Pedal power pres
•Download as PPTX, PDF•
0 likes•443 views
The MEOW is a mobile trailer that carries six solar panels and four pedal-powered bikes. The bikes generate electricity to charge the MEOW's batteries when they are depleted. The Pedal Power project was first used at an anti-war protest and renewable energy fair. The MEOW was stolen in 2010 but later recovered and restored with community donations, though it is missing some original equipment.
Report
Share
Report
Share
Recommended
Senior Project1presentation
The document summarizes the design and construction of a single-rider human powered vehicle for a competition. It discusses the objectives to design and build a recumbent bike that can win races for speed and endurance. Key aspects summarized include the frame design using bamboo for its strength and lightweight properties, a chain drive system with a wide gear range, aerodynamic fairing construction using composite sandwich materials, and a total project budget of $4,060.
Pedal power
The document discusses the design of a bicycle powered generator system. It aims to provide low-cost, safe electricity to the 70% of people worldwide without access to power grids. The basic design involves a stationary bicycle connected to an alternator or dynamo that converts the spinning rear tire motion into a DC voltage. Additional components like rectifiers and DC-DC converters ensure a stable DC output that can power devices or charge batteries for storage. Factors like coupling efficiency and maintaining optimal voltage levels are also considered. The bicycle is highlighted as an efficient human-powered mechanism to generate electricity through pedaling motion. A sample prototype budget of 18,000 rupees is also provided.
Pedal operated power generation system
Pedal operated power generation system is a mechanical device which is used to transfer mechanical energy into the electrical energy.this is our final year project in my college.
Presentation2
This document describes the design and purpose of a pedal-powered generator and flour mill. The generator aims to produce electricity through pedaling to charge batteries and power devices, saving energy and reducing electricity bills. The flour mill is designed to grind wheat into flour using pedal power. Both systems use a bicycle mechanism and chain drive to transfer human power to the machines. The generator produces DC power to charge batteries while the flour mill uses rotating stone wheels to grind the wheat. The designs aim to provide off-grid power and milling solutions that are low-cost, easy to operate, and suitable for rural areas.
Power generation using human power and animal power
The document presents a proposal for generating power using human and animal power. It discusses using bicycles and animal labor like bulls to power generators through gearing systems. The generators would charge batteries, which could then power lights and other devices, providing electricity for remote areas without access to power grids. It provides calculations for bull and bicycle power systems and discusses components like alternators, batteries, and their connections. The proposal aims to provide off-grid power solutions in a sustainable and low-cost manner.
Solar bicycle
This document describes the design and testing of a solar-powered bicycle. Key features include:
1) It uses photovoltaic cells to absorb solar energy and charge a battery which powers a 250W hub motor mounted on the rear wheel.
2) Testing showed it can travel 15-20 km on battery power alone, with manual pedaling extending the range further.
3) It provides an affordable and sustainable transportation alternative, with no fuel costs after the initial purchase cost is recovered within 2 years based on fuel savings compared to a moped.
Smart cycle proposal
This document outlines a student project proposal to create a smart solar electric bicycle. The bicycle will be powered by a rechargeable battery that is charged by solar panels and a dynamometer during use. It will have three modes: pedal power only, pedal assist from the electric motor, or electric motor only. The project team will study component feasibility and availability, design the bicycle, purchase parts, fabricate the bicycle, and test it to improve any issues found. They provide a schedule to complete background research in the current semester and fabrication and testing in the next semester. The goal is to help make India aware of renewable energy options and technologies.
Project Report
This document provides details on the design of an electric bicycle powered by solar energy. It discusses the motivation for developing such a bicycle to provide environmentally friendly transportation. The design uses rechargeable batteries that can be charged through electricity in 2-3 hours or through solar panels in 4-6 hours. The bicycle reaches a maximum speed of 20km/hr and its parts are intended to be lightweight, affordable, and meet safety requirements. The document outlines the various components of the bicycle, including the solar panels, batteries, motor, and braking system, and how they are integrated into the bicycle's frame through welding.
Recommended
Senior Project1presentation
The document summarizes the design and construction of a single-rider human powered vehicle for a competition. It discusses the objectives to design and build a recumbent bike that can win races for speed and endurance. Key aspects summarized include the frame design using bamboo for its strength and lightweight properties, a chain drive system with a wide gear range, aerodynamic fairing construction using composite sandwich materials, and a total project budget of $4,060.
Pedal power
The document discusses the design of a bicycle powered generator system. It aims to provide low-cost, safe electricity to the 70% of people worldwide without access to power grids. The basic design involves a stationary bicycle connected to an alternator or dynamo that converts the spinning rear tire motion into a DC voltage. Additional components like rectifiers and DC-DC converters ensure a stable DC output that can power devices or charge batteries for storage. Factors like coupling efficiency and maintaining optimal voltage levels are also considered. The bicycle is highlighted as an efficient human-powered mechanism to generate electricity through pedaling motion. A sample prototype budget of 18,000 rupees is also provided.
Pedal operated power generation system
Pedal operated power generation system is a mechanical device which is used to transfer mechanical energy into the electrical energy.this is our final year project in my college.
Presentation2
This document describes the design and purpose of a pedal-powered generator and flour mill. The generator aims to produce electricity through pedaling to charge batteries and power devices, saving energy and reducing electricity bills. The flour mill is designed to grind wheat into flour using pedal power. Both systems use a bicycle mechanism and chain drive to transfer human power to the machines. The generator produces DC power to charge batteries while the flour mill uses rotating stone wheels to grind the wheat. The designs aim to provide off-grid power and milling solutions that are low-cost, easy to operate, and suitable for rural areas.
Power generation using human power and animal power
The document presents a proposal for generating power using human and animal power. It discusses using bicycles and animal labor like bulls to power generators through gearing systems. The generators would charge batteries, which could then power lights and other devices, providing electricity for remote areas without access to power grids. It provides calculations for bull and bicycle power systems and discusses components like alternators, batteries, and their connections. The proposal aims to provide off-grid power solutions in a sustainable and low-cost manner.
Solar bicycle
This document describes the design and testing of a solar-powered bicycle. Key features include:
1) It uses photovoltaic cells to absorb solar energy and charge a battery which powers a 250W hub motor mounted on the rear wheel.
2) Testing showed it can travel 15-20 km on battery power alone, with manual pedaling extending the range further.
3) It provides an affordable and sustainable transportation alternative, with no fuel costs after the initial purchase cost is recovered within 2 years based on fuel savings compared to a moped.
Smart cycle proposal
This document outlines a student project proposal to create a smart solar electric bicycle. The bicycle will be powered by a rechargeable battery that is charged by solar panels and a dynamometer during use. It will have three modes: pedal power only, pedal assist from the electric motor, or electric motor only. The project team will study component feasibility and availability, design the bicycle, purchase parts, fabricate the bicycle, and test it to improve any issues found. They provide a schedule to complete background research in the current semester and fabrication and testing in the next semester. The goal is to help make India aware of renewable energy options and technologies.
Project Report
This document provides details on the design of an electric bicycle powered by solar energy. It discusses the motivation for developing such a bicycle to provide environmentally friendly transportation. The design uses rechargeable batteries that can be charged through electricity in 2-3 hours or through solar panels in 4-6 hours. The bicycle reaches a maximum speed of 20km/hr and its parts are intended to be lightweight, affordable, and meet safety requirements. The document outlines the various components of the bicycle, including the solar panels, batteries, motor, and braking system, and how they are integrated into the bicycle's frame through welding.
Pgfs document
The document describes a project to generate electricity from speed breakers. It proposes using the kinetic energy of vehicles passing over speed breakers to power lights along roads. A mechanism is designed to convert the up-and-down motion of a speed breaker into rotational motion using a rack and pinion gear system. This rotation is amplified through a sprocket and chain assembly connected to a flywheel and generator to produce electricity that can be stored in a battery and used for lights. The document discusses the working principle, materials used, specifications and equipment required to implement the system.
48-52,Tesma402,IJEAST.pdf
This document describes a proposed design for a footstep power generation system using rack and pinion gears. The system would convert the kinetic energy from human footsteps into electrical energy. It proposes using racks attached to moving plates underneath a walking surface. Rack and pinion gears would convert the vertical motion of footfalls into rotational motion. This would turn a flywheel and dynamo to generate electricity. The document outlines the components, design calculations, and estimates the system could generate 10.925 kW of power per hour based on simulations. It suggests such systems could be useful for power generation at locations with many pedestrians like train stations or malls.
IRJET- Foot Step Power Generation
This document describes a system that generates electricity from the kinetic energy of human footsteps. The system uses a rack and pinion mechanism to convert the vertical motion of footsteps into rotational motion. Gears, chains, and sprockets transfer this rotational motion to power a dynamo, which generates electricity. The electricity is stored in a battery. The system aims to harvest energy from places with high foot traffic to generate useful power and reduce dependency on conventional energy sources. It provides a clean, renewable method of small-scale power generation using wasted kinetic energy from human movement.
Power Generation with StairCase
The document presents a proposal for generating power from footsteps on staircases using piezoelectric transducers. The system would convert the mechanical energy from footfalls on instrumented stair treads into electrical energy to power small loads like LED lights. It proposes installing the systems in locations with high foot traffic like train stations, airports, universities and stadiums to take advantage of renewable energy from human movement.
Electrical by speed braker
This document proposes generating electricity from speed breakers. It suggests using the kinetic energy of vehicles passing over speed bumps to power generators via various mechanisms. Specifically, it describes using a rack and pinion mechanism to convert a vehicle's downward force into rotational motion to turn a generator. Challenges in constructing a prototype generator are discussed. While the initial output was low, the document argues this demonstrates the viability of the concept for producing electricity from speed breakers, with potential for increased output through optimization.
Presentation shivam e bike
This is all about design and fabrication of E-bike. I hope this is helpful for all engineering student.
Smart cycle presentation
The document describes a solar-powered electric bicycle called the Smart Cycle. It has the following key features:
- It is powered by a battery that is charged by solar panels as well as a dynamo for backup charging.
- It can travel up to 15-20 mph using a permanent magnet DC motor powered by the battery.
- CAD drawings were created to design the frame and show placements of the solar panels, battery, and other components.
- The battery is a 12V 10AH lead-acid type for its life and efficiency. The motor is a 400W 24V PMDC motor for its starting torque.
SOLAR POWERED BICYCLE
This document describes a solar powered bicycle. It includes sections on the objectives of creating a solar powered bicycle, the methodology used including assembling the components and connecting them, issues that arose and their solutions, and future aspects and advantages. The key components are a 500W DC motor, solar panels that charge lead acid batteries, and a chain drive system to connect the motor to the rear wheel. The goals are to power the bicycle using solar energy to reduce human effort for transportation over short distances.
POWER GENERATION BY SPEED BREAKER
While moving, the vehicles possess some kinetic energy and it is being wasted. This kinetic energy can be utilized to produce power by using a special arrangement called POWER HUMP (SPEED BREAKER
Power generation from speed
This document describes a project to generate electricity from speed breakers using the kinetic energy of passing vehicles. It discusses using a rack and pinion mechanism to convert the up and down motion of the speed breaker into rotational motion that can power a generator. The objectives are to produce electricity at very low cost and address power shortages. Advantages include pollution-free power, simple design, and not requiring manual labor. Future work could optimize the design for heavier vehicles to increase output. The conclusion states this is a step towards exploring non-conventional energy sources as conventional fuels deplete.
P.generation from speed breaker
Generation of Electricity from Speed-Breakers
The document proposes a method to generate electricity from the potential energy of vehicles passing over speed bumps. Speed bumps cause vehicles to compress, and this compression could be used to power generators through mechanisms that convert the reciprocating motion into rotational motion. The generated electricity could power street lights, helping to address Pakistan's increasing energy demand and gap between energy production and consumption. Key advantages include using an untapped renewable resource, requiring minimal space and maintenance, and producing pollution-free power. Calculations estimate a single speed bump could generate over 10kW of electricity over 24 hours from passing vehicles.
power generation through speed breaker
1. The document describes a student project to generate electricity using the speed breaker phenomenon.
2. It aims to help address Pakistan's energy crisis by providing a low-cost way to produce electricity through non-conventional means.
3. The project uses a rack and pinion gear mechanism attached to speed breakers to convert the kinetic energy of vehicles into electrical energy via an alternator.
foot step power generation
The document proposes a method to generate electricity from human footfall called the Power Producing Platform. It consists of mechanical setups under a flooring system that compress to turn dynamos when people walk over it. The electricity generated can be stored in batteries and used to power local needs. It suggests installing these in highly populated areas like railway stations where large crowds can generate significant power through their daily movement.
eco friendly power generation through Speed breaker using water pressure
Eco friendly power generation using spring coil mechanism .
Here , power is generated using hydro electric power generation principle by spring and piston arrangement. by this we get new idea for generation of power at low price.
Footstep Power Generation
The document summarizes a seminar on footstep power generation. It describes how the up and down motion of footsteps on pressure plates can be used to generate electricity. The basic principle is that when a pedestrian steps on a plate, it dips down and rotates a shaft connected to a generator to produce electrical energy. The system has applications in places with heavy foot traffic like train stations, airports, and parking lots. It provides a renewable source of energy without pollution and can power lights, fans and other small devices. While initial costs are high, it efficiently captures wasted kinetic energy from walking.
Renewable Sources of Energy- Dynamo in Bicycle
How can we use a renewable Energy Source to ride a bicycle which can emit light in the night and that too, without no money spent?
This Presentation depicts the production of electricity by simply paddling your bicycle.
Of course it is a little expensive, but surely it is better than the battery system...
You can apply it too in your bicycle!
To know more, download the Powerpoint Presentation.
Report speed breaker
This document provides a project report on generating electricity from speed breakers and windmills. It includes sections on fabrication details, main parts of the system like the wooden ramp, metal roller, chain and sprocket mechanism, freewheel mechanism, pulley and belt, dynamo, and windmill. The project aims to utilize the energy lost by vehicles passing over speed breakers to generate electricity, which can then be stored in batteries. Testing results showed an efficiency of 0.4-0.5% for energy captured from speed breakers.
E-bike ppt
This document summarizes a student project to design an electric bicycle using CATIA software and 3D printing. It introduces electric bicycles and their advantages over traditional bicycles. The document then provides an overview of CATIA, a 3D CAD software, describing its key capabilities and user interface. It explains how CATIA can be used to create 3D part and assembly models, apply constraints between parts, and integrate design with other applications like finite element analysis. The project aims to leverage CATIA to design an electric bicycle and 3D printing to prototype the design.
Distributed generation by speed braker at bridge
This document proposes a system to generate electricity from the kinetic energy of vehicles passing over speed bumps on bridges. The system would use a special speed bump arrangement connected to a pump and hydroelectric plant. As vehicles pass over the bumps, the up and down motion would power the pump. The high-pressure water from the pump would turn a turbine connected to a generator, producing electricity. This renewable distributed generation could power local streetlights and areas and excess power could be added to the electric grid. It aims to make productive use of wasted kinetic energy and provide off-grid power solutions.
GENERATION OF ELECTRICITY THROUGH SPEED BREAKER
This document describes a project to generate electricity from speed breakers on roads. As vehicles pass over speed breakers, kinetic energy is wasted through heat and friction. This project aims to convert that wasted energy into electrical energy. It proposes installing movable speed breakers connected to a rack and pinion mechanism to convert vertical motion into rotational motion. This rotation would generate electricity using standard generators. The document outlines the working principle, components, advantages, and scope of the project. It aims to provide a sustainable energy source by tapping into kinetic energy from traffic on busy roads.
Time Blind Wk1
Pedal Power is a project that allows people to charge their mobile phones by pedaling a bike connected to a generator. The first installation will be located in Astor Place in New York City, providing a way for people to engage with energy production and learn how easy it is to generate power through physical activity. The goal is to educate people about energy consumption and empower them to make small changes through an interactive experience that is fun and helps others.
BICYCLE GENERATOR
The document describes a student project to create a miniature hydroelectric power plant using scrap materials from a junkyard. The project aims to generate electricity using a water turbine connected to an old coconut grater motor modified to be an AC generator. Students tested the turbine's ability to induce current in the generator and measured an average voltage of 2.15V. Testing also found the average velocity of water powering the turbine to be 0.47m/s, allowing calculations of volumetric flow rate and estimated power output of 0.000855476 watts.
More Related Content
What's hot
Pgfs document
The document describes a project to generate electricity from speed breakers. It proposes using the kinetic energy of vehicles passing over speed breakers to power lights along roads. A mechanism is designed to convert the up-and-down motion of a speed breaker into rotational motion using a rack and pinion gear system. This rotation is amplified through a sprocket and chain assembly connected to a flywheel and generator to produce electricity that can be stored in a battery and used for lights. The document discusses the working principle, materials used, specifications and equipment required to implement the system.
48-52,Tesma402,IJEAST.pdf
This document describes a proposed design for a footstep power generation system using rack and pinion gears. The system would convert the kinetic energy from human footsteps into electrical energy. It proposes using racks attached to moving plates underneath a walking surface. Rack and pinion gears would convert the vertical motion of footfalls into rotational motion. This would turn a flywheel and dynamo to generate electricity. The document outlines the components, design calculations, and estimates the system could generate 10.925 kW of power per hour based on simulations. It suggests such systems could be useful for power generation at locations with many pedestrians like train stations or malls.
IRJET- Foot Step Power Generation
This document describes a system that generates electricity from the kinetic energy of human footsteps. The system uses a rack and pinion mechanism to convert the vertical motion of footsteps into rotational motion. Gears, chains, and sprockets transfer this rotational motion to power a dynamo, which generates electricity. The electricity is stored in a battery. The system aims to harvest energy from places with high foot traffic to generate useful power and reduce dependency on conventional energy sources. It provides a clean, renewable method of small-scale power generation using wasted kinetic energy from human movement.
Power Generation with StairCase
The document presents a proposal for generating power from footsteps on staircases using piezoelectric transducers. The system would convert the mechanical energy from footfalls on instrumented stair treads into electrical energy to power small loads like LED lights. It proposes installing the systems in locations with high foot traffic like train stations, airports, universities and stadiums to take advantage of renewable energy from human movement.
Electrical by speed braker
This document proposes generating electricity from speed breakers. It suggests using the kinetic energy of vehicles passing over speed bumps to power generators via various mechanisms. Specifically, it describes using a rack and pinion mechanism to convert a vehicle's downward force into rotational motion to turn a generator. Challenges in constructing a prototype generator are discussed. While the initial output was low, the document argues this demonstrates the viability of the concept for producing electricity from speed breakers, with potential for increased output through optimization.
Presentation shivam e bike
This is all about design and fabrication of E-bike. I hope this is helpful for all engineering student.
Smart cycle presentation
The document describes a solar-powered electric bicycle called the Smart Cycle. It has the following key features:
- It is powered by a battery that is charged by solar panels as well as a dynamo for backup charging.
- It can travel up to 15-20 mph using a permanent magnet DC motor powered by the battery.
- CAD drawings were created to design the frame and show placements of the solar panels, battery, and other components.
- The battery is a 12V 10AH lead-acid type for its life and efficiency. The motor is a 400W 24V PMDC motor for its starting torque.
SOLAR POWERED BICYCLE
This document describes a solar powered bicycle. It includes sections on the objectives of creating a solar powered bicycle, the methodology used including assembling the components and connecting them, issues that arose and their solutions, and future aspects and advantages. The key components are a 500W DC motor, solar panels that charge lead acid batteries, and a chain drive system to connect the motor to the rear wheel. The goals are to power the bicycle using solar energy to reduce human effort for transportation over short distances.
POWER GENERATION BY SPEED BREAKER
While moving, the vehicles possess some kinetic energy and it is being wasted. This kinetic energy can be utilized to produce power by using a special arrangement called POWER HUMP (SPEED BREAKER
Power generation from speed
This document describes a project to generate electricity from speed breakers using the kinetic energy of passing vehicles. It discusses using a rack and pinion mechanism to convert the up and down motion of the speed breaker into rotational motion that can power a generator. The objectives are to produce electricity at very low cost and address power shortages. Advantages include pollution-free power, simple design, and not requiring manual labor. Future work could optimize the design for heavier vehicles to increase output. The conclusion states this is a step towards exploring non-conventional energy sources as conventional fuels deplete.
P.generation from speed breaker
Generation of Electricity from Speed-Breakers
The document proposes a method to generate electricity from the potential energy of vehicles passing over speed bumps. Speed bumps cause vehicles to compress, and this compression could be used to power generators through mechanisms that convert the reciprocating motion into rotational motion. The generated electricity could power street lights, helping to address Pakistan's increasing energy demand and gap between energy production and consumption. Key advantages include using an untapped renewable resource, requiring minimal space and maintenance, and producing pollution-free power. Calculations estimate a single speed bump could generate over 10kW of electricity over 24 hours from passing vehicles.
power generation through speed breaker
1. The document describes a student project to generate electricity using the speed breaker phenomenon.
2. It aims to help address Pakistan's energy crisis by providing a low-cost way to produce electricity through non-conventional means.
3. The project uses a rack and pinion gear mechanism attached to speed breakers to convert the kinetic energy of vehicles into electrical energy via an alternator.
foot step power generation
The document proposes a method to generate electricity from human footfall called the Power Producing Platform. It consists of mechanical setups under a flooring system that compress to turn dynamos when people walk over it. The electricity generated can be stored in batteries and used to power local needs. It suggests installing these in highly populated areas like railway stations where large crowds can generate significant power through their daily movement.
eco friendly power generation through Speed breaker using water pressure
Eco friendly power generation using spring coil mechanism .
Here , power is generated using hydro electric power generation principle by spring and piston arrangement. by this we get new idea for generation of power at low price.
Footstep Power Generation
The document summarizes a seminar on footstep power generation. It describes how the up and down motion of footsteps on pressure plates can be used to generate electricity. The basic principle is that when a pedestrian steps on a plate, it dips down and rotates a shaft connected to a generator to produce electrical energy. The system has applications in places with heavy foot traffic like train stations, airports, and parking lots. It provides a renewable source of energy without pollution and can power lights, fans and other small devices. While initial costs are high, it efficiently captures wasted kinetic energy from walking.
Renewable Sources of Energy- Dynamo in Bicycle
How can we use a renewable Energy Source to ride a bicycle which can emit light in the night and that too, without no money spent?
This Presentation depicts the production of electricity by simply paddling your bicycle.
Of course it is a little expensive, but surely it is better than the battery system...
You can apply it too in your bicycle!
To know more, download the Powerpoint Presentation.
Report speed breaker
This document provides a project report on generating electricity from speed breakers and windmills. It includes sections on fabrication details, main parts of the system like the wooden ramp, metal roller, chain and sprocket mechanism, freewheel mechanism, pulley and belt, dynamo, and windmill. The project aims to utilize the energy lost by vehicles passing over speed breakers to generate electricity, which can then be stored in batteries. Testing results showed an efficiency of 0.4-0.5% for energy captured from speed breakers.
E-bike ppt
This document summarizes a student project to design an electric bicycle using CATIA software and 3D printing. It introduces electric bicycles and their advantages over traditional bicycles. The document then provides an overview of CATIA, a 3D CAD software, describing its key capabilities and user interface. It explains how CATIA can be used to create 3D part and assembly models, apply constraints between parts, and integrate design with other applications like finite element analysis. The project aims to leverage CATIA to design an electric bicycle and 3D printing to prototype the design.
Distributed generation by speed braker at bridge
This document proposes a system to generate electricity from the kinetic energy of vehicles passing over speed bumps on bridges. The system would use a special speed bump arrangement connected to a pump and hydroelectric plant. As vehicles pass over the bumps, the up and down motion would power the pump. The high-pressure water from the pump would turn a turbine connected to a generator, producing electricity. This renewable distributed generation could power local streetlights and areas and excess power could be added to the electric grid. It aims to make productive use of wasted kinetic energy and provide off-grid power solutions.
GENERATION OF ELECTRICITY THROUGH SPEED BREAKER
This document describes a project to generate electricity from speed breakers on roads. As vehicles pass over speed breakers, kinetic energy is wasted through heat and friction. This project aims to convert that wasted energy into electrical energy. It proposes installing movable speed breakers connected to a rack and pinion mechanism to convert vertical motion into rotational motion. This rotation would generate electricity using standard generators. The document outlines the working principle, components, advantages, and scope of the project. It aims to provide a sustainable energy source by tapping into kinetic energy from traffic on busy roads.
What's hot (20)
eco friendly power generation through Speed breaker using water pressure
eco friendly power generation through Speed breaker using water pressure
Viewers also liked
Time Blind Wk1
Pedal Power is a project that allows people to charge their mobile phones by pedaling a bike connected to a generator. The first installation will be located in Astor Place in New York City, providing a way for people to engage with energy production and learn how easy it is to generate power through physical activity. The goal is to educate people about energy consumption and empower them to make small changes through an interactive experience that is fun and helps others.
BICYCLE GENERATOR
The document describes a student project to create a miniature hydroelectric power plant using scrap materials from a junkyard. The project aims to generate electricity using a water turbine connected to an old coconut grater motor modified to be an AC generator. Students tested the turbine's ability to induce current in the generator and measured an average voltage of 2.15V. Testing also found the average velocity of water powering the turbine to be 0.47m/s, allowing calculations of volumetric flow rate and estimated power output of 0.000855476 watts.
Pedal power
Pedal power is a form of human-generated electricity that uses a stationary or exercise bike to convert the mechanical energy from pedaling into electrical energy through a generator. The key components needed for pedal power include a bike, a flywheel to store rotational energy, belts and pulleys to transfer energy to the generator, a generator to produce electricity, and devices like diodes, fuses, batteries, and inverters to regulate and store the electrical output. More information on setting up pedal power systems can be found on various websites like Appropedia.org.
Pedal power hacksaw
its actually a mechanics themed project which helps humans use a mechanized hacksaw instead traditional handheld saw.
Pedal Powered Water Pump
The document describes a major project submitted by six students to their lecturer on a pedal powered water pump. It includes a title page, declarations by the students and lecturer, acknowledgements, and a table of contents outlining what will be covered in the project report. Some of the key components to be discussed include the hand pump, pedal arrangement, rod, ball valve, pipe fittings and pressure gauges. The overall aim of the project is to design and build a water pump that can be operated by pedal power.
Quadcopter
A basic overview on Quad copter - About - Raw Material Required - Working Principle - Motor rotation - Applications
Viewers also liked (6)
Similar to Pedal power pres
project TRIKE
TRIKE is a 3 wheel hybrid vehicle , which has two wheels at the front and drive train to the back wheel ,which is accomodated with the hub motor and the same wheel is linked to the IC engine through the chain drive .
The vehicle can either run through electricity or IC engine and with the combination of both .
darshan -project
This document discusses the design and workings of a hybrid trike. It begins by defining a hybrid vehicle as one that uses two or more distinct power sources. It then provides a brief history of hybrid bicycles and vehicles. The main sections discuss the different types of hybrid trike configurations, specifically the tadpole design with two front wheels and one rear wheel. It describes how the hybrid trike works using both an internal combustion engine and electric motor/generator. The electric motor provides power assistance and the engine can recharge the batteries through regenerative braking.
IRJET - Design and Fabrication of an Electric Bike
This document describes the design and fabrication of an electric bike. Some key points:
- The electric bike is powered by a lithium-ion battery which provides voltage to a DC motor. This allows the bike to run on electric energy as the primary source.
- It has several benefits over conventional vehicles like better fuel economy, lower emissions and less noise pollution.
- The main components are the battery, DC motor, controller, chain drive and throttle. The battery powers the motor through the controller. The motor turns the rear wheel through the chain drive.
- Speed and power can be varied through the controller and throttle similarly to a gas-powered motorcycle.
- Calculations are shown to select
IRJET- An Overview of Electric Vehicle Concept and its Evolution
This document provides an overview of electric vehicles, including their evolution and types. It discusses the basic working principle of electric vehicles and how they are powered by batteries or fuel cells rather than gasoline engines. The document outlines the main types of electric vehicles, including plug-in hybrids, battery-powered vehicles, and fuel cell vehicles. It also briefly describes the early history of electric vehicles from the 1800s to modern times, highlighting key innovations and factors that affected their adoption such as limited range and performance compared to gasoline vehicles.
E- Vehicle technology.pptx
This document provides an overview of electric vehicles (EVs). It begins with an introduction to EVs, then discusses their history. It describes the reasons for developing EVs, including pollution control and limited fossil fuel reserves. The major sections explain what EVs are, how they work, their main components and functions, types of EVs including battery electric vehicles and plug-in hybrids, and the advantages of EVs like lower costs and reduced emissions. The conclusion expresses hope that technological and policy advances will help transition to more EVs.
Electric Hybride vehicles.ppt
This document discusses different types of hybrid electric vehicles. It begins by defining a hybrid car as having two or more propulsion sources, most commonly gasoline and electric motors. The gasoline engine in hybrids is smaller and more efficient. There are several variations of hybrid configurations including mild, series, parallel, and series/parallel. Mild hybrids use electric motors only for assistance and cannot drive solely on electric. Series hybrids have the engine power an electric generator to charge the battery and power the electric motor driving the wheels. Parallel hybrids can use the engine or motor independently or together to power the wheels. Series/parallel hybrids combine both series and parallel systems to maximize efficiency and performance. The document provides diagrams to illustrate the different
IRJET- Modeling of PV based Bidirectional Battery Charger for Electric Ve...
This document discusses modeling a photovoltaic (PV) based bidirectional battery charger system for electric vehicles. It begins with an introduction to electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles. It then discusses the topology and components of a typical plug-in electric vehicle charger, including a bidirectional DC/DC converter and AC/DC converter with controllers. Simulation results are presented showing the power flow between the PV panels, grid, and battery. The document concludes that power electronics can enable electric vehicles to charge from the grid or send power back, and that standards must be followed for vehicle-to-grid applications.
Km62 solar powered ebike (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
Project on multi utility hydrid vehicle (1)
A hybrid electric vehicle (HEV) has two types of energy storage units, electricity and fuel. Electricity means that a battery (sometimes assisted by ultracaps) is used to store the energy, and that an electromotor (from now on called motor) will be used as traction motor. Fuel means that a tank is required, and that an Internal Combustion Engine (ICE, from now on called engine) is used to generate mechanical power, or that a fuel cell will be used to convert fuel to electrical energy. In the latter case, traction will be performed by the electromotor only. In the first case, the vehicle will have both an engine and a motor.
Depending on the drive train structure (how motor and engine are connected), we can distinguish between parallel, series or combined HEVs.
Depending on the share of the electromotor to the traction power, we can distinguish between mild or micro hybrid (start-stop systems), power assist hybrid, full hybrid and plug-in hybrid.
Depending on the nature of the non-electric energy source, we can distinguish between combustion (ICE), fuel cell, hydraulic or pneumatic power, and human power. In the first case, the ICE is a spark ignition engines (gasoline) or compression ignition direct injection (diesel) engine. In the first two cases, the energy conversion unit may be powered by gasoline, methanol, compressed natural gas, hydrogen, or other alternative fuels.
energies-16-00160.pdf
This document reviews electric bike motor drive configurations and capabilities. It begins with an introduction to electric bikes and their increasing popularity as an environmentally friendly transportation option. It then discusses the two main e-bike system typologies - pedal assist and power on demand. The most common parallel configuration and less common series configuration are described. The document reviews mechanical design considerations like motor placement and gearing. It also discusses electrical components like lithium-ion batteries and motor control strategies. The focus is on permanent magnet synchronous motors as suitable electric bike traction motors. Simulation and experimental results are presented for a common motor model to highlight performance capabilities.
IRJET-Smart Self Charging Batteries in Electric Vehicle
The document describes a proposed design for an electric vehicle with a self-charging battery system. The vehicle uses a DC generator connected to the rear wheel to convert rotational energy into electrical energy for charging the onboard batteries. A buck-boost converter regulates the voltage from the generator and solar panels mounted on the vehicle to appropriately charge the batteries. This system allows the vehicle to recharge its batteries through regenerative braking and solar power, making it more efficient and environmentally friendly than gas-powered vehicles.
REPORT OF TRICYCLE (1).docx
The document discusses solar-powered vehicles and their history. It notes that solar-powered vehicles use photovoltaic cells to convert sunlight into electricity, which powers an electric motor or charges batteries. Since the 1970s, inventors have helped develop solar-powered cars, boats, airplanes and more. The first fully solar-powered car was built in 1977. Experimental solar vehicles have been made with support from major automakers. The document then discusses developing a solar-powered tricycle for students to use on a large college campus. It notes the weaknesses of different tricycle types and how a solar-powered design could help overcome those weaknesses.
Hybrid Electric Vehicle Powertrain
A brief Seminar Presentation on the Hybrid Electric Vehicle (HEV) Powertrain Components, Architecture and Modes of Hybridisation. Also includes the Classification of HEV on the basis of Energy Flow.
REPORT PEDAL OPERATED BATTERY CHARGER.docx
This document discusses the history and development of human-powered generators. It begins by explaining how flywheels can store energy from human power sources like pedaling. Early experiments in the late 19th century found that cyclists could produce around 75W of power over an hour. Developments continued through the 20th century, with improvements made to recumbent bicycles and hand-cranked generators. Recent research has focused on retrofitting exercise machines at gyms to convert human power into electricity for lighting and other uses. The goal is to develop sustainable energy solutions, especially for rural areas without reliable power sources.
Electric Vehicle ppt
Presentation on Electric Vehicle By Vivek Atalkar.
An electric vehicle, or EV, is a type of vehicle that uses electricity as its main source of power instead of traditional fuels like gasoline or diesel. EVs are powered by electric motors that run on rechargeable batteries, which can be charged by plugging the vehicle into an electrical outlet or charging station.
There are two types of electric vehicles: battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs). BEVs are fully electric vehicles that run entirely on battery power and have no backup gasoline engine. PHEVs have both an electric motor and a gasoline engine, and can run on either electricity or gasoline.
Electric vehicles offer several benefits over traditional gasoline-powered vehicles. They produce zero tailpipe emissions, which means they don't contribute to air pollution. They also tend to be more energy-efficient and cost less to operate over the long-term. Additionally, electric vehicles are generally quieter and provide smoother acceleration compared to gasoline-powered vehicles.
One of the main challenges of electric vehicles is their limited range compared to gasoline-powered vehicles, although this is improving as battery technology advances. Another challenge is the availability of charging infrastructure, which is still developing in many parts of the world.
Overall, electric vehicles are an important part of the transition to a more sustainable and environmentally-friendly transportation system.
Module 1: Electric vehicle Technology for VTU - by Dr. C V Mohan
This document provides an introduction to electric and hybrid electric vehicles. It discusses the types of electric vehicles including battery electric vehicles, hybrid electric vehicles, plug-in hybrid electric vehicles, and fuel cell electric vehicles. Examples of popular electric vehicles are also presented such as the Tesla Roadster, Toyota Prius, Chevrolet Volt, and Mitsubishi i-MiEV. The document then discusses electric vehicle configurations and components including electric drive systems, traction motors, and transmission requirements. Vehicle performance metrics like maximum speed, gradeability, and acceleration are also examined. Finally, the document covers topics like normal driving tractive effort using common drive cycles and energy consumption calculations.
SOLAR CAR PPT
This document summarizes a project seminar on a solar-powered go-kart presented by three students. The solar go-kart uses a 48V battery pack, 48V 50Amp controller, and 250W solar panel. It has a chassis made of iron pipe, a 48V 650W BLDC motor, and a 48V 50Amp controller to control the motor speed. The go-kart's battery is charged by the solar panel and it can run at speeds of 20-25km/h. Advantages of the solar go-kart include being noiseless, economical, reliable, eco-friendly, having a maximum life, and requiring less maintenance than other options.
Regenerative breaking system
Regenerative braking systems in hybrid and electric vehicles capture kinetic energy lost during braking and convert it to electrical energy that is stored in a battery. This captured energy can then be used to help power the vehicle. Specifically, regenerative braking uses the electric motor as a generator during braking so that the motor's output recharges the battery rather than dissipating the energy as heat. By recapturing this lost kinetic energy, regenerative braking improves fuel efficiency in hybrids and extends the range of electric vehicles.
IRJET- Study, Development & Modifications of Series Hybrid Electro-Petrol...
This document describes modifications made to a Series Hybrid Electro-Petroleum Bicycle (SHEPB) to address issues with electricity availability in India. The standard SHEPB is an electric bicycle that requires plugging in to charge its battery. The modified design adds a small engine and alternator so that human pedaling can start the engine to charge the battery, allowing the vehicle to operate without a power source. It works by converting human power to mechanical power from the engine and alternator, storing it as electrical energy in the battery. The stored energy then powers an electric motor to drive the vehicle. The modifications aim to create a more versatile hybrid electric bicycle suitable for use throughout India that obtains charging power from both electricity and human effort.
Similar to Pedal power pres (20)
IRJET - Design and Fabrication of an Electric Bike
IRJET - Design and Fabrication of an Electric Bike
IRJET- An Overview of Electric Vehicle Concept and its Evolution
IRJET- An Overview of Electric Vehicle Concept and its Evolution
IRJET- Modeling of PV based Bidirectional Battery Charger for Electric Ve...
IRJET- Modeling of PV based Bidirectional Battery Charger for Electric Ve...
IRJET-Smart Self Charging Batteries in Electric Vehicle
IRJET-Smart Self Charging Batteries in Electric Vehicle
Module 1: Electric vehicle Technology for VTU - by Dr. C V Mohan
Module 1: Electric vehicle Technology for VTU - by Dr. C V Mohan
IRJET- Study, Development & Modifications of Series Hybrid Electro-Petrol...
IRJET- Study, Development & Modifications of Series Hybrid Electro-Petrol...
Recently uploaded
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdRecently uploaded (20)
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Pedal power pres
- 1. Pedal Power MEOW By Beau and Jeff Engineering 308
- 2. The MEOW (Mobile Energy Operations Wagon) is a mobile trailer which has six solar panels and is able to carry 4 pedal power bikes within.
- 3. The bikes were originally built in 2002 to help provide electricity to small concerts or events. They were created to generate electricity for the batteries in the MEOW if they were depleted.
- 4. Pedal Power project was first used at an anti-war protest and shown at a renewable energy fair.
- 5. Pedal Power
- 6. A single bike can generate 28 volts if pedaled at a medium pace. At least 48 volts is required to charge the battery on the MEOW, so a step-up converter enabled the bikes to produce over 50 volts. It should not exceed a total of 54 volts with the existing battery system. The converter allows you to adjust the voltage, which is set to 52.5.
- 8. Generator
- 9. Charge Control and Meter Unit
- 10. Inside MEOW
- 11. Inverter
- 12. The MEOW was stolen in 2010 and was recovered in Hoopa. It was stripped of all solar panels and other expensive equipment. In spring 2013, the MEOW has been restored from donations in the community. Two of the four remaining bikes have been restored as well. There are plans to eventually attach MEOW to CCAT in order to supplement energy independence