This document provides product information for Nexans Power Accessories' cold-shrinkable indoor and outdoor cable terminations (ITK, OTK), slip-on indoor terminations (AIN), and associated accessories. It lists the specifications, standards, contents and ordering instructions for termination kits for voltages up to 42kV and cable sizes up to 1000mm2. Installation drawings and diagrams are provided for the different termination types.
Modern underground power cables are sophisticated assemblies of insulators, conductors and protective materials. Within these components are sensors, which enable cable operators to monitor conditions along the cable in real time.
The condition of the cable insulation is usually monitored through the following two main methods:
Loss tangent measurements
Partial discharge (PD) measurements
Heat shrink cable joints to suit PVC, EPR (BS6883) and XLPE (BS5467) multi-core cables up to 3.3kV - the heat shrink cable joint comprises of adhesive lined connector insulation tubes, heavy duty steel wire armour earth cage, armour support rings and clamps and an outer thick wall adhesive lined heat shrink tube.
SPS Heat Shrink Cable Joints & Cable Terminations - Quality Performance Testing : Shrink Polymer Systems heat shrink cable joints and cable termination kits are tested to BS7888 which incorporates Cenelec Standards HD 628 S1 and 629.1 S2 : 2006, DIN VDE0279 and IEC60502.
SPS High Voltage Cable Termination Kit List (Typical) - Three Core Cables
XLPE EPR HV Termination Kits
Anti-track heat shrink 3 core tubes x 3
Stress control heat shrink 3 core tubes x 3
Yellow stress relief tape for screen ends x 3
3 core heat shrink cable breakout boot x 1
Red mastic sealing tape x 1
Cable cleaning and de-greasing wipes x 3
Box, label, jointing instructions x 1
HV Termination Kits Optional Extras, 3 Core 6.6-7.2kV - Solderless Earth Kit for Copper Tape Screen Cables, Insulating Bushing Boots (Straight, Right Angled, Universal), HV Cable Glands for SWA Cable (Bolt-on Top Hat), Outdoor Armour Earthing Kit, Outdoor Stand-off Brackets + Insulators, High Voltage HV Cable Lugs (Crimp or Mechanical Shearbolt Lugs).
SPS High Voltage Heat Shrink Cable Termination Kits, 6.6-7.2kV - Testing
SPS high voltage heat shrink termination kits for 3 core HV cables (XLPE and EPR) are Tested and Certified to latest International Test Standards as outlined in Cenelec standards HD 628 S1 and 629.1 S2 : 2006 - high voltage cable termination kit testing also encompasses VDE 0278 and IEC 60502.
Modern underground power cables are sophisticated assemblies of insulators, conductors and protective materials. Within these components are sensors, which enable cable operators to monitor conditions along the cable in real time.
The condition of the cable insulation is usually monitored through the following two main methods:
Loss tangent measurements
Partial discharge (PD) measurements
Heat shrink cable joints to suit PVC, EPR (BS6883) and XLPE (BS5467) multi-core cables up to 3.3kV - the heat shrink cable joint comprises of adhesive lined connector insulation tubes, heavy duty steel wire armour earth cage, armour support rings and clamps and an outer thick wall adhesive lined heat shrink tube.
SPS Heat Shrink Cable Joints & Cable Terminations - Quality Performance Testing : Shrink Polymer Systems heat shrink cable joints and cable termination kits are tested to BS7888 which incorporates Cenelec Standards HD 628 S1 and 629.1 S2 : 2006, DIN VDE0279 and IEC60502.
SPS High Voltage Cable Termination Kit List (Typical) - Three Core Cables
XLPE EPR HV Termination Kits
Anti-track heat shrink 3 core tubes x 3
Stress control heat shrink 3 core tubes x 3
Yellow stress relief tape for screen ends x 3
3 core heat shrink cable breakout boot x 1
Red mastic sealing tape x 1
Cable cleaning and de-greasing wipes x 3
Box, label, jointing instructions x 1
HV Termination Kits Optional Extras, 3 Core 6.6-7.2kV - Solderless Earth Kit for Copper Tape Screen Cables, Insulating Bushing Boots (Straight, Right Angled, Universal), HV Cable Glands for SWA Cable (Bolt-on Top Hat), Outdoor Armour Earthing Kit, Outdoor Stand-off Brackets + Insulators, High Voltage HV Cable Lugs (Crimp or Mechanical Shearbolt Lugs).
SPS High Voltage Heat Shrink Cable Termination Kits, 6.6-7.2kV - Testing
SPS high voltage heat shrink termination kits for 3 core HV cables (XLPE and EPR) are Tested and Certified to latest International Test Standards as outlined in Cenelec standards HD 628 S1 and 629.1 S2 : 2006 - high voltage cable termination kit testing also encompasses VDE 0278 and IEC 60502.
Cable Lugs and Terminals are electrical connectors used for connecting or terminating electrical cables to electrical appliances, transformers, junction boxes, control panels, etc. Connectors are also used for joining two power cables together. A lug has two ends, a tubular end through which cable is inserted and a flattened end which is bolted to the appliance or surface. After cable insertion, the lug can be crimped with a crimping tool or soldered or welded. Lugs come in different sizes corresponding to cable size and sizes are marked on the palm area of the lug. Suitable tool and die set is used to crimp them to cable or wire. The terminal ends are usually made of copper or aluminium and comes in different sizes and current carrying capacities. Proper care has to be taken and selection done according to low voltage or medium voltage requirements.
UNIT - 05 DISTRIBUTION LINES AND TRANSFORMER CENTREPremanandDesai
Code of practice for Distribution Lines and Transformer centre, types of transformer centres -
Pole mounted, plinth mounted, indoor and outdoor types. Determining the rating of
Distribution Transformer. Write Specifications of the Distribution Transformer. Draw the
SLD of a Transformer centre indicating the size of protective devices, Prepare the schedule of
equipments /Materials with specifications for a 11KV/415V,100 KVA transformer centre and
their estimates, 415 V LT line materials and specifications , method of calculating various LT
line materials (only). Prepare the schedule of materials (only) for 3 phase 4 wire LT line,
11 KV HT Line-materials and their specifications, method of calculating various HT line
materials and tapping structure, TOPO sheet and its use, Concept of combined estimates.
Prepare the schedule of materials (only) for 11 KV single circuit HT line for Rural
Electrification.
(Note: HT lines over head type only)
瑞侃工具包电缆终端-阿克巴交易
케이블 종단-거
TERMINAZIONE DEL CAVO - AKBAR TRADING
TERMINACIÓN DE CABLE - AKBAR TRADING
KABELABSCHLUSS
TERMINACIÓN DE CABLE
KABLO SONLANDIRMA
Power cable selection, cable selection Methodology wessam alaslmi
Cable installation and Selection Methodology according to IEC code supported with an example of how to do so.
Explain what practical environment requires when establishing a new facility requires electricity.
explain the purpose of the selected cable.
explain when to use the cable carrier types.
explain how to carry out calculations of such thing.
Do công ty LS Cable sản xuất tại Hàn Quốc. Sản phẩm này thuộc nhóm sản phẩm chất lượng cao cấp nhất trên thế giới (dùng lớp cách điện Epoxy theo công nghệ nhúng của Mỹ), và chất lượng ngang hàng với các nhà sản xuất Mỹ / EU. Sản phẩm này cung cấp cho Sân bay Changi Singapore là công trình lớn nhất S.E.A, và công trình Keangnam Landmark Hà nội ( là công trình lớn nhất tại Việt nam). Hiện tại sản phẩm này đang được bán đại trà trên toàn thế giới, và thuộc top 5 nhà sản xuất hàng đầu thế giới. Đây cũng là sản phẩm cao cấp nhất được cung cấp tại Việt Nam với thời gian bảo hành lên đến 2 năm kể từ ngày đóng điện an toàn. Hiện LS Cable đã cung cấp hơn 50 công trình tại VN, trong đó có những công trình tiêu biểu như : Royal City, Time City, Crowne Plaza HN, Petroland Tower HCM, Petrovietnam Power Landmark, Crescent Mall HCM, Bệnh viện Đại Học Y Dược, Bệnh Viện Đa Khoa Hoàn Mỹ, Bệnh Viện Miền Đông, Diamond Island HCM, Kenton Residence HCM, Dargon Hill Residence, Riverside Residence Phú Mỹ Hưng, River Park Phú Mỹ Hưng, Saigon Airport Plaza, Khách sạn Grand, Khách sạn 5 sao Le Meriden, Royal City HN, Sail Tower ….Sản phẩm này cũng chiếm thị phần số 1 tại Singapore hiện nay.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...AKBAR TRADING
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
Cable Lugs and Terminals are electrical connectors used for connecting or terminating electrical cables to electrical appliances, transformers, junction boxes, control panels, etc. Connectors are also used for joining two power cables together. A lug has two ends, a tubular end through which cable is inserted and a flattened end which is bolted to the appliance or surface. After cable insertion, the lug can be crimped with a crimping tool or soldered or welded. Lugs come in different sizes corresponding to cable size and sizes are marked on the palm area of the lug. Suitable tool and die set is used to crimp them to cable or wire. The terminal ends are usually made of copper or aluminium and comes in different sizes and current carrying capacities. Proper care has to be taken and selection done according to low voltage or medium voltage requirements.
UNIT - 05 DISTRIBUTION LINES AND TRANSFORMER CENTREPremanandDesai
Code of practice for Distribution Lines and Transformer centre, types of transformer centres -
Pole mounted, plinth mounted, indoor and outdoor types. Determining the rating of
Distribution Transformer. Write Specifications of the Distribution Transformer. Draw the
SLD of a Transformer centre indicating the size of protective devices, Prepare the schedule of
equipments /Materials with specifications for a 11KV/415V,100 KVA transformer centre and
their estimates, 415 V LT line materials and specifications , method of calculating various LT
line materials (only). Prepare the schedule of materials (only) for 3 phase 4 wire LT line,
11 KV HT Line-materials and their specifications, method of calculating various HT line
materials and tapping structure, TOPO sheet and its use, Concept of combined estimates.
Prepare the schedule of materials (only) for 11 KV single circuit HT line for Rural
Electrification.
(Note: HT lines over head type only)
瑞侃工具包电缆终端-阿克巴交易
케이블 종단-거
TERMINAZIONE DEL CAVO - AKBAR TRADING
TERMINACIÓN DE CABLE - AKBAR TRADING
KABELABSCHLUSS
TERMINACIÓN DE CABLE
KABLO SONLANDIRMA
Power cable selection, cable selection Methodology wessam alaslmi
Cable installation and Selection Methodology according to IEC code supported with an example of how to do so.
Explain what practical environment requires when establishing a new facility requires electricity.
explain the purpose of the selected cable.
explain when to use the cable carrier types.
explain how to carry out calculations of such thing.
Do công ty LS Cable sản xuất tại Hàn Quốc. Sản phẩm này thuộc nhóm sản phẩm chất lượng cao cấp nhất trên thế giới (dùng lớp cách điện Epoxy theo công nghệ nhúng của Mỹ), và chất lượng ngang hàng với các nhà sản xuất Mỹ / EU. Sản phẩm này cung cấp cho Sân bay Changi Singapore là công trình lớn nhất S.E.A, và công trình Keangnam Landmark Hà nội ( là công trình lớn nhất tại Việt nam). Hiện tại sản phẩm này đang được bán đại trà trên toàn thế giới, và thuộc top 5 nhà sản xuất hàng đầu thế giới. Đây cũng là sản phẩm cao cấp nhất được cung cấp tại Việt Nam với thời gian bảo hành lên đến 2 năm kể từ ngày đóng điện an toàn. Hiện LS Cable đã cung cấp hơn 50 công trình tại VN, trong đó có những công trình tiêu biểu như : Royal City, Time City, Crowne Plaza HN, Petroland Tower HCM, Petrovietnam Power Landmark, Crescent Mall HCM, Bệnh viện Đại Học Y Dược, Bệnh Viện Đa Khoa Hoàn Mỹ, Bệnh Viện Miền Đông, Diamond Island HCM, Kenton Residence HCM, Dargon Hill Residence, Riverside Residence Phú Mỹ Hưng, River Park Phú Mỹ Hưng, Saigon Airport Plaza, Khách sạn Grand, Khách sạn 5 sao Le Meriden, Royal City HN, Sail Tower ….Sản phẩm này cũng chiếm thị phần số 1 tại Singapore hiện nay.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...AKBAR TRADING
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
400 Series Interface C Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Nexans Euromold Connectors Interface D 600 Series
Nexans Euromold 675LR Connector
1250A 11kV Dead Break Connectors 35-800sqmm
Nexans Euromold 675LR connector suits 11kV/12kV polymeric insulated cables (XLPE EPR), rated up to 1250amps with copper or aluminium conductors 35-800sqmm.
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 1250amp (copper stud) application separable connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" copper, 600 series bushings.
Nexans Euromold Connectors Interface D 600 Series
Nexans Euromold 650LR Connector
800A 11kV Dead Break Connectors 35-630sqmm
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 800amp (aluminium stud) application separable connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" aluminium stud, 600 series bushings.
Nexans Euromold K650LR connector suits 24kV polymeric insulated cables (XLPE EPR), rated up to 800amps with copper or aluminium conductors 35-630sqmm.
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 800amp (aluminium stud) application separable Nexans Euromold connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" aluminium stud, 600 series bushings.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Euromold Connectors 400 Series Interface Type C Bushing - 630Amp
* Connector Type : M16 Bolted Copper Insert
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 630amps
* Specification : CENELEC EN50180 & EN50181
Euromold 430TB Elbow Connectors are used with 400 Series Interface C Bushing.
Similar to Nexans Cable Terminations - Heat Shrink, Cold Shrink, Slip-On (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
2. 1
11/2012
NEXANS
POWER ACCESSORIES
While every care is taken to ensure that the information contained
in this publication is correct, no legal responsibility can be accepted
for any inaccuracy. Nexans Power Accessories Ltd. reserves the right
to alter or modify the characteristics of its products described in this
catalogue as standards and technology evolve.
Nexans Power Accessories
Nexans is the leading
European specialised designer,
manufacturer and distributor
of prefabricated cable acces-
sories for medium voltage
energy distribution. It provides
a complete range of acces-
sories for underground cables:
pre-moulded EPDM or silicone
rubber connectors, terminations
and joints for cables and epoxy
bushings for transformers and
switch gear, as well as a large
range of cold-shrinkable
terminations and joints from 12
to 42 kV.
Nexans is also the manufactur-
er of electrical components for
the high voltage accessories.
ISO 9001 Certificate
Since 1992, Nexans’
commitment to quality is
demonstrated by its ISO 9001
certification.
Laboratory accreditation
Since June 2000, Nexans’
independent ELAB laboratory
obtained the BELTEST accredi-
tation no.192-T-ISO 17025
conform with the European
standards for laboratories ISO
17025 for electrical testing of
medium voltage cable acces-
sories according to the Inter-
national standards IEC 61442
and HD 629.
International standards
All our products meet the
International standards like
CENELEC HD 629.1, CENELEC
EN 50180, IEC 137, IEEE 386
& 404… or country specifica-
tions. Official certificates, CESI,
KEMA, ATEX… prove the con-
formity of our products. Long
duration tests of existing or
new products are continuously
performed in our test fields.
3. 3
11/2012
TERMINATIONS
Table of contents
ITK - cold-shrinkable indoor termination
OTK - cold-shrinkable outdoor termination
AIN - slip-on indoor termination
AFN - slip-on outdoor termination
SREI - single core XLPE indoor termination
SREF - single core XLPE outdoor termination
SRDI - three core XLPE indoor termination
SRDF - three core XLPE outdoor termination
SPDI - three core PILC indoor termination
SPDF - three core PILC outdoor termination
15TS - universal bushing boot
FB1 - flexible bushing boot
RAB/SB - heat-shrinkable bushing boot
SE - XLPE solderless earth connection
CK - PILC solderless earth connection
HSGK - top hat gland kit
XCK-HSS - Multi core heat-shrink breakout kit
4. 4
11/2012
ITK
COLD-SHRINKABLE
INDOOR TERMINATION
Application
A kit of 3 terminations for
use indoors in controlled
environmental conditions and
subject to light condensation.
To connect polymeric insulated
cable to equipment.
Design
Indoor termination comprising:
1. Cable lug (not included in
the standard kit).
2. Water sealing mastic.
3. Silicone tube.
4. Stress control mastic.
5. Conductive EPDM ring.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
Termination
type
Voltage
Um
(kV)
Strike
distance L
(mm)
Diameter over
core insulation
(mm)
Conductor
sizes
(mm2)
min. max. min. max.
ITK 212
ITK 312
ITK 224
ITK 324
12
12
24
24
260
300
260
300
14
30
14
30
33
50
33
50
50
400
25
300
400
1000
240
800
Up to 24 kV
3
1
2
4
5
2
5. 5
Kit contents
The complete ITK termination
kit comprises the following
components:
Ordering instructions
Select the part number
corresponding to both the
system voltage and the cable
insulation diameter in mm.
Example:
The copper wire screened
cable is 12 kV, 150 mm2
stranded aluminium.
The diameter over core
insulation is 26.2 mm.
Order a 3 x ITK 212
termination kit.
For use with copper
wire screened cables.
No earthing
device is
necessary.
For use with
copper tape
screened cables.
Also order a Kit MT.
3 x Factory preassembled silicone tubes
comprising stress relief and sealing mastic.
3 x ITK 212 or ITK 224
termination kit
All commercialised European standard
cable lugs can be used.
Cable lugs should be within the dimensions
specified (not applicable for ITK 312 and
ITK 324).
Ordering
part
number
Voltage
Um
(kV)
Diameter over
core insulation
(mm)
Conductor
sizes
(mm2)
min. max. min. max.
3 x ITK 212
3 x ITK 312
3 x ITK 224
3 x ITK 324
12
12
24
24
14
30
14
30
33
50
33
50
50
400
25
300
400
1000
240
800
=
The kit also comprises water sealing mastic
and installation instructions.
3 x Factory preassembled silicone tubes
comprising stress relief and sealing mastic.
3 x ITK 312 or ITK 324
termination kit
=
Can be supplied with
all common types of
cable lugs.
For use with Alupe or
C 33-226 cables.
Please contact our
representative.
For use with
three-core cables:
see T-ITK.
If the cable lug barrel
diameter (A) is less
than 20 mm:
order a rubber
adapting sleeve.
6. 6
11/2012
OTK
COLD-SHRINKABLE
OUTDOOR TERMINATION
Application
A kit of 3 terminations for
use outdoors and exposed to
prolonged sunshine and other
weather conditions.
To connect polymeric insulated
cable to equipment and for
the outdoor terminating on to
overhead lines or bus bars.
Design
Outdoor termination
comprising:
1. Cable lug (not included in
the standard kit).
2. Water sealing mastic.
3. Sheds which can be installed
upwards or down.
4. Silicone tube with sheds.
5. Silicone tube.
6. Stress control mastic.
7. Conductive EPDM ring.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1.
Up to 24 kV
Termination
type
Voltage
Um
(kV)
Creepage
distance A-B
(mm)
Strike
distance “L”
(mm)
Diameter over
core insulation
(mm)
Number
of sheds
Conductor
sizes
(mm2)
Fig.
no.
min. max. min. max.
OTK 212
OTK 312
OTK 224
OTK 324
12
12
24
24
420
890
600
890
300
650
400
650
14
30
19
30
33
50
33
50
3
6
5
6
50
500
50
300
400
1000
240
630
1
3
2
3
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
4
1
7
3
2
6
2
1
4
3
5
2
6
2
7
1
4
3
5
2
6
2
7
Fig. 1 Fig. 2 Fig. 3
7. 7
3 x Factory preassembled silicone tubes
comprising stress relief and sealing mastic.
3 x Silicone tube with 5 sheds
3 x Silicone tube with 6 sheds
3 x Factory preassembled silicone tubes
comprising stress relief and sealing mastic.
3 x Factory preassembled silicone tubes
comprising stress relief and sealing mastic.
Ordering instructions
Select the part number
corresponding to both the
system voltage and the cable
insulation diameter in mm.
Example:
The copper wire screened
cable is 24 kV, 150 mm2
stranded aluminium.
The diameter over core
insulation is 26.2 mm.
Order a 3 x OTK 224
termination kit.
All commercialised European standard
cable lugs can be used.
Cable lugs should be within the dimensions
specified (not applicable for OTK 312 and
OTK 324).
Ordering
part
number
Voltage
Um
(kV)
Diameter over
core insulation
(mm)
Conductor
sizes
(mm2)
min. max. min. max.
3 x OTK 212
3 x OTK 312
3 x OTK 224
3 x OTK 324
12
12
24
24
14
30
19
30
33
50
33
50
50
500
50
300
400
1000
240
800
Kit contents
The complete OTK termination
kit comprises the following
components:
The kit also comprises water sealing mastic
and installation instructions.
3 x OTK 224
termination kit
=+
+
For use with copper
wire screened cables.
No earthing
device is
necessary.
For use with
copper tape
screened cables.
Also order a Kit MT.
For use with fabric tape
(graphite) screened cables.
Order additional
semi-conductive tape
(type TSC).
For use with Alupe or
C 33-226 cables.
Please contact our
representative.
For use with
three-core cables:
see T-OTK.
Can be supplied with
all common types of
cable lugs.
3 x OTK 312
or
3 x OTK 324
termination kit
=
3 x OTK 212
termination kit
=
8. 8
11/2012
AIN
SLIP-ON
INDOOR TERMINATION
Application
A kit of 3 terminations for
use indoors in controlled
environmental conditions and
subject to light condensation.
Provides a simple and quick
method of stress relieving on
screened polymeric cables.
Design
Indoor termination comprising:
1. Cable lug (not included in
the standard kit).
2. High flexibility silicone
rubber housing, allowing
larger tolerances on cable
insulation diameters, with
integrated conductive rubber
insert, providing stress relief.
3. Earthing lug (not included in
the standard kit).
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Up to 42 kV
Termination
type
Voltage
Um
(kV)
Conductor sizes
(mm2)
min. max.
AIN 10
AIN 20
AIN 30
AIN 36
12
24
36
42
25
35
50
150
1000
1000
800
800
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
20.8/36 (41.5) kV
1
2
3
9. 9
For use with copper
wire screened cables.
No earthing
device is
necessary.
For use with
copper tape
screened cables.
Order: -/MT.
For use with
three-core cables.
Please contact our
representative.
For use with other
cable types.
Please contact our
representative.
Can be supplied with
all common types of
cable lugs.
No heating or flame
is required.
Example:
A set of 3 indoor terminations
for a 24 kV - 240 mm2 stranded
aluminium cable with copper wire
screen without cable lugs.
The diameter over core insulation
is 30.4 mm.
Order a 3 x AIN 20-2
termination kit.
Ordering instructions
Select the part number
corresponding to both the
system voltage and the cable
dimensions in mm.
Kit contents
A kit always comprises
3 termination housings,
installation instructions, special
lubricant, wiper, adhesive tape,
field control mastic, ...
Voltage
Um
(kV)
Conductor
sizes
(mm2)
Diameter over
core insulation
(mm)
Number
of sheds
L
(mm)
Dia. D
(mm)
Ordering
part number
min max min max
12
25
120
300
630
95
240
500
800
12.7
19.0
27.0
34.0
39.0
46.0
21.0
28.5
37.0
46.0
50.0
58.0
2
2
2
3
7
7
150
150
150
225
405
405
37
43
60
68
98
98
3 x AIN 10-1
3 x AIN 10-2
3 x AIN 10-3
3 x AIN 20-4
3 x AIN 36-5
3 x AIN 36-6
1000
1200
24
35
95
300
400
630
1000
70
240
500
630
800
1200
18.0
22.5
31.0
34.0
39.0
46.0
23.5
33.0
41.0
46.0
50.0
58.0
3
3
3
3
7
7
225
225
225
225
405
405
47
56
68
68
98
98
3 x AIN 20-1
3 x AIN 20-2
3 x AIN 20-3
3 x AIN 20-4
3 x AIN 36-5
3 x AIN 36-6
36
50
95
240
400
630
70
240
400
630
1000
23.5
27.0
32.0
39.0
46.0
29.0
38.0
43.0
50.0
58.0
6
6
6
7
7
300
300
300
405
405
74
74
81
98
98
3 x AIN 30-1
3 x AIN 30-2
3 x AIN 30-3
3 x AIN 36-5
3 x AIN 36-6
42
150
400
630
300
630
1000
31.5
39.0
46.0
41.0
50.0
58.0
7
7
7
405
405
405
98
98
98
3 x AIN 36-4
3 x AIN 36-5
3 x AIN 36-6
Cable lugs and earthing lugs are
not included in the standard kit,
but can be ordered separately.
10. 10
11/2012
AFN
SLIP-ON
OUTDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
20.8/36 (41.5) kV
Up to 42 kVApplication
A kit of 3 terminations for
use outdoors and exposed to
prolonged sunshine and other
weather conditions.
To connect polymeric insulated
cable to equipment and for
the outdoor terminating on to
overhead lines or bus bars.
Design
Outdoor termination
comprising:
1. Cable lug (not included in
the standard kit).
2. Water sealing silicone sleeve.
3. Silicone housing with sheds
and integrated conductive
silicone rubber insert
providing stress relief for the
cable.
4. Water sealing mastic.
5. Earthing clamp.
6. Earthing lug (not included in
the standard kit).
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Termination
type
Voltage
Um
(kV)
Conductor sizes
(mm2)
min. max.
AFN 10
AFN 20
AFN 30
AFN 36
12
24
36
42
25
35
50
150
1000
1000
800
800
5
1
2
3
4
6
11. 11
For use with copper
wire screened cables.
No earthing
device is
necessary.
For use with
copper tape
screened cables.
Order: -/MT.
For use with
three-core cables.
Please contact our
representative.
For use with other
cable types.
Please contact our
representative.
Can be supplied with
all common types of
cable lugs.
No heating or flame
is required.
Example:
A set of 3 outdoor terminations
for a 24 kV - 240 mm2 stranded
aluminium cable with copper wire
screen without cable lugs.
The diameter over core insulation
is 30.4 mm.
Ordering instructions
Select the part number
corresponding to both the
system voltage and the cable
dimensions in mm.
Kit contents
A kit always comprises
3 termination housings, water
sealing sleeve, the installation
instructions, special lubricant,
wiper, earthing clamp, water
sealing mastic, adhesive tape,
field control mastic, ...
Cable lugs and earthing lugs are
not included in the standard kit,
but can be ordered separately.
Voltage
Um
(kV)
Conductor
sizes
(mm2)
Diameter over
core insulation
(mm)
Number
of sheds
L
(mm)
(max)
Dia. D
(mm)
Creepage
distance
(mm)
Ordering
part number
min max min max
12
25
120
300
630
95
240
500
800
12.7
19.0
27.0
34.0
39.0
46.0
21.0
28.5
37.0
46.0
50.0
58.0
3
3
3
4
7
7
210
210
210
240
405
405
90
96
105
118
127
127
369
365
360
462
755
755
3 x AFN 10-1
3 x AFN 10-2
3 x AFN 10-3
3 x AFN 20-4
3 x AFN 36-5
3 x AFN 36-6
1000
1200
24
35
95
300
400
630
1000
70
240
500
630
800
1200
18.0
22.5
31.0
34.0
39.0
46.0
23.5
33.0
41.0
46.0
50.0
58.0
4
4
4
4
7
7
240
240
240
240
405
405
100
112
118
118
127
127
480
499
462
462
755
755
3 x AFN 20-1
3 x AFN 20-2
3 x AFN 20-3
3 x AFN 20-4
3 x AFN 36-5
3 x AFN 36-6
36
50
95
240
400
630
70
240
400
630
1000
23.5
27.0
32.0
39.0
46.0
29.0
38.0
43.0
50.0
58.0
6
6
6
7
7
300
300
300
405
405
115
115
127
127
127
695
694
718
755
755
3 x AFN 30-1
3 x AFN 30-2
3 x AFN 30-3
3 x AFN 36-5
3 x AFN 36-6
42
70
150
400
630
120
300
630
1000
28.0
31.5
39.0
46.0
32.0
41.0
50.0
58.0
7
7
7
7
405
405
405
405
127
127
127
127
755
755
755
755
3 x AFN 36-3
3 x AFN 36-4
3 x AFN 36-5
3 x AFN 36-6
For use in heavy polluted areas (terminations with an increased creepage length)
42
70
150
400
630
120
300
630
1000
28.0
31.5
39.0
46.0
32.0
41.0
50.0
58.0
11
11
11
11
535
535
535
535
127
127
127
127
1079
1079
1079
1079
3 x AFNP 36-3
3 x AFNP 36-4
3 x AFNP 36-5
3 x AFNP 36-6
Order a 3 x AFN 20-2
termination kit.
12. 12
11/2012
SREI
HEAT-SHRINKABLE
SINGLE CORE XLPE
INDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
Up to 36 kV
Application
A set of three heat-shrinkable
terminations for polymeric
cables, widely used by power
utilities and in industrial
applications.
For use indoor in controlled
environmental conditions.
Design
1. Cable lug (supplied on
request).
2. Water sealing mastic.
3. Anti-tracking heat-shrinkable
tube.
4. Stress control heat-shrinkable
tube.
5. Stress control mastic.
6. Anti-tracking sheds (when
required).
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Termination
type
Voltage class
(Um)
12 kV (17 &) 24 kV 36 kV
SREI
Cable cross section
(mm²)
35-95
120-240
240-500
400-630
35-70
95-185
240-400
400-630
50-95
120-240
240-500
400-630
Ordering instructions
Select the part number and
add both system voltage and
conductor size range.
Example part number:
SREI 12/120-240
For use with other sizes
and cable types.
Please contact our
representative.
3
1
2
2
4
5
3
1
2
2
4
5
6
13. 13
11/2012
SREF
HEAT-SHRINKABLE
SINGLE CORE XLPE
OUTDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
Up to 36 kV
Application
A set of three heat-shrinkable
terminations for polymeric
cables, widely used by power
utilities and in industrial
applications.
For use outdoors and exposed
to prolonged sunshine and
other weather conditions.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Ordering instructions
Select the part number and
add both system voltage and
conductor size range.
Example part number:
SREF 12/120-240
Design
1. Cable lug (supplied on
request).
2. Water sealing mastic.
3. Anti-tracking heat-shrinkable
tube.
4. Stress control heat-shrinkable
tube.
5. Stress control mastic.
6. Anti-tracking sheds.
Termination
type
Voltage class
(Um)
12 kV (17 &) 24 kV 36 kV
SREF
Cable cross section
(mm²)
35-95
120-240
240-500
400-630
35-70
95-185
240-400
400-630
50-95
120-240
240-500
400-630
For use with other sizes
and cable types.
Please contact our
representative.
3
2
1
2
4
5
6
14. 14
11/2012
SRDI
HEAT-SHRINKABLE
THREE CORE XLPE
INDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
Up to 36 kV
Application
Heat-shrinkable terminations
for three core polymeric cables,
widely used by power utilities
and in industrial applications.
For use indoor in controlled
environmental conditions.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Ordering instructions
Select the part number and
add both system voltage and
conductor size range.
Example part number:
SRDI 12/120-240
7
3
1
5
6
2
4
2
Design
1. Cable lug (supplied on
request).
2. Water sealing mastic.
3. Anti-tracking heat-shrinkable
tube.
4. Anti-tracking sheds (when
required).
5. Stress control heat-shrinkable
tube.
6. Stress control mastic.
7. Break-out.
Termination
type
Voltage class
(Um)
12 kV (17 &) 24 kV 36 kV
SRDI
Cable cross section
(mm²)
35-95
120-240
240-500
25-70
95-185
240-400
50-120
150-240
240-400
For use with other sizes
and cable types.
Please contact our
representative.
15. 15
11/2012
SRDF
HEAT-SHRINKABLE
THREE CORE XLPE
OUTDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
Up to 36 kV
Application
Heat-shrinkable terminations
for three core polymeric cables,
widely used by power utilities
and in industrial applications.
For use outdoors and exposed
to prolonged sunshine and
other weather conditions.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Ordering instructions
Select the part number and
add both system voltage and
conductor size range.
Example part number:
SRDF 12/120-240
Design
1. Cable lug (supplied on
request).
2. Water sealing mastic.
3. Anti-tracking heat-shrinkable
tube.
4. Anti-tracking sheds.
5. Stress control heat-shrinkable
tube.
6. Stress control mastic.
7. Break-out.
3
1
7
4
2
5
6
2
Termination
type
Voltage class
(Um)
12 kV (17 &) 24 kV 36 kV
SRDF
Cable cross section
(mm²)
35-95
120-240
240-500
25-70
95-185
240-400
50-120
150-240
240-400
For use with other sizes
and cable types.
Please contact our
representative.
16. 16
11/2012
SPDI
HEAT-SHRINKABLE
THREE CORE PILC/PICAS
INDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
Up to 12 kV
Application
Heat-shrinkable terminations
for three core PILC/PICAS
cables, used by power utilities
and in industrial applications.
For use indoor in controlled
environmental conditions.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Termination type Voltage class (Um) Cable cross section (mm²)
SPDI 12/16-25
SPDI 12/35-70
SPDI 12/95-150
SPDI 12/185-500
12 kV
16-25
35-70
95-150
185-500
Ordering instructions
Select the part number and
add both system voltage and
conductor size range.
Example part number:
SPDI 12/95-150
Design
1. Cable lug (supplied on
request).
2. Water sealing mastic.
3. Anti-tracking heat-shrinkable
tube.
4. Anti-tracking sheds (when
required).
5. Stress control heat-shrinkable
tube.
6. Stress control mastic.
7. Break-out.
8. Barrier tube.
7
3
8
1
5
6
2
4
2
For use with other sizes
and cable types.
Please contact our
representative.
17. 17
11/2012
SPDF
HEAT-SHRINKABLE
THREE CORE PILC/PICAS
OUTDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
Up to 12 kV
Application
Heat-shrinkable terminations
for three core PILC/PICAS
cables, widely used by power
utilities and in industrial
applications.
For use outdoors and exposed
to prolonged sunshine and
other weather conditions.
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Ordering instructions
Select the part number and
add both system voltage and
conductor size range.
Example part number:
SPDF 12/95-150
Design
1. Cable lug (supplied on
request).
2. Water sealing mastic.
3. Anti-tracking heat-shrinkable
tube.
4. Anti-tracking sheds.
5. Stress control heat-shrinkable
tube.
6. Stress control mastic.
7. Break-out.
8. Oil barrier tube.
9. Anti-tracking tri-shed.
3
1
7
4
9
8
2
5
6
2
Termination type Voltage class (Um) Cable cross section (mm²)
SPDF 12/16-25
SPDF 12/35-70
SPDF 12/95-150
SPDF 12/185-500
12 kV
16-25
35-70
95-150
185-500
For use with other sizes
and cable types.
Please contact our
representative.
18. 18
11/2012
Up to 17.5 kV
BIL 95 kV
Bushing
boot
type
Voltage
Um
(kV)
Conductor sizes (mm2) Diameter D over termination (mm)
min. max. min. max.
15TS-NSS 17.5 max. 35 630 20 50
Clearances
This is an unscreened boot and
therefore not safe to touch
when energised. When used
in a metal enclosed cable box,
these minimum clearances
must be respected.
15TS-NSS
UNIVERSAL
BUSHING BOOT
Application
This universal bushing boot
is manufactured from non-
tracking EPDM rubber and is
designed to mate with all types
of cold or heat-shrinkable
terminations (without sheds).
The bushing part fits interface
diameters between 40 and 60
mm. The system is separable
and allows easy removal for
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
Kit contents
The 3 x 15TS-NSS kit comprises
3 universal bushing boots,
silicone grease and installation
instructions.
In mm
testing. This boot is suitable for all
angles between 90° and 180°.
19. 19
11/2012
FB1
FLEXIBLE
BUSHING BOOT
Application
Bushing insulating elastomeric
boots are used to insulate the
bushing in switchgear and
transformer cable termination
boxes up to 17.5 kV especially
where the clearances between
phase to phase and phase to
earth is less than the normal air
clearance. These boots provide
protection against flash over in
the event of high humidity and
surge impulse. The boots are made
from highly insulating flexible
and weather resistant elastomeric
material.
FB1 insulating boots are quick
and easy to install. The boots can
be removed easily for convenient
access to the bushing connection
for testing purposes. After testing
the boot can be reinstalled easily
without using additional material
or tooling.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
Clearances
This is an unscreened boot and
therefore not safe to touch
when energised.
Advantages
High performance flexible
insulation material with
excellent tracking and erosion
resistance.
Quick and easy to remove and
reinstall.
Unlimited shelf life.
Termination can be energised
immediately after installation.
Technical specification
Basic impulse level: 95 kV
Bushing diameter: 30 - 45 mm
Cable sizes: 35 - 400 mm2
Kit contents
The FB1 kit comprises of 3
flexible bushing boots and 3
tubes of grease.
Bushing
boot
type
Voltage
Um
(kV)
Description Diameter D over termination (mm)
min. max.
FB1 17.5 max. Flexible boot 35 400
20. 20
11/2012
Up to 17.5 kV
Bushing
boot
type
Voltage
Um
(kV)
Description
Conductor sizes (mm2)
min. max.
RAB 1
RAB 2
RABS1
RABS2
SB 1
SB 2
17.5 max.
17.5 max.
17.5 max.
17.5 max.
17.5 max.
17.5 max.
right angle
right angle
right angle short
right angle short
straight
straight
16
120
16
120
16
120
95
300
95
300
95
300
Clearances
This is an unscreened boot and
therefore not safe to touch
when energised.
RAB/SB
HEAT-SHRINKABLE
BUSHING BOOT
Application
Heat-shrinkable bushing
boots are used to increase the
creepage distance between
the live metal and surrounding
metal work and neighbouring
phases.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
Kit contents
The RAB/SB kit comprises
3 heat-shrinkable bushing
boots and mastic.
21. 21
11/2012
SE
XLPE SOLDERLESS
EARTH CONNECTION
INDOOR
Application
Required to effectively earth
the copper tape screen
of polymeric (XLPE & EPR)
insulated cables without
soldering.
Supplied in sets of three.
Part number
3-core kit
Voltage class
(Um)
6.6 kV 12 kV (17 &) 24 kV 36 kV
Diameter over
screen (mm)
SE1
SE2
SE3
SE4
SE5
Cable cross
section
(mm²)
16-50
70-150
185-300
400-630
800-1000
16-50
70-150
185-240
300-630
800-1000
-
25-70
95-150
185-500
630-1000
-
25-35
50-70
95-300
400-1000
12-18
19-24
25-30
31-44
41-65
CK
PILC SOLDERLESS
EARTH CONNECTION
OUTDOOR
Application
For use with HSGK range of
gland kits when installing lead
sheathed cables (PILC).
Allows the earthing of the
lead sheath without need for
plumbing.
Indoor kit
Part number
Outdoor kit
Part number
Cable cross
section
Diameter over lead
sheath (mm)
CK1
CK2
CK3
CK4
CK1-O
CK2-O
CK3-O
CK4-O
16-95 mm²
120-185 mm²
240-300 mm²
400-500 mm²
28-39
40-50
51-60
61-80
22. 22
11/2012
HSGK
CABLE GLAND KIT
Application
Made to comply with stud
spacings to BS 2562.
For indoor and outdoor use on
switchgear or transformer cable
boxes.
They provide an effective
moisture seal around the cable
sheath and earth armour wires.
Part number Cable cross section
HSGK1
HSGK2
HSGK3 (pack of 3)
3-core cables with an under armour diameter of up to 63 mm
3-core cables with an under armour diameter of up to 94 mm
1-core cables with an under armour diameter of up to 63 mm
Kit contents
The kit includes metal gland
body, heat-shrinkable sleeve,
armour clamps, copper braid
and mastic tape.
23. 23
11/2012
XCK-HSS
MULTI CORE HEAT-SHRINK
BREAKOUT KIT
Application
For environmental protection
of the exposed cores and
crutch of 3 and 4 core
polymeric insulated cables
when terminated with Nexans
screened separable connectors.
Design
The kit consists of a heat
shrink breakout, core tubes,
sealing mastic and installation
instructions.
Ordering instructions
The breakout kits are made up
specific to cable requirements.
When ordering please give
diameter of core insulation,
overall diameter of cable and
number of cores (for 4 core
cables please state whether all
core insulations are the same
diameter). If these are not
known please give kV rating,
core size in sqmm, number of
cores and whether armoured/
unarmoured. For relevant
solderless earth kits for copper
tape screened cables please
refer to the appropriate section
in the catalogue.
Please note these are not
termination kits and relevant
cable terminations are to be
used in conjunction with these
kits.
24. 24
11/2012
Enquiry sheet
Please fax to:
01977 66 99 77
NPA Ltd.
Your company details:
Company: ______________________________________________________
Town: _________________________________________________________
Tel.: ___________________________________________________________
Fax: ___________________________________________________________
Contact: _______________________________________________________
General
System voltage _________kV
Load current _________Amp
Fault level _________kA
_________sec
No. of cores: _________
Conductor material: Al Cu
Armour: None SWA STA
Installation area:
Indoor Outdoor
Product type
Termination
Tail length___________mm
Joint
Separable connector
Technology
Heat shrinkable
Cold shrinkable
Slip-on
15TS
Euromold
ResinCable type
XLPE
EPR
Cu tape screen
Cu wire screen
PICAS
PILC
Screened
Belted
Cable cross section______mm²
Core insulation diameter______mm
Accessories
Earthing kit
Bushing boots
Cable lugs
Ferrules
Gland kit
Heat-shrinkable
25. Additional catalogue information on power cable accessories
is available by contacting us at the address below:
Nexans Power Accessories Ltd
Unit 2, Aire & Calder Industrial Park, Lock Lane, Castleford, West Yorkshire WF10 2JA, United Kingdom
Tel.: +44 (0)1977 66 99 66 • Fax: +44 (0)1977 66 99 77 • sales@nexansdirect.com
Catalogue also available on CD-ROM
Distributed by:
11/2012