Radiations classified as ionizing and non-ionizing radiations. ionizing includes ultraviolet, alpha, gamma and x-ray radiations. non-ionizing consists of infrared, microwave, radio wave and power line electromagnetic radiations
Lesson 4 Ionizing Radiation | The Harnessed Atom (2016)ORAU
The document provides information about different types of radiation, including ionizing and non-ionizing radiation. It discusses radioactive decay and half-life. It also addresses natural and human-made sources of radiation exposure and averages about 6 mSv of annual exposure for Americans. Radiation can potentially cause cell damage but low levels are generally harmless due to body's ability to repair itself.
The document discusses sources, effects, and protection from radiation. It describes natural sources like cosmic rays, terrestrial radiation from elements in the ground, and atmospheric radiation. Man-made sources include X-rays from medical procedures and radioactive fallout from nuclear explosions. Exposure to high doses of radiation can cause acute radiation syndrome and organ damage, while long-term low doses may increase cancer risks. Protection methods include limiting unnecessary medical X-rays, using lead shields during exposures, and monitoring worker radiation doses.
This document discusses radiobiology, which is the study of how ionizing radiation interacts with living things. It involves understanding radiation physics and chemistry of how radiation is absorbed. The document outlines the history of x-rays and their discovery. It describes different types of ionizing radiation including electromagnetic radiation like x-rays and gamma rays, as well as particulate radiations like electrons, protons, alpha particles, neutrons, and ions. It discusses the physics of these radiations and how they interact with and are absorbed by biological matter, either through direct interactions with molecules like DNA or indirectly through ionization of water producing free radicals.
Radiation can be ionizing or non-ionizing. Ionizing radiation like x-rays and gamma rays can damage cells by ionizing them. Non-ionizing radiation like visible light and microwaves do not have enough energy to ionize atoms. The health effects of radiation depend on dose, exposure time, and radiation type. Proper safety protocols aim to keep radiation exposure as low as reasonably achievable.
The Bohr model of the atom consists of a dense
positive nucleus surrounded by electrons in
shells. The nucleus contains nucleons which
are either protons or neutrons. The proton has
a positive charge and an atomic mass of 1 AMU.
The neutron has zero charge and an atomic
mass of 1 AMU. The atomic number (Z) is
equal to the number of protons in the nucleus.
The atomic mass (A) is equal to the sum of the
neutrons and protons in the nucleus. The electron has a negative charge and a mass of almost
zero. Electrons in an atom only move in specifi c orbits. Each orbit or shell has its own binding energy. The binding energy is the energy
required to remove an electron from its shell.
The shells closer to the nucleus have higher
binding energies. Ionization occurs when an
electron is removed from an atom. This results
in an ion pair made up of one positive and
one negative ion. Ionizing radiation consists
of electromagnetic and particulate radiations
with enough energy to ionize atoms. X-rays
and gamma rays are forms of electromagnetic
radiation. Alpha and beta radiations are forms of
particulate radiation.
There are two systems of radiation units, the
SI and the conventional. The units of exposure
are the roentgen (R) and the coulombs per
kilogram (C/kg). The units of dose are the gray
and the rad. The units of the effective dose are
the sievert and the rem.
Elements with similar electron shell structures have similar chemical properties. Isotopes
are elements with the same atomic number but
different atomic masses. Isotopes have the same
chemical properties. The atomic weight of an
element is the average of the atomic masses of
naturally occurring isotopes. When elements
are arranged in order of increasing atomic number, they form the periodic table of elements.
This document discusses radiation safety in the workplace. It defines radiation and different types including alpha, beta, gamma, and x-rays. About 150,000 Canadians are monitored annually for workplace radiation exposure, mostly in healthcare and nuclear power. Radiation is either ionizing, with enough energy to remove electrons from atoms, or non-ionizing. The key units discussed are activity (decays per second), half-life (time for half of atoms to decay), various dose units like gray and sievert, and limits like effective dose limits of 50 mSv per year for nuclear workers. Both acute high doses and chronic low doses are addressed, noting cancer risk increases with increased radiation exposure.
This document discusses different types of radiation and their sources. It describes two main types - non-ionizing radiation which does not have enough energy to ionize atoms, and ionizing radiation which does. Ionizing radiation includes alpha, beta, gamma, x-rays and neutron radiation. Sources of ionizing radiation include natural background radiation from cosmic rays, radioactive elements in the earth's crust, and radon gas; as well as artificial sources like nuclear weapons testing, medical equipment, industrial uses, and the nuclear fuel cycle.
Radioactivity refers to the particles emitted from unstable atomic nuclei and includes alpha, beta, and gamma radiation. Different types of radioactive decay lead to different decay paths that transform nuclei into other elements. The rate of radioactive decay is measured by half-life, which is the time for half of a radioactive substance to decay.
Lesson 4 Ionizing Radiation | The Harnessed Atom (2016)ORAU
The document provides information about different types of radiation, including ionizing and non-ionizing radiation. It discusses radioactive decay and half-life. It also addresses natural and human-made sources of radiation exposure and averages about 6 mSv of annual exposure for Americans. Radiation can potentially cause cell damage but low levels are generally harmless due to body's ability to repair itself.
The document discusses sources, effects, and protection from radiation. It describes natural sources like cosmic rays, terrestrial radiation from elements in the ground, and atmospheric radiation. Man-made sources include X-rays from medical procedures and radioactive fallout from nuclear explosions. Exposure to high doses of radiation can cause acute radiation syndrome and organ damage, while long-term low doses may increase cancer risks. Protection methods include limiting unnecessary medical X-rays, using lead shields during exposures, and monitoring worker radiation doses.
This document discusses radiobiology, which is the study of how ionizing radiation interacts with living things. It involves understanding radiation physics and chemistry of how radiation is absorbed. The document outlines the history of x-rays and their discovery. It describes different types of ionizing radiation including electromagnetic radiation like x-rays and gamma rays, as well as particulate radiations like electrons, protons, alpha particles, neutrons, and ions. It discusses the physics of these radiations and how they interact with and are absorbed by biological matter, either through direct interactions with molecules like DNA or indirectly through ionization of water producing free radicals.
Radiation can be ionizing or non-ionizing. Ionizing radiation like x-rays and gamma rays can damage cells by ionizing them. Non-ionizing radiation like visible light and microwaves do not have enough energy to ionize atoms. The health effects of radiation depend on dose, exposure time, and radiation type. Proper safety protocols aim to keep radiation exposure as low as reasonably achievable.
The Bohr model of the atom consists of a dense
positive nucleus surrounded by electrons in
shells. The nucleus contains nucleons which
are either protons or neutrons. The proton has
a positive charge and an atomic mass of 1 AMU.
The neutron has zero charge and an atomic
mass of 1 AMU. The atomic number (Z) is
equal to the number of protons in the nucleus.
The atomic mass (A) is equal to the sum of the
neutrons and protons in the nucleus. The electron has a negative charge and a mass of almost
zero. Electrons in an atom only move in specifi c orbits. Each orbit or shell has its own binding energy. The binding energy is the energy
required to remove an electron from its shell.
The shells closer to the nucleus have higher
binding energies. Ionization occurs when an
electron is removed from an atom. This results
in an ion pair made up of one positive and
one negative ion. Ionizing radiation consists
of electromagnetic and particulate radiations
with enough energy to ionize atoms. X-rays
and gamma rays are forms of electromagnetic
radiation. Alpha and beta radiations are forms of
particulate radiation.
There are two systems of radiation units, the
SI and the conventional. The units of exposure
are the roentgen (R) and the coulombs per
kilogram (C/kg). The units of dose are the gray
and the rad. The units of the effective dose are
the sievert and the rem.
Elements with similar electron shell structures have similar chemical properties. Isotopes
are elements with the same atomic number but
different atomic masses. Isotopes have the same
chemical properties. The atomic weight of an
element is the average of the atomic masses of
naturally occurring isotopes. When elements
are arranged in order of increasing atomic number, they form the periodic table of elements.
This document discusses radiation safety in the workplace. It defines radiation and different types including alpha, beta, gamma, and x-rays. About 150,000 Canadians are monitored annually for workplace radiation exposure, mostly in healthcare and nuclear power. Radiation is either ionizing, with enough energy to remove electrons from atoms, or non-ionizing. The key units discussed are activity (decays per second), half-life (time for half of atoms to decay), various dose units like gray and sievert, and limits like effective dose limits of 50 mSv per year for nuclear workers. Both acute high doses and chronic low doses are addressed, noting cancer risk increases with increased radiation exposure.
This document discusses different types of radiation and their sources. It describes two main types - non-ionizing radiation which does not have enough energy to ionize atoms, and ionizing radiation which does. Ionizing radiation includes alpha, beta, gamma, x-rays and neutron radiation. Sources of ionizing radiation include natural background radiation from cosmic rays, radioactive elements in the earth's crust, and radon gas; as well as artificial sources like nuclear weapons testing, medical equipment, industrial uses, and the nuclear fuel cycle.
Radioactivity refers to the particles emitted from unstable atomic nuclei and includes alpha, beta, and gamma radiation. Different types of radioactive decay lead to different decay paths that transform nuclei into other elements. The rate of radioactive decay is measured by half-life, which is the time for half of a radioactive substance to decay.
Radioactive contamination occurs when radioactive material is deposited on or in an object or a person. Radioactive materials released into the environment can cause air, water, surfaces, soil, plants, buildings, people, or animals to become contaminated.
This document discusses radiation and radioactive pollution. It defines radiation as particles and energy emitted by unstable atoms during radioactive decay. Radiation comes from both natural sources like the sun and human activities like nuclear power plants and medical treatments. It also causes radioactive pollution when emitted into the air, water or soil. The effects of radiation on humans can include burns, cancer and death. However, radiation also has many beneficial uses in areas like medicine, communication and science. The document concludes with emphasizing the importance of safety measures and pollution prevention to minimize risks from radiation while allowing its productive applications.
This document discusses radioactive pollution and radiation. It defines radiation and classifies it as ionizing or non-ionizing. Ionizing radiation can penetrate tissues and deposit energy, causing damage to living cells. Sources of radiation include natural sources like cosmic rays, terrestrial and atmospheric radiation, and internal radiation from radioactive substances in the body. Man-made sources include X-rays, radioactive fallout from nuclear explosions, and appliances containing radioactive materials. Units are used to measure radiation dose and its effects. Radiation exposure can cause both immediate effects like sickness and death as well as delayed effects like cancer and genetic mutations. Control of radiation involves monitoring sources, safe handling, disposal of waste, and following recommendations to prevent exposure.
radioactive-pollution slide share for effectively studyingvimalkumar678310
Radioactive contamination, also called radiological pollution, is the deposition of, or presence of radioactive substances on surfaces or within solids, liquids, or gases (including the human body), where their presence is unintended or undesirable (from the International Atomic Energy Agency (IAEA) definition).Such contamination presents a hazard because the radioactive decay of the contaminants produces ionizing radiation (namely alpha, beta, gamma rays and free neutrons). The degree of hazard is determined by the concentration of the contaminants, the energy of the radiation being emitted, the type of radiation, and the proximity of the contamination to organs of the body. It is important to be clear that the contamination gives rise to the radiation hazard, and the terms "radiation" and "contamination" are not interchangeable.
The sources of radioactive pollution can be classified into two groups: natural and man-made. Following an atmospheric nuclear weapon discharge or a nuclear reactor containment breach, the air, soil, people, plants, and animals in the vicinity will become contaminated by nuclear fuel and fission products. A spilled vial of radioactive material like uranyl nitrate may contaminate the floor and any rags used to wipe up the spill. Cases of widespread radioactive contamination include the Bikini Atoll, the Rocky Flats Plant in Colorado, the area near the Fukushima Daiichi nuclear disaster, the area near the Chernobyl disaster, and the area near the Mayak disaster.Such contamination presents a hazard because the radioactive decay of the contaminants produces ionizing radiation (namely alpha, beta, gamma rays and free neutrons). The degree of hazard is determined by the concentration of the contaminants, the energy of the radiation being emitted, the type of radiation, and the proximity of the contamination to organs of the body. It is important to be clear that the contamination gives rise to the radiation hazard, and the terms "radiation" and "contamination" are not interchangeable.
The sources of radioactive pollution can be classified into two groups: natural and man-made. Following an atmospheric nuclear weapon discharge or a nuclear reactor containment breach, the air, soil, people, plants, and animals in the vicinity will become contaminated by nuclear fuel and fission products. A spilled vial of radioactive material like uranyl nitrate may contaminate the floor and any rags used to wipe up the spill. Cases of widespread radioactive contamination include the Bikini Atoll, the Rocky Flats Plant in Colorado, the area near the Fukushima Daiichi nuclear disaster, the area near the Chernobyl disaster, and the area near the Mayak disaster.Such contamination presents a hazard because the radioactive decay of the contaminants produces ionizing radiation (namely alpha, beta, gamma rays and free neutrons). The degree of hazard is determined by the concentration of the contaminants, the energy of the radiation being emitted.
This document provides an overview of radiobiology and radiation biology. It begins by defining radiobiology as the study of the effects of ionizing radiation on living systems. It then discusses the initial interactions of radiation with matter on an atomic level and how this can lead to molecular changes in cells and organisms over time, potentially resulting in injury or death. The document further explores the composition of matter, types of radiation including ionizing and non-ionizing radiation, radiation measurements, and concepts such as linear energy transfer and relative biological effectiveness. It also examines the sequence of radiation injury and key related terms.
This document discusses atomic theory and electromagnetic radiation, including x-rays. It provides an overview of the atomic structure, including protons, neutrons, and electrons. It describes the electromagnetic spectrum and different types of ionizing radiation. X-rays are used in diagnostic imaging like radiography, fluoroscopy, mammography, and CT scans. Proper protection methods are needed to reduce radiation exposure for patients, staff, and the public.
Ionising radiation is radiation that has sufficient energy to cause ionisation by removing electrons from atoms. It includes alpha particles, beta particles, gamma rays, X-rays, protons and neutrons. Ionising radiation can come from natural sources like radon gas or cosmic rays, or artificial sources like medical X-rays. Different types of ionising radiation penetrate tissue to different degrees and can be absorbed through the skin, inhaled or ingested, posing greater or lesser health risks depending on the dose and radiation type.
This document provides an introduction to clinical radiology. It discusses the types of electromagnetic waves and radiation used in medical imaging, including ionizing and non-ionizing radiation. It describes different medical imaging modalities like x-rays, CT, MRI, ultrasound, nuclear imaging and their basic principles. It also covers topics like radiation measurements, dose, exposure, shielding and prevention of radiation exposure for both patients and staff. The document provides a high-level overview of the key concepts in clinical radiology.
1. Radiation is energy that travels through space in the form of waves or particles. There are two main types: ionizing radiation which can disrupt atoms and molecules, and non-ionizing radiation which does not have enough energy to do so.
2. Sources of radiation include natural background radiation like cosmic rays from space, radioactive elements in the ground and air, and internal radioactive isotopes in the body. Man-made sources include medical x-rays, nuclear power plants, consumer products, and fallout from nuclear weapons tests and disasters.
3. Ionizing radiation includes alpha particles, beta particles, gamma rays, and x-rays. They are able to ionize or change atoms and molecules and
This document discusses different types of radiation, their sources, and effects. It covers ionizing radiation which can penetrate tissues and deposit energy, causing damage to living cells. Sources of radiation include natural (cosmic rays, terrestrial elements), environmental (radon, thorium), internal (uranium in the body), and man-made sources like X-rays, nuclear fallout, and some appliances. Radiation is measured in units like rad, rem, and roentgen. Biological effects are both immediate like sickness, and delayed like cancer and genetic mutations. Control of radiation hazards involves monitoring sources, safe handling, disposal of waste, and use of shielding and protective equipment.
This document discusses different types of radiation, their sources, and effects. It describes ionizing radiation as having high enough energy to penetrate tissues and potentially damage cells. Sources of ionizing radiation include radioactive materials naturally occurring in the environment as well as man-made sources like nuclear explosions and medical X-rays. Exposure to ionizing radiation can cause both immediate effects like radiation sickness as well as delayed effects including cancer and genetic mutations. Controls aim to monitor and prevent leakage of radiation from natural and artificial sources to minimize harmful biological impacts on humans and the environment.
Radiation can be ionizing or non-ionizing. Ionizing radiation has enough energy to remove electrons from atoms and molecules and includes alpha particles, beta particles, gamma rays, x-rays, and neutrons. Non-ionizing radiation does not have enough energy to ionize but can excite electrons. Radiation is quantified by activity (disintegrations per second), exposure (energy deposited in air), absorbed dose (energy absorbed per mass), and biologically equivalent dose. Different types of ionizing radiation interact differently with tissues depending on their mass and charge. Acute radiation exposure can cause sickness and death while long-term effects include increased cancer risks and organ damage.
Nuclear pollution occurs when radioactive material is released into the environment through various human activities like nuclear power generation, weapons production, mining, and medical use. It can cause health issues ranging from mild skin irritation to cancer and death from exposure. The main sources of nuclear pollution are nuclear power plants, mining and milling of uranium ores, waste from nuclear weapons, and disposal of radioactive materials from medical and research facilities. Safety measures need to be strengthened to prevent nuclear pollution and reduce associated health risks. Moving away from nuclear power and toward more sustainable and renewable energy sources can also help address this issue over the long term.
Dosimetry is the process of measuring radiation doses and assigning them to individuals. There are two types of exposure: external, where radiation comes from outside the body, and internal, where radiation is emitted from substances inside the body. Radiation can be measured using personal dosimeters, environmental monitoring, or biological sampling. The main types of radiation are alpha, beta, gamma, and neutrons. Radiation dose is quantified using absorbed dose, equivalent dose, and effective dose. Dosimeters like thermoluminescent dosimeters and solid-state track detectors are used to measure external radiation doses, while internal doses require analysis of biological samples and modeling of radiation deposition and energy absorption in tissues. Measurement uncertainty arises from factors like
Dosimetry is the process of measuring radiation doses and assigning them to individuals. There are two types of exposure: external, where radiation comes from outside the body, and internal, where radiation is emitted from substances inside the body. Radiation can be measured using personal dosimeters, environmental monitoring, or biological sampling. The main types of radiation are alpha, beta, gamma, and neutrons. Radiation dose is quantified using absorbed dose, equivalent dose, and effective dose. Dosimeters come in passive and active varieties to measure external radiation doses, while internal doses require estimating intake and calculating dose to organs over time. Measurement uncertainty arises from factors like dosimeter calibration and environmental variability.
Radioactive pollution occurs when radioactive substances are present where they are not desired, such as in the air, soil, water, or within other materials. The two main sources of radioactive pollution are nuclear accidents and disposal of radioactive waste. The Chernobyl disaster in 1986 and Fukushima Daiichi nuclear disaster in 2011 both resulted in widespread radioactive contamination of the surrounding environment due to atmospheric release and water contamination. Exposure to ionizing radiation emitted by radioactive materials can increase cancer risks in both humans and animals. Protective measures aim to limit exposure and proper disposal methods seek to isolate radioactive waste.
Learning more about radioactivity by AREVA - 2005 publicationAREVA
Radioactivity comes from unstable atomic nuclei that spontaneously emit radiation. Some elements like uranium and radium are naturally radioactive, while other radioisotopes have been artificially produced. Radioactivity is measured using units like becquerel (disintegrations per second), gray (energy absorbed), and sievert (biological effects on exposure). Proper shielding, distance, and limiting exposure time can help protect against radiation.
This course covers accident and injury prevention. It is supported by a grant from OSHA and involves cooperation with the Tulalip Occupational Safety and Health Administration. The course introduces key concepts like proactive versus reactive approaches to safety, definitions of accidents, hazards, risks, and safety. It examines types of accidents and factors that can cause accidents, including management, environment, equipment, and human behavior issues. The course also discusses policy and procedures, compliance requirements, and the components and goals of an effective accident prevention program, including safety committees and their meetings.
This document discusses Rickettsia and Chlamydia, which are obligate intracellular organisms. It describes the genera of Rickettsia including Rickettsia, Ehrlichia, Coxiella, and Bartonella. Key differences between Rickettsiae and Chlamydiae include Rickettsiae having cytochromes and aerobic metabolism while Chlamydiae lack cytochromes and have anaerobic metabolism. The document also discusses the structure, metabolism, growth, pathogenesis, diagnosis, treatment, and control of Rickettsia and Chlamydia.
Radioactive contamination occurs when radioactive material is deposited on or in an object or a person. Radioactive materials released into the environment can cause air, water, surfaces, soil, plants, buildings, people, or animals to become contaminated.
This document discusses radiation and radioactive pollution. It defines radiation as particles and energy emitted by unstable atoms during radioactive decay. Radiation comes from both natural sources like the sun and human activities like nuclear power plants and medical treatments. It also causes radioactive pollution when emitted into the air, water or soil. The effects of radiation on humans can include burns, cancer and death. However, radiation also has many beneficial uses in areas like medicine, communication and science. The document concludes with emphasizing the importance of safety measures and pollution prevention to minimize risks from radiation while allowing its productive applications.
This document discusses radioactive pollution and radiation. It defines radiation and classifies it as ionizing or non-ionizing. Ionizing radiation can penetrate tissues and deposit energy, causing damage to living cells. Sources of radiation include natural sources like cosmic rays, terrestrial and atmospheric radiation, and internal radiation from radioactive substances in the body. Man-made sources include X-rays, radioactive fallout from nuclear explosions, and appliances containing radioactive materials. Units are used to measure radiation dose and its effects. Radiation exposure can cause both immediate effects like sickness and death as well as delayed effects like cancer and genetic mutations. Control of radiation involves monitoring sources, safe handling, disposal of waste, and following recommendations to prevent exposure.
radioactive-pollution slide share for effectively studyingvimalkumar678310
Radioactive contamination, also called radiological pollution, is the deposition of, or presence of radioactive substances on surfaces or within solids, liquids, or gases (including the human body), where their presence is unintended or undesirable (from the International Atomic Energy Agency (IAEA) definition).Such contamination presents a hazard because the radioactive decay of the contaminants produces ionizing radiation (namely alpha, beta, gamma rays and free neutrons). The degree of hazard is determined by the concentration of the contaminants, the energy of the radiation being emitted, the type of radiation, and the proximity of the contamination to organs of the body. It is important to be clear that the contamination gives rise to the radiation hazard, and the terms "radiation" and "contamination" are not interchangeable.
The sources of radioactive pollution can be classified into two groups: natural and man-made. Following an atmospheric nuclear weapon discharge or a nuclear reactor containment breach, the air, soil, people, plants, and animals in the vicinity will become contaminated by nuclear fuel and fission products. A spilled vial of radioactive material like uranyl nitrate may contaminate the floor and any rags used to wipe up the spill. Cases of widespread radioactive contamination include the Bikini Atoll, the Rocky Flats Plant in Colorado, the area near the Fukushima Daiichi nuclear disaster, the area near the Chernobyl disaster, and the area near the Mayak disaster.Such contamination presents a hazard because the radioactive decay of the contaminants produces ionizing radiation (namely alpha, beta, gamma rays and free neutrons). The degree of hazard is determined by the concentration of the contaminants, the energy of the radiation being emitted, the type of radiation, and the proximity of the contamination to organs of the body. It is important to be clear that the contamination gives rise to the radiation hazard, and the terms "radiation" and "contamination" are not interchangeable.
The sources of radioactive pollution can be classified into two groups: natural and man-made. Following an atmospheric nuclear weapon discharge or a nuclear reactor containment breach, the air, soil, people, plants, and animals in the vicinity will become contaminated by nuclear fuel and fission products. A spilled vial of radioactive material like uranyl nitrate may contaminate the floor and any rags used to wipe up the spill. Cases of widespread radioactive contamination include the Bikini Atoll, the Rocky Flats Plant in Colorado, the area near the Fukushima Daiichi nuclear disaster, the area near the Chernobyl disaster, and the area near the Mayak disaster.Such contamination presents a hazard because the radioactive decay of the contaminants produces ionizing radiation (namely alpha, beta, gamma rays and free neutrons). The degree of hazard is determined by the concentration of the contaminants, the energy of the radiation being emitted.
This document provides an overview of radiobiology and radiation biology. It begins by defining radiobiology as the study of the effects of ionizing radiation on living systems. It then discusses the initial interactions of radiation with matter on an atomic level and how this can lead to molecular changes in cells and organisms over time, potentially resulting in injury or death. The document further explores the composition of matter, types of radiation including ionizing and non-ionizing radiation, radiation measurements, and concepts such as linear energy transfer and relative biological effectiveness. It also examines the sequence of radiation injury and key related terms.
This document discusses atomic theory and electromagnetic radiation, including x-rays. It provides an overview of the atomic structure, including protons, neutrons, and electrons. It describes the electromagnetic spectrum and different types of ionizing radiation. X-rays are used in diagnostic imaging like radiography, fluoroscopy, mammography, and CT scans. Proper protection methods are needed to reduce radiation exposure for patients, staff, and the public.
Ionising radiation is radiation that has sufficient energy to cause ionisation by removing electrons from atoms. It includes alpha particles, beta particles, gamma rays, X-rays, protons and neutrons. Ionising radiation can come from natural sources like radon gas or cosmic rays, or artificial sources like medical X-rays. Different types of ionising radiation penetrate tissue to different degrees and can be absorbed through the skin, inhaled or ingested, posing greater or lesser health risks depending on the dose and radiation type.
This document provides an introduction to clinical radiology. It discusses the types of electromagnetic waves and radiation used in medical imaging, including ionizing and non-ionizing radiation. It describes different medical imaging modalities like x-rays, CT, MRI, ultrasound, nuclear imaging and their basic principles. It also covers topics like radiation measurements, dose, exposure, shielding and prevention of radiation exposure for both patients and staff. The document provides a high-level overview of the key concepts in clinical radiology.
1. Radiation is energy that travels through space in the form of waves or particles. There are two main types: ionizing radiation which can disrupt atoms and molecules, and non-ionizing radiation which does not have enough energy to do so.
2. Sources of radiation include natural background radiation like cosmic rays from space, radioactive elements in the ground and air, and internal radioactive isotopes in the body. Man-made sources include medical x-rays, nuclear power plants, consumer products, and fallout from nuclear weapons tests and disasters.
3. Ionizing radiation includes alpha particles, beta particles, gamma rays, and x-rays. They are able to ionize or change atoms and molecules and
This document discusses different types of radiation, their sources, and effects. It covers ionizing radiation which can penetrate tissues and deposit energy, causing damage to living cells. Sources of radiation include natural (cosmic rays, terrestrial elements), environmental (radon, thorium), internal (uranium in the body), and man-made sources like X-rays, nuclear fallout, and some appliances. Radiation is measured in units like rad, rem, and roentgen. Biological effects are both immediate like sickness, and delayed like cancer and genetic mutations. Control of radiation hazards involves monitoring sources, safe handling, disposal of waste, and use of shielding and protective equipment.
This document discusses different types of radiation, their sources, and effects. It describes ionizing radiation as having high enough energy to penetrate tissues and potentially damage cells. Sources of ionizing radiation include radioactive materials naturally occurring in the environment as well as man-made sources like nuclear explosions and medical X-rays. Exposure to ionizing radiation can cause both immediate effects like radiation sickness as well as delayed effects including cancer and genetic mutations. Controls aim to monitor and prevent leakage of radiation from natural and artificial sources to minimize harmful biological impacts on humans and the environment.
Radiation can be ionizing or non-ionizing. Ionizing radiation has enough energy to remove electrons from atoms and molecules and includes alpha particles, beta particles, gamma rays, x-rays, and neutrons. Non-ionizing radiation does not have enough energy to ionize but can excite electrons. Radiation is quantified by activity (disintegrations per second), exposure (energy deposited in air), absorbed dose (energy absorbed per mass), and biologically equivalent dose. Different types of ionizing radiation interact differently with tissues depending on their mass and charge. Acute radiation exposure can cause sickness and death while long-term effects include increased cancer risks and organ damage.
Nuclear pollution occurs when radioactive material is released into the environment through various human activities like nuclear power generation, weapons production, mining, and medical use. It can cause health issues ranging from mild skin irritation to cancer and death from exposure. The main sources of nuclear pollution are nuclear power plants, mining and milling of uranium ores, waste from nuclear weapons, and disposal of radioactive materials from medical and research facilities. Safety measures need to be strengthened to prevent nuclear pollution and reduce associated health risks. Moving away from nuclear power and toward more sustainable and renewable energy sources can also help address this issue over the long term.
Dosimetry is the process of measuring radiation doses and assigning them to individuals. There are two types of exposure: external, where radiation comes from outside the body, and internal, where radiation is emitted from substances inside the body. Radiation can be measured using personal dosimeters, environmental monitoring, or biological sampling. The main types of radiation are alpha, beta, gamma, and neutrons. Radiation dose is quantified using absorbed dose, equivalent dose, and effective dose. Dosimeters like thermoluminescent dosimeters and solid-state track detectors are used to measure external radiation doses, while internal doses require analysis of biological samples and modeling of radiation deposition and energy absorption in tissues. Measurement uncertainty arises from factors like
Dosimetry is the process of measuring radiation doses and assigning them to individuals. There are two types of exposure: external, where radiation comes from outside the body, and internal, where radiation is emitted from substances inside the body. Radiation can be measured using personal dosimeters, environmental monitoring, or biological sampling. The main types of radiation are alpha, beta, gamma, and neutrons. Radiation dose is quantified using absorbed dose, equivalent dose, and effective dose. Dosimeters come in passive and active varieties to measure external radiation doses, while internal doses require estimating intake and calculating dose to organs over time. Measurement uncertainty arises from factors like dosimeter calibration and environmental variability.
Radioactive pollution occurs when radioactive substances are present where they are not desired, such as in the air, soil, water, or within other materials. The two main sources of radioactive pollution are nuclear accidents and disposal of radioactive waste. The Chernobyl disaster in 1986 and Fukushima Daiichi nuclear disaster in 2011 both resulted in widespread radioactive contamination of the surrounding environment due to atmospheric release and water contamination. Exposure to ionizing radiation emitted by radioactive materials can increase cancer risks in both humans and animals. Protective measures aim to limit exposure and proper disposal methods seek to isolate radioactive waste.
Learning more about radioactivity by AREVA - 2005 publicationAREVA
Radioactivity comes from unstable atomic nuclei that spontaneously emit radiation. Some elements like uranium and radium are naturally radioactive, while other radioisotopes have been artificially produced. Radioactivity is measured using units like becquerel (disintegrations per second), gray (energy absorbed), and sievert (biological effects on exposure). Proper shielding, distance, and limiting exposure time can help protect against radiation.
This course covers accident and injury prevention. It is supported by a grant from OSHA and involves cooperation with the Tulalip Occupational Safety and Health Administration. The course introduces key concepts like proactive versus reactive approaches to safety, definitions of accidents, hazards, risks, and safety. It examines types of accidents and factors that can cause accidents, including management, environment, equipment, and human behavior issues. The course also discusses policy and procedures, compliance requirements, and the components and goals of an effective accident prevention program, including safety committees and their meetings.
This document discusses Rickettsia and Chlamydia, which are obligate intracellular organisms. It describes the genera of Rickettsia including Rickettsia, Ehrlichia, Coxiella, and Bartonella. Key differences between Rickettsiae and Chlamydiae include Rickettsiae having cytochromes and aerobic metabolism while Chlamydiae lack cytochromes and have anaerobic metabolism. The document also discusses the structure, metabolism, growth, pathogenesis, diagnosis, treatment, and control of Rickettsia and Chlamydia.
This document discusses occupational health and toxicology. It defines occupational health as promoting worker well-being in all occupations. Occupational safety aims to control workplace hazards and their impact. The document outlines several occupational diseases caused by exposure to substances like asbestos, silica, coal dust, heavy metals and industrial chemicals. It describes symptoms, exposure sources and prevention methods for conditions like pneumoconiosis, asbestosis, silicosis, and poisonings from lead, nickel, manganese, chromium, carbon monoxide and ammonia. The objectives of occupational health services are to prevent diseases and injuries, adapt work environments, and promote worker efficiency and wellness.
This document discusses prion diseases, which are infectious neurological disorders caused by misfolded prion proteins. It summarizes that prion diseases include Kuru, Creutzfeldt-Jakob disease, and mad cow disease. Prion diseases can be infectious, inherited, or sporadic in origin. The document outlines the differences between normal and misfolded prion proteins and reviews the mechanisms by which misfolded prions are able to induce normal prions to also misfold. It examines the cellular pathways involved in prion propagation and discusses factors that can prevent prion replication.
Physical hazards consists of occupational noise, vibration, inappropriate illumination, ventilation, ionizing and non ionizing radiation etc. Our hearing sensory will cause serious defects by noise and vibration
The document discusses chemical hazards in the textile and garment industry. It outlines the basic principles for safe use of dangerous substances, which are: 1) Elimination or reduction of danger by using non hazardous substances, 2) Isolation of danger by selecting low emission work processes, 3) Extraction of hazardous substances at the source of emission, 4) Local exhaust ventilation in addition to extraction at the source, and 5) Use of personal protective equipment as a last resort. The document provides examples of unacceptable and acceptable safety situations and discusses routes of exposure and common hazardous chemicals in the textile industry.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Executive Directors Chat Leveraging AI for Diversity, Equity, and InclusionTechSoup
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
2. • Radiation is the emission or transmission of energy in the form of waves or
particles through space or through a material medium. This includes:
electromagnetic radiation, such as radio waves, microwaves, infrared, visible
light, ultraviolet, x-rays, and gamma radiation (γ)
• Forms are Sound, heat or light
• Radiation ranges from Radio waves through visible light spectrum and up
through to gamma waves.
• Radiation hazards in the workplace fall into 2 categories
1. Ionizing
2. Non ionizing
INTRODUCTION
3.
4.
5.
6. I. Ionizing Radiation
• Ion is an electrically charged atom
• To ionize is to become electrically charged or to change into ions
• Ionizing radiation is radiation that becomes electrically charged or changed in
to ions
• Ionizing radiation includes alpha particle, beta particle, neutrons, X-
radiations, Gamma radiation, high speed electrons and high speed protons
• Ionizing radiation which is caused by unstable atoms giving off energy to
reach more stable state
• Health threat to humans because it involves changing the basic makeup of
atoms in cells more specifically the DNA molecules inside the cell
7. 2. Non ionizing Radiation
• Non ionizing radiation is described as a series of energy waves composed of
oscillating electric and magnetic fields travelling at the speed of light
• It includes the spectrum of ultraviolet (UV), visible light, infrared(IR),
microwave(MW), radio frequency (RF), and Extremely low frequency (ELF)
• Non ionizing radiations are found in a wide range
• Harmful to human ,may leads to cancer and damage DNA
8. Terms in Radiation
1. Radiation: Consist of energetic nuclear particles and includes alpha rays beta
rays and gamma rays X-rays neutrons high speed electrons high-speed protons
2. Radio active materials: emits radiations as the result of spontaneous nuclear
disintegration.
3. Restricted area: any area to which access is restricted in an attempt to protect
employees from exposure to radiation or radioactive materials
4. Dose: is the amount of ionizing radiation absorbed per unit of mass by part of
the body or whole body
5. Rad: is a measure of the dose of ionizing radiation absorbed by body tissue
stated in terms of the amount of energy absorbed per unit of mass of tissue. 1
Rad equal the absorption of 100 ergs per gram of tissue
9. 6. Rem : is a measure of the dose of ionizing radiation to body tissue stated in
terms of its estimated biological effects relative to a dose of one roentgen(r)
7. Air dose: an instrument measures the air at or near the surface of the body
where the highest dosage occurs to determine the level of dose
8. Personal monitoring devices: devices worn or carried by an individual
measure radiation doses received.
Eg. Film badges, pocket chambers, pocket dosimeter, film rings
9. Radiation area: area in which radiation hazards exist that could deliver doses
as follows
1. Within 1 hour- body receives more than 5 millirems
2. Within 5 consecutive days – body receives more than 100 millirems within one hour
10. High radiation area: area in which radiation hazards exist that could deliver
in excess of 100 millirems within one hour.
10. RADIOACTIVITY
• Due to nuclear instability, an atom’s nucleus exhibits the phenomenon of Radioactivity. Energy is
lost due to radiation that is emitted out of the unstable nucleus of an atom.
• Two forces, namely the force of repulsion that is electrostatic and the powerful forces of
attraction of the nucleus keep the nucleus together. These two forces are considered extremely
strong in the natural environment.
• The chance of encountering instability increases as the size of the nucleus increases because the
mass of the nucleus becomes a lot when concentrated.
• That’s the reason why atoms of Plutonium, Uranium are extremely unstable and undergo the
phenomenon of radioactivity.
Laws of Radioactivity
• Radioactivity is the result of the decay of the nucleus.
• The rate of decay of the nucleus is independent of temperature and pressure.
• Radioactivity is dependent on the law of conservation of charge.
• The physical and chemical properties of the daughter nucleus are different from the mother
nucleus.
• The emission of energy from radioactivity is always accompanied by alpha, beta, and gamma
particles.
• The rate of decay of radioactive substances is dependent on the number of atoms that are
present at the time.
11. HALF LIFE IN RADIOACTIVITY
• half-life, in radioactivity, the interval of time required for one-half of the atomic nuclei of
a radioactive sample to decay (change spontaneously into other nuclear species by
emitting particles and energy), or, equivalently, the time interval required for the number
of disintegrations per second of a radioactive material to decrease by one-half.
12. Effects of Long-term Radiation Exposure on the Human Body
• The effects of radiation depend on the type, energy, and location of the radiation source,
and the length of exposure. As shown in Figure, the average person is exposed to
background radiation, including cosmic rays from the sun and radon from uranium in the
ground
• Radiation from medical exposure, including CAT scans, radioisotope tests, X-rays, and so
on; and small amounts of radiation from other human activities, such as airplane flights
(which are bombarded by increased numbers of cosmic rays in the upper atmosphere),
radioactivity from consumer products, and a variety of radionuclides that enter our
bodies when we breathe (for example, carbon-14) or through the food chain (for
example, potassium-40, strontium-90, and iodine-131).
13. • A short-term, sudden dose of a large amount of radiation can cause a wide range of health
effects, from changes in blood chemistry to death. Short-term exposure to tens of rems of
radiation will likely cause very noticeable symptoms or illness; a dose of about 500 rems
is estimated to have a 50% probability of causing the death of the victim within 30 days
of exposure.
• Exposure to radioactive emissions has a cumulative effect on the body during a person’s
lifetime, which is another reason why it is important to avoid any unnecessary exposure to
radiation. Health effects of short-term exposure to radiation are shown in Table.
14. Classification of radiation exposure
• There are 2 types of radiation exposure
1. External radiation exposure
• It is measured by personnel monitoring devices
• Personnel monitoring provides a permanent, legal record of an individual's occupational
exposure to radiation.
• Types of monitoring devices in use today are pocket dosimeter, film badge, the thermo
luminescent dosimeter (TLD), and the optically stimulated luminescent (OSL) dosimeter.
2. Internal radiation exposure
• It results when the body is contaminated internally with a radionuclide.
• When radioactive materials enter into the body, they are metabolized and distributed to the
tissues according to the chemical properties of the elements and compounds in it.
• Internally deposited radioactive material can be monitored by measuring the radiation
emitted from the body or by measuring the amount of radioactive material contained in the
urine or feces. Such monitoring techniques are called bioassays.
• Bioassays are required whenever surveys or calculations indicate that an individual has been
exposed to concentrations of radioactive material in excess of established limits .
15. Radiation Detection
• There are several methods of detecting radiation, and they are based
on physical and chemical effects produced by radiation exposure.
• These methods are :-
1. Ionization
2. Photographic effect
3. Luminescence
4. Scintillation
16. 1. Ionization
• The ability of radiation to produce ionization in air is the basis for radiation
detection by the ionization chamber.
• It consists of an electrode positioned in the middle of a cylinder that
contains gas.
• When x-rays enter the chamber, they ionize the gas to form negative ions
(electrons) and positive ions (positrons).
• The electrons are collected by the positively charged rod, while the positive
ions are attracted to the negatively charged wall of the cylinder.
• The resulting small current from the chamber is subsequently amplified
and measured.
• The strength of the current is proportional to the radiation intensity
17. 2. Photographic effect
• The photographic effect, which refers to the ability of radiation to
blacken photographic films, is the basis of detectors that use film.
18. 3. Luminescence
• Luminescence describes the property by which certain materials emit light
when stimulated by a physiological process, a chemical or electrical action,
or by heat.
• When radiation strikes these materials, the electrons are raised to higher
orbital levels.
• When they fall back to their original orbital level, light is emitted.
• The amount of light emitted is proportional to the radiation intensity.
• Lithium fluoride, for example, will emit light when stimulated by heat.
• This is the fundamental basis of thermo luminescence dosimetry (TLD), a
method used to measure exposure to patients and personnel.
19. 4. Scintillation
• Scintillation refers to a flash of light.
• It is a property of certain crystals such as sodium iodide and cesium
iodide to absorb radiation and convert it to light.
• This light is then directed to a photomultiplier tube, which then
converts the light into an electrical pulse.
• The size of the pulse is proportional to the light intensity, which is in
turn proportional to the energy of the radiation.
20. Personal monitoring devices
• Devices for the measurement of the radiation doses received by individuals
working with radiation.
• Individuals who regularly work in controlled areas should wear personal
dosimeters to have their doses monitored on a regular basis.
• Used to verify the effectiveness of radiation control practices in the
workplace.
• Also used for detecting changes in radiation levels in the workplace and to
provide information in the event of accidental exposures.
• Four major types of monitoring devices are
1. Film badge
2. Pocket dosimeter
3. Thermo luminescent dosimeter
4. OSL dosimeter
21. 1. Film badge
• Most commonly used device for X and Gamma radiation
• It composed of a piece of photographic film and a special film holder
• The effect of radiation exposure is darkening the film
• The amount of darkening is proportional to the dose absorbed by the film.
• Film is placed in light right packet which is placed in the film holder
22. • Film holder contains various filters (e.g. lead, tin, aluminium, plastic)
• Radiation passing through the filters will produce a density distribution on
the film.
• Based on that distribution energy range and type of radiation can be
determined
23. 2. Pocket dosimeter
• Small ion chamber that are read on site type
• They are two types
(a) Direct reading dosimeter
(b) In direct reading dosimeter
24. (a) Direct reading dosimeter
• It consist of a small capacitor in a pen type housing
• It is charged before use with a dosimeter charger
• Radiation results in a loss of charge and a corresponding deflection of fiber
• It contains lens and scale by which the amount of fiber deflection (dose) can
easily be determined
• Using this personal dose can be determined immediately
• Exposure is in milli roentgens or in roentgens
25. (b) Indirect reading dosimeter
• It is also shaped like a pen, but must be read using a charger reader
• Charger reader is a voltmeter which is calibrated in roentgens
26.
27. 3. Thermo luminescent Dosimeters (TLD)
• Used for monitoring beta, x-, and gamma radiations
• Energy absorbed from the incident radiation excites and ionizes the
molecules of the thermo luminescent material
• Some of the energy is trapped by impurities or deformations in the material
• Energy remains trapped until the material is heated to a high temperature
• Once heated, the trapped energy is released as an emission of light
• The amount of light emitted is proportional to the energy absorbed within
the thermo luminescent material, which is proportional to the radiation dose
absorbed
• The emitted light is measured with a photomultiplier tube,
28.
29. 4. OSL dosimeter
• Optically stimulated luminescent (OSL) dosimeters are currently the
most common type of personnel dosimeter
• The basic principle of operation is similar to that of the TLD
• Energy absorbed from incident radiation becomes trapped in the
material.
• However, green laser light, rather than heat, is used to stimulate release
of the stored energy.
• The trapped energy is emitted as a blue light when it is released, so it
can be collected and distinguished from the green incident light.
• As with the TLD, the amount of light emitted is proportional to the
energy absorbed by the material, which is proportional to the radiation
dose absorbed.
30.
31. Hazards Associated with Particular Radiation
1. Infra Red Radiation
Definition:
• The Infra Red (IR) spectrum has been classified into the following sub-bands:
• Near Infrared (NIR): 780 – 3000 nm
• Middle Infrared (MIR): 3000 – 50 000 nm
• Far Infrared (FIR): 50 000 – 106 nm. (ISO, 2007)
• IR radiation is a by-product of processes involving lighting or heating.
• A prime source of IR is the sun
• Sources can include any combustion process, furnaces, glassmaking, welding, etc.
• IR is used specifically in heating lamps, room heaters and heat sensors
• Drying, baking, heating and dehydration of food products.
• IR conveyor ovens are used for curing, preheating, drying, soldering, stress
relieving and annealing.
32. • IR can also be used for welding of plastics.
• IR is also used for thermal imaging cameras which allow,
• fire fighters to make faster searches for victims in structures
• find hidden fires in walls
• find hot appliances
• to identify liquid levels in containers.
33. Health Effects:
• As absorption of IR radiation heats objects, it will clearly heat the human body.
• The eye is the organ most vulnerable to excessive IR exposure
• It damage the most vulnerable tissues being the cornea and aqueous humour
• It raises the overall temperature of the anterior eye.
• Long wavelength infrared rays also reach the retina and can cause permanent
damage to the delicate photoreceptors – for instance, through sun gazing.
• In general excessive exposure to the subcategories of IR can cause:
• Erythema MIR and FIR
• Pigmentation MIR and FIR
• Photo keratitis MIR and FIR
• Cataracts NIR (Highest energies)
• Retinal burn NIR
34. Risk Management:
• Control of IR is primarily at the design stage – to ensure that the design of IR
apparatus minimizes the adventitious emission of IR.
• It is achieved through engineering controls such as shielding and failsafe
inter-locks.
• Routine maintenance of the apparatus to ensure the barriers do not
degrade.
• Where there are high levels of adventitious IR emissions that cannot be
controlled by barriers
• There are appropriate personal protective such as reflecting face-shields,
glasses or other protective clothing including aprons, gloves and silvered
coveralls are required.
35. 2. Ultraviolet Radiation
Definition:
• Ultra violet (UV) light is EMR with a wavelength in the range of 100–400 nm
and is invisible to the human eye.
• While UV light is found naturally in sunlight
• It also can be found in workplaces as adventitious emissions associated with
electric arcs (eg: from arc welding) & high intensity discharge lights (eg:
mercury vapour lamps)
• The high energy nature of UV is also utilized in biosafety cabinets to sterilize
materials, and in germicidal lamps to disinfect water.
• UV can be broken into the following sub-bands:
• Near UV : 400-315 nm (UV-A)
• Middle UV : 315-280 nm (UV-B)
• Far UV : 280-100 nm (UV-C)
36.
37. • It can be argued that UV is the highest risk, with the highest number of
workers exposed and with the highest potential consequence.
• The largest category is outdoor workers, particularly the following
industries: construction, parks and gardens, lifeguards and rural workers
• Solar UV can reach the worker:
• Directly from the sun
• Scattered from the open sky
• Reflected from the environment.
38. Health effects
Acute and sub acute effects:
• Acute inflammatory erythema(sunburn)
• Pigment darkening and delayed tanning
• Epidermal hyperplasia
• Desquamation
• Immunologic changes
Chronic effects
• Photo aging
• Photocarcinogenesis
39. • The UV spectrum has many effects, both beneficial and damaging to human
health.
• Beneficial applications:
• used for killing bacteria (useful in medical or dental practices) and it can be used in
curing resins or inks.
• Exposure to sunlight is necessary to naturally develop vitamin D which is required for
healthy bones
• Some specific health effects of the different UV bands are:
• UV-A Sun tan and pigmentation
• UV-B Skin erythema, eye effects of keratitis and cataracts
• UV-C Skin cancer.
40.
41.
42. Risk Management:
• Engineering Controls: physical changes to the workplace or work environment
e.g. putting up shade‐cloth to protect workers from the sun.
• Administrative Controls: actions or behaviors employers and employees can
take to reduce to their exposure e.g. do outdoor jobs/tasks earlier in the
morning or later in the afternoon (when levels of solar UV are less intense).
• Personal Protective Equipment: equipment that employees wear to protect
against UV from the sun e.g. sun‐protection clothing that covers as much skin
as possible, hats, sunglasses, and sunscreen.
43. 3. Lasers
Definition:
• Laser (Light Amplification by Stimulated Emission of Radiation)
• devices utilise collimated (low divergence) beams of intense monochromatic,
coherent light in the UV, Visible or IR wavelengths.
• Lasers are classified according to the wavelength of light generated at their
maximum power output.
• Lasers are classed according to their safety as follows:
• Class 1 – Safe under reasonably foreseeable conditions (including use of
optical instruments)(eye is exposed to the direct or specularly reflected laser
beam).
• Class 1M(Magnifier)- λ in range 302.5 – 4000nm, safe under foreseeable
conditions, but may be hazardous if user employs optics within the beam.
44. • Class 2 – λ in range 400 – 700nm where normal aversion response
(blinking) offers adequate protection.
• Class 2M (Magnifier) – as for 2 but viewing of output may be more
hazardous if user employs optics within the beam
• Class 3R (Restricted) – λ in range 302.5 – 106 nm where direct intrabeam
viewing is potentially hazardous but risk is lower than 3B
• Class 3B – normally hazardous when intrabeam exposure occurs. Viewing
diffuse reflections is normally safe
• Class 4 – lasers that are capable of producing hazardous diffuse
reflections. They may cause skin injuries and could also constitute a fire
hazard. Use requires extreme precaution.
45. • In construction lasers are used in surveying, levelling and alignment
activities.
• Gas-assisted laser fusion cutting is performed by concentrating the light
from a laser onto a surface so that the material melts.
• Laser fusion cutting is also used for glass and ceramics, wood, cloth and
plastics, and is suited for high speed automation
• In surgery, a laser beam can cauterize a wound, repair damaged tissue, or
destroy cells under the beam, allowing for cutting through tissue without
damaging neighboring cells.
• Lasers have been used in place of surgical cutting instruments in various
surgeries, including eye surgery, gynecological procedures, and removal of
skin marks and excising small tumors.
• Lasers are also used in barcode readers, pointers, and a wide range of
consumer and industrial applications including CD/DVD players and
analytical devices.
46. Health Effects:
• The risks from lasers vary with the wavelength, intensity and duration of
the output or length of exposure.
• Except for Class 4 lasers, laser radiation is essentially optical with relatively
shallow penetration.
• The principal risk is normally to the eyes, although body burns may also
occur at high power.
• The risk may be either by directly viewing the beam, or seeing a reflected
beam off a mirrored (specular) surface.
47. Risk Management:
• Laser control measures vary depending on the type of laser being used and
the manner of its use with the specific precautions for each class being:
• Class 1 – none – provided Class 1 level maintained
• Class 2 - Avoid staring into the beam (ie: deliberate viewing), pointing the
beam at other people, or directing the beam into areas where other people
may be present
• Class 3 - Prevent eye exposure to the beam. Guard against unexpected
specular reflections (ie: those arising from shiny, mirror-like surfaces)
• Class 4 - Prevent eye and skin exposure to the beam, and to diffuse
reflections (scattering) of the beam. Protect against beam interaction on
flammable or other materials that could cause fire or fume.
48. Control & prevention
1. Radiation Protection Program
• Developing and implementing a radiation protection program is a best
practice for protecting workers from ionizing radiation.
• A radiation protection program is usually managed by a qualified expert
(e.g., health physicist), who is often called a radiation safety officer (RSO)
• ALARA stands for As Low As Reasonably Achievable (ALARA). It is a
guiding principle in radiation protection used to eliminate radiation doses
that have no direct benefit.
• Worker training on radiation protection, including health effects
associated with ionizing radiation dose, and radiation protection
procedures and controls to minimize dose and prevent contamination.
49. 2. Engineering Controls:
Some examples of engineering controls are discussed below,
including shielding and interlock systems.
• the need for shielding depends on the type and activity of the radiation
source
• In general, the floors, walls, ceilings, and doors should be built with
materials that provide shielding for the desired radiation protection.
• Lead shielding may be installed, if appropriate, including leaded glass,
sheet lead (e.g., built into walls), pre-fabricated lead-lined drywall or
lead-lined plywood, pre-fabricated lead-lined doors and door frames,
lead plates, and lead bricks.
• A radiation safety interlock system is a device that automatically shuts
off or reduces the radiation emission rate from radiation-producing
equipment (gamma or X-ray equipment or accelerator).
52. The three basic methods used to reduce the external radiation hazard are time,
distance, and shielding. Good radiation protection practices require optimization of
these fundamental techniques.
A. Time :The amount of radiation an individual accumulates will depend on how
long the individual stays in the radiation field, because:
Dose (mrem) = Dose Rate (mrem/hr) x Time (hr)
Therefore, to limit a person’s
dose, one can restrict the time spent in the area. How long a person can stay in
an area without exceeding a prescribed limit is called the "stay time" and is
calculated from the simple relationship:
Stay Time = Dose Rate (mrem/hr)/ Limit (mrem)
B. Distance :The amount of radiation an individual receives will also depend on how
close the person is to the source
53. 1. The Inverse Square Law - Point sources of x- and gamma radiation follow the
inverse square law, which states that the intensity of the radiation (I) decreases
in proportion to the inverse of the distance from the source (d) squared:
C. Shielding
When reducing the time or increasing the distance may not be
possible, one can choose shielding material to reduce the external radiation
hazard. The proper material to use depends on the type of radiation and its
energy.
54. 3. Administrative Controls:
• Examples of administrative controls include signage, warning systems,
and written operating procedures to prevent, reduce, or eliminate
radiation exposure.
55. Personal Protective Equipment
• Personal Protective Equipment (PPE) is used to prevent workers from
becoming contaminated with radioactive material.
• It can be used to prevent skin contamination with particulate
radiation (alpha and beta particles) and prevent inhalation of
radioactive materials.
• Alpha Radiation :
• Alpha particles have very low penetrating power, travel only a few
centimeters in air, and will not penetrate the dead outer layer of skin.
• Shielding is generally not required for alpha particles because external
exposure to alpha particles delivers no radiation dose
56. • When working with liquid sources that contain alpha particles, additional
PPE, such as gloves, a lab coat, and safety glasses, may be required to
prevent contamination or contact with the eyes.
• Beta Radiation
• High-energy beta particles can travel several meters in air and can
penetrate several millimeters into the skin
• For high-energy beta particles, first select adequate shielding with an
appropriate thickness of low atomic number (Z<14) materials, such as
specialized plastics (e.g., Plexiglas®) or aluminum.
• Using safety goggles as PPE can help protect workers' eyes against beta
particles as well as provide splash protection for the eyes (preventing
potential internal exposure). Gloves and a lab coat may be used to
prevent skin contamination.