Vipin Joy has over 8 years of experience as an instrumentation engineer and quality inspector. He currently works for L&T in Saudi Arabia on the SADARA project as a QA/QC instrumentation engineer. Prior to this, he held similar roles for Hyundai Engineering and Al Adwani Construction Company in Saudi Arabia. He has extensive experience in quality control procedures, inspection reporting, and ensuring instrumentation installations meet standards. Vipin holds a Bachelor's degree in Instrumentation and Control Engineering and is proficient in instrumentation software, documentation, and safety compliance.

1. VIPIN JOY
vipinjoy@gmail.com
+91976633563
Profession : Instrumentation Engineer
Experience:8 + years
Instrumentation Enginner /Quality Inspector with 8+ years of industrial experience in
Instrumentation & Control Engineering which include Field engineering, Quality Assurance
Quality Control, Detailed Engineering designs & Pre-commissioning /commissioning.
Skills:
Good interpersonal & presentation skills, Self starter and Strong team player.
Results-oriented with a good work ethic, ability to communicate at all levels of the business
and with a variety of cultures.Business focused customer and service minded. Capable to
works under any kinds of pressurised circumstances. Effective HSE implement & high level
maintain.
Current Employer :LARSON &TUBRO(L&T) - SAUDI ARABIA
Project :SADARA(PE)- SAUDI ARABIA
Position :QA/QC- Instrumentation
Reporting Authority : Quality Manager
Work period :August 2014 to July 2015
Job Responsibilities
 Responsible for the execution of all instrumentation inspection prior to
acceptance of the client.
 Implementing the quality control procedures and instrument test plan
(QCP/ITP) as per the SADARA standared
 Preparation of individual instrumentation Inspection Report ( I.R. ) such as
primary and secondary instrument cable tray installation, primary and secondary
cable insulation and continuity test, primary and secondary cable pulling,
glanding and termination from instrument to field junction box and from junction
box to process interface building ( PIB ) continuity test and open and close loop
checking. Instrument , impulse tubing, instrument air , analyzer, gas detector, ,
and all vendor installation. As per P&ID and ILD.
 Rectify the punch list items, which issued by operation and client
 Preparation and reviewing of Dossior for each sub system
 Responsible to verify the installation of the instruments by performing
inspections as per the Inspection and Test Plan (ITP) and record the findings on
the Quality Record (QR).
 Tasks to monitor all site activities of instrumentation work
 Tracking and recording of ‘Request for Inspections’ (RFI’s) and work progress
on site, Responsible for the clearance of Mechanical Completion Check
Records (MCCR)
 Handle all quality control& perform all inspection duties as required by
the project specifications relating to Electrical and Instrumentation field.

2. This document is electronically transmitted and does not contain any signature 2
 Perform regular inspections at site for quality assurance.
 Review Project drawings and apply Contract Codes, Standards, and
Specification.
 Review and approve ITP, Loop Check procedure, Instrument work procedures,
method statements etc.
 Review and approve all engineering documents for site modifications as per
requirement
 Witness Material receiving inspection’s at ware house.
 Witness Calibration of flow, level, pressure, temperature transmitter, control
valves, and indicating instruments.
 Perform surveillance inspections for the work defined in the instrument discipline.
Carry out Planned Inspections, Surveillance Inspections and release hold points,
witness entire instrumentation inspection at site.
 Witnessing the inspections such as installation of cable trays, instruments,
process tubing’s etc.
 Responsible for evaluating all Non-Conformities reported within the group,
ensuring their correct specification and the effectiveness of corrective and
preventive action implemented.
 Planning and monitoring the preparation of Punch List, follow-up / completion of
punch items.
Previous Employer 1 :HYUNDAI ENGINEERING - SAUDI ARABIA
Project :JPP, SAUDI ARABIA
Position :QA/QC- Instrumentation
Reporting Authority : Manager
Work period :December 2013 to July 2014
Job Responsibilities
 Responsible for the execution of all instrumentation inspection prior to acceptance of
the client.
 Implementing the quality control procedures and instrument test plan (QCP/ITP) as
per the site work instruction (SWI) required.
 Rectify the punch list items, which issued by operation and client
 Preparation and modification of Instrument drawings, data sheets, I/O wiring
diagrams, P&IDs, specifications
 Responsible to verify the installation of the instruments by performing inspections as
per the Inspection and Test Plan (ITP) and record the findings on the Quality Record
(QR).
 Tasks to monitor all site activities of instrumentation work
 Tracking and recording of ‘Request for Inspections’ (RFI’s) and work progress on
site,
 Preparation of Internal Wiring Diagram and Instrument Loop Diagram

3. This document is electronically transmitted and does not contain any signature 3
Previous Employer 2 : AL ADWANI CONT. CO LTD SAUDI ARABIA
Project : SAMSUNG Co AA Project, THASNEE, SAUDI ARABIA
Position : Instrumentatiom Engineer
Work period : May 2012 to August 2013
References : Mr.Shaheer (Manager 054 192 3144)
Job Responsibilities
 Preparation of Bill of Material (BOM).
 Witnessing the overall instrumentation work during the plant construction Checking
data sheet, P&ID, Hook up drawing etc
 Instrument visual inspection, documentation and package preparation
 Trouble shooting of loops, instruments & control valves by using communicator and
other calibrators.
 Preparation of Calibration certificate and instrument loop check record Inspection of
new materials from warehouse.
 Failure analysis and prepare the reports of instruments and control valves.
 Installation of all kind of instruments such a Flow, Level, Pressure, Temperature
transmitters. Loop checking between instrument and DCS.
 Calibration of instruments as per field parameters using HART communicator, Micro
calibrator, Temperature & Pressure calibrator and Simulator.
 Verification of instruments and valves, the way which mounted on pipe as per P&ID
flow direction, proper process connection etc..
Previous Employer 3 : THALES- (SAUDI ARABIA)
Project : SADA PROJECT (SAUDI ARAMCO)
Position : Design Engineer/QC Inspector, Instrumentation.
Reporting Authority : QC Manager
Work period : October 2010 to Feb 2012
Job Responsibilities
 Responsible for the execution of all instrumentation inspection prior to acceptance of
the client.
 Provides technical direction and on-the-job training to Drafters, Designers, and less
experienced Engineers
 Plan, schedule, conduct, and coordinate program of assigned engineering work and
projects
 Preparing Electrical & Pneumatic Hook up diagrams, Electrical wiring diagram, loop
diagrams Junction Box Grouping
 Deals with preparing and reviewing of all ITP's / Material Approval prior for project
plan preparation

4. This document is electronically transmitted and does not contain any signature 4
 Coordinating with Construction Engineer’s for project plan drawing review with
reference to Saudi Aramco Standards
 Inspect material and equipment as applicable to ensure compliance with Saudi
Aramco for proper handling storage and protection at Saudi Aramco facilities and/or
construction sites.
 Monitor subcontractor’s quality systems, records and quality personnel for
compliance with requirements.Review and evaluate subcontractor’s quality document
submittals.
 Witnessing the overall instrumentation work during the plant construction
 Review of data sheet, P&ID, Hook up drawing etc
 Rectify the punch list items, which issued by operation and client
 Tasks to monitor all site activities of instrumentation work
 Preparation of cable schedule&Cable Tray Routing drawing
 Preparation of JB schedule, drum schedule
Previous Employer 4 :CHEMANOL (SFFCL) -KSA (SAUDI ARABIA)
Project :MCAF&MA-DMF (L&T-INDIA)
Position :Instrumentation Engineer (PMC).
Reporting Authority : Section Manager
Work period : December 2007 to Aug 2010
Job Responsibilities
 Monitor all site engineering activities according to project specifications and site
requirement.
 Review and approve all material required for site construction.
 Involved with the Material expediter for the arrival of the material to site.
 Involved in purchase of material for the shortage items as per the BOM.
 Modify drawings, termination schedules, typical installation diagrams as per
requirements and field condition.
 Involved in SAT completion and SAT related Punch Closing.
 Responsible for all systems SAT completion certifications.
 Monitor all site engineering activities according to project specifications and site
requirement..
 Coordinate with Commissioning team and vendors for any engineering related issues
and resolving it.
 Involved in cabinet modifications related to cross wiring and I/O allocations.
 Involved on communication for 3rd
party PLC with DCS and Modbus mapping.
 Worked on Redlining P&ID as per PCS requirements.
 Assist in the interface between electrical and control system
 Review all loop folders prior to loop check for proper documentation.
 Involve in loop test for various instruments, valves, analyzers and vibration
transmitters.
 Coordinate and involve with the process control team for the clearance of loop
checks and function test.
 Support troubleshooting activities for field instrument side.
 Verifying all the punch lists of Construction,

5. This document is electronically transmitted and does not contain any signature 5
Previous Employer 5 : Jubail Chemical Industries.(Jana)- KSA
Project : Jana 60-K-Phese II
Position : Instrumentation engineer
Reporting Authority : Construction Manager
Work period : Feb 2007 to Nov 2007
Job Responsibilities
 Calibration, Installation and Commissioning of all kinds of Instruments such as Flow,
Level, Pressure and Temperature transmitters, Switches, RTD & Thermocouple.
 Loop checking between instruments and DCS.
 Function test, logic test and pre- commissioning of various systems.
 Preparation of Calibration certificate and instrument loop check record.
 Calibration of instruments as per field parameters using HART communicator.
 Calibration and repair of control valves, ON/ OFF valves including, Pneumatic and
Electro-pneumatic positioner.
 Checking of new instrument with HART protocol
 Instrument inspection after installation
 Inspection of air supply tubing installation and leak test Cable termination inspection,
continuity and resistance test.
 Instrument field test inspection, function and calibration.
 Maintain CM (Condition Monitoring) and PM (Preventive Maintenance) of control
valves and instruments checklist and records for instrument history.
 Inspection of new materials
Educational Chronicle
1. Bachelor of technology (B Tech) in Instrumentation and Control Engineering,
SNMIMT Maliankara Eranamkulam, Under Mahatma Gandhi University Kerala India
During the year,2002-2006.
Engineering Documentation
 Instrument drawing like index,datasheet,I/O wiring diagrams,cable schedule &Cable
tray routing drawing,Hook ups ete.
 Inspection and Test Plan (ITP), Method statements (MS) for FAT, SAT, Testing and
Commissioning defect notification (CDN) and final hand over documentation.
 Permit to work (PTW) procedures, risk assessments and NOC from local authorities.
 Client co ordination and progress analysis & review meetings MOM (minutes of
meeting)
Weekly, biweekly and monthly.
HSE Compliance for Site activities
 Active member in contribution to review and develop good management principles,
procedure and work culture and strict maintain.

6. This document is electronically transmitted and does not contain any signature 6
 Good knowledge of OSHA requirements of principles, concepts and risk assessments.
 Highly analytical thinking with demonstrated talent for identifying, scrutinizing,
improving and streaming of complex work process.
 HAZOP study for power generation plants – hypothetical division of a plant into zones
where risk may arise. An area classification established in this way permits the proper
selection of apparatus, tools, procedure and instruments for use in such hazardous
areas.
SOFTWARE SKILLS:
1. INTools 7.0
2. MS Office
Personal Details
Name : Vipin V Joy
Gender : Male
Date of Birth : 10-05-1984
Passport No : M7313613
Marital Status : Married
Languages Known : English, Hindi, Malayalam and Tamil
Declaration
The information’s in this document are true to the best of my knowledge.
Vipin V Joy