This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
Euromold Connectors 400 Series Interface Type B Bushing
* Connector Type : 14mm Plug-In Pin Contact
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 400amps
* Specification : CENELEC EN50180 & EN50181
Euromold 400LR Elbow Connectors are used with 400 Series Interface B Bushing.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type B (400amp) bushings with 14mm plug-in pins, up to 33kV.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold straight plug connectors, Nexans Euromold bushings (air, oil and gas insulated switchgear) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Euromold elbow connectors, Euromold tee connectors, Euromold bushings (oil insulated) and Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series, 400TB 440TB Features :
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
T&D UK with the support of Nexans provide installation training and certification for experienced high voltage cable jointers up to 33kV.
Nexans Euromold Connectors & Bushing Interfaces
Euromold Connectors 200 Series Interface Type A Bushing
* Connector Type : 7.9mm Plug-In Pin Contact
* Voltage Range : 11/12kV-24kV
* Current Rating : 250amps
* Specification : CENELEC EN50180 & EN50181
Euromold 158LR Elbow Connectors are used with 200 Series Interface A Bushing.
Prysmian Group/Draka is world leader in the energy and telecom cables and systems industry. With sales ofsome €8 billion in 2012, more than 20,000 employees across 50 countries and 91 plants , the Group is strongly positioned in high-tech markets and offers the widest range of products, services, technologies and know-how
Prysmian Cables & Systems is the UK's largest domestic manufacturer of energy and telecommunications cables and systems to service home and export markets.
The Nexans Euromold compact version screened separable connector is suitable for high voltage HV cable termination up to 33kV. Interface Type C Euromold M16 bolted tee connectors up to 33kV are designed to connect and terminate polymeric (XLPE EPR) cables to M16 bolted 400 series equipment bushings. Nexans Euromold connectors are supplied in sets of three phases.
Nexans Euromold Kit Contents: 3 x connector housings, 3 x size sensitive cable reducers, 3 x conductor contact lug, 3 x clamping screws and 3 x insulating plugs & caps.
Panduit stainless steel marking and identification systems provide long-term permanent marking with clear visibility for optimum identification of cables, pipes, conduits and electrical equipment. The Panduit system comprises stainless steel cable ties, cable marker plates and cable tags.
Panduit MEHT187 (pictured) metal embossing hand tool and stainless steel tape system is lightweight, compact and durable for working in harsh, hazardous and high voltage electrical projects.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
Euromold Connectors 400 Series Interface Type B Bushing
* Connector Type : 14mm Plug-In Pin Contact
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 400amps
* Specification : CENELEC EN50180 & EN50181
Euromold 400LR Elbow Connectors are used with 400 Series Interface B Bushing.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type B (400amp) bushings with 14mm plug-in pins, up to 33kV.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold straight plug connectors, Nexans Euromold bushings (air, oil and gas insulated switchgear) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Euromold elbow connectors, Euromold tee connectors, Euromold bushings (oil insulated) and Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series, 400TB 440TB Features :
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
T&D UK with the support of Nexans provide installation training and certification for experienced high voltage cable jointers up to 33kV.
Nexans Euromold Connectors & Bushing Interfaces
Euromold Connectors 200 Series Interface Type A Bushing
* Connector Type : 7.9mm Plug-In Pin Contact
* Voltage Range : 11/12kV-24kV
* Current Rating : 250amps
* Specification : CENELEC EN50180 & EN50181
Euromold 158LR Elbow Connectors are used with 200 Series Interface A Bushing.
Prysmian Group/Draka is world leader in the energy and telecom cables and systems industry. With sales ofsome €8 billion in 2012, more than 20,000 employees across 50 countries and 91 plants , the Group is strongly positioned in high-tech markets and offers the widest range of products, services, technologies and know-how
Prysmian Cables & Systems is the UK's largest domestic manufacturer of energy and telecommunications cables and systems to service home and export markets.
The Nexans Euromold compact version screened separable connector is suitable for high voltage HV cable termination up to 33kV. Interface Type C Euromold M16 bolted tee connectors up to 33kV are designed to connect and terminate polymeric (XLPE EPR) cables to M16 bolted 400 series equipment bushings. Nexans Euromold connectors are supplied in sets of three phases.
Nexans Euromold Kit Contents: 3 x connector housings, 3 x size sensitive cable reducers, 3 x conductor contact lug, 3 x clamping screws and 3 x insulating plugs & caps.
Panduit stainless steel marking and identification systems provide long-term permanent marking with clear visibility for optimum identification of cables, pipes, conduits and electrical equipment. The Panduit system comprises stainless steel cable ties, cable marker plates and cable tags.
Panduit MEHT187 (pictured) metal embossing hand tool and stainless steel tape system is lightweight, compact and durable for working in harsh, hazardous and high voltage electrical projects.
The Roxtec BGTM product family is designed to safely and efficiently bond or ground armored and shielded cables through a single cut-out or open- ing in a wall, floor or electrical enclosure. The product provides a secure means of cable terminations and pass-throughs, provides an environmental and fire resistant seal, and establishes a secure bonding path to ground for metallic cable components. The product is certified for use in hazardous locations where required by local codes and regulations. The Roxtec BGTM system complies with EU directive 2002/95/EC, Restriction of Hazardous Substances (RoHS).
T&D distribute hazardous area (ATEX) flameproof cable glands to the oil, gas, petrochemical offshore and marine industries.
CMP flameproof cable glands (A2F, E1FW, E2FW, E1FX) with ATEX certification provide an inner and outer proof sheath seal with armour clamp for steel wire, steel tape, screened or braided cables and lead sheathed cables.
CMP flameproof cable glands are Dual Certified for Flameproof EEx d and Increased Safety EEx e methods of explosion protection - CMP Triton cable glands are deluge proof (submersible) and flameproof suitable for terminating SWA, STA and braided cables.
Hazardous area cable glands suit Zone 1, Zone 2, Zone 21 and Zone 22 with Dual Certification (Flameproof Type 'Ex d' and Increased Safety Type 'Ex e').
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy.
The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts. T&D UK stock and distribute an extensive range of ATEX Certified Electrical Equipment for Hazardous Areas including cable glands, electrical enclosures, junction boxes, plugs and sockets, cable joints, control stations, cable transits, cable cleats, mobile phones, laptops, digital cameras, conduit systems, portable lighting (torches, handlamps, headlamps).
Flameproof Ex "d" Cable Glands - electrical equipment may include arcing and sparking (incendive) devices and flammable mixtures which may enter the enclosure or junction box. The cable gland design is specified to contain an internal explosion and prevent transmission of sufficient energy to ignite a potentially flammable atmosphere outside the enclosure or junction box.
Roxtec Cable Transits - Installing & Terminating Substation Cables
Roxtec cable transits provide several clear advantages for installing and terminating cables in industrial and high voltage substations. Roxtec cable transits provide a standardised design with the flexibility to terminate a variety of different sizes and cable constructions. The ease of cable installation reduces labour costs and minimises the potential for cable insulation damage. The structural and environmental integrity of the wall or floor penetration is maintained providing an insulated, vapor-tight and fire-stop barrier and cables can be easily added for future up-grading. Roxtec cable transits are a viable alternative for terminating cables into industrial power substations.
400 Series Interface C Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Euromold Connectors 400 Series Interface Type C Bushing - 630Amp
* Connector Type : M16 Bolted Copper Insert
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 630amps
* Specification : CENELEC EN50180 & EN50181
Euromold 430TB Elbow Connectors are used with 400 Series Interface C Bushing.
Nexans Euromold tee connectors are designed for terminating high voltage XLPE power cables into compact switchgear to make optimum use of limited installation space.
Nexans, the worldwide leader in the cable industry, has extended its well-proven range of compact high voltage (HV) connectors with two new tee-shaped connectors designed specifically for use with compact switchgear and transformers now being specified for wind turbine applications. The Nexans Euromold M430TB connector is for use with higher voltages (up to 33-36kV) and the M434TB connector is for higher currents (up to 1,250 A).
Trend Towards Compact Switchgear for Wind Turbines
The growing trend towards using ever more compact high voltage switchgear in wind turbines has resulted in smaller cable boxes, limiting the space available for connectors. Nexans has responded to this challenge by developing its new asymmetric tee-shape connectors to create a compact connection solution. This now enables two cables to be connected in the same space required for one cable using a traditional non-compact connector. As well as being ideal for all applications where space is a limiting factor, the Nexans compact connectors also enable users to increase the capacity of an existing installation.
EPDM Jacket: A Key Design Feature for Safety and Reliability
The Nexans Euromold M430TB and the M434TB are separable tee-shape bolted connectors designed to connect high voltage polymer-insulated cable to wind turbine equipment such as switchgear and transformers- they can also be used for cable to cable connections with the appropriate mating parts. A key design feature is the thick (3 mm) EPDM (Ethylene Propylene Diene Monomer) rubber conductive insulation jacket that provides a total safe to touch screen for personnel safety, this is both more reliable and longer lasting than the painted silicone rubber insulation used in many connectors.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/11-X
12.0-17.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/25-X
26.5-32.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/22-X
23.5-31.0mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/19-X
20.0-26.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/15-X
16.0-22mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/27-X
28.5-37.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...AKBAR TRADING
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Similar to Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
1. Catalogue 2014
a Nexans company
Medium voltage symmetrical
separable connectors
- Interface C -
2.
3. 1
08/2014
While every care is taken to ensure that the information contained
in this publication is correct, no legal responsibility can be accepted
for any inaccuracy. Nexans Network Solutions N.V. - Div. Euromold
reserves the right to alter or modify the characteristics of its products
described in this catalogue as standards and technology evolve.
EUROMOLD
Euromold is the leading
European specialised designer,
manufacturer and distributor
of prefabricated cable
accessories for medium voltage
energy distribution. Euromold
provides a complete range of
accessories for underground
cables: premoulded EPDM
rubber connectors for cables
and epoxy bushings for
transformers and switchgear, as
well as a large range of cold-
shrinkable terminations and
joints from 12 to 42 kV.
Euromold is also the
manufacturer of electrical
components for the high
voltage accessories of the
Nexans group.
ISO 9001 Certificate
Since 1992, Euromold’s
commitment to quality is
demonstrated by its ISO 9001
certification.
Laboratory accreditation
Since June 2000, Euromold’s
independent ELAB laboratory
obtained the BELAC
accreditation no.144-TEST
conform with the European
standards for laboratories ISO
17025 for electrical testing
of low and medium voltage
cable accessories according
to the international standards
EN 50393, IEC 60502-4, IEC
61442 and HD 629.
International standards
All our products meet the
International standards like
CENELEC HD 629.1, CENELEC
EN 50180, IEC 60137, IEC
60502-4… or country speci-
fications. Official certificates,
CESI, KEMA, ATEX… prove the
conformity of our products.
Long duration tests of existing
or new products are con-
tinuously performed in our test
fields.
Nexans Network Solutions
Div. Euromold
COMPANY PRESENTATION
4. 2
08/2014
SEPARABLE CONNECTORS
INTERFACE C
Interface C1 & C2
Dimensions according to
European CENELEC EN 50180
and 50181 (in mm).
Table of contents
400LB - elbow connector
400TB - tee connector
440TB - tee connector
440PB - coupling connector
400PB - XSA - surge arrester
400TR and 400TR-LB - test rods
400TK and 400SW installation tools
Accessories
Possible arrangements
90±0.2
0
-0.51.5
Dia. 22 min for C1
Dia. 32 nominal for C2
Dia. 46±0.2
Dia. 56±0.2
Dia. 70±0.2
M16 x 2 - 6H
29
min.
11
min.
In mm.
06/2014
6. 4
08/2014
Specifications and
standards
The 400LB separable connector
meets the requirements of
CENELEC HD 629.1.
Up to 24 kV - 630 A
Separable
connector
type
Voltage
Um
(kV)
Current
Ir
(A)
Conductor sizes (mm2)
min max
400LB/G
K400LB/G
12
24
630
630
25
25
300
300
Design
Separable connector
comprising:
1. Conductive EPDM insert.
2. Conductive EPDM jacket.
3. Insulating EPDM layer
moulded between the insert
and the jacket.
4. Type C - 630 A interface
as described by CENELEC
EN 50180 and 50181.
5. Conductor connector (not
included in the standard kit).
6. Insulating plug.
7. Cable reducer.
8. Earthing lead.
9. Transition contact M10/M16.
The screen break design
enables cable outer sheath
testing without removing or
dismantling the connector.
400LB
INTERFACE C
ELBOW CONNECTOR
Application
Separable elbow connector
designed to connect polymeric
insulated cable to equipment
(transformers, switchgear,
motors...).
Also connects cable to cable,
using the appropriate mating
part.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
Technical characteristics
• The thick conductive EPDM
jacket provides a total safe to
touch screen which ensures
safety for personnel.
• Each separable connector is
tested for AC withstand and
partial discharge prior to
leaving the factory.
330 mm
205 mm
9
4
1
5
2
3
8
7
6
7. 5
Kit contents
The complete (K)400LB/G
elbow connector kit comprises
3 x the following components:
Ordering instructions
Select the part number
which gives the best centring
to the cable core insulation
diameter.
Add a 'K' for use up to 24 kV.
Ordering
part number
Dia. over core insulation (mm)
min max
3 x 400LB/G-11
3 x 400LB/G-15
3 x 400LB/G-19
3 x 400LB/G-22
3 x 400LB/G-25
3 x 400LB/G-27
12.0
16.0
20.0
23.5
26.5
28.5
17.5
22.0
26.5
31.0
32.5
37.5
Example:
The copper wire screened
cables are 24 kV, 240 mm2
stranded aluminium with a
diameter over core insulation
of 32.2 mm.
Order 3 x K400LB/G-27 elbow
connector kit.
Can be supplied
with cable lugs.
For applications
outdoors and in
humid climate.
Order: +MWS.
Components can be
ordered individually.
For use with
copper tape
screened cables.
Order: Kit MT.
For use with Alupe or
C 33-226 cables.
Please contact our
representative.
For use with fabric tape
(graphite) screened cables.
Order additional
semi-conductive tape
(type TSC).
3 x (K)400LB/G-W(-X)
connector kit
Table W
Notes:
We do not supply the compression
lugs in the standard kit. All types
of cable lugs can be used. The
lugs must be within the dimensions
specified and the palm of the lug
must be copper or any equivalent
alloy.
Transition
contact +
screw assembly
400LTS
Insulating
plug
400LBP
Cable reducer
411CA-W
Connector housing
(K)400BLB
2 max
Dia. 10.2 or 13
24 max
112 max
135 max
38
max
Dia. 36
max
10
max
The kit also comprises silicone grease, field
control mastic and installation instructions.
In mm.
8. 6
08/2014
Up to 42 kV
630 A (800 A)
400TB
INTERFACE C
TEE CONNECTOR
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
20.8/36 (42) kV
Technical characteristics
• The thick conductive EPDM
jacket provides a total safe to
touch screen which ensures
safety for personnel.
• Each separable connector is
tested for AC withstand and
partial discharge prior to
leaving the factory.
Application
Separable tee shape
connector (bolted type)
designed to connect polymeric
insulated cable to equipment
(transformers, switchgear,
motors, ...).
Also connects cable to cable
when using the appropriate
mating parts.
Design
Separable connector
comprising:
1. Conductive EPDM insert.
2. Conductive EPDM jacket.
3. Insulating EPDM layer.
4. Type C - 630 A interface
as described by CENELEC
EN 50180 and 50181.
5. Conductor connector.
6. Basic insulating plug (with
VD point).
7. Cable reducer.
8. Conductive rubber cap.
9. Clamping screw.
10. Earthing lead.
The screen break design
enables cable outer sheath
testing without removing or
dismantling the connector.
Specifications and
standards
The 400TB separable connector
meets the requirements of
CENELEC HD 629.1 S1.
220 mm
350 mm
8
4 9
1
2
3
10
7
6
255 mm
5
Separable
connector
type
Voltage
Um
(kV)
Current
Ir
(A)
Current Ir (A)
Conductor sizes (mm2)
When installed on an appropriate equipment
bushing and when using a copper (-11-2) or a
bolted (-12-5 or -14-5) conductor contact min max
400TB/G
K400TB/G
M400TB/G
P400TB/G
12
24
36
42
630
630
630
630
800
800
800
800
35
35
35
35
300
300
240
240
9. 7
For use with
copper tape
screened cables.
Order: Kit MT.
For use in potentially
explosive atmospheres
(for 12 kV max).
Add -/ATEX to part number.
Kit contents
The complete (K)(M)(P)400TB/G
tee connector kit comprises the
following components:
Ordering instructions
To order the tee connector,
select the ordering part number
which gives you the best
centring of your core insula-
tion diameter and substitute X
using table X, according to your
conductor size and type.
Add a 'K' for use up to 24 kV,
add an 'M' for use up to 36 kV,
add a 'P' for use up to 42 kV.
Ordering
part number
Dia. over core insulation (mm)
min max
400TB/G-11-X
400TB/G-15-X
400TB/G-19-X
400TB/G-22-X
400TB/G-25-X
400TB/G-27-X
12.0
16.0
20.0
23.5
26.5
28.5
17.5
22.0
26.5
31.0
32.5
37.5
Example:
The copper wire screened cable
is 36 kV, 150 mm2 stranded
copper with a diameter over
core insulation of 32.5 mm.
Order a M400TB/G-27-150(K)
M-11-2 tee connector kit.
Table W
Table X
(K)(M)(P)400TB/G-W-X
connector kit
Connector housing
(K)(M)(P)400BT/G
Clamping
screw
400TCS
Basic insulating
plug
(K)(M)(P)400BIPA
+ rubber cap
Cable reducer
411CA-W
Conductor
contact TMBC-X
Conductor
contact TBC-X
For use with
other cable types.
Please contact our
representative.
Components can be
ordered individually.
For applications
outdoors and in
humid climate.
Order: +MWS.
When installed on an
appropriate equipment
bushing:
800 A continuously
The kit also comprises silicone grease, field
control mastic, installation instructions and
crimp chart.
Conductor
sizes (mm2)
Aluminium conductor
Aluminium and
copper conductor
Copper
conductor
DIN
hexagonal
Deep
indent
Bolted
DIN
hexagonal
35 35(K)M-10-2 35KM-10-1 35(K)M-11-2
50 50(K)M-10-2 50(K)M-10-1 50(K)M-11-2
70 70(K)M-10-2 70(K)M-10-1 70(K)M-11-2
95 95(K)M-10-2 95(K)M-10-1 95(K)M-11-2
120 120(K)M-10-2 120(K)M-10-1 120(K)M-11-2
150 150(K)M-10-2 150(K)M-10-1 150(K)M-11-2
185 185(K)M-10-2 185(K)M-10-1 185(K)M-11-2
240 240(K)M-10-2 240(K)M-10-1 240(K)M-11-2
300 300(K)M-10-2 – 300(K)M-11-2
16.95-14-5
50.150-14-5
95.240-14-5
120.300-14-5
10. 8
08/2014
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
20.8/36 (42) kV
Up to 42 kV
630 A (1250 A)
440TB
INTERFACE C
TEE CONNECTOR
Technical characteristics
• The thick conductive EPDM
jacket provides a total safe to
touch screen which ensures
safety for personnel.
• Each separable connector is
tested for AC withstand and
partial discharge prior to
leaving the factory.
Application
Separable tee shape
connector (bolted type)
designed to connect polymeric
insulated cable to equipment
(transformers, switchgear,
motors, ...).
Also connects cable to cable
when using the appropriate
mating parts.
Design
Separable connector
comprising:
1. Conductive EPDM insert.
2. Conductive EPDM jacket.
3. Insulating EPDM layer
moulded between the insert
and the jacket.
4. Type C - 630 A interface
as described by CENELEC
EN 50180 and 50181.
5. Conductor connector.
6. Basic insulating plug (with
VD point).
7. Cable reducer.
8. Conductive rubber cap.
9. Clamping screw.
10. Earthing lead.
The screen break design
enables cable outer sheath
testing without removing or
dismantling the connector.
Specifications and
standards
The 440TB separable connector
meets the requirements of
CENELEC HD 629.1.
Separable
connector
type
Voltage
Um
(kV)
Current
Ir
(A)
Current
Ir (A)
When installed on an
appropriate equipment bushing
Conductor sizes (mm2)
min max
440TB/G
K440TB/G
M440TB/G
P440TB/G
12
24
36
42
630
630
630
630
1250
1250
1250
1250
185
185
185
185
630
630
630
630
4 9
1
2
3
10
7
8
255 mm
220 mm
355 mm
65
11. 9
Ordering instructions
To order the tee connector,
select the ordering part number
which gives you the best
centring of your core insula-
tion diameter and substitute X
using table X, according to your
conductor size and type.
Add a 'K' for use up to 24 kV,
add an 'M' for use up to 36 kV,
add a 'P' for use up to 42 kV.
Example:
The copper wire screened cable
is 36 kV, 240 mm2 stranded
aluminium with a diameter over
core insulation of 37.0 mm.
Order a M440TB/G-32-240(K)
M-12-2 tee connector kit.
Ordering
part number
Dia. over core insulation (mm)
min max
440TB/G-22-X
440TB/G-27-X
440TB/G-32-X
440TB/G-37-X
440TB/G-43-X
23.5
28.5
34.0
39.0
45.5
31.0
37.5
42.5
48.5
56.0
When installed on an
appropriate equipment
bushing:
1250 A continuously
Table W
Table X
Components can be
ordered individually.
Kit contents
The complete (K)(M)(P)440TB/G
tee connector kit comprises the
following components:
The kit also comprises silicone grease, field
control mastic, installation instructions and
crimp chart.
(K)(M)(P)440TB/G-W-X
connector kit
Connector housing
(K)(M)(P)440BT/G
Clamping
screw
400TCS
Cable reducer
611CA-W
Conductor
contact TMBC-X
Conductor
contact TBC-X
Basic insulating
plug
(K)(M)(P)400BIPA
+ rubber cap
For use with
copper tape
screened cables.
Order: Kit MT.
For use in potentially
explosive atmospheres
(for 12 kV max).
Add -/ATEX to part number.
For use with
other cable types.
Please contact our
representative.
For applications
outdoors and in
humid climate.
Order: +MWS.
Conduc-
tor sizes
(mm2)
Aluminium conductor
Aluminium and copper
conductor
Copper
conductor
DIN
hexagonal
Deep
indent
Bolted
DIN
hexagonal
185
240
300
400
500
630
185(K)M-12-2
240(K)M-12-2
300(K)M-12-2
400(K)M-12-2
500(K)M-12-2
–
185KM-12-1
240KM-12-1
300KM-12-1
400KM-12-1
500KM-12-1
630KM-12-1
185(K)M-11-2
240(K)M-11-2
300(K)M-11-2
400(K)M-11-2
500(K)M-11-2
630(K)M-11-2
12. 10
08/2014
Application
Separable coupling connector
(bolted type) for dual cable
arrangement. It has been
designed to be used with
400TB and 440TB separable
tee connector.
Technical characteristics
• A thick conductive EPDM
jacket provides a total safe to
touch screen.
• Each separable connector is
tested for AC withstand and
partial discharge prior to
leaving the factory.
Up to 42 kV
800 A
440PB
COUPLING CONNECTOR
FOR 400TB AND 440TB
Specifications and
standards
The 440PB coupling connector
meets the requirements of
CENELEC HD 629.1.
Design
1. Interface designed to fit
400TB/440TB connector.
2. Bus for 440PB.
3. Conductive EPDM insert.
4. Insulating EPDM layer
moulded between the
insert and the jacket.
5. Conductive EPDM jacket.
6. Conductive EPDM cap.
7. Basic insulating plug.
8. Conductor connector
(hexagonal crimping, deep
indent crimping or bolted).
9. Cable reducer.
10. Earthing lead.
11. Threaded M16 stud for the
equipment bushing.
The screen break design
enables cable outer sheath
testing without removing or
dismantling the connector.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
20.8/36 (42) kV
Separable
connector
type
Voltage
Um
(kV)
Current
Ir
(A)
Conductor sizes (mm2)
min max
440PB/G
K440PB/G
M440PB/G
P440PB/G
12
24
36
42
800
800
800
800
185
185
185
185
630
630
630
630
355 mm
155 mm
400TB or
440TB
connector
410 mm
440PB
coupling
connector
1
2
8
3
4
5
9
7
6
10
11
13. 11
Kit contents
The complete
(K)(M)(P)440PB/G coupling
connector kit comprises 3 x the
following components:
The kit also comprises silicone grease, field
control mastic, installation rod, installation
instructions and crimp chart.
For use with
copper tape
screened cables.
Order: Kit MT.
For use with
easy strip semi-conductive
screened cables. Order:
Field control mastic
(type MFC).
For use with copper
wire screened cables.
No earthing
device is
necessary.
For use with
other cable types.
Please contact our
representative.
For outdoor
applications.
Order: +MWS.
Connector housing
(K)(M)(P)440BP/G
For use with fabric tape
(graphite) screened cables.
Order additional
semi-conductive tape
(type TSC).
3 x (K)(M)(P)440PB/G-W-X
coupling connector kit
Conductor
contact TMBC-X
Conductor
contact TBC-X
Ordering instructions
To order the coupling connector,
select the ordering part number
which gives you the best
centring of your core insula-
tion diameter and substitute X
using table X, according to your
conductor size and type.
Add a 'K' for use up to 24 kV,
add an 'M' for use up to 36 kV,
add a 'P' for use up to 42 kV.
Example:
The copper wire screened cable
is 36 kV, 240 mm2 stranded
aluminium with a diameter over
core insulation of 37.0 mm.
Order 3 x M440PB/G-32-
240(K)M-12-2 coupling
connector kit.
Ordering
part number
Dia. over core insulation (mm)
min max
3 x 440PB/G-22-X
3 x 440PB/G-27-X
3 x 440PB/G-32-X
3 x 440PB/G-37-X
3 x 440PB/G-43-X
23.5
28.5
34.0
39.0
45.5
31.0
37.5
42.5
48.5
56.0
Table W
Contact rod
440PB-CR
+ M16 stud
Cable reducer
611CA-W
Table X
Conduc-
tor sizes
(mm2)
Aluminium conductor
Aluminium and copper
conductor
Copper
conductor
DIN
hexagonal
Deep
indent
Bolted
DIN
hexagonal
185
240
300
400
500
630
185(K)M-12-2
240(K)M-12-2
300(K)M-12-2
400(K)M-12-2
500(K)M-12-2
–
185KM-12-1
240KM-12-1
300KM-12-1
400KM-12-1
500KM-12-1
630KM-12-1
185(K)M-11-2
240(K)M-11-2
300(K)M-11-2
400(K)M-11-2
500(K)M-11-2
630(K)M-11-2
14. 12
04/2015
Application
Surge arrester designed
to protect medium voltage
components, including
transformers, equipment, cable
and accessories from high
voltage surges resulting from
lightning or switching.
Up to 36 kV
400PB-XSA
INTERFACE C
SURGE ARRESTER
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
20.8/36 (42) kV
Technical characteristics
• This surge arrester is a metal
oxide varistor surge arrester in
an elbow configuration.
• Each arrester is tested for AC
withstand, partial discharge
and critical voltage prior to
leaving the factory.
4
1
2
3
8
7
6
5
9
247 mm
145 mm
Dia.
80 mm
L2
L1
Dia.
70 mm
Design
Surge arrester comprising:
1. Conductive EPDM insert.
2. Conductive EPDM jacket.
3. Insulating EPDM layer
moulded between the insert
and the jacket.
4. Contact rod.
5. Earthing lead.
6. Earth connection.
7. Steel cap.
8. Metal oxide valve elements.
9. Type C - 630 A interface
as described by CENELEC
EN 50180 and 50181.
Specifications and
standards
The 400PB-XSA surge arresters
meet the test requirements of
IEC 60099-4.
Surge
arrester
type
Nominal
discharge
current
In (kA)
Rated
voltage
Ur (kV)
Max. continuous
operating
voltage
Uc (kV)
Dimensions
(mm)
L1 L2
400PB-5SA-15L
400PB-5SA-18L
400PB-5SA-22L
400PB-5SA-24L
400PB-5SA-30L
400PB-10SA-6N
400PB-10SA-9N
400PB-10SA-12N
400PB-10SA-15N
400PB-10SA-18N
400PB-10SA-22N
400PB-10SA-24N
400PB-10SA-30N
400PB-10SA-33N
400PB-10SA-36N
400PB-10SA-45N
400PB-10SA-51N
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
15
18
22
24
30
6
9
12
15
18
22
24
30
33
36
45
51
12.0
14.4
17.6
19.2
24.0
4.8
7.2
9.6
12.0
14.4
17.6
19.2
24.0
26.4
28.8
36.0
40.8
260
260
360
360
360
260
260
260
260
260
260
360
360
360
360
460
460
300
300
400
400
400
300
300
300
300
300
300
400
400
400
400
500
500
15. 13
Typical applications and
dimensions
Ordering instructions
To order the surge arrester,
specify the surge arrester type,
as described on previous page.
Example:
For a maximum continuous
operating voltage (r.m.s.) of
24 kV and a nominal discharge
current of 10 kA.
Order a 400PB-10SA-30N
surge arrester.
Technical data
185 mm
410 mm
220 mm
Type
400TB
or 440TB
tee connector
Type 400PB-5SA
or 400PB-10SA
surge arrester
Surge
arrester
type
Steep current
residual
voltage @ 10 kA
[1/20 µs] (kV)
Lightning current
residual voltage
[8/20 µs] (kV)
Switching impulse
residual voltage
[36/90 µs] (kV)
High current
impulse
withstand
(kA)
@ 5 kA @ 10 kA @ 20 kA @ 125 A @ 500 A
400PB-5SA-15L
400PB-5SA-18L
400PB-5SA-22L
400PB-5SA-24L
400PB-5SA-30L
400PB-10SA-6N
400PB-10SA-9N
400PB-10SA-12N
400PB-10SA-15N
400PB-10SA-18N
400PB-10SA-22N
400PB-10SA-24N
400PB-10SA-30N
400PB-10SA-33N
400PB-10SA-36N
400PB-10SA-45N
400PB-10SA-51N
47.1
56.5
69.2
75.2
94.0
20.4
28.5
38.0
48.1
58.1
70.1
77.0
97.0
103.4
115.9
144.1
166.0
38.9
46.7
57.1
62.1
77.6
16.8
23.5
31.4
39.7
48.0
57.9
63.6
80.1
85.4
95.7
119.0
137.1
42.3
50.8
62.2
67.6
84.5
18.3
25.6
34.2
43.2
52.2
63.0
69.2
87.2
93.0
104.2
129.5
149.2
47.4
56.9
69.7
75.8
94.7
20.5
28.7
38.3
48.4
58.5
70.6
77.6
97.7
104.2
116.8
145.1
167.2
29.8
35.8
43.8
47.7
59.6
12.9
18.0
24.1
30.5
36.8
44.4
48.8
61.5
65.6
73.5
91.3
105.2
31.8
38.2
46.7
50.8
63.5
13.7
19.2
25.7
32.5
39.2
47.3
52.0
65.5
69.9
78.3
97.3
112.1
65
65
65
65
65
100
100
100
100
100
100
100
100
100
100
100
100
Note: the surge arrester body needs to
be positioned vertically after installation.
16. 14
08/2014
400TR and 400TR-LB
INTERFACE C
TEST RODS
Application
• The test rod can be used for:
- cable fault location
- cable testing
- phasing checks, etc.
• Connections may be made
with a cable lug, a 4 mm
plug or spring clips.
Installation
The test rod is mounted on
to the clamping screw in
the type C interface tee and
coupling connectors. The
test cable is connected to
the threaded stem and the
insulating shroud moved to its
final position over the end of
the test rod.
Design
1. Insulating shroud.
2. Threaded rod for test
connection.
3. Two nuts M12.
4. Insulation.
5. Copper test rod stem.
6. Wing nut.
An insulating shroud is
provided to allow the
application of test voltages
when bushings are closely
spaced.
Test rod
type
Maximum A.C.
test voltage
(50 Hz - 1 min)
Maximum D.C.
test voltage
(8 x U0 - 30 min)
Impulse voltage
(1.2 x 50 µs)
min
400TR
400TR-LB
36 kV
36 kV
96 kV
96 kV
95 kV
95 kV
Technical characteristics
• The 400TR test rod can be
used with 400TE, 400TB and
440TB connectors.
• The 400TR-LB is for use with
the 400LB connector.
In mm.
400TR 400TR-LB
Ordering instructions
Simply specify:
400TR or 400TR-LB test rod.
465
310
M10
Dia.
25
60
1
2
6
4
5
1
2
4 288
480
403
5
M12
17. 15
400TK and 400SW
INSTALLATION TOOLS
Application
• The box spanner and box
spanner key are designed
to facilitate assembly of
400TE, 400TB and 440TB
connectors.
• The 400TK box spanner is
used to install the 400TEF
clamping pin contact or
400TCS clamping screw.
Ordering instructions
Simply specify:
- 400TK box spanner
- 400SW box spanner key
• The 400SW box spanner
key fits on the hex nut of the
400BIPA basic insulating
plug.
400TK
400SW
18. 16
08/2014
ACCESSORIES
INTERFACE C
Up to 36 kVApplication
For use with connectors and
bushings with an interface C
as described by CENELEC EN
50180 and 50181.
Technical characteristics
All these products, except the
earthing plugs, are tested for
AC withstand and partial
discharge prior to leaving
the factory.
400SOP-B
Stand-off plug
Is designed to support and
'dead-end' connectors with a
type C interface when removed
from equipment.
Ordering instructions
Order
400SOP-B for 12 kV,
K400SOP-B for 24 kV,
M400SOP-B for 36 kV or
P400SOP-B for 42 kV
applications.
400GP-B
Earthing plug
Is designed to support and
earth connectors with a type C
interface when removed from
equipment.
Ordering instructions
Order
400GP-B for 12, 24, 36 or
42 kV applications.
400DR-B/G
Dead-end receptacle
Fits over a bushing with a type
C interface to provide 'dead-
end' facility. The dead-end
receptacle is supplied with an
earth lead.
Ordering instructions
Order
400DR-B/G for 12 kV,
K400DR-B/G for 24 kV or
M400DR-B/G for 36 kV
applications.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
20.8/36 (42) kV
19. 17
Kit MT
Earthing kit for copper
tape screened cables
Contains a tinned copper braid
(25 mm² - L = 500 mm), a
tinned copper wire for cleating
and some water sealing mastic.
Ordering instructions
Order
Kit MT for 12 kV, 24 kV
36 kV or 42 kV applications.
400RTPA
Reducing tap plug
Provides a type A interface
to connectors with a type C
interface.
A 'C' spanner, 600SW, is used
to tighten the reducing tap plug
on to its mating part.
Ordering instructions
Order
400RTPA for 12 kV or
K400RTPA for 24 kV
applications.
Order 600SW for the 'C'
spanner.
400CP-SC
Connecting plug
For connecting two or more
connectors with a type C
interface together, thus creating
a separable cable joint or a
multiple cable connection to
equipment.
Ordering instructions
Order
400CP-SC for 12 kV,
K400CP-SC for 24 kV or
M400CP-SC for 36 kV
applications.
440CP
Connecting plug
For connecting two or more
440TB connectors, thus creating
a separable cable joint or a
multiple cable connection to
equipment.
For use up to 1250 A.
Only for use with 440TB.
Ordering instructions
Order
440CP for 12 kV,
K440CP for 24 kV or
M440CP for 36 kV
applications.
Order (K)(M)440CP + 676SA
for connection to an already
installed 440TB connector.
400BIPA
Basic insulating plug
Acts as a tightening nut for
the 400TB and 440TB tee
connector kits.
The plug contains a voltage
detection point.
The conductive rubber
protection cap is included.
Ordering instructions
Order
400BIPA for 12 kV,
K400BIPA for 24 kV
M400BIPA for 36 kV or
P400BIPA for 42 kV
applications.
400BE/G
Bushing extender
Provides an extension piece
to allow cables to stand away
from equipment.
Is used in conjunction with the
400CP, 440CP or 440PB. The
bushing extender is supplied
with an earth lead.
Ordering instructions
Order 400BE/G for 12 kV,
K400BE/G for 24 kV,
M400BE/G for 36 kV or
P400BE/G for 42 kV
applications.
20. 18
08/2014
400TB/G
Single cable arrangement.
Order 400TB/G for 12 kV,
K400TB/G for 24 kV,
M400TB/G for 36 kV
or P400TB/G for 42 kV
applications.
400TB/G-P2
Dual cable arrangement.
Order 400TB/G-P2 for 12 kV,
K400TB/G-P2 for 24 kV or
M400TB/G-P2 for 36 kV
applications.
400TB/G-L2
2-way connection.
Order 400TB/G-L2 for 12 kV,
K400TB/G-L2 for 24 kV or
M400TB/G-L2 for 36 kV
applications.
400BE+440PB
Connector standing away from
equipment.
Order 400BE+440PB for 12 kV,
K400BE+440PB for 24 kV,
M400BE+440PB for 36 kV or
P400BE+440PB for 42 kV
applications.
250
tee
connector
basic
insulating
plug
110
500
110 245
basic
insulating
plug
connecting
plug
POSSIBLE ARRANGEMENTS
INTERFACE C
In mm.
400
410
400BE
bushing extender
265
21. 19
In mm.
400TB/G-L4
Disconnectable tap-off.
Order 400TB/G-L4 for 12 kV,
K400TB/G-L4 for 24 kV or
M400TB/G-L4 for 36 kV
applications.
400TB/G-L5
2-way connection with tap-off.
Order 400TB/G-L5 for 12 kV
or K400TB/G-L5 for 24 kV
applications.
505
400TB/G-L3
3-way connection.
Order 400TB/G-L3 for 12 kV,
K400TB/G-L3 for 24 kV or
M400TB/G-L3 for 36 kV
applications.
22. 20
In mm.
Cable and equipment
testing
Connector on earthing
plug
Order 400GP-B for 12 kV,
24 kV and 36 kV applications.
Connector on stand-off
plug
Order 400SOP-B for 12 kV,
K400SOP-B for 24 kV or
M400SOP-B for 36 kV
applications.
400TB/G tee
connectorstand-off
plug
400BIPA
basic
insulating
plug
400
155
410
440TB+440PB-P2
Dual cable arrangement.
Order 440TB/G+440PB/G-P2
for 12 kV, K400TB/G+K440PB/
G-P2 for 24 kV, M400TB/
G+M440PB/G-P2 for 36 kV,
P400TB/G+P440PB/G-P2 for
41,5 kV.
23.
24. 08/2014
Additional catalogue information on power cable accessories
is available by contacting us at the address below:
Distributed by:
a Nexans company
Nexans Network Solutions N.V. - Div. Euromold
Zuid III, Industrielaan 12, B-9320 Erembodegem
Tel.: +32 (0)53 85 02 11 • sales.euromold@nexans.com • www.euromold.be
Catalogue also available on CD-ROM, Website and Mobile Apps