alerting to the gust fronts, downbursts or microbursts induced by thunderstorms. It helps minimize disruptions, caused by these wind shear conditions, to aircraft flying below 1,000 feet while approaching and departing airports.
Optimizing distribution network operations involves leveraging leading industry trends such as platform consolidation, IT/OT convergence, big data analytics, and distributed energy resource management. An advanced distribution management system (ADMS) provides a comprehensive network management solution that can integrate monitoring, analysis, control, optimization, planning and training tools on a common infrastructure. Utilities are adopting solutions that leverage internet of things connectivity between intelligent field devices to provide layers of information exchange and control. Distributed energy resources like solar, wind, storage and microgrids can provide utilities alternatives to building new generation and transmission assets when used for peak relief, voltage support and grid resiliency.
Wood-Mizer in Indianapolis, IN, one of the world’s
leading industrial sawmill manufacturers, has developed
the next generation of industrial sawmills by combining
a thin-kerf blade and advanced automation technology
for maximum log yield and profitability.
The document discusses Schneider Electric's self-healing solution for underground electrical distribution grids. The solution uses Easergy T200 control units installed at substations to enable peer-to-peer communication over an IP network. In the event of a fault, the units automatically isolate the fault and restore power to unaffected areas in under 30 seconds, improving reliability and reducing outage times for customers. The solution offers benefits like quick installation, cost-effectiveness, and scalability without needing additions to the distribution management system.
Many newer UPS systems have an energy-saving operating mode known as “eco-mode” or by some other descriptor. Nevertheless, surveys show that virtually no data centers actually use this mode, because of the known or anticipated side-effects. Unfortunately, the marketing materials for these operating modes do not adequately explain the cost / benefit tradeoffs. This paper shows that eco-mode provides a reduction of approximately 2% in data center energy consumption and explains the various limitations and concerns that arise from eco-mode use. Situations where these operating modes are recommended and contraindicated are also described.
This document discusses the benefits of modular data center design and proposes a common language for specifying modular architectures. It outlines desired characteristics like flexibility, scalability, and cost effectiveness. Standardization and scalability are key goals of modularity. The document defines modular architecture and discusses how modularity can be implemented at different levels and through different linkages between subsystems. Benefits include lower costs, simpler expansion, and pre-characterized performance. Challenges include vendor lock-in and site compatibility. Future trends may include increased packaging of subsystems and the emergence of industry standards.
The document discusses grid protection systems and new technologies. It covers topics like wide area monitoring, grid stability and security, power system overviews, and protection systems. It describes challenges facing energy systems from changing infeed patterns and the need for smart grid solutions. Siemens provides integrated solutions for transmission and distribution applications, renewable integration, and demand response/virtual power plants. Security is a key concern, with priorities of availability, integrity, and confidentiality to prevent cyber attacks on critical grid infrastructure. Standards like IEC TC57 provide reference architectures for smart grid communication.
AMETEK Solidstate Controls is a recognized global leader in the manufacture of industrial power equipment. Some of the energy products manufactured are uninterruptible power supply systems, industrial inverters, renewable energy inverters, battery chargers, power conditioners, bypass switches, monitoring equipment, cathodic protection rectifiers.
Scenarios for Specifying an Uninterruptible Power Supply for Industrial Appli...Classic Controls, Inc.
For a number of years, some industries have used UPSs as a matter of course in applications requiring
uninterrupted process control. These include power-generation facilities, both fossil and nuclear, and petrochemical
plants and refineries.
Recently, other types of industrial companies (pulp and paper mills, steel mills, pharmaceutical manufacturing and
cogeneration facilities) have created a need for UPSs by incorporating DCSs into their plants to control their
processes. Additional control equipment, such as supervisory control and data acquisition (SCADA) systems,
energy management systems (EMSs), boiler-control and microprocessor-based instrumentation, give power
protection an even more important role in industry.
Application Note – UPS Power System Design ParametersLeonardo ENERGY
This application note is intended to be a source of guidance and to help reduce confusion pertaining to the design, configuration, selection, sizing, and installation of Uninterruptable Power Supply (UPS) systems. This document is a useful information source for electrical consultants, electrical engineers, facility managers, and design and build contractors.
In the recent past, many design engineers have tried to create the perfect UPS solution for supporting critical loads. However, these designs have generally overlooked coverage for changing load profiles (e.g. leading power factor), sleep mode, and advanced scalability solutions. Such solutions and/or options can assist in gaining higher system efficiency, without exposing the critical load to disruptions from the utility.
This paper presents information related to various generic types of current UPS units, complete with their merits and demerits. It covers different topologies and various system solutions for clients. Auxiliary items, such as the battery bank, diesel generator set, and switchgear are included in the document since they also form an integral part of a UPS system.
To aid in the reduction of the carbon footprint, the paper has indicated achievable operational efficiency figures for different solutions.
A typical generic UPS Specification has been included as an Appendix to this paper to support electrical engineering professionals.
1. The document discusses uninterruptible power supplies (UPS) which provide backup power during power outages to critical electronic equipment. UPS systems use batteries to store energy and convert it to AC power during an outage.
2. Traditional UPS systems have room for improvement in terms of efficiency, output power quality, and cost. The purpose of the project is to design an improved UPS system with a microcontroller for monitoring and higher efficiency inverter.
3. Key aspects of UPS design include balancing cost and performance, output waveform quality, and system topology. The document explores various UPS classifications and components like rectifiers, inverters, and static switches.
How to enhance hyperconvergence with infrastructure managementrdelima
Hyperconverged solutions provide benefits like scalability and efficiency, but require advanced uninterruptible power supplies (UPS) and power distribution units (PDU) to ensure business continuity. Power disruptions are especially detrimental in virtualized environments where server power demands can shift instantly. Implementing a consolidated IT infrastructure with resilient power management enables organizations to lower costs through features like load shedding, power capping, and remote management while gaining simplified operations and configuration.
IRJET- Automatic Load Balancing and Phase Balancing by PLC and ScadaIRJET Journal
This document describes an automatic load balancing and phase balancing system using a programmable logic controller (PLC) and supervisory control and data acquisition (SCADA). The proposed system aims to automatically shed non-essential loads in the event of a generator tripping to balance power consumption and generation. A PLC is used for data logging, control operations, and communication between individual systems. A human-machine interface (HMI) is also developed to allow engineers to monitor the process and modify load priority settings. The system is intended to help industries maintain normal plant operations when relying on multiple power sources.
The Panduit no battery, maintenance-free UPS lowers the risk of downtime, provides lower TCO and features easy integration and remote device management.
Global adoption of automation, AI, and robotics to increase productivity is
inseparable from monitoring and managing equipment remotely. Teltonika
Networks has long-standing experience in this field, enabling manufacturers,
integrators, and machine builders to stay in control of their equipment
anytime, anywhere
UPS SYSTEMS TAMIN TABLO JOVIATLAS General Catalouge Pr. Tamin Tablo
Wärtsilä JOVYATLAS designs and manufactures uninterruptible power supply (UPS) systems ranging from 625VA to 800kVA or multiple megawatt system solutions. UPS systems provide backup power in the event of power outages or failures to ensure critical systems have reliable power. They protect equipment from issues caused by poor power quality or blackouts. UPS systems have many applications from personal computers to large industrial production lines where uninterrupted power is important.
POWER CONSUMPTION DETECTING AND ALERTING SYSTEMIRJET Journal
This document describes a power consumption detecting and alerting system. The system continuously monitors home appliance power consumption and calculates unit usage to alert consumers when they are close to exceeding the current electricity rate slab. When the slab rate threshold is reached, auxiliary loads will automatically be cut off and a message will be sent to the consumer. The system aims to help consumers efficiently use power from the grid and maintain a low electricity bill. It uses components like a microcontroller, relays, LCD display, step-down transformer, buzzer, and potentiometer. The system works by measuring power usage, calculating units, and sending alerts via buzzer and messages if the slab rate is approached or exceeded to encourage reduced consumption.
(a)What do you mean by smart substation, smart feeders & Transmission system?
(b)What is need of smart substation, smart feeders & Transmission system?
(c) What are various merits and benefits of smart substation, smart feeders & Transmission system?
(d) Various technologies to make adjusting system into smart substation, smart distribution & Transmission system?
Detection of Power Grid Synchronization Failure on Sensing Frequency and Volt...IRJET Journal
This document presents a system to detect power grid synchronization failures by sensing abnormalities in frequency and voltage. The system uses an Arduino microcontroller to monitor voltage and frequency from sensors. If the values go outside acceptable limits, it triggers a relay to disconnect the load and sends alerts by GSM and GPS. The system aims to prevent blackouts by detecting issues early and allowing time for response. It was tested using loads like lamps and successfully detected and responded to over/under voltage and frequency changes by displaying warnings on an LCD. This provides automatic grid protection while synchronizing multiple generation sources in parallel.
The document discusses optimizing facility efficiency in federal mission-critical environments. It recommends taking a long-term approach to planning by understanding organizational goals and bridging IT and facilities. Key steps include assessing existing facilities, selecting efficient equipment, right-sizing capacity, and establishing monitoring, maintenance, and benchmarking programs to ensure optimization over time. Regular maintenance is emphasized as critical for sustained efficiency gains and reliability.
This document discusses the importance of improving the efficiency of switch mode power supplies (SMPS) used in telecommunications and industrial equipment. SMPS are crucial as they efficiently convert incoming power sources like AC grids or batteries into regulated DC power needed to operate electronic circuit boards. With growing technological demand, improving SMPS efficiency by even 1% can result in significant cost savings for operators with large networks. The document also mentions new technologies like gallium nitride that promise further efficiency gains for SMPS. Overall, optimizing SMPS efficiency across all loads is seen as an important requirement given rising energy costs and environmental concerns.
Uninterruptible power adoption trends to 2025Sergey Yrievich
This document discusses trends in uninterruptible power supply (UPS) adoption for data centers through 2025. Key findings include:
- Centralized UPS systems will likely continue to dominate in large data centers (over 1 MW capacity), especially those owned by enterprises and colocation providers.
- Distributed UPS systems with batteries at the rack level will see limited growth due to technical challenges and customer preferences for centralized systems.
- Medium voltage UPS adoption will remain low due to concerns over costs, reliability, safety, and operational complexity compared to traditional low voltage UPS systems.
- While centralized UPS is widely used, pain points around battery maintenance and reliability will likely persist through 2025 without new technologies or approaches.
This document discusses distributed generation (DG) interconnection protection. It provides an overview of DG, including types of DGs and interconnection protection. It describes protection variables and standards, including what IEEE 1547 does and does not address. It also outlines challenges for protection engineers in ensuring seamless integration of DGs into utility protection systems.
The document is a brochure for the Eaton 93E UPS that provides energy-efficient power protection for IT environments from 80-200 kVA. Some key features include a transformer-free 98.5% efficient design, compatibility with modern 0.9 power factor equipment, high reliability through patented paralleling technology, a compact footprint up to 60% smaller than competitors, and easy serviceability with a mean time to repair of less than 30 minutes. The 93E UPS delivers simply effective power protection for data centers and applications requiring reliable power protection.
AUTOMATIC VOLTAGE CONTROL OF TRANSFORMER USING MICROCONTROLLER AND SCADA Ajesh Jacob
AUTOMATIC VOLTAGE CONTROL OF TRANSFORMER USING MICROCONTROLLER AND SCADA
LABVIEW PROJECT FINAL YEAR EEE
ABSTRACT: A tap changer control operates to connect appropriate tap position of winding in power transformers to maintain correct voltage level in the power transmission and distribution system. Automatic tap changing can be implemented by using µC. This improved tap-changing decision and operational flexibility of this new technique make it attractive for deployment in practical power system network. This paper deals with the implementation of µC based tap changer control practically, using special purpose digital hardware as a built-in semiconductor chip or software simulation in conventional computers. Two strategies are suggested for its implementation as a software module in the paper. One is to integrate it with the supervisory system in a substation control room operating in a LAN environment. In this configuration, the parallel transformers can be controlled locally. The other is to integrate it into the SCADA (Supervisory Control and Data Acquisition) system, which allows the transformers to be monitored and controlled remotely over a wide area of power-network. The implementation of µC based tap changer control needs interfacing between the power system and the control circuitry. µC s may need to interact with people for the purpose of configuration, alarm reporting or everyday control.
A human-machine interface (HMI) is employed for this purpose. An HMI is usually linked to the SCADA system’s databases and software programs, to provide trending, diagnostic data, and management information such as scheduled maintenance procedures, logistic information, detailed schematics for a particular sensor or machine, and expert-system troubleshooting guides.
OBJECTIVES: The original system can afford the following features:
- Complete information about the plant (circuit breakers status, source of feeding, and level of the consumed power).
- Information about the operating values of the voltage, operating values of the transformers, operating values of the medium voltage, load feeders, operating values of the generators. These values will assist in getting any action to return the plant to its normal operation by minimum costs.
- Information about the quality of the system (harmonics, current, voltages, power factors, flickers, etc.). These values will be very essential in case of future correction.
- Recorded information such case voltage spikes, reducing the voltage on the medium or current interruption.
- implementation of µC based tap changer control practically, using special purpose digital hardware as a built-in semiconductor chip or software simulation in conventional computers.
Intelligent management of electrical systems in industriespushpeswar reddy
This document discusses the intelligent management of electrical systems in industries. It notes that while industrial plants have increasingly automated processes, electricity distribution networks have not seen as much focus on automation. Disturbances in power supply can be very costly. The document then outlines some intelligent applications that are needed, including handling large amounts of information, illustrating complex dependencies, and giving operators instructions in fault situations. It describes distribution management functions like real-time monitoring, state estimation, topology management, and loss minimization. Finally, it concludes that while industrial distribution faces different challenges than public distribution, intelligent software methods can be promising.
IRJET - An Automatic Phase Selector from Any Available Three Phase Supply...IRJET Journal
This document describes the design and implementation of an automatic phase selector system that can select a single active phase from a three-phase power supply. The system uses relays and a gear motor to automatically switch the connection to a single-phase load to a different phase within seconds if the currently connected phase fails. This provides uninterrupted power to critical single-phase loads like prepaid meters. The system was tested and worked satisfactorily by quickly switching the load connection to an alternate active phase when the initial phase failed. This automatic switching eliminates downtime and reduces stress on staff compared to manual switching of phases during an outage.
Similar to Powering-Up the Industrial Network (20)
Managing the Impact and Cost of the IOT Data Explosion - Data Centre Converge...Panduit
For the past 10-15 years we have seen dynamic transformation in technology and key focus areas of the Data Centre to support evolving business needs. From Availability, Consolidation, Virtualisation, Energy Management and more recently Big Data, Mobility and Cloud. Facilities had to reduce the PUE, IT Compute had to become increasingly efficient and with reducing OPEX.
There never has been a greater need for having a Converged Infrastructure to connect and support the Data Centre. In this presentation Panduit introduce and discuss a Yahoo case study of real energy management reduction of up to 50%.
Managing the Impact and Cost of the IOT Data Explosion - Data Centre Converge...Panduit
Abstract: For the past 10-15 years we have seen dynamic transformation in technology and key focus areas of the Data Centre to support evolving business needs. From Availability, Consolidation, Virtualisation, Energy Management and more recently Big Data, Mobility and Cloud. Facilities had to reduce the PUE, IT Compute had to become increasingly efficient and with reducing OPEX.
There never has been a greater need for having a Converged Infrastructure to connect and support the Data Centre. In this presentation Panduit introduce and discuss a Yahoo case study of real energy management reduction of up to 50%.
The document discusses Panduit's Enterprise Business unit. It outlines Panduit's strategy to focus on the medium and large enterprise market segments through contractors, systems integrators and distributors. Key initiatives include growing in core vertical markets, improving the partner program, enhancing the customer experience, and developing innovative connectivity solutions like 28 AWG cabling and CAT8 products. The global structured cabling market is projected to grow at a CAGR of 3.6-3.7% through 2017, with Cat6A expected to increase significantly in enterprise applications.
Matthew O'Sullivan discusses Panduit's Industrial Automation Infrastructure offering which provides solutions for implementing industrial Ethernet networks. This includes pre-configured solutions like industrial distribution frames and network zone systems for distributing Ethernet throughout the plant floor. Panduit also provides solutions for delivering Ethernet to machines via control panel optimization and hardened cabling. Case studies demonstrate how Panduit's pre-configured solutions help customers standardize networks and speed deployment times.
IntraVUE: Providing advanced analytics for Industrial Ethernet ApplicationsPanduit
IntraVUE is software that provides advanced network monitoring and analytics for industrial automation applications. It offers graphical network views, data mining of network traffic, and generates reports to simplify support activities. The main goals of IntraVUE are to provide an easy-to-use interface for non-network experts to troubleshoot devices, reduce deployment and troubleshooting time, and provide insights for preventative maintenance.
Realise the Value in modern Data Center InfrastructurePanduit
Maximize performance and protect investments in data center infrastructure by following best practices for fiber optic certification testing. This includes a 6 step process of inspection, cleaning, basic and extended testing, documentation and troubleshooting. Extended testing with an OTDR can identify unnecessary bottlenecks and ensure links meet tight loss budgets, while documentation of test results provides valuable information. Adhering to fiber testing standards and using qualified instruments ensures infrastructure is future ready and the certification process is profitable.
Panduit provides pre-engineered building blocks to simplify robust industrial network deployments. These include micro data centers and intermediate distribution frames that accelerate implementation schedules and lower risk. Panduit's solutions help translate logical network designs into physical architectures based on converged plantwide Ethernet principles. This enables seamless IT and operational technology integration through a standardized physical infrastructure approach.
The document discusses the evolution of data center cabling standards to support higher bandwidth needs. It notes that multi-fiber push on (MPO) cabling has increased relevance for enabling migration paths to 40G, 100G, and potential 400G connectivity while reusing existing horizontal cabling infrastructure. The document emphasizes that using PanMPO connectors can help raise performance certainty, support faster testing and installation, and reduce capital expenses during upgrades from 10G to 40G/100G and beyond.
The Building Blocks of the Industrial NetworkPanduit
Panduit provides pre-configured industrial distribution frames (IDFs) that integrate networking equipment in a consistent and repeatable manner. The IDF solution includes a thermally validated enclosure with racks, cable management, and power supplies. It can accommodate switches, patch panels, and fiber connectivity in a secure and scalable design. The pre-configured IDF reduces engineering and installation time for deploying industrial Ethernet networks.
Next Generation Copper Applications IntroductionPanduit
The document provides an overview of an expert's background in telecommunications and datacoms over 30 years, including engineering roles at BBC World Service and managing sales teams. It then discusses what the expert will be doing in the new role of Business Development, which will involve identifying new business opportunities and providing strategic direction. Finally, it provides a brief explanation of what Business Development means and how it will collaborate with other functions like product management, sales, marketing and engineering.
This document discusses industrial automation infrastructure and services for partners. It describes the market segments served, including consumer goods, automotive, and heavy industries. It then discusses enabling manufacturing intelligence and the Internet of things. The remainder of the document focuses on examples of network and infrastructure design deliverables and phases. It emphasizes scaling services through partners to comprehensively serve end customers.
Software defined networking (SDN) is changing data center architecture by separating the network control plane from the forwarding plane. This allows a control plane to control multiple devices and provides benefits like lower latency, improved efficiency, and rapid service delivery. As SDN is adopted, data center architecture is moving from the traditional 3-tier model to a spine-leaf model with higher port density and longer optical cable connections between switches. This impacts the physical infrastructure requirements, which must support the increased fiber cabling and higher network speeds used in SDN-enabled spine-leaf architectures.
Panduit's SmartZone DCIM solution provides capabilities across power, cooling, asset, and security management to help customers optimize their physical infrastructure. It uses intelligent hardware and software to deliver actionable intelligence through a maturity model approach. The solution has received recognition from analysts for its capabilities and ability to deliver value. Panduit also partners with other solution providers to deliver integrated offerings.
Smart cities integrate digital technologies and data to improve urban services, reduce costs and resource consumption, and engage citizens. Key parameters that define smart cities include smart energy, buildings, mobility, infrastructure, governance, education, and healthcare. The global smart city market is expected to reach $1.565 trillion by 2025, with smart governance and education making up 24.6% of projects. Dubai has ambitious plans to become a pioneer smart city across telecoms, transportation, utilities, education, buildings, public safety, and tourism. System integrators will play a key role in converging sectors and providing unified smart city platforms and solutions.
The Panduit Partner Program is being improved and relaunched in January 2016 with a new portal. Based on feedback from partners, the improvements include more training, sales support, leads, and incentives. The new program will have four partner levels - Platinum, Gold, Silver, and Registered. Partners will need to meet requirements in areas like competency, sales targets, and benefits commitment to qualify for levels with increased benefits. The improvements aim to make it easier for partners to do business with Panduit and be rewarded for their commitment through a more profitable partnership.
Data Center Evolution: From Cabinets to Colocation, Cloud Computing and BeyondPanduit
Global data center investment is expected to grow to $283 billion by 2020, though the growth rate will decline steadily due to factors like virtualization and outsourced services. Currently most investment is in new builds, but consolidation and outsourcing are growing faster options. The number of global data centers has tripled in the last seven years to around 200,000 currently. Data center growth is shifting from in-house facilities to cloud and outsourced options as their confidence increases. This will help slow the growth of occupied data center space and power consumption while the data center industry continues its critical role anchoring businesses.
This document discusses Panduit's integrated data center solution. It summarizes trends in data consumption, networks, storage and the data center industry that are driving growth in data center infrastructure spending. Panduit aims to simplify the data center lifecycle through an integrated solution that spans design, procurement, deployment and operations. This is intended to accelerate projects, optimize costs and improve reliability.
This document summarizes Cisco's Internet of Things (IoT) solutions and strategy. It notes that IoT adoption is growing rapidly, with 50 billion smart devices projected by 2020. Cisco's IoT system provides an integrated architecture to connect devices, aggregate and analyze data, and deliver business outcomes across industries like manufacturing, transportation, utilities and more. The system includes components for edge computing, security, analytics and application enablement to help customers build customized IoT solutions. Cisco is working with partners to develop its IoT portfolio and address the complex challenges of IoT projects.
This document discusses how IT infrastructure is experiencing exponential growth and outlines several mega trends in mobile, cloud, big data and social. It then suggests professional services can help translate these trends into real business opportunities by assessing datacenter needs, improving efficiency, and ensuring resilience during growth. Specific services proposed include datacenter assessment, commissioning, upgrades, and testing infrastructure under real load conditions.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP