This document provides specifications for outdoor cable termination kits for connecting polymeric insulated cable to equipment outdoors. It lists the available voltage ratings and conductor size ranges for the AFN slip-on termination kits. Each kit contains 3 silicone termination housings, sealing components, and installation instructions to connect cable in exposed outdoor environments. The document provides ordering information and part numbers for selecting the appropriate kit based on voltage and cable dimensions.
Ellis Patents Alpha cable cleats are available for trefoil and single cable applications where moderate levels of short circuit withstand are required. Ellis Patents Alpha cable cleats unique design allows rapid installation offering significant man hours and labour saving for cable contractors.
Ellis Patents Alpha cable cleats are compliant with London Underground Engineering Standard 1-085 - Product Register No.360.
Alpha cable cleats are manufactured from extruded aluminium (6000 series) to BS EN 755, the cleat is lighter and tougher than the cast aluminium cable cleat product it is designed to replace - cleats are supplied with zinc plated closing fasteners.
Prysmian 2 Bolt Nylon Cable Cleats - BICON Cleats Features
Cable cleats for use with cables from 50 to 94 mm in diameter
BICON cleats available in 7 sizes
Sunlight (UV) and weather resistant cable cleats
Two-piece, two fixing cable cleat design.
Operating temperature -20°C to +90°C
Cable cleats can be double stacked on common fixing
Los transgresores son la contaminación, violación o invasión al uso del espacio de los humanos. Estos generan respuestas; defender el territorio, aislarse, confabulación lingüística o retirarse.
En la proxémica podemos dar cuenta de las distancias, territorios e indicadores.
A continuación se explican algunos ejemplos, sobre transgresiones ocurridas.
Ellis Patents Alpha cable cleats are available for trefoil and single cable applications where moderate levels of short circuit withstand are required. Ellis Patents Alpha cable cleats unique design allows rapid installation offering significant man hours and labour saving for cable contractors.
Ellis Patents Alpha cable cleats are compliant with London Underground Engineering Standard 1-085 - Product Register No.360.
Alpha cable cleats are manufactured from extruded aluminium (6000 series) to BS EN 755, the cleat is lighter and tougher than the cast aluminium cable cleat product it is designed to replace - cleats are supplied with zinc plated closing fasteners.
Prysmian 2 Bolt Nylon Cable Cleats - BICON Cleats Features
Cable cleats for use with cables from 50 to 94 mm in diameter
BICON cleats available in 7 sizes
Sunlight (UV) and weather resistant cable cleats
Two-piece, two fixing cable cleat design.
Operating temperature -20°C to +90°C
Cable cleats can be double stacked on common fixing
Los transgresores son la contaminación, violación o invasión al uso del espacio de los humanos. Estos generan respuestas; defender el territorio, aislarse, confabulación lingüística o retirarse.
En la proxémica podemos dar cuenta de las distancias, territorios e indicadores.
A continuación se explican algunos ejemplos, sobre transgresiones ocurridas.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
400 Series Interface C Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Euromold elbow connectors, Euromold tee connectors, Euromold bushings (oil insulated) and Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series, 400TB 440TB Features :
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
T&D UK with the support of Nexans provide installation training and certification for experienced high voltage cable jointers up to 33kV.
Euromold Connectors 400 Series Interface Type C Bushing - 630Amp
* Connector Type : M16 Bolted Copper Insert
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 630amps
* Specification : CENELEC EN50180 & EN50181
Euromold 430TB Elbow Connectors are used with 400 Series Interface C Bushing.
Nexans Euromold tee connectors are designed for terminating high voltage XLPE power cables into compact switchgear to make optimum use of limited installation space.
Nexans, the worldwide leader in the cable industry, has extended its well-proven range of compact high voltage (HV) connectors with two new tee-shaped connectors designed specifically for use with compact switchgear and transformers now being specified for wind turbine applications. The Nexans Euromold M430TB connector is for use with higher voltages (up to 33-36kV) and the M434TB connector is for higher currents (up to 1,250 A).
Trend Towards Compact Switchgear for Wind Turbines
The growing trend towards using ever more compact high voltage switchgear in wind turbines has resulted in smaller cable boxes, limiting the space available for connectors. Nexans has responded to this challenge by developing its new asymmetric tee-shape connectors to create a compact connection solution. This now enables two cables to be connected in the same space required for one cable using a traditional non-compact connector. As well as being ideal for all applications where space is a limiting factor, the Nexans compact connectors also enable users to increase the capacity of an existing installation.
EPDM Jacket: A Key Design Feature for Safety and Reliability
The Nexans Euromold M430TB and the M434TB are separable tee-shape bolted connectors designed to connect high voltage polymer-insulated cable to wind turbine equipment such as switchgear and transformers- they can also be used for cable to cable connections with the appropriate mating parts. A key design feature is the thick (3 mm) EPDM (Ethylene Propylene Diene Monomer) rubber conductive insulation jacket that provides a total safe to touch screen for personnel safety, this is both more reliable and longer lasting than the painted silicone rubber insulation used in many connectors.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Similar to Nexans AFNP36 33kV Slip-On Outdoor High Voltage Cable Terminations (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...
Nexans AFNP36 33kV Slip-On Outdoor High Voltage Cable Terminations
1. 10
04/2012
AFN
SLIP-ON
OUTDOOR TERMINATION
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
20.8/36 (42) kV
Up to 42 kVApplication
A kit of 3 terminations for
use outdoors and exposed to
prolonged sunshine and other
weather conditions.
To connect polymeric insulated
cable to equipment and for
the outdoor terminating on to
overhead lines or bus bars.
Design
Outdoor termination
comprising:
1. Cable lug (not included in
the standard kit).
2. Water sealing silicone sleeve.
3. Silicone housing with sheds
and integrated conductive
silicone rubber insert
providing stress relief for the
cable.
4. Water sealing mastic.
5. Earthing clamp.
6. Earthing lug (not included in
the standard kit).
Specifications and
standards
Meets the requirements of
CENELEC HD 629.1 and
IEC 60502-4.
Termination
type
Voltage
Um
(kV)
Conductor sizes
(mm2)
min max
AFN 10
AFN 20
AFN 30
AFN 36
12
24
36
42
25
35
50
150
1200
1200
1000
1000
5
1
2
3
4
6
2. 11
Example:
A set of 3 outdoor terminations
for a 24 kV - 240 mm2 stranded
aluminium cable with copper wire
screen without cable lugs.
The diameter over core insulation
is 30.4 mm.
Ordering instructions
Select the part number
corresponding to both the
system voltage and the cable
dimensions in mm.
Kit contents
A kit always comprises
3 termination housings, water
sealing sleeve, the installation
instructions, special lubricant,
wiper, earthing clamp, water
sealing mastic, adhesive tape,
field control mastic, ...
For use with copper
wire screened cables.
No earthing
device is
necessary.
For use with
copper tape
screened cables.
Order: -/MT.
For use with
three-core cables.
Please contact our
representative.
For use with other
cable types.
Please contact our
representative.
Can be supplied with
all common types of
cable lugs.
No heating or flame
is required.
Cable lugs and earthing lugs are
not included in the standard kit,
but can be ordered separately.
Voltage
Um
(kV)
Conductor
sizes
(mm2)
Diameter over
core insulation
(mm)
Number
of sheds
L
(mm)
(max)
Dia. D
(mm)
Creepage
distance
(mm)
Ordering
part number
min max min max
12
25
120
300
630
95
240
500
800
12.7
19.0
27.0
34.0
39.0
46.0
21.0
28.5
37.0
46.0
50.0
58.0
3
3
3
4
7
7
210
210
210
240
405
405
90
96
105
118
127
127
369
365
360
462
755
755
3 x AFN 10-1
3 x AFN 10-2
3 x AFN 10-3
3 x AFN 20-4
3 x AFN 36-5
3 x AFN 36-6
1000
1200
24
35
95
300
400
630
1000
70
240
500
630
800
1200
18.0
22.5
31.0
34.0
39.0
46.0
23.5
33.0
41.0
46.0
50.0
58.0
4
4
4
4
7
7
240
240
240
240
405
405
100
112
118
118
127
127
480
499
462
462
755
755
3 x AFN 20-1
3 x AFN 20-2
3 x AFN 20-3
3 x AFN 20-4
3 x AFN 36-5
3 x AFN 36-6
36
50
95
240
400
630
70
240
400
630
1000
23.5
27.0
32.0
39.0
46.0
29.0
38.0
43.0
50.0
58.0
6
6
6
7
7
300
300
300
405
405
115
115
127
127
127
695
694
718
755
755
3 x AFN 30-1
3 x AFN 30-2
3 x AFN 30-3
3 x AFN 36-5
3 x AFN 36-6
42
70
150
400
630
120
300
630
1000
28.0
31.5
39.0
46.0
32.0
41.0
50.0
58.0
7
7
7
7
405
405
405
405
127
127
127
127
755
755
755
755
3 x AFN 36-3
3 x AFN 36-4
3 x AFN 36-5
3 x AFN 36-6
For use in heavy polluted areas (terminations with an increased creepage length)
42
70
150
400
630
120
300
630
1000
28.0
31.5
39.0
46.0
32.0
41.0
50.0
58.0
11
11
11
11
535
535
535
535
127
127
127
127
1079
1079
1079
1079
3 x AFNP 36-3
3 x AFNP 36-4
3 x AFNP 36-5
3 x AFNP 36-6
Order a 3 x AFN 20-2
termination kit.