ISO 45001 is the world’s international standard for occupational health and safety, issued to protect employees and visitors from work-related accidents and diseases. ISO 45001 certification was developed to mitigate any factors that can cause employees and businesses irreparable harm.
Its standards are the result of great effort by a committee of health and safety management experts who looked closely at a number of other approaches to system management — including ISO 9001 and ISO 14001. In addition, ISO 45001 was designed to take other existing occupational health and safety standards, such as OHSAS 18001, into account — as well as the ILO’s labor standards, conventions and safety guidelines.
This implementation guide will help you run through the benefits, PDCA Cycle, Annex SL structure in detail for implementing ISO 45001.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-45001
What Documents are required for ISO 45001:2018 Certification?Global Manager Group
This presentation has been developed by Global Manager Group, to give knowledge of mandatory and most commonly used documents required for ISO 45001:2018 implementation.
For further information about ISO 45001:2018 documentation requirements visit @ http://www.globalmanagergroup.com/
ISO 45001 – Health & Safety International StandardPECB
The webinar covers:
• Main changes OHSAS 18001 versus ISO45001
• Correlation matrix OHSAS 18001:2007 against ISO45001
• Best guess interpretation using ISO14001:2015 as the guideline for possible content of ISO45001
Presenter:
This webinar was hosted by Mr. David Smart, Managing Director of Smart ISO Systems & Smart Mentoring, and who is also PECB Certified Trainer.
Link of the recorded session published on YouTube: https://www.youtube.com/watch?v=69clAG1HYHI
ISO 45001 will be the new standard concerning Occupational Health and Safety. As its publication date is approaching, the main aim of this webinar will be to provide insights on some of the key implementation steps. Additionally, the webinar explores some possible ways of transitioning from OHSAS 18001 to ISO 45001.
Main points covered:
• Understanding the organizations objectives
• Identification of requirements for ISO 45001 implementation
• The role of top management in ISO 45001implementation
• The establishment of a positive and an effective safety culture within your organization
• Actions to be undertaken in case of hazard identification
Presenter:
Eldeen Pozniak is the Director of Pozniak Safety Associates Inc. and an International Management Consultant specializing in Occupational Health and Safety. She has provided a variety of ground to executive – level multi-project management and oversight and direction of the safety management systems, program elements and organizational culture from strategic and action plans to on-site implementation. Moreover, she has a unique blend of high level strategic, business, and safety management system understanding, and specific technical safety knowledge.
Link of the recorded session published on YouTube: https://youtu.be/xF5ejJFdUdw
Occupational Health & Safety Management System of ISO 45001 has the latest standard released in the year 2018. Around the world, major lives and living is lost because of occupational injuries. With so much of accidents & injuries, it is every organisation's responsibility to adopt the best practices of ISO 45001:2018. There is so much of activity that goes on with any company that they need to become responsible and identify the hazards that have risks to health & safety. (OSH)
By adopting best practices of ISO 45001:2018, organisations can improve their productivity by reducing loss time on account of injuries. With ever growing cost of healthcare, it is so important for every company to take all possible steps in eliminating health & safety risks.
Risk analysis (as per ISO 31000) will help organisation's to take steps to mitigate adverse HSE Risks. ISO 45001 2018 training is conducted by Productivity Management Group including Internal Auditor training of ISO 45001 2018.
PMG, helps companies, in implementing ISO 45001 implementation. Visit https://www.productivitymanagementgroup.com/iso-45001/
Global Manager Group provides presentation on IMS auditor training that helps organization to learn how effective auditing of integrated management system as per ISO 9001, ISO 14001 and ISO 45001 requirements which gives you maximum benefits and increase health safety efficiency in the organization with IMS Certification.
For more information visit https://www.globalmanagergroup.com/
What Documents are required for ISO 45001:2018 Certification?Global Manager Group
This presentation has been developed by Global Manager Group, to give knowledge of mandatory and most commonly used documents required for ISO 45001:2018 implementation.
For further information about ISO 45001:2018 documentation requirements visit @ http://www.globalmanagergroup.com/
ISO 45001 – Health & Safety International StandardPECB
The webinar covers:
• Main changes OHSAS 18001 versus ISO45001
• Correlation matrix OHSAS 18001:2007 against ISO45001
• Best guess interpretation using ISO14001:2015 as the guideline for possible content of ISO45001
Presenter:
This webinar was hosted by Mr. David Smart, Managing Director of Smart ISO Systems & Smart Mentoring, and who is also PECB Certified Trainer.
Link of the recorded session published on YouTube: https://www.youtube.com/watch?v=69clAG1HYHI
ISO 45001 will be the new standard concerning Occupational Health and Safety. As its publication date is approaching, the main aim of this webinar will be to provide insights on some of the key implementation steps. Additionally, the webinar explores some possible ways of transitioning from OHSAS 18001 to ISO 45001.
Main points covered:
• Understanding the organizations objectives
• Identification of requirements for ISO 45001 implementation
• The role of top management in ISO 45001implementation
• The establishment of a positive and an effective safety culture within your organization
• Actions to be undertaken in case of hazard identification
Presenter:
Eldeen Pozniak is the Director of Pozniak Safety Associates Inc. and an International Management Consultant specializing in Occupational Health and Safety. She has provided a variety of ground to executive – level multi-project management and oversight and direction of the safety management systems, program elements and organizational culture from strategic and action plans to on-site implementation. Moreover, she has a unique blend of high level strategic, business, and safety management system understanding, and specific technical safety knowledge.
Link of the recorded session published on YouTube: https://youtu.be/xF5ejJFdUdw
Occupational Health & Safety Management System of ISO 45001 has the latest standard released in the year 2018. Around the world, major lives and living is lost because of occupational injuries. With so much of accidents & injuries, it is every organisation's responsibility to adopt the best practices of ISO 45001:2018. There is so much of activity that goes on with any company that they need to become responsible and identify the hazards that have risks to health & safety. (OSH)
By adopting best practices of ISO 45001:2018, organisations can improve their productivity by reducing loss time on account of injuries. With ever growing cost of healthcare, it is so important for every company to take all possible steps in eliminating health & safety risks.
Risk analysis (as per ISO 31000) will help organisation's to take steps to mitigate adverse HSE Risks. ISO 45001 2018 training is conducted by Productivity Management Group including Internal Auditor training of ISO 45001 2018.
PMG, helps companies, in implementing ISO 45001 implementation. Visit https://www.productivitymanagementgroup.com/iso-45001/
Global Manager Group provides presentation on IMS auditor training that helps organization to learn how effective auditing of integrated management system as per ISO 9001, ISO 14001 and ISO 45001 requirements which gives you maximum benefits and increase health safety efficiency in the organization with IMS Certification.
For more information visit https://www.globalmanagergroup.com/
ISO 45001 Essentials for the Safety ProfessionalAbby Ferri
A high level overview of the ISO 45001 and how to approach it, no matter the size of your organization. Originally presented as a webinar for BLR sponsored by Avetta.
Specifying requirements for an occupational health & safety (OH&S) management system, guidance of its use, reducing work-place injuries with continuous improvement in the system are few of the many enablements that ISO 45001 brings to the table for ensuring a safe and healthy workplace.
Let's understand this standard in a little more
The new standard is designed to help organisations around the world ensure the health and safety of the people who make their business possible.
This standard is set to replace the popular OHSAS 18001 standard, with the overall purpose remaining the improvement of occupational health and safety performance. ISO 45001 will more easily integrate with other ISO Management Systems standards including ISO 9001:2015 and ISO 14001:2015.
ISO 45001 will require an organization to look beyond its immediate health and safety issues and take into account what the wider society expects of it. Organisations will have to think about their contractors and suppliers, as well as the effects their activities have on neighbouring communities.
As globalisation and global trade continue to escalate, organisations’ stakeholders are expecting organisations to be ethical in every aspect of their business, especially in the way they treat employees. ISO 45001 will give organisations an internationally recognised occupational health and safety standard to follow. This standard provides the specification for formal, systematic analysis and management of risk, management of regulatory compliance, promotion of safer work practices, and evaluation of occupational health and safety performance. This systematic approach facilitates a decrease in the number of incidents and ultimately less disruption to business.
In order to comply with international needs and requirements, more than 50 countries and organisations including the International Labour Organization (ILO) have been involved in the creation of ISO 45001. The aim is to provide a tool that can be used by any organisation, in any industry, anywhere in the world.
Organisations currently certified to OHSAS 18001, can remain so through the transition period offered after the publication of the ISO 45001 standard.
In this slideshare presentation we discuss ISO 45001 and where it is at.
The following topics are covered:
Where is ISO 45001 up to?
ISO 45001 draft International Standard
Key differences - AS/NZS 4801
Key differences - OHSAS 18001
What you need to do to prepare for ISO 45001.
If you are wanting to implement ISO 45001 then we recommend watching the webinar recording:
http://www.mangolive.com/blog-mango/iso45001-how-to-implement-webinar-recording
HSE Training Presentation for ISO 14001, ISO 45001 IntegrationGlobal Manager Group
Global Manager Group provides ppt presentation for HSE training. It provides brief information on requirements of ISO 14001:2015, ISO 45001:2018, implementation steps, internal audit, etc.
For more information visit: https://www.globalmanagergroup.com/
ISO 9001, 14001, 45001 (IMS) basics training materialRanganathanR9
This training material contains Basics of integrated management system on ISO 9001:2015, ISO 14001:2015 & ISO 45001:2018.
This training material will benefit the beginners who wants to learn about integrated management system & it benefits.
Also it will be useful to understand the benefit of integrate all 3 system in one.
This document will present an overview of the key changes between OHSAS 18001:2007 and the 2018 version of ISO 45001.
A Gap Analysis with guidance is also included in this gap guide to help you and your organization understand the change between OHSAS 18001 and ISO 45001 when you migrate.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-45001
Practical approach to implement and comply to ISO 45001:2016 Occupational Health & Safety Standard.
This presentation will help organisations to effectively implement and keep the compliance to ISO 45001:2016 OHSA Standard
NOSA’s very own Head of Innovation, Dr Deonie Botha, deliberated the fact that the business environment is complex in nature and that organisations need to function like complex adaptive systems to be robust and ensure long-term sustainability. ISO 45001 emphasises a multitude of technical and non-technical factors, which organisations need to manage in order to ensure compliance. However, Deonie also highlighted how it will also serve as a tool to assist organisations in being robust and ensuring sustainability.
ISO 45001 is the latest occupational health and safety management system standard which is being developed by the ISO. This standard will replace OHSAS 18001, and set specific requirements for an occupational health and safety management that will enable the organizations toward ensuring safety and health in workplace. This webinar will give you a detailed description of all changes when transitioning from OHSAS 18001 to ISO 45001.
Main points covered:
• Overview of ISO 45001 and reason why the revision of OHSAS 18001 was necessary
• ISO 45001 most significant changes and related standards affected by this change
• Recommendations on what steps to take when going through transition
Presenter:
This webinar was presented by PECB’s Course Development Manager for Health, Safety and Environment, Nysret Lezi.
Link of the recorded webinar published on YouTube: https://youtu.be/SUtF4KusUyE
ISO 14001 is the international standard for environmental management systems (EMS) and the most widely used EMS in the world, with over 14,000 organizations certified in the UK and over 360,000 ISO 14001 certificates issued globally.
ISO 14001 is the principal management system standard which specifies the requirements for the formulation and maintenance of an EMS. This helps to control your environmental aspects, reduce impacts and ensure legal compliance.
This implementation guide will help you run through the benefits, PDCA Cycle and Annex SL structure in detail for implementing ISO 14001.
Find out more or get a quote for ISO 14001 certification here – https://www.nqa.com/en-gb/certification/standards/iso-14001
ISO 45001 Essentials for the Safety ProfessionalAbby Ferri
A high level overview of the ISO 45001 and how to approach it, no matter the size of your organization. Originally presented as a webinar for BLR sponsored by Avetta.
Specifying requirements for an occupational health & safety (OH&S) management system, guidance of its use, reducing work-place injuries with continuous improvement in the system are few of the many enablements that ISO 45001 brings to the table for ensuring a safe and healthy workplace.
Let's understand this standard in a little more
The new standard is designed to help organisations around the world ensure the health and safety of the people who make their business possible.
This standard is set to replace the popular OHSAS 18001 standard, with the overall purpose remaining the improvement of occupational health and safety performance. ISO 45001 will more easily integrate with other ISO Management Systems standards including ISO 9001:2015 and ISO 14001:2015.
ISO 45001 will require an organization to look beyond its immediate health and safety issues and take into account what the wider society expects of it. Organisations will have to think about their contractors and suppliers, as well as the effects their activities have on neighbouring communities.
As globalisation and global trade continue to escalate, organisations’ stakeholders are expecting organisations to be ethical in every aspect of their business, especially in the way they treat employees. ISO 45001 will give organisations an internationally recognised occupational health and safety standard to follow. This standard provides the specification for formal, systematic analysis and management of risk, management of regulatory compliance, promotion of safer work practices, and evaluation of occupational health and safety performance. This systematic approach facilitates a decrease in the number of incidents and ultimately less disruption to business.
In order to comply with international needs and requirements, more than 50 countries and organisations including the International Labour Organization (ILO) have been involved in the creation of ISO 45001. The aim is to provide a tool that can be used by any organisation, in any industry, anywhere in the world.
Organisations currently certified to OHSAS 18001, can remain so through the transition period offered after the publication of the ISO 45001 standard.
In this slideshare presentation we discuss ISO 45001 and where it is at.
The following topics are covered:
Where is ISO 45001 up to?
ISO 45001 draft International Standard
Key differences - AS/NZS 4801
Key differences - OHSAS 18001
What you need to do to prepare for ISO 45001.
If you are wanting to implement ISO 45001 then we recommend watching the webinar recording:
http://www.mangolive.com/blog-mango/iso45001-how-to-implement-webinar-recording
HSE Training Presentation for ISO 14001, ISO 45001 IntegrationGlobal Manager Group
Global Manager Group provides ppt presentation for HSE training. It provides brief information on requirements of ISO 14001:2015, ISO 45001:2018, implementation steps, internal audit, etc.
For more information visit: https://www.globalmanagergroup.com/
ISO 9001, 14001, 45001 (IMS) basics training materialRanganathanR9
This training material contains Basics of integrated management system on ISO 9001:2015, ISO 14001:2015 & ISO 45001:2018.
This training material will benefit the beginners who wants to learn about integrated management system & it benefits.
Also it will be useful to understand the benefit of integrate all 3 system in one.
This document will present an overview of the key changes between OHSAS 18001:2007 and the 2018 version of ISO 45001.
A Gap Analysis with guidance is also included in this gap guide to help you and your organization understand the change between OHSAS 18001 and ISO 45001 when you migrate.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-45001
Practical approach to implement and comply to ISO 45001:2016 Occupational Health & Safety Standard.
This presentation will help organisations to effectively implement and keep the compliance to ISO 45001:2016 OHSA Standard
NOSA’s very own Head of Innovation, Dr Deonie Botha, deliberated the fact that the business environment is complex in nature and that organisations need to function like complex adaptive systems to be robust and ensure long-term sustainability. ISO 45001 emphasises a multitude of technical and non-technical factors, which organisations need to manage in order to ensure compliance. However, Deonie also highlighted how it will also serve as a tool to assist organisations in being robust and ensuring sustainability.
ISO 45001 is the latest occupational health and safety management system standard which is being developed by the ISO. This standard will replace OHSAS 18001, and set specific requirements for an occupational health and safety management that will enable the organizations toward ensuring safety and health in workplace. This webinar will give you a detailed description of all changes when transitioning from OHSAS 18001 to ISO 45001.
Main points covered:
• Overview of ISO 45001 and reason why the revision of OHSAS 18001 was necessary
• ISO 45001 most significant changes and related standards affected by this change
• Recommendations on what steps to take when going through transition
Presenter:
This webinar was presented by PECB’s Course Development Manager for Health, Safety and Environment, Nysret Lezi.
Link of the recorded webinar published on YouTube: https://youtu.be/SUtF4KusUyE
ISO 14001 is the international standard for environmental management systems (EMS) and the most widely used EMS in the world, with over 14,000 organizations certified in the UK and over 360,000 ISO 14001 certificates issued globally.
ISO 14001 is the principal management system standard which specifies the requirements for the formulation and maintenance of an EMS. This helps to control your environmental aspects, reduce impacts and ensure legal compliance.
This implementation guide will help you run through the benefits, PDCA Cycle and Annex SL structure in detail for implementing ISO 14001.
Find out more or get a quote for ISO 14001 certification here – https://www.nqa.com/en-gb/certification/standards/iso-14001
Why Audit? What Is the Difference Between Regulatory Auditing and ISO 14001 o...Triumvirate Environmental
We hear about the importance of conducting audits of your facilities. They allow us to be prepared for when the regulators show up. However, have you ever considered obtaining an ISO certification? The two standards that focus solely on EH&S are the ISO 14001 Environmental Management Standard or the ISO 45001 Occupations Health and Safety Standard. This session will cover the importance of auditing, what the ISO standards entail, and how they may actually help you with compliance and to show your end users that you care about your employees' health and safety and the environment.
Everything You Need to Know About ISO 45001 Certification in Namibia.pdfAnoosha Factocert
Obtaining ISO 45001 Certification in Namibia is critical for organizational support and growth. Factocert, being one of the most successful consulting firms, provides you with the most effective Consulting approaches. For more information visit www.factocert.com
What are the essential clauses to achieve ISO 45001 Certification in Netherla...Anoosha Factocert
ISO 45001 Certification in Netherlands applies to any organization that wants to enhance occupational health and safety, reduce hazards and minimize OH&S risks . Factocert is a well-known ISO consultant in the Netherlands. We provide the best ISO 45001 Certification auditors in Amsterdam, The Hague, Rotterdam, Utrecht, Delft, and other major cities with consulting, implementation, documentation, certification, audit, and other associated services at an affordable cost all over the world.
Complete Guide on ISO 45001 CertificationRaj Startup
ISO 45001 is an international standard that specifies requirements for an occupational health and safety (OH&S) management system. The primary goal of ISO 45001 is to provide a framework for organizations to effectively manage and improve their occupational health and safety performance.
IQ Academy Lunch & Learn Webinar | ISO 45001 - Our Implementation Experience ...IQ_UK
Over 7,600 people die each day from work-related accidents or diseases - that’s over 2.78 million every year. The burden of occupational injuries and diseases is significant, both for employers and the wider economy, resulting in losses from early retirements, staff absence and rising insurance premiums.
To combat the problem, ISO has developed a new standard, ISO 45001, occupational health and safety management systems, that will help organisations reduce this burden by providing a framework to improve employee safety, reduce workplace risks and create better, safer working conditions, all over the world.
Our IQ Academy webinar for March welcomed Wayne Darwin of Tarmac, Senior HSE Manager responsible for assurance and governance to provide an insight into the implementation experience of ISO 45001. Wayne has previously held operational and SHEQ roles with Hanson and Babcock and is currently involved in a project team implementing ISO 45001 across the Tarmac business.
During the bitesize lunch & learn session Wayne takes us through what ISO 45001 is, its benefits and purpose, his experience and approach to implementing the standard along with the opportunities and learning outcomes that have arisen from this.
You can find out more about the IQ Academy and our latest upcoming webinars at www.quarrying.org
The referenced links contained within the session can be found below:
https://www.ioshmagazine.com/article/early-doors
https://www.iso.org/news/ref2271.html
https://www.iosh.co.uk/VP/Home/Toolkit/ISO-45001-resources.aspx
http://www.hse.gov.uk/managing/iso45001.htm
https://www.ukas.com/services/other-services/directory-of-accredited-organisations/certification-bodies-management-systems/
ISO 9001 (Quality Management) is the most widely used QMS standard in the world, with over 1 million certificates issued to organizations in 178 countries.
The key to any successful business is strong quality control. If you want your operation to thrive, your consumer base must be confident that the goods or services you offer meet or exceed standards.
This implementation guide will help you run through the benefits, PDCA Cycle and Annex SL structure in detail for implementing ISO 9001.
To learn more on ISO 9001:2015 visit our page here - https://www.nqa.com/en-gb/certification/standards/iso-9001
ISO 45001:2018 is the world’s first occupational health and safety (OH&S) international standard. This new standard replaces the old OHSAS 18001:2007.
ISO 45001 helps your organization provide a safe and healthy workplace for your employees and other people, prevent deaths, work-related injury and ill-health as well as continually improve OH&S performance.
This ISO 45001 awareness PPT presentation can be used to brief your employees, new hires and potential auditees so as to create awareness of the OH&S standard. Alternatively, the presentation may be used to supplement your materials for the training of OH&S professionals and internal auditors.
It covers the what and why of ISO 45001, the OH&S clause structure, and also offers practical tips on how to handle an audit session. When you are done teaching this material to your employees, they will be much more informed and comfortable with ISO 45001.
LEARNING OBJECTIVES
1. Provide background knowledge on ISO 45001
2. Gain an overview of ISO 45001 structure
3. Understand the ISO 45001 certification process
4. Gather useful tips on handling the audit session
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
Our Team offers a variety of Consulting Services and
Solutions for ISO 9001,14001,18001 and other ISO standard and Product Certification.
We understand that each organization or person is unique. Our Solutions are comprehensive and will be customized to meet your specific needs.
Provides well-planned and stage by stage audit program.
A sound, coherent and non disruptive assessment.
We have an enviable record of customer satisfaction.
ISO 22000:2018 is the newly revised International Food Safety standard, designed to harmonize on a global scale the requirements for food safety management for businesses within the food chain.
ISO 22000 combines and supplements the core elements of ISO 9001 and HACCP to provide an effective framework for the development, implementation, monitorization and continual improvement of a documented Food Safety Management System (FSMS) within the context of the organization’s overall business risks.
This implementation guide will help you run through the benefits, PDCA Cycle and 10 clauses in detail for implementing ISO 22000.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-22000
This PowerPoint slide gives a brief introduction to OHSAS 18001 and is useful for implementing the standard on your organization.
Ravi Shrestha (Nepal)
OHSAS 18001 Training | OHSAS 18001 Implementationhimalya sharma
OHSAS 18001 Implementation Training is conducted by Industry Experts,customized for you & connected with relevance to your Industry,products,services & Process
Similar to NQA ISO 45001 Implementation Guide (20)
Our new Information Security Standards Mapping Tool has been designed to make it easier for your organization to compare the differences between the standards commonly used to manage information and data privacy and security.
The ISO 13485:2016 standard governs quality management for medical devices and related services. It’s published by the International Organization for Standardization (ISO).
Get a free ISO 13485 quote from NQA today here: https://www.nqa.com/en-gb/certification/standards/iso-13485
There are various methods for measuring operational
resilience, some of which are complex, protracted and
involve various disciplines. Yet often the best way is the
simplest way. This method is one of those, and the only
requirement is that you know what you know and what
you don’t know about your organisation.
ISO 22301:2019 "Security and resilience – Business continuity management systems - Requirements" was released in October 2019 and is set to replace ISO 22301:2012 via a three plus-year transition period. All organizations that wish to remain certified to ISO 22301 will need to transition to the 2019 revision of the standard within the set transition period which now ends in April 2023.
Learn more here: https://www.nqa.com/en-gb/transitions/iso-22301-2019
In order to get the most out of your NQA visit, it is wise to spend a few minutes in preparation to make sure that the visit goes smoothly on the day. Read our handy 10 tips!
ISO 13485 is the medical industry's optimal medical device standard, which ensures that all medical devices meet the proper regulatory compliance laws and customer needs. ISO 13485 certification is a valuable credential put in place to keep professionals and customers safe in clinics, hospitals and other medical settings.
ISO 13485:2016 is based on the ISO 9001 process model approach and is a management systems standard specifically developed for the manufacture of medical devices. Its primary objective is to facilitate harmonized medical device regulatory requirements.
This implementation guide will help you run through the benefits and clauses in detail for implementing ISO 13485.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-13485
In the event of an emergency, many businesses and organizations must have the ability to mitigate damage and continue operating. ISO 22301 is the international standard for Business Continuity Management (BCM). Published by the International Organization for Standardization, ISO 22301 is designed to help organizations prevent, prepare for, respond to and recover from unexpected and disruptive incidents.
Use this ISO 22301 checklist to help when implementing a business continuity management system.
We work with many large and small organizations to ensure that information is managed through a risk based approach. Management systems can ensure that information resilience and risk mitigation is a focal point of corporate strategy as well as becoming a part of everyday business practice.
Read about risk assurance in our brochure now!
When your company displays the ISO 27001, your customers will know that you have policies in place to protect their information from today’s big threats.
The 27000 series of certifications cover a variety of information security. You can optimize your time and energy by focusing on just ISO 27001, arguably the best-known and top preparation standard designed to protect your network through an information security management system (ISMS).
Here is a complete guide to ISO 27001. In this guide we will run you through the standard, stages of planning for ISO 27001, the sections for the standard, the certification process and more.
Find out more about ISO 27001 or get a quote for certification here - https://www.nqa.com/en-gb/certification/standards/iso-27001
ISO 50001:2018 is the newly revised international standard for Energy Management providing the most robust framework for optimizing energy efficiency in public and private sector organizations.
ISO 50001 certification demonstrates an organization’s commitment to continual improvement in energy management, allowing them to lead by example within their respective industries and ensure related legislative and regulatory requirements are met.
This implementation guide will help you run through the benefits, PDCA Cycle, Annex SL structure in detail for implementing ISO 50001.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-50001
ISO/IEC 27701:2019 is a data privacy extension to ISO 27001. This newly published information security standard provides guidance for organizations looking to put in place systems to support compliance with GDPR and other data privacy requirements.
ISO 27701, also abbreviated as PIMS (Privacy Information Management System) outlines a framework for Personally Identifiable Information (PII) Controllers and PII Processors to manage data privacy. Privacy information management systems are sometimes referred to as personal information management systems.
This mini implementation guide will help you understand what ISO 27701 is, why you and your organizational might need it and an overview of the extension in the clauses between ISO 27001 and ISO 27701.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-27701
ISO 27001:2013 is the international standard that provides a framework for Information Security Management Systems (ISMS) to provide continued confidentiality, integrity and availability of information as well as legal compliance.
ISO 27001 certification is essential for protecting your most vital assets like employee and client information, brand image and other private information. The ISO standard includes a process-based approach to initiating, implementing, operating and maintaining your ISMS.
This implementation guide will help you run through the benefits, PDCA Cycle and Annex SL structure in detail for implementing ISO 27001.
Find out more or get a quote for certification here – https://www.nqa.com/en-gb/certification/standards/iso-27001
With the help and expertise of our team at NQA, you needn’t be confused by the processes that go into getting certification for your management systems.
In this document, we show your journey to certification in detail starting from submitting a quote form to getting your certification awarded.
This document provides a 10 step guide to approaching Integrated Management Systems.
What are Integrated Management Systems?
An integrated management system is a single system designed to manage multiple aspects of an organization’s operations in line with multiple standards, such as those for quality, environmental and health and safety management.
NQA Can Help Integrate Your Management Systems
NQA has the expertise to help give you the skills to integrate management systems in your organization that will enable you to operate with greater efficiency. Unlike many other certification bodies, we believe in providing our customers with the best value for their money, while delivering impeccable service. Contact us for more information.
Find out more or get a quote for certification here – www.nqa.com
This document provides an overview of the key changes between the 2005 and 2018 version of ISO 22000 – there are several new requirements in addition to changes to key definitions. You will need to prepare for these changes and adapt your food safety management system to meet the new requirements within the transition timeline.
From May 2017, NQA is able to carry out transition audits to the revised medical device standard as a part of your next assessment.
Every organization which wishes to maintain certification to this standard must undergo a transition audit before March 2019 including resolution of any/all non-conformances raised during
the transition audit. To help get you started, the helpful annexes in the new standard have been expanded to give you more detail on where to focus your attention to understand and implement the
required changes. The work required will of course depend on your products/services and the nonapplicable cause specific to your QMS.
ISO 27001:2013 the Information Security Management Standard is one of the fastest growing standards right now; partly due to the ever evolving digital landscape and the recent introduction of the new GDPR.
Similarly to ISO 9001, ISO 27001 is the internationally recognized standard for information security management. It is the most widely used ISMS standard in the world, with over 35k certificates issued to organizations in 178 countries.
What do these standards have in common? And if you have one management system can you have the other?
Certification Body Approach to ISO 9001:2015 by NQANQA
ISO 9001:2015 and ISO 14001:2015 are one year old this month! Here we discuss our experiences and lessons learnt during the first year of assessments to the 2015 standards.
Implementing ISO 50001 at the London School of EconomicsNQA
London School of Economics Sustainability Manager, Elena Rivilla Lutterkort, presented her journey to ISO 50001 and ESOS compliance with NQA at the Energy Institute’s Environmental Efficiency Conference on Wed 13 Jan 2016, London.
Elena used an ISO 14001 to ISO 50001 Gap Guide to progress to compliance. Visit www.nqa.com/iso50001 to find the NQA ISO 14001 to ISO 50001 Gap Analysis download.
Courier & Package Tracking System Actually WorksIn Targos
In the world of modern logistics, the courier and package tracking system stands as a pivotal tool, offering transparency and efficiency throughout the shipping process. Let’s delve into the intricacies of courier and package tracking systems and explore how INTARGOS plays a key role in this domain.
Comprehensive Water Damage Restoration Serviceskleenupdisaster
Find out how Disaster Kleenup's professional water damage restoration services can quickly and efficiently restore your property. Find more about our advanced techniques and quick action plans. Visit here: https://iddk.com/disaster-cleanup-services/flood-damage/
Looking for the Reliable Logistics Solutions in India? Discover unparalleled efficiency and reliability with our top-rated logistics services. We specialize in streamlining supply chains, ensuring timely deliveries, and providing cutting-edge tracking solutions. Our platform caters to businesses of all sizes, offering customizable logistics solutions to meet your unique needs. With a focus on innovation and customer satisfaction, we are your trusted partner in navigating the complexities of logistics in India. Choose us for seamless, cost-effective, and scalable logistics solutions. Experience the best in Indian logistics with our expert team by your side.
Upvc Bathroom Doors Price and Designs In Keralabpshafeeque
UPVC Bathroom Doors Price in Kerala
When renovating or designing a bathroom, the choice of doors plays a pivotal role in ensuring both functionality and aesthetics. In Kerala, UPVC (Unplasticized Polyvinyl Chloride) bathroom doors have gained popularity for their durability, water resistance, and modern designs. This article delves into the pricing of UPVC bathroom doors in Kerala and why they are a preferred choice for homeowners.
#### Benefits of UPVC Bathroom Doors
UPVC bathroom doors offer several advantages, making them an ideal choice for the humid climate of Kerala:
1. **Water Resistance**: Unlike wooden doors, UPVC doors do not swell or warp when exposed to moisture, making them perfect for bathrooms.
2. **Durability**: These doors are resistant to termites and corrosion, ensuring a long lifespan.
3. **Low Maintenance**: UPVC doors require minimal upkeep, saving homeowners time and effort.
4. **Energy Efficiency**: They provide good insulation, helping maintain a comfortable bathroom temperature and reducing energy costs.
5. **Aesthetic Variety**: Available in various colors and designs, UPVC doors can complement any bathroom decor, from modern to traditional.
#### Price Range of UPVC Bathroom Doors in Kerala
The cost of UPVC bathroom doors in Kerala varies depending on factors such as size, design, and additional features. Here's a general overview of the price range:
- **Basic Models**: Simple UPVC bathroom doors start from ₹2,500 to ₹5,000. These doors are functional and offer essential benefits like water resistance and durability.
- **Mid-Range Models**: For more intricate designs or additional features such as frosted glass panels or metallic handles, prices range between ₹5,000 and ₹10,000.
- **Premium Models**: High-end UPVC bathroom doors, which may include custom designs, advanced locking systems, and superior finishes, can cost anywhere from ₹10,000 to ₹20,000 or more.
#### Conclusion
UPVC bathroom doors are an excellent investment for homes in Kerala, offering a blend of practicality and style. With a wide range of prices and designs available, homeowners can easily find a UPVC door that fits their budget and enhances their bathroom’s aesthetic appeal. When choosing a UPVC bathroom door, consider the specific needs of your space and the long-term benefits these doors provide. Investing in a quality UPVC bathroom door ensures a durable, low-maintenance, and stylish addition to your home.
Office Business Furnishings | Office EquipmentOFWD
OFWD is Edmonton’s Newest and most cost-effective source for Office Furnishings. Conveniently located on 170 street and 114 Avenue in Edmonton’s West End. We take pride in servicing a client base of over 500 corporations throughout the Edmonton and Alberta area. OFWD is in the business of satisfying the home or corporate office environment needs of our clients, from individual pieces of furniture for the home user to the implementation of complete turn-key projects on much larger scales. We supply only quality products from reputable manufacturers. It is our intention to continue to earn the trust of our clients by dealing with honesty and integrity and by providing service and after sales follow-up second to none.
What Are the Latest Trends in Endpoint Security for 2024?VRS Technologies
In this PDF, Discover the top 2024 endpoint security trends, including zero trust, AI integration, XDR, cloud security, and enhanced mobile protection. VRS Technologies LLC supplies the top level Endpoint Security Service Dubai. For More Info Contact us: +971 56 7029840 Visit us: https://www.vrstech.com/endpoint-security-solutions.html
Are Seamless Gutters Worth It? Explore nowacadiaborton
Seamless gutters live up to their name: they are uncomplicated gutters that flow freely without needless joins or seams. They do have seams, but they are limited to the downspouts and corners. Painted metal is used to make seamless gutters. If you're wondering why seamless gutters could be preferable to traditional ones, keep reading this ppt for the advantages.
SMS2ORBIT | launched in 2022 in Mumbai's Andheri area, aims to be the most reliable Bulk SMS Service Provider in Mumbai.
If More Information About The SMS Service Provided By SMS2ORBIT Is Desired, Please Don’t Hesitate To Contact The Business Team. They Can Be Reached At
business@sms2orbit.com Or By Calling 97248 55877.
BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem sol...gitapress3
TOP No AsTro 1 black magic SpecialiSt UK baba ji +91-9463629203 VashIkaRan blaCk maGiC specialist in uSA Uk England Luxembourg CanAdA America BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem solution Uk USA america england LonDon Divorce problem solution astroloGer
A Bulgarian work permit is valid for up to one year, after which it can be renewed as long as the conditions of employment have not changed. After obtaining a work permit, the employee will need to apply for a Type D visa at the Bulgarian embassy or consulate in their country. Urgent requirement for Bulgaria 🇧🇬🇧🇬work D Category National Permit Visa ( Indian /Nepali Nationality only) Visa Validity - 3 to 6 months on renewables basis. Job category - General worker/ Helper Salary - 800 Euro @ 8 hrs.+ Over time extra Age- 20- 40 years Total processing time -4-5 Months
BesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand...gitapress3
love problem solution astrologer
best love problem solution astrologer
online love problem solution astrologer
love problem solution astrologer in india
love problem solution astrologer in kolkata
love problem solution astrologer near me
love problem solution astrologer in ludhiana
love problem solution astrologer acharya ji
love problem solution astrologer in delhi
love problem solution astrologer amritsar
astrologer love problem solution
astrologer for love problem
astrology love problem solution
love solution astrologer
love problem solution specialist astrologer
love problem solution by astrologer
astrology love problem solution baba ji
love problem solve astrologer
love problem solution usa
love problem solution expert astrologer
astrologer for love marriage problem solution
love problem solution astrologer in mumbai
love problem solution muslim astrologer
love marriage specialist astrologer problem solution
famous love astrologer
love problem solution astrologer specialist
love problem solution astrologer tantrikBesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand baba ji LoVe marriage specialist Uk USA LonDOn panDit ji
Are Gutters Necessary? Explore the details now!AmeliaLauren3
Gutters are typically installed at a slight downward slope to allow water to flow freely towards downspouts or drains – the downspout being the vertical pipe attached to the gutters. The water is subsequently transported by the downspout to either the ground or an underground drainage system. Maintaining a gutter system that is free of blockages and functional requires regular maintenance.
But, many wonder in what situations gutters are required and not required. In this ppt we will discuss in detail the matter, ‘Are Gutters Necessary?’
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxamilabibi1
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docx
Colors of Wall Paint and Their Mentally Properties.pptxBrendon Jonathan
Discover how different wall paint colors can influence your mood and mental well-being. Learn the psychological effects of colors and find the perfect hue for every room in your home.
Unlock the potential of Ruby on Rails for your next project. Hire RoR Developers from Semiosis for scalable and efficient web solutions. With expertise in RoR development, our team crafts robust applications to meet your business goals. Dial +1 9177322215 to collaborate with us and elevate your online presence.
Don't Wait Until It's Too Late! 5-Signs Your Garage Door Needs ReplacingCR Garage Doors
This infographic unveils the 5 telltale signs your garage door needs a replacement. Avoid costly repairs and upgrade to a modern, secure, and silent entryway. Visit our website for more information about garage door replacement.
Website-> https://cr-garagedoors.com/
Elevate Your Brand with Digital Marketing for Fashion IndustryMatebiz Pvt. Ltd
Matebiz Pvt. Ltd. specializes in providing cutting-edge digital marketing for Fashion Industry. Our comprehensive strategies ensure that your brand stands out in the competitive fashion landscape. From targeted social media campaigns to search engine optimization tailored for fashion keywords, we cover it all. With a deep understanding of industry trends and consumer behavior, we craft compelling content and engaging visuals to enhance your online presence. Trust Matebiz Pvt. Ltd. to elevate your fashion brand through strategic digital marketing initiatives.
DOJO Training Center - Empowering Workforce ExcellenceHimanshu
The document delves into DOJO training, an immersive offline training concept designed to educate both new hires and existing staff. This method follows an organized eight-step process within a simulated work setting. The steps encompass safety protocols, behavioral coaching, product familiarity, production guidelines, and procedural understanding. Trainees acquire skills through hands-on simulations and rehearsal prior to transitioning to actual shop floor duties under supervision. The primary aim is to minimize accidents and defects by ensuring employees undergo comprehensive training, preparing them effectively for their job roles.
2. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE2
> ISO 45001:2018
OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE
*UK and Ireland only
3. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 3
Contents
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 3
Contents
Introduction to the standard P04
Benefits of implementation P06
PDCA cycle P07
Risk based thinking / audits P08
Annex SL P09
SECTION 1: Scope P10
SECTION 2: Normative references P11
SECTION 3: Terms of definition P12
SECTION 4: Context of organization P14
SECTION 5: Leadership P16
SECTION 6: Planning P18
SECTION 7: Support P20
SECTION 8: Operation P22
SECTION 9: Performance evaluation P24
SECTION 10: Improvement P28
Get the most from your management P30
Next steps once implemented P32
How else can we assist P33
4. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE4
INTRODUCTION
TO THE STANDARD
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE4
ISO 45001:2018 is a new International
standard which provides a framework,
regardless of size, activity and geographical
location, to manage and continuously
improve Occupational Health and Safety
(OH&S) within the organization.
The risk-based approach standard introduces
the common ‘Annex SL’ structure which provides
compatibility with other ISO standards including ISO
9001 Quality, ISO 14001 Environment and ISO 27001
Information Security management systems.
By adopting a systematic approach including worker
participation, the organization can integrate OH&S
within its business processes which will contribute
to prevention of accidents and long and short term
ill health effects. The standard provides a platform to
develop a positive safety culture leading to worker
wellbeing.
Once the policy framework has been put in place,
along with processes to facilitate the organization’s
commitment, the standard then asks the organization
to audit, review and improve the system including
assessment of compliance obligations. This
approach provides the organization with both
assurance and business continuity.
Standard requirements can significantly help the
organization improve internally; by embedding a
culture of challenge and continual improvement.
5. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 5
OHSAS 18001:2007 (initial
version OHSAS 18001:1999) is
the predecessor to the recently
released ISO standard ISO
45001:2018. The OHSAS standard
was recognised internationally but
it is not an ISO standard.
Over time it has become increasingly
apparent that too many workers are
suffering from OHS related illnesses,
injuries and deaths, placing an
unacceptable burden on people, their
families and with moral and welfare
costs to society overall.
This was recognised and hence the
need to have a systematic structure for
the management of the activities. ISO
45001:2018 is an ISO standard and
has been designed to have greater
compatibility with existing ISO standard
management system revisions including
ISO 9001:2015 and ISO 14001:2015.
It uses the same management system
structure and reflects the requirements
identified by the International Labour
Organization guidance for OHS
systems. It has been developed over a
number of years by International bodies
and industry experts.
Owing to this compatibility ISO
45001:2018 should build on all the
success of OHSAS 18001 and allow the
benefits to be enhanced and potentially
integrated in other generic management
system standards.
In 2021 OHSAS 18001 will be
withdrawn leaving ISO 45001 the
primary international OHS management
system standard.
A Brief history of ISO 45001
6. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE6
BENEFITS OF
IMPLEMENTATION
With or without a formal OH&S management system, organizations have a moral and legal
duty to protect workers from accidents and ill health. This next section provides an overview
of a selection of positive benefits from implementation of ISO 45001. These positive benefits
are not exhaustive.
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE6
Adoption of the high-level structure of ‘Annex
SL’ enables organizations to integrate ISO
45001 with existing ISO 9001 Quality and
ISO14001 Environmental management
systems. This approach has reduced the
complexity of multiple clause requirements
across different standards applications, saving
time and resources.
The standard provides a systematic approach
for senior leadership to assess OH&S risk
and opportunities, monitor and review
safety performance and set objectives for
continual improvement within the ‘context’ of
organizational activities. This may include, for
example, worker health promotion campaigns
or the monitoring of the OH&S effects of
products and services provided.
Implementation is a demonstration and
commitment from senior leadership to internal
and external stakeholders (interested parties)
of the intent to protect workers from accidents
including short and long term ill health effects.
Of course, this may in-turn reduce downtime,
lead to reduction or prevention of worker loss
time hours and potential prosecution.
This commitment also provides assurances to
the Board of Directors, Trustees or owners that
management controls regarding OH&S risks
inherent within the organization.
The standard promotes worker participation
when identifying hazards, elimination or
reducing risk by implementation of controls
integrated with other business process. This
approach can improve safety culture, minimise
risk and embed best practice resulting in
increased productivity.
In addition to internal process controls,
the standard has provided requirements to
assess procurement of products and services
which may have influences on OH&S. For
example, risk based structured management of
contractors. Such a process can in-turn provide
controls to reduce both OH&S risk, promote
positive safety culture and protect business.
The standard provides a structure to monitor
and review compliance obligations to ensure
the organization is legally compliant including
products and services. It is important for an
organization to understand what it is to achieve,
why it needs to achieve and if it has achieved –
this should be demonstrated within the system.
Both internal and external audit programmes
provide scrutiny and effectiveness of the OH&S
management system including processes. The
programme promotes communication and
participation of workers with identification of
gaps leading to continuous improvement.
With an emphasis on workers taking an active
role in OH&S matters, this can have positive
benefits on an organization’s reputation as a
safe place to work leading to staff retention,
motivation and greater productivity.
Implementation is also recognition for having
achieved an international standard benchmark
which may have positive influence on existing
and potential customers in fulfilling their own
social responsibility commitments.
For further information on positive benefits of ISO 45001 standard implementation and its intended
outcome refer to section 1 ‘Scope’.
7. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 7ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 7
PDCA CYCLE
Establish OH&S objectives, processes and resources required to deliver results in accordance with the organizations
OH&S Policy
Plan:
Understand the context of the
organization including OH&S
risk and opportunities. Establish
OH&S objectives, processes and
resources required to deliver
results in accordance with the
organizations OH&S Policy.
Do:
Implement the
processes as
planned to including
worker participation,
hazard identification
and emergency
preparedness.
Check:
Monitor, measure
and evaluate OH&S
activities and
processes.
Act:
Take actions to
continually improve to
including findings of
incidents, addressing
non-conformance and
audit findings.
ISO 45001 has adopted the four stage Plan-Do-Check-Act (PDCA) cycle for achieving continual
improvement. This is an inherent part of the systematic approach to determine workable
solutions, assessing the results, and implementing ones that have been shown to work.
The PDCA cycle can be applied not only to management systems as a whole, but also to each individual element to provide an
ongoing focus on continual improvement. At the core of each stage is ‘Top Management’ who are pivotal to ensure the OH&S
system is managed effectively.
In the context of ISO 45001, refer to the following PDCA cycle:
SUPPORT &
OPERATION
(7, 8)
LEADER
& WORKER
PARTICIPATION
(5)
IMPROVEMENT
(10)
PLANNING
(6)
PERFORMANCE
EVALUATION
(9)
Plan Do
Act Check
SCOPE OF THE OH&S MANAGEMENT SYSTEM (4.3/4.4)
INTENDED
OUTCOMES
OF THE
OH&S MS
CONTEXT OF THE
ORGANIZATION
(4)
INTERNAL &
EXTERNAL ISSUES
(4.1)
NEEDS AND
EXPECTATIONS
OF RELEVANT
INTERESTED
PARTIES (4.2)
DO:
Implement the processes as planned
to include worker participation, hazard
identification and emergency preparedness.
CHECK:
Monitor, measure and
evaluate OH&S activities
and processes.
ACT:
Take actions to continually improve to
including findings of incidents, addressing
non-conformance and audit findings.
8. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE8
RISK BASED
THINKING/AUDITS
Risk Based Thinking
Risk Based Thinking (RBT) is a central tenet of ISO 45001.
RBT requires the Management Team to continually assess the
issues that affect OH&S aspects of an organization and ensure
that appropriate targets, resources and controls are in place.
RBT empowers organizations to make dynamic changes to
their objectives and focus, whilst at the same time ensuring
that resources are in place to control changes and unforeseen
circumstances. In relation to OH&S, risk-based thinking extends
to areas outside of the organization which may influence safety.
For example, procurement of products and services (including
contractors) and the impact of supplied products and services.
The organization must determine the methodology for risk-based
thinking with consideration of compliance obligations and the
participation of workers. For operational aspects the standard
clearly defines the hierarchy of control for hazard identification
and the reduction of risks with the involvement of workers. This
methodology requires the organization to reduce risks associated
with hazards to a reasonably practicable level.
1st Party - Internal Audit
Internal audits are taken at a moment in time to determine if
policies and practices are effective and achieving the intended
aim. The internal audit is an opportunity to engage with workers
and to capture a true reflection of processes. Audits may identify
positive evidence of conformity including compliance obligations,
however through inspection and observation they may identify
improvement opportunities and non-compliance in breach of the
management standard.
Audit Planning
Developing an audit plan does not have to be a complicated
process. Through risk based thinking a series of audits can
be scheduled to focus areas of higher risk and to engage
with identified groups of workers. It’s up to the organization to
determine the frequency provided it is defined. In addition to
operational aspects the plan will cover core processes
including compliance obligations, management review and
documented information.
Walk Through Audits
A less formal approach maybe adopted in addition to the audit
plan by conducting ‘walk through’ audits. This may be conducted
by senior leadership or at operational level to inspect areas of
the organization to pre-determined questions. This is a further
opportunity to engage with workers, promote communication and
build a positive safety culture within the organization.
2nd Party - External Audits
Second party audits are usually conducted by customers or
organizations on their behalf, however they may be conducted
by regulators to ensure the organization complies with legal
requirements. External audits are a useful way to substantiate an
organization OH&S claim and to gather first-hand information and
contact with workers prior to commitment to a formal business
relationship. Second party audits may be planned; however,
notice may not be provided from regulators emphasising the
requirement to ensure OH&S organizational requirements
are prepared.
3rd Party - Certification Audits
Third party audits are conducted by UKAS accredited certification
bodies such as NQA in compliance of the ISO 45001 OH&S
standard. Depending on the number of employees, sites, risk
and complexity of the organization, the certification body will
determine the number of audit days required to cover the full
scope of the standard. Prior to certification, the organization
may consider a gap analysis conducted by either consultant or
certification body to identify gaps against the OH&S standard.
Any company that operates an OH&S management system must ensure there are effective
measures to evaluate performance which enables continual improvement internally. This section
outlines the different methodologies of auditing in relation to the OH&S system to ensure it is
effective at all levels of the organization and meets the requirements of the standard.
Certification is a demonstration to interested parties
including workers, customers and regulators that
there is:
• A mechanism for regular assessment to monitor and
implement compliance obligations
• Regular assessment to monitor and improve
OH&S processes
• Identification of hazards and reduce OH&S risk
• Regular review and assessment of OH&S risk
and opportunities
• Worker participation in the decision-making process
to ensure a safe working environment, continuous
improvement and safety culture
9. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 9
ANNEX SL
Prior to the introduction of Annex SL (previously known as ISO Guide 83), organizations who
implemented ISO 9001 Quality, ISO 14001 Environmental and ISO 27001 Information Security
standards had difficulty integrating management systems. Based on different clause structures
and terms of definition, the absence of Annex SL could lead to potential gaps between
management systems an unnecessary burden on resources. The introduction of Annex SL
including ISO 45001 has enabled multiple standards to adopt the same high-level structure to
harmonise 10 core clauses, making it easier to integrate common management standards.
High Level Structure
Annex SL consists of 10
core clauses:
1. Scope
2. Normative references
3. Terms of definition
4. Context of organization
5. Leadership
6. Planning
7. Support
8. Emergency preparedness
9. Performance evaluation
10. Improvement
The first three clauses provide a background to the standard with
useful information including terms of definition. The rationale of
‘Context of the Organization’ (clause 4) is that the system focuses on
processes and requirements needed to achieve organizational policy
objectives. This is achieved by understanding the organization and
the context in which it operates. The Clause sets out the requirements
for the organization to define the ‘Scope’ of the system, and the
subsequent planning of the system.
Clause 5 to 10 are common to all management system standards, ISO
45001 specifically relates to occupational health and safety issues.
So, whilst there is commonality, there are OH&S processes to be
established, implemented and maintained including understanding
of the policy framework, identification of hazards, management
control of risks and worker participation. A successfully deployed
Annex SL enables an integrated management system (IMS) which
simultaneously handles the requirements of ISO 45001, ISO 9001 and
ISO 14001. Typically, this would include a harmonised documented
information, procurement, audit and management review process
without the necessity of duplication.
7.1 Resources
7.2 Competence
7.3 Awareness
7.4
Communication
7.5 Documented
information
4.1
Understanding
the organization
and its context
4.2
Understanding
the needs and
expectations of
workers and
other interested
parties
4.3 Determining
the scope of
the ISO 45001
management
system
4.4 ISO 45001
management
system
5.1 Leadership
commitment
5.2 Policy
6.1 Actions to
address risks and
opportunities
5.3
Organizational
roles,
responsibilities
and authorities
6.2 ISO 45001
objectives and
planning to
achieve them
8.1 Operational
planning and
control
8.2 Emergency
preparedness
9.1 Monitoring,
measurement,
analysis and
evaluation
9.2
Internal audit
9.3
Management
review
10.1
Nonconformity
and corrective
action
10.2 Continual
improvement
PLAN DO CHECK ACT
4
Context of the
organization
5
Leadership
6
Planning
7
Support
8
Operations
9
Performance
evaluation
10
Improvement
Annex SL Clause Overview
10. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE10 ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE10
SECTION 1:
SCOPE
The intended outcome of the OH&S management system is for the organization to:
• Provide a safe and healthy workplace(s)
• Prevent work related injury and / or ill health
• Proactively monitor and improve OH&S performance
• Eliminate hazards and minimise OH&S risks (including system deficiencies)
• Take advantage of OH&S opportunities and address management system non-conformities associated with its activities
• Fulfil legal and other requirements
• Achieve OH&S objectives
• Integrate other aspects of health and safety including worker wellness / wellbeing
This section makes it clear that the standard does not address issues such as product safety, property damage or environmental
impacts beyond the risks they present to workers and other relevant interested parties.
For registration all clause requirements must be applied. This section sets the intent and
parameters within which the ISO 45001 OH&S management standard can be used to attain
its intended outcome.
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE10
11. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 11
SECTION 2:
NORMATIVE
REFERENCES
If applicable to a standard, normative references are essential
documents used for the application of the document. In other
words, the reference document is considered essential for the
application of the referenced standard.
ISO 45001 provides a bibliography with further information
including associated ISO management standards.
Reference to ‘normative references’ are common across all management system standards
however in the case of ISO 45001 there are no normative references.
12. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE12
It is highly recommended that persons responsible for
implementation of the standard clarify and have a clear
understanding of words described in this section.
For example, ‘worker’ may be interpreted without guidance as
an operator who works in a factory, when in reality a worker
covers many different occupational aspects including agency,
contractors, all employees including Top Management and
external provider staff.
Each term is listed in accordance with the hierarchy of
concepts reflecting the sequencing of the introduction of
the standard.
In addition to the term or definition, notes provide further
information and clarity.
If an electronic version of the standard has been purchased
the definitions are hyperlinked to other definitions so that their
interrelationships can be seen.
Annex A Guidance
‘Annex A’ of the standard provides useful clarification
of selected concepts in relation to OH&S to avoid
misunderstanding. Concepts including:
• Continual
• Ensure
• Interested party
• Documented information
If the organization requires the use of specific industry
related terms and their meanings relative to the OH&S
system, these terms can be used, however they must
still conform to the ISO 45001 document.
SECTION 3:
TERMS AND
DEFINITIONS
ISO standards are written in such a way that their meaning can be open to interpretation. As
with all standards, this interpretation can lead to confusion. To assist the user section 3 of
the standard provides prescriptive terms of definition to prevent the wrong interpretation.
13. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 13ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 13
14. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE14
SECTION 4:
CONTEXT OF THE
ORGANIZATION
Understanding the context of the organization is usually
conducted by senior leadership with information about
the business and activities gathered at every level of the
organization. Discussion points focus on internal and external
issues which have an impact on the OH&S system.
Clause 4 has four sub-clauses that each set out an element of
what is needed to define the Context of the Organization, and to
design the OH&S management system.
These four requirements follow a sequence:
• In 4.1: Clarification of the strategic aims of the organization
and determine any issues that could affect these aims
being achieved.
• In 4.2: Consideration of the interested parties (Stakeholders)
including workers to the organization and how they can affect
how the organization operates.
• In 4.3: Setting the scope of the OH&S Management System
from the information discussed and considered in 4.1 and 4.2
• In 4.4: Laying out a design for the OH&S management system
and the high-level planning around it
The rationale of this clause is that the system focuses on the processes and requirements needed to
achieve the OH&S policy objectives. This can be achieved by understanding the organization and the
‘context’ in which it operates. Clause 4 also sets out the requirements for the ‘Scope’ and the system
to be defined, and the subsequent high-level planning of the system to achieve the objectives.
4.1 Understanding of the organization and context
Clause 4.1 requires the provision of a high-level understanding of key issues that can affect OH&S both positively and negatively
within the organization. Using this information will help develop an understanding of internal and external issues and the
interaction of activities to help plan and develop controls within the system.
External issues
• Cultural, social, political, legal, financial, technological,
economic and natural surroundings including the
environment in which the organization operates
• Who the competitors are and any contractors,
subcontractors, suppliers, partners and providers
• National and international law
• Industry drivers and trends which have influence on the
organization
• The organization products and services and their influence
on occupational health and safety
Internal issues
• Governance, organizational structure, roles and
accountabilities
• Policies, objectives and the strategies in place to achieve
them
• Resources (including human), knowledge and competence
• OH&S culture within the organization and the relationship
with workers
• Process for the introduction of new products, materials,
services, tools, software, premises and equipment
• Working conditions
WHAT ARE INTERNAL AND EXTERNAL ISSUES?
Internal and external issues are circumstances, characteristics and changes which can positively or negatively influence the
OH&S management system. ‘Annex A’ of the standard has been developed to provide examples of internal and external
issues. Below are typical examples, however each issue will be focused on the individual organization:
With the information that is gathered during discussions at all levels of the organization to determine context, it is
recommended this information is placed into a report. The benefit of this is it provides a cohesive explanation and a good
reference to support present and future business strategy. (For review of context refer to section 9).
Clause 4.3
Scope what you want to
include in the system
Clause 4.1
Define the organization and
what can affect it
Clause 4.2
Understand the needs and
expectations of workers and
other interested parties
Clause 4.4
Design the sequence
of processes
15. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 15
4.3 Determining the scope of
the OH&S management system
From the context information gathered in 4.1 and
understanding of needs and expectations of workers and
interested parties in 4.2 the ‘scope’ can be developed.
The Scope sets out the areas of the business that are going to
be managed in the OH&S Management System.
Usually, this will include the key processes and activities that
are engaged in the service or production of goods, including
any customer facing activity and post-delivery warranty work.
Where an organization is complex, the scope is used to ring-
fence only the activities or locations where the system is being
used. This can be referred to as ‘boundaries of applicability’.
However, areas of the business cannot be excluded from the
scope to avoid OH&S processes or evade legal compliance.
When the application to NQA is made to have the system
audited for certification, it is necessary to declare the scope in
a statement. This will ensure that they send the correct auditor
with experience in your industry sector. For example:
‘The Manufacture and Sales of Dishwashers’
Using this example, you can see that the main process
is manufacturing which will incorporate many processes
including workers, machinery, regulatory requirements,
external providers, customers (end users) and competence
which will be audited.
4.4 OH&S management system
From the information gathered in 4.1, 4.2 and 4.3 the standard
requires the design and integration of processes within the
management system to satisfy the requirements of ISO 45001.
This may include such processes as design and development,
procurement, marketing and manufacturing.
4.2 Understanding
the needs and
expectations of
workers and other
interested parties
‘Interested parties’ is the
preferred term introduced by ISO
however commonly referred to as
‘Stakeholders’. Unlike other common
standards this clause introduces
the term ‘Workers’ which is a broad
term as described in section 3 of the
standard ‘Terms and definitions’.
This section requires the
determination of, in addition to
workers, interested parties that
can influence OH&S positively
and negatively. Once it has been
decided which interested parties are
relevant and significant, their needs
and expectations within the OH&S
management system should be
addressed.
Remember when considering
interested parties, some needs and
expectations are mandatory and
incorporated into law and regulatory
requirements therefore must be
considered.
Having defined who your Interested
Parties are, ISO 45001 requires that
you determine their potential and
actual effects.
Interested parties can be documented in the form of a map:
INSURERS
GEOGRAPHICAL
LOCATION
CUSTOMERS
REGULATORS SUPPLIERS
EMERGENCY
SERVICES
CONTRACTORS 3RD PARTIES
WORKERS
16. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE16
SECTION 5:
LEADERSHIP
This section provides the tone and expectation on senior
leadership to take an active part in the OH&S system and
generation of a positive health and safety culture within the
organization.
The following are examples of how leadership can be
demonstrated within the OH&S management system:
• Take overall responsibility and accountability for the
prevention of work related injury / ill health, as well as the
provision of a safe and healthy work environment
• Facilitating positive culture and continual improvement
• Ensure the OH&S system is integrated within business
processes
• Promote communication internally and externally and at all
levels (cascading from the top)
• Protect workers from reprisal when reporting incidents,
hazards, risk and opportunities
• Provision and support for safety committees
For an external audit the expectation is for senior leadership to
be at the heart of the OH&S management system with a clear
demonstration of understanding the system.
OH&S Policy
An OH&S Policy is a ‘Statement of Intent’ or ‘Mission
Statement’ which sets out the framework to manage the
Occupational Health and Safety Management System. The
OH&S policy is approved by senior leadership and will drive
the controls that are in place and the actions that are carried
out to improve it.
The standard specifically requires that the OH&S policy
should include commitments to:
• Provide a framework for setting objectives
• Provide safe and healthy working conditions for the
prevention of work related injury and / or ill health
• Eliminate hazards and reduce OH&S risks
• Continual improvement of the OH&S system
• Consultation and participation of workers and where they
exist worker representatives
• Fulfilment of legal and other requirements
Once the OH&S policy has been approved it must be
communicated to stakeholders including workers. The policy
must be available to interested parties, which will include
customers and external providers on request.
In addition, periodically the OH&S policy must be reviewed by
senior leadership to ensure it remains applicable to the context
of your organization.
Critical to the success of the OH&S management system is leadership and commitment
from ‘Top Management’. The expectation on leaders within an organization is to become
champions of the system and provide the necessary resources to protect workers from harm.
17. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 17ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 17
Organizational roles,
responsibilities and authorities
This section requires the organization to define clear roles,
responsibilities and authorities throughout the organization.
It is recognised that overall responsibility for the OH&S
management system falls to ‘Top Management’ however
individuals must take account of their own health and safety
and that of others.
Consider documenting roles, responsibilities and authorities
within high-level and localised organizational charts. Individual
policies and work instructions may also include responsibility
and authority however competence must be considered.
Consultation and participation
of workers
A key factor for the success of an OH&S system is to ensure
there are clear lines of communication, consultation and
participation of workers with sufficient allocation of time
and resources. This section requires the development of
processes to ensure information that has an impact on OH&S
is communicated at all levels of the organization.
This can be achieved in many different ways depending on the
scope and scale of your organization.
Here is a selection of suggested methods of promoting
consultation and participation of workers:
• Periodic meetings with senior leadership to discuss
processes including OH&S issues
• Safety committee with worker representatives
(where required)
• Identification and elimination of hazards (risk assessments)
• Development of training Tool Box Talks and presentations
(This may include training tools for workers outside of your
organization such as visiting contractors)
• Development of Safe Systems of Work and Work Instructions
• Cross communication between sites within the organization
• Near miss reporting schemes with follow up actions
including root cause analysis
• Site tours
• Open door policy to talk to a safety or HR representative
• OH&S suggestion boxes
• Communication – Notice boards, newsletters, email, blogs,
health promotion campaigns
Once a selection of methods of consultation and participation
of workers has been chosen, consider documenting the
methodologies within a process. This will enable the
organization to periodically check the process within your audit
programme to ensure any identified requirements have
been fulfilled.
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 17
18. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE18
SECTION 6:
PLANNING
Planning occurs at several points in the framework for OH&S
management system. In order to set out the management
system planning is required using information gathered in
clause 4. At various points in time there will be the need to
‘plan’ again; this includes the periodic planning for achieving
objectives that are set and reviewed, and also in the event of a
‘change’ which could arise from a planned or unplanned event.
The requirements are to:
• Plan the actions based on risk assessment to manage risks
and opportunities in the prevention of undesired effects
including work related injury or ill health
• Manage events and continually determine risk and
opportunities for both workers and the OH&S system
• Establish and manage objectives
• Plan and manage changes to the system and re-evaluate
once change has been made
• Consider relationships and interactions between activities
• Define a methodology for hazard identification
• Define the methodology for identification and management
of legal and other requirements
• Understand the knowledge within the organization to
manage activities safely
Hazard Identification
Hazard identification is fundamental in the planning process to
prioritise actions to address risks and opportunities. Using the
‘Hierarchy of Controls’ (see illustration opposite) the standard
requires the organization to conduct risk assessment based
on internal and external activities. Hazard identification will
enable the organization to recognise and understand hazards
in the workplace. It will also allow workers to assess, prioritise
and eliminate hazards or to reduce OH&S risks. Hazards
can appear in many different circumstances and conditions
including physical, chemical, biological, psychosocial,
physiological, mechanical, electrical, or those based on
movement and energy.
Consideration must also be given to the types of activity
including the following:
• Groups of workers exposed to the hazard
• Shift work, hours of activity, lone working, supervision
• Human factors including demanding physical activities
• Design of the workplace, for example segregation of traffic
and pedestrian routes
• Changes in work pattern including increase or decrease
in productivity
• Noise, cold, heat
• Legal requirements and mechanism to adapt to changes in
legal requirements
• How the risk assessment will be communicated and
subsequent worker training of control measures
• Emergency situations such as unplanned events including
fire and loss of power
• Availability of resources to ensure hierarchy of controls can
be applied to risk assessment findings
Using the hierarchy of controls, the organization needs to
determine the methodology in which the findings are recorded
as documented information and communicated to workers and
other interested parties. Typically, the competent person would
conduct a risk assessment and score the findings based on
the likelihood of the event based on the severity of harm with
an applied risk score. This methodology would be consistently
applied and be based on the legal / regulatory requirement,
type and circumstances of the activity, I.e. noise, fire, vibration,
height risk assessment etc.
It is recommended that risk assessment conducted by a
competent person(s) starts at the design phase of any activity
and involves the workers who are or will be directly involved in
the process.
Planning is one of the key components of any management system. ISO 45001 is based on
the ‘Plan-Do-Check-Act’ cycle, where planning is used to set the actions in motion for how the
system will work.
Hierarchy of Controls
Least Effective
Most Effective
Physically remove
the hazard
Replace the
hazard
Isolate people
from the hazard
Change the way
people work
Protect the worker
with Personal
Protective
Equipment
Elimination
Administrative
Controls
Engineering
Controls
Substitution
PPE
19. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 19
Determination of legal and
other requirements
The organization needs to be confident that during the risk
assessment process it is adhering to the latest applicable legal
and other requirements. The legal and other requirements
process of assessment will vary depending on the complexity
of the business.
Sources of information may be gathered in many
ways including:
• Subscription to publisher legal update newsletters
• Membership of trade associations
• Research via reputable government websites
• Use of competent consultants
• Competent employee membership of occupational health
and safety institutes
• Employee attendance of occupational health and safety
training courses
Following the initial assessment of compliance obligations, the
organization may consider placing the relevant information in a
document. A spreadsheet may be useful for this purpose.
A live document may include the following information and
be referenced within individual risk assessments:
• Name and reference number of regulation / requirement
• Revision status
• Date the regulation was last reviewed
• Competent person responsible for reviewing the requirement
• Area of the organization the requirement impacts including
a short description of activity and associated documented
information
• A hyperlink or description of the source of information
• Name and customer / external provider contact details if
relevant to ‘other requirement’
• Next review date
Planning Action
Following the hazard identification process, the organization
should plan actions in order of priority to reduce risk. These
should consider the consequences of these actions before
the actions are introduced. Planning actions and including the
introduction of control measures must be within the framework
of the OH&S management system.
Control measures may be either integrated into existing quality
system work instructions or based on risk and developed into
a dedicated Safe Systems of Work. Tasks may be delegated
by senior leadership individually or as a collective group.
Tasks will be allocated to persons based on competency
with consideration as to how any training will be delivered to
different groups of workers.
Objectives
It is a requirement of the standard to set achievable OH&S
objectives with the means to periodically measure progress,
demonstrating continuous improvement. Often objectives are
set and reviewed at management review (see clause 9.3) or
locally at departmental or committee meetings. Once set, there
must be the means to communicate objectives throughout the
organization to support and generate a positive OH&S culture.
If many requirements have been identified the organization
may consider developing a documented Occupational Health
and Safety Strategic Plan. The plan should be agreed by
senior leadership and include risk rating tasks, in order of
priority, and the alignment with senior leadership responsible
for overseeing the task.
A strategic OH&S plan is a live document and periodically
should be reviewed to monitor progress to achieving
objectives and continuous improvement.
The document may include:
• Strategic prioritised topic
• Action, this could be conducting assessments according to
compliance obligations such as a noise assessment
• Method in which the action can be achieved
• Resources required to achieve the action. For example
human, equipment, financial and external provider expertise
• The key performance indicator to demonstrate achievement
of the action
• General responsibility
• Top Management responsibility
• Timescale
• Risk rating (order of priority)
£
£
20. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE20
SECTION 7:
SUPPORT
Resources
Resources will be required to fulfil the requirements identified
during the planning stages of the system to maintain
continuous improvement. These include human, natural,
infrastructure (buildings, plant, equipment, utilities, emergency
containment systems) technological and financial resources.
It is essential that allocation of resources has the full support
from Top Management, under the requirements of Clause 5, to
drive the maintenance of a safe and healthy work environment.
As part of identifying resources, the organization needs to look
at the information produced in Section 6 to acknowledge the
risk, opportunities and resulting objectives. They then need to
allocate sufficient resources to mitigate or manage them.
Competence
An organization working effectively and efficiently must have
competent workers. In terms of OH&S it is essential that
workers have access to information and have been suitably
trained to prevent accidents or ill health to themselves and
others. Competence can include consideration for:
• Capability to fulfil the task based on defined job roles and
clear understanding of the required OH&S aspects
• Defined methods of recruitment with consideration for
temporary or agency workers
• Awareness of hazards associated with the environment and
processes
• Legal requirements
• Individual capabilities including experience, language skills,
literacy and diversity
The diversity of activities within the organization will determine
the level of training required to fulfil competence. Training gaps
are usually identified with the development of new processes,
for example the introduction of new machinery or in achieving
compliance with regulatory requirements.
No matter how big or small the organization is, training records
are essential as reference and evidence of the fulfilment of
competence. Consider an overview training matrix identifying
fulfilled training gaps including refresher training dates. In
addition, consider individual training records with signatory
evidence from the worker to acknowledge completion and
understanding of training including hazard awareness.
The organization must also consider the competence of
external providers including the procurement of contractors
conducting tasks on site. The organization’s procurement
process may provide the structure for management of external
providers; including evidence of capability, competence and
on site, this may be supported with site induction training.
Either internally or externally, the organization’s Top
Management must be confident that mechanisms are in place
to provide workers with suitable and sufficient competency
based OH&S training.
Awareness
Awareness of the requirements of the OH&S system is critical
to both internal and external workers. There must be a clear
understanding of the organization’s H&S Policy including the
requirement for individuals to protect themselves and others
from exposure to hazards. Awareness training starts before
work commencement for both internal and external workers
and may include:
• OH&S Policy and requirements
• Hazards associated with the environment and processes
• Means to report incidents and receive information following
investigation
• Means to report near misses or safety critical defects
• Structure of supervision
• Provision of information including Safe Systems of Work or
Work Instructions
• Clear understanding that there are no recriminations for
reporting hazards or precautionary removal of individuals
from exposure to harm which is life threatening. This must be
actively encouraged as part of a positive safety culture
It is recommended there is evidence of awareness training.
This is outlined within the ‘competence’ section of Section 7.
This section looks at the requirements which underpin the OH&S management system to
ensure it runs effectively.
21. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 21
Methods of controlling
Documented Information
It’s essential to have a robust but simple system of control for
documented information. This will ensure workers are always
aware of the latest requirements relating to OH&S. In support
of the latest revision of documented information there must
be the means to communicate the latest policies, practices
and work instructions. As previously indicated documented
information will come from internal and external sources.
Below are suggested means of controlling both internal and
external documented information:
Internal
• Develop a document reference system within the header
or footer e.g. Maintenance Procedure No. 1 – MP01,
Maintenance Form 01 – MF01 etc
• Identify the revision status, revision date and author within
the document footer
• Use the same document control methodology for electronic
documents and data
• Develop a spread sheet identifying the reasons why previous
revisions have been updated
• Determine the method of issue for documented information
with consideration for recovery of pre-modified documented
information and communication
• Archive in electronic format previous revisions of documents
based on risk ensuring there is a means of backing up and
recovering data
• Determine and identify in the spread sheet the intended
document retention timescale. This may be based on legal
requirements such as insurance documentation
External
• Determine what should be communicated and retained
based on risk
• Consider scanning to reduce reliance on paper
• Maintain the integrity of archived documentation
Remember to create a simple system to use for all to
understand and access accordingly. Consider supporting the
chosen method with an instructional procedure with
applicable training.
Question Examples
What will be
communicated?
OH&S Policy, site rules
including personal
responsibilities, hazards,
risk assessments, Work
Instructions, minutes from
committee meetings,
investigation results,
organizational structure,
performance
When
communication
occurs?
Recruitment permanent
or temporary, induction
internally and externally,
morning briefing, safety
committee meetings,
pending legal requirements
Who will information
be communicated
to?
Workers including agency,
contractors, external
providers, product end users
and other interested parties
How will information
be communicated?
Notice boards, tool box
talks, email, website,
newsletters, supervision
Internal /
External Sources
Type Use
External Regulatory Government website instructions
and leaflets, codes of practice
External Information External Provider material safety
data sheets, certificates of
conformity
External Information External Provider machinery
installation instructions and
technical specifications
External Information Risk assessments and method
statements
External Certificates Fire system, fixed wiring service
records, liability insurance
documents
External Training Certificates of competence (Fork
Lift Truck, OH&S awareness)
Internal Training Induction presentations, tool
box talks
Internal Training Individual training records
Internal Work Safe Systems of Work
Work Instructions
Internal Inspections Evidence of maintenance and
routine inspections
Communication
– internal and external
Defined channels of communication is key for the success
of the OH&S management system. It is recommended that
there is clear policy on communication endorsed by Top
Management identifying the process of communication. The
organization will need to determine:
Documented information
As with all management systems the extent of documented
information will vary depending on the size, scope and
complexity of processes within the organization. A practical
approach to development and control of documented
information will assist in business protection as well as
providing sources of information for workers relating to hazard
identification. Consider a risk-based approach to the level of
documented information required including consideration
for literacy and language. Documented information is not
restricted to hard copy and will appear in a variety of media
including electronic format, emails and web based. Below is a
selection of the variety of documented information:
22. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE22
SECTION 8:
OPERATION
Once processes within the organization have been identified (see clause 4.4) and planned,
the method in which the business will operate (see Clause 6.0), the company needs to plan
and control each process within the OH&S management system.
Operational Planning and Control is the method in
which the organization determines what is required for
each process and the method in which requirements
are controlled to ensure workers are protected from
harm. Operational Planning and Control is achieved by
identifying the criteria for each process which may include:
• The boundaries of each process and how
they interact
• What resources are required to manage the process
including leadership, equipment, time, human
(competency and training aspects) and financial
• What documented information is required to aid
management of the process including procedures
and safe systems of work
• The method in which changes to the process are
planned and controlled including unintended events
• Application of legal and other requirements or
manufacturer’s instructions for equipment
• Engineering controls, for example interlocked guards
and exhaust systems
The organization must also consider the adaptation of the
work environment to ensure it is suitable and sufficient for
all workers. Adaptation in broad terms may be induction
of new workers or ergonomically changed processes to
protect workers from harm and improve process efficiency.
Change event Method of management
Loss of
knowledgeable
competent
member of staff
Organization of re-training of existing
member of staff supported with an
external provider until the employee is
competent.
First aider
absent
Temporarily train staff in alternative
means of receiving first aid treatment
including neighbouring businesses and
emergency services.
Introduction of
a new piece of
machinery
Appoint a Project Manager to
coordinate implementation including
risk assessment, instruction, training,
supervision. Provision of risk assessment
and installation method statement
from external provider. Development
of control documents based on
manufacturers recommendations.
Flood within a
building
Appointed competent representative to
conduct risk assessment and coordinate
relocation of staff to a safe environment.
Introduction of
new software
Project management coordination,
presentations and toolbox talks,
competence and awareness training.
Eliminating hazards and
reducing OH&S risks
Having chosen the methodology for risk assessment
determined in clause 6.0, the organization will use the
‘Hierarchy of Controls’ outlined in section 6 to eliminate or
reduce hazards to the lowest practicable risk. It is essential that
when conducting risk assessment workers, including external
providers, are competent. On completion of risk assessment
results should be communicated with those workers directly
affected within the operation and to aid the development of
control measures. Workers need to be included in the process
of assessment and other system elements.
Management of Change
It is recognised that accidents can occur when processes
deviate from defined established control measures. This may
include changes in competent supervision and workers or the
introduction of new materials, machinery and processes.
The organization must define and implement a process which
considers change throughout the business. This may be a
written policy which accounts for different scenarios based on
risk and opportunity. The change process may be supported
by a documented system to acknowledge issue and receipt of
the notification to ensure it is communicated and understood.
Notification of change may be supported by training and
competence requirements. Change process could incorporate
a mechanism to assess and prevent the introduction of new
hazards. Examples of events where management of change
might be necessary include but this is not exhaustive:
23. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 23
General
The purchase of goods and services is a requirement for any
business to function. The standard requires the organization
to put controls in place to ensure those purchased goods and
services do not introduce hazards and expose workers to harm
including contractors.
Procurement
A robust procurement process is essential to control product
and services inputs into an organization. Inputs may include
raw materials for products, equipment including machinery,
consumables such as cleaning products and workers
conducting maintenance as part of a service agreement. The
organization is required to develop a process which should
include an assessment of the impact on safety of products
and services prior to purchase. This may include obtaining
product or material safety data from an external provider or
by conducting a risk assessment. Risk assessment with an
external provider may be considered during activities such as
the purchase and installation of machinery. The assessment
would identify potential hazards and suitable control measures
to protect both organizational workers and contractors.
Within the process, consider the delivery of products to
ensure they are inspected against specified requirements
prior to release. Consideration must also be made to ensure
those products and services are legally compliant. This may
be through the assessment of material safety data sheets,
declarations of conformity or business registration with trade
associations. Personnel who are responsible for procurement
must ensure they utilise competent workers to assist with
assessments and to communicate safety information relating to
product or service. Health and safety information may include
material safety data sheets, training, competence requirements
and instructions for use.
Contractors and Outsourcing
Many businesses use the services of contractors (external
providers) to fulfil gaps in processes and to complete tasks
requiring specialist knowledge. The standard requires the
organization to conduct an assessment on those contractors
including due diligence competency checks. The organization
may consider the use of contractor selection criteria to ensure
services are within scope of the task.
The organization must be satisfied there is a process to protect
contractors (workers) and other workers who may be exposed
to hazards due to their activities. During the procurement
process written agreements may be established between
the organization and contractor specifying the organizations
rules. This may be supported by risk assessments and method
statements conducted by both parties with communication of
results.
It is key that necessary checks have been made to ensure
contractors are competent and may, in some circumstances,
require confirmation of compliance to legal requirements. For
example, certification to work on electrical switch gear or to
work on a gas boiler.
Once the procurement process has been completed it is good
practice to support site activities with an induction programme.
This will provide contractor workers with an understanding
of the rules including any specific requirements, for example,
site hazards, authorised areas, near miss reporting processes,
safe walking routes, emergency action plans, supervision and
required permits to work.
Documented Information
The standard requires the organization to maintain
documented information relating to the procurement of
products and services including contractor arrangements.
Below is a list of examples of documented information
considered for retention:
• Risk assessment and method statements between the
organization and contractor
• Material safety data sheets
• Email exchanges relating to safety aspects
• Certificates of conformity – Harnesses, guarding, emergency
stops, PPE
• Contractor permits and licences
• Completed external provider questionnaires
• Worker training records
Emergency preparedness and
response
Planning for unexpected events is a good all-round
organizational discipline. The risk assessment process, for
ISO 45001 identification of hazards, may have highlighted
potential emergency situations with possible catastrophic
consequences. Therefore, it is necessary to put control
measures in place to mitigate for these potential events.
Once emergency situations have been identified, which may
involve workers at every level of the organization, a plan
needs to be formulated and tested. Check that emergency
preparedness and response have been tested within the
internal audit plan.
Testing emergency response plans are critical to raise
awareness of potential events and ensure control measures
function including supervision, individual responsibilities,
suitability of training and communication. Below are some
examples of when emergency plans will be required:
Event Recommendation
Provision of
first aid
Testing of first aid response, consider
shift patterns, availability of equipment
and competent staff etc.
Evacuation drill Method of raising the alarm, contacting
the emergency services, accountability
of workers, staged evacuation, changes
in building layout etc.
Bomb threat Raising the alarm, what to do with
workers – stay put or evacuate to a
safe area, keeping away from windows,
controlled method of raising the alarm.
Chemical
spillage
Raising the alarm, evacuation,
containment, availability of Material
Safety Data Sheets.
Once the plan has been tested it is important to provide
workers with feedback to learn from experience. Again, there
is a requirement to have suitable information and records as
documented information.
24. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE24
SECTION 9:
PERFORMANCE
EVALUATION
Monitoring, measurement, analysis and evaluation
An organization should check, review, inspect and observe its planned activities to ensure they are occurring as intended. An
organization must make sure they have determined the appropriate processes, so they can evaluate how well they are performing
based on risk and opportunities. Monitoring generally indicates processes that can check whether something is occurring as
intended or planned.
The tables below provide examples of monitoring and specific control measures:
Performance evaluation is a constructive process that aims to improve an organization’s
operation and is crucial to the ‘Plan, Do, Check and Act’ model prescribed by ISO 45001.
These processes should help achieve and support organizational strategy and goals.
Event Local Exhaust Ventilation System (LEV)
Monitoring Appointed person to weekly inspect airflow of an LEV system to safely remove fumes from a process.
Measurement Use of a calibrated meter to check the airflow at two inspection locations of the system according to a specified
Work Instruction. (Employee is trained and competent to use the equipment).
Analysis Review of recorded data determining the airflow efficiency of the system to ensure workers are safe. This may
include trends. This would be in compliance with manufacturers specifications and regulatory requirements.
Evaluation The trend analysis indicates a reduction in airflow therefore maintenance is triggered to isolate and inspect the
LEV system.
Event Safe Walking Routes
Monitoring Appointed person daily site inspection of safe walking routes to ensure they are in a condition to prevent slips,
trips and falls.
Measurement Visual inspection to ensure there are no obstructions outside of defined safe walking routes. (Usually
measurement is associated with measurement equipment to obtain data).
Analysis Examination of results from inspections. In this case there may be a trend of equipment repeatedly left in the
same location of a Safe Walking Route.
Evaluation Determination of root cause of why equipment is repeatedly left in the safe walking route. Resulting in allocation
of designated safe place for equipment away from the safe walking route.
25. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 2525
Any equipment used to determine the measurement ‘indicator’
should be calibrated and maintained so that a high degree of
confidence is gained in the credibility of data. The standard also
requires the organization to implement a process to evaluate
legal and other compliance including:
• The frequency and method of evaluation
• If action is needed, the process in which it will be evaluated
and implemented
• Maintain knowledge and understanding of its
compliance status
• Retain documented information to support the evaluation of
legal and other requirements
In practice you may consider putting a list of compliance
obligations within a spreadsheet as outlined under section
6 of this document. Periodically this process should be
audited within the internal audit programme to ensure all
compliance obligations have been fulfilled. Audit results
including compliance status should be communicated to senior
leadership within the organization. Any outstanding or pending
requirements can be actioned by the leadership team. This will
ensure compliance to obligations and reduction in risk including
potential prosecution.
Internal Audit
An internal audit is a systematic method to check organizational
processes and requirements, as well as those detailed in the
ISO 45001 standard. This will ensure the processes in place are
effective and the procedures are being adhered to. The internal
audit programme will aid the organization to achieve the OH&S
objectives and targets. It helps:
• Monitor compliance to policy and objectives
• Provide evidence that all necessary checks are carried out
• Ensure all current legislative and other requirements are met
• Assess the effectiveness of risk management
• Worker engagement leading to a positive safety culture
• Identify improvement using ‘fresh eyes’ to review a process
• Aid continual improvement
Internal audits must be conducted by competent staff with a
degree of impartiality to the area being audited. A risk-based
approach can be applied to areas being audited with an
increased focus on higher risk activities. Internal audits must be
planned with an expectation of each process being audited in
regular intervals.
In addition to planned audits, unplanned audits may be
conducted in reaction to problematic areas, near miss reports or
incident data with focus on accident prevention.
It is beneficial to communicate audit results to applicable
interested parties including workers and set realistic completion
timescales for identified ‘opportunities for improvement’ or ‘non-
conformities’. Top Management must be aware of deficiencies
within the system to ensure necessary resources can be
allocated to mitigate the findings. Audit results will be reviewed
as part of the management review process.
Management Review
Management Review is an essential element of the Occupational
Health and Safety Management System. The aim of the review
is for Top Management to assess the performance of the
management system to ensure it has been effective and suitable
for the needs of the business, ultimately preventing injury or
harm to workers. The management review is also a planned
activity to review objectives including compliance and to set
new objectives.
Usually management review meetings are conducted annually,
however many organizations conduct management reviews
every six months or quarterly to track the performance of the
system. If more frequent meetings are conducted, often the
meeting agenda is reduced with the full agenda occurring
annually.
The table on the following page provides an overview of
prescribed management review agenda requirements:
26. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE26
On completion of the management review meeting the
organization must decide with senior leadership and support,
what is needed to continuously improve OH&S and satisfy
the standard. The following points outline the Management
Review Meeting output requirements:
• Provide a wide-ranging conclusion to the continuing stability,
adequacy and effectiveness in achieving its intended
outcomes
• Identify continual improvement opportunities
• Identify any required changes to the
OH&S management system
• Identify required resources
• Identify any actions needed
• Identify any integration improvements with other business
processes. This may be further harmonisation with ISO 9001
or ISO 14001 management systems
• Any implications to the strategic direction of the business. This
is a broad scope requirement to capture any topic to improve
the OH&S management system
The organization is required to record the meeting minutes
within documented information. This information must be
communicated to the relevant interested parties and where
applicable worker representatives.
It is good practice to transfer management review objectives into
a separate document with identified key performance indicators,
expected completed timescales and delegated responsibilities.
These objectives may be communicated via the organizations
email or placed on notice boards.
9.3 Standard
reference
Summary of requirement for Management Review agenda / clause reference point
a) Provide a summary of the status of actions from the output of the previous management review. This will
include completed or incomplete tasks and justifications for their status. This information can be pre-prepared
for the meeting.
b1) Explain any changes to internal and external issues relevant to the context of the organization to ensure the
needs and expectations of interested parties including workers are fulfilled.
b2) In addition to B1 note any changes or pending changes to legal and other requirements and actions to address
compliance obligations.
b3) If there are any differences or changes to organizational risk and opportunities, they should be noted and
explained and discussed in the section below.
c) Review whether compliance to OH&S policy and objectives have been achieved. It is good practice to place
objectives within a table, align key performance indicators to achieve them and comments if they have or have
not been achieved. This will also indicate compliance status of continual improvement.
d1) Discuss any incidents or non-conformities which have occurred since the last review period including trends.
Are there any trends and what actions have been taken to prevent re-occurrence?
d2) Determine if monitoring and measuring has been effective in meeting expectations within the organization. If
evidence suggests it has not been effective Top Management can influence improvement.
d3) Discuss the status of compliance to legal and other requirements. This may include evidence to support
compliance including the methods of determination and sources of information. Discuss any pending legal and
other requirements.
d4) Discuss results of internal audits and actions that have been taken to resolve any non-conformities. Discuss
areas of improvement and areas which are performing well.
d5) Overview of consultation of workers. This may be feedback from safety committee meetings and actions to
address risk and opportunities. Other processes to ensure workers are safe including contractor arrangements.
d6) Discuss risk and opportunities including performance of hazard identification and opportunities to mitigate
harm to workers. The organization may wish to review significant findings of risk assessments.
e) With consideration of the information discussed in previous sections are there enough resources to maintain
and continuously improve the management system. This could be human or financial. Top Management are
key to influence improvement in this area.
f) Discuss communications with interested parties, this may include regulatory authorities or external providers
who are providing materials which have an impact on safety.
g) General discussion with the provision of information how the OH&S management system is performing and
how can it continually improve in the future.
27. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 27ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 27
28. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE28
SECTION 10:
IMPROVEMENT
• From the results discussed in section 9 Management Review including the
analysis and evaluation of OH&S performance, internal auditing and feedback
from worker engagement
• Non-conformity and corrective action
• Incident investigation and corrective action
• Accident investigation and corrective action
• Compliance obligations including output from the introduction of new regulation
Several different methods of capturing improvement opportunities may be designed
in the system based on the structure, activities and risk within the business discussed
in section 4 and 6. The chosen methods must consider the following:
• Means of reporting including incidents to the right
groups of workers and interested parties
• The timescale of reporting
• How the information is going to be recorded as
documented information for example near miss
report cards, accident reports, defect reports,
reports to senior leadership
• Using workers to participate in investigations to
determine root cause analysis
• A structured system to prevent reoccurrence
• Hierarchy of control measures to reduce risk as far
as is reasonably practicable
• Assessment of OH&S risks prior to the introduction
of a corrective action to prevent the introduction of
new hazards
• Training and competence for workers and interested
parties on the means of reporting OH&S hazards,
incidents and opportunities for improvement
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE28
29. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 29
Basic example process of reporting an incident leading to non-conformance,
corrective action and continuous improvement
Process Event Management System
Incident • A delivery vehicle during a reversing manoeuvre
narrowly misses a worker.
• Driver has conducted the visitor induction
including issue of site map.
Near miss
report Card
• The worker fills out a simple report card outlining the
occurrence with the assistance of the supervisor.
• Near Miss Report Card available across the site.
Process training delivered during induction.
Corrective
Action
• Cones and tape are immediately placed to prevent
entry to the area of incident by the supervisor.
• Temporary Corrective Action.
Investigation • The supervisor has a discussion with the delivery
driver relating to the circumstances.
• The warehouse and site manager discuss the
incident and review the associated risk assessment.
• Workers located in the area provide input.
• Details recorded as part of the investigation.
• Risk assessment reviewed.
Risk based
thinking
solution
• Following the risk assessment review including
discussions with Top Management, physical barriers
are placed on the pedestrian walkway as segregation
of vehicles and transport.
• Additional lighting is installed.
• Barriers are incorporated into the maintenance
programme.
• Risk assessment revised.
• Delivery driver induction modified to include
barriered walkways.
• Non-conformance report completed with root
cause analysis.
• Recorded within the incident report register.
• Maintenance programme updated.
Communication • The delivery driver (worker) is contacted and
provided with incident feedback and closure.
• The worker who reported the near miss is provided
with feedback.
• Incident report sent to transport company.
• Incident report worker signs the corrective action
report as evidence of positive feedback.
Review • The incident is discussed at the Safety committee
and management meetings.
• The responsible supervisor reports the effectiveness
of the introduced changes.
• Safety committee and management meeting
minutes.
• Committee meeting minutes posted on notice
boards.
Management
Review
• Overview of incident and positive outcome within
statistics.
• Near miss / incident statistics review.
Management Review Minutes communicated.
• A regular audit of pedestrian routes is added
to the internal audit programme as part of an
improvement objective.
Resulting in Continuous Improvement
Incident
Unlike ISO 9001 Quality and ISO 14001 Environmental management systems, ISO 45001 introduces ‘Incident’ alongside non-
conformity and corrective action. Clause 3 ‘Terms of Definition’ within the standard provides the parameters in which ‘incident’
can be interpreted and reported. An ‘incident’ is an occurrence that does not result in an injury and / or ill health. Therefore,
the organization must implement a system of reporting that captures events which have not necessarily been foreseen within
processes of the management system. Often these are referred to as ‘near misses’, ‘near-hit’ or a ‘close call’. When a near miss is
reported there may be a process in which during the investigation the findings are recorded within a non-conformance report.
30. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE30
GET THE MOST
FROM YOUR
MANAGEMENT
SYSTEMS
Top tips to get the most out of your health and safety
management system:
1. To have an effective OH&S management
system the organization must have
commitment from ‘Top Management’ to
implement and continually improve
2. Develop the management system as
a tool to protect workers and business
interests and not just to satisfy the
standard
3. Use ‘context’ to understand how
the organization can internally and
externally impact on OH&S including
workers
4. Inform interested parties and workers of
their objectives when implementing the
standard to gain ‘buy in’ and generate a
positive safety culture
5. When designing processes ensure that
they are relevant to the environment
they are intended to be used. In other
words, do not overcomplicate the
system
6. Build the requirements of the standard
in to existing processes and control –
OHS is not an add-on
7. Consider integrating this standard into
existing management systems such
as ISO 9001 Quality and ISO 14001
Environmental. This will help embed
OH&S into the thinking of both Top
Management and Workers leading to a
safe workplace
8. Implementation of this standard is not
a burden on your organization. Risk
based thinking with the participation of
workers should improve safety culture
and productivity
ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE30
32. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE32 ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE32
NEXT STEPS ONCE
IMPLEMENTED
AWARENESS TRAINING
• Your organization should raise awareness about
various standards covered under IMS.
• You should hold separate training meetings for top
management, middle management and junior level
management, which will help to create a motivating
environment, ready for implementation.
POLICY AND OBJECTIVES
• Your organization should develop an Integrated
Quality Policy/Environment Policy/Health & Safety
Policy/Information Security Policy and relevant
objectives to help meet the requirements.
• By working with top level management your company
should hold workshops with all levels of management
staff to outline the integrated objectives.
INTERNAL GAP ANALYSIS
• Your organization should identify and compare the
level of compliance of existing systems against
requirements of the standards under your new IMS.
• Relevant staff should all understand the operations of
the organization and develop a process map for the
activities within the business.
DOCUMENTATION / PROCESS DESIGN
• The organization should create documentation
of the processes as per requirements of relevant
standard(s).
• You should write and implement a manual, functional
procedures booklet, work instructions, system
procedures and provide associated terms.
DOCUMENTATION / PROCESS
IMPLEMENTATION
• Processes / Documents developed in step 4, should
be implemented across the organization covering all
the departments and activities.
• The organization should hold a workshop on the
implementation as per applicable for the ISO
standard requirements.
5
4
3
2
1
INTERNAL AUDIT
• A robust internal audit system for the organization is
essential. Internal Auditor Training is recommended
and NQA can provide Internal Auditor Training for the
standard(s) that you are implementing.
• It is important to implement corrective actions for
improvements, in each of the audited documents, in
order to bridge gaps and ensure effectiveness of IMS.
ORGANISE A MANAGEMENT ‘SYSTEM’
REVIEW MEETING
• Top level management must review various official
business aspects of the organization, which are
relevant to the standards being implemented.
• Review the policy, objectives, results of internal
audit, results of process performance, results of
complaints/feedback/legal compliance, results of risk
assessment/incidents and develop an action plan
following the meeting - which must be minuted.
THOROUGH GAP ANALYSIS OF
IMPLEMENTED SYSTEMS
• A formal pre-certification gap analysis should be
conducted to assess effectiveness and compliance of
system implementation in the organization.
• This final gap analysis will prepare your organization
for the final certification audit.
CORRECTIVE ACTIONS
• Organization should be ready for final certification
audit, providing that the gap analysis audit conducted
in the last step and all the non-conformities (NC)
have been assigned corrective actions.
• Check that all the significant NCs are closed and the
organization is ready for the final certification audit.
FINAL CERTIFICATION AUDIT
• Once completed, your organization is hopefully
recommended for registration to
ISO 9001/14001/ISO 45001.
• CONGRATULATIONS!10
9
8
7
6
33. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 33ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 33
HEALTH AND
SAFETY
MANAGEMENT
TRAINING
Learn how to identify, reduce and mitigate risk to your stakeholders and their property.
Need to get up to speed with the new 2018 health and safety standard? Gain the knowledge
and skills to manage the migration effectively.
COURSE DETAILS LEVEL DURATION PRICE
NQA ISO 45001:2018 OH&S (Health & Safety)
Migration E-Learning Course
1 0.5 Days £170.00
NQA ISO 45001 OH&S (Health & Safety)
Migration & Implementation Course
1 1 Day £399.00
NQA ISO 45001 OH&S (Health & Safety)
Introduction & Implementation Course
1 2 Days £699.00
NQA ISO 45001 OH&S (Health & Safety)
Internal Auditor Course
2 2 Days £699.00
NQA ISO 45001 OH&S (Health & Safety)
Auditor Conversion Course
2 3 Days £950.00
34. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE34 ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE34
NOTES
35. ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 35ISO 45001:2018 OCCUPATIONAL HEALTH & SAFETY IMPLEMENTATION GUIDE 35
NOTES
36. www.nqa.com
USEFUL LINKS
Health and Safety Management Training
https://www.nqa.com/training/health-safety-management
The Institution of Occupational Safety and Health
https://www.iosh.co.uk/
The Health and Safety Executive
http://www.hse.gov.uk/
Authored on behalf of NQA by: Alister Constantine