The high shear mill is a device used to reduce particle sizes through attrition force. It consists of a stationary disc and a rotating disc with a gap that particles are fed into. As the rotating disc spins at high speeds, the particles are crushed and grind against each other and the screens until they are small enough to pass through. High shear mills can be used across industries to mix, blend, and process liquids, gases, and powders. They provide efficient mixing through short processing times and uniform temperatures without hot spots. However, they also have high operating costs and produce dust during particle size reduction.
This document provides standard operating procedures for manufacturing aerated autoclaved concrete blocks (AAC blocks). It describes the raw materials used, including fly ash, cement, lime, gypsum, and water. It outlines the process which involves preparing raw material mixtures, pouring the mixtures into molds, cutting the blocks, curing them in autoclaves, and testing the final products. Safety procedures are also described, particularly for handling the flammable raw material aluminum powder.
Breathing air systems manufactured by Trident pneumatic operates on the principle of pressure swing adsorption delivering a dew point of +2’C. These systems are known for their guaranteed dew point performance and design simplicity.
Rapid coat is 43 year old ISO 9001:2008 certified and Qualicoat approved manufacturer, exporter & supplier of hybrid Epoxy Polyester Powder Coatings & Plastic Powder Coatings. Rapid Coat is one of only a few companies in the world that produce both thermosetting and thermoplastic powder coatings. These powders are designed for multiple applications and are used across many different industries – Automotive, Architectural, Appliances, Agriculture & Construction Equipment, Furniture, Fire Extinguisher, Electrical, Functional and many more. Visit:- http://rapidcoat.com
The document is an industrial training presentation on Thermax heater operation and maintenance at Dhunseri Petrochem Limited in Haldia, West Bengal. It provides information about the company, which manufactures PET resin using German technology. It describes the raw materials and two-step process used. It then details some key equipment used - the bucket elevator, hot water pump, plate heat exchanger, Cyclomax, and bag filter. Finally, it discusses maintenance of the Thermax heater and its components to ensure efficiency and prevent breakdowns.
Pneumatic conveyors draw material from containers to the required location in the selected quantities and within the desired time. They convey materials in perfect hygienic conditions, respecting both the environment and operator health. Pneumatic conveyors come in a wide range of models with power ratings from 0.37 to 22 kW and flow rates from 100 to 3,000 kg/h. They can be customized and are a guaranteed system for industries like chemicals, pharmaceuticals, and food where mixtures must maintain their integrity during conveying.
This document summarizes a project by Star Feeds Ltd. in Nepal to address odor issues at their poultry feed production plant. It introduces the company and production process, identifies MBM and the cooling section as sources of odor. It then describes testing BiOWiSH odor spray at two MBM sites, finding it successfully removed odor for over two days.
The high shear mill is a device used to reduce particle sizes through attrition force. It consists of a stationary disc and a rotating disc with a gap that particles are fed into. As the rotating disc spins at high speeds, the particles are crushed and grind against each other and the screens until they are small enough to pass through. High shear mills can be used across industries to mix, blend, and process liquids, gases, and powders. They provide efficient mixing through short processing times and uniform temperatures without hot spots. However, they also have high operating costs and produce dust during particle size reduction.
This document provides standard operating procedures for manufacturing aerated autoclaved concrete blocks (AAC blocks). It describes the raw materials used, including fly ash, cement, lime, gypsum, and water. It outlines the process which involves preparing raw material mixtures, pouring the mixtures into molds, cutting the blocks, curing them in autoclaves, and testing the final products. Safety procedures are also described, particularly for handling the flammable raw material aluminum powder.
Breathing air systems manufactured by Trident pneumatic operates on the principle of pressure swing adsorption delivering a dew point of +2’C. These systems are known for their guaranteed dew point performance and design simplicity.
Rapid coat is 43 year old ISO 9001:2008 certified and Qualicoat approved manufacturer, exporter & supplier of hybrid Epoxy Polyester Powder Coatings & Plastic Powder Coatings. Rapid Coat is one of only a few companies in the world that produce both thermosetting and thermoplastic powder coatings. These powders are designed for multiple applications and are used across many different industries – Automotive, Architectural, Appliances, Agriculture & Construction Equipment, Furniture, Fire Extinguisher, Electrical, Functional and many more. Visit:- http://rapidcoat.com
The document is an industrial training presentation on Thermax heater operation and maintenance at Dhunseri Petrochem Limited in Haldia, West Bengal. It provides information about the company, which manufactures PET resin using German technology. It describes the raw materials and two-step process used. It then details some key equipment used - the bucket elevator, hot water pump, plate heat exchanger, Cyclomax, and bag filter. Finally, it discusses maintenance of the Thermax heater and its components to ensure efficiency and prevent breakdowns.
Pneumatic conveyors draw material from containers to the required location in the selected quantities and within the desired time. They convey materials in perfect hygienic conditions, respecting both the environment and operator health. Pneumatic conveyors come in a wide range of models with power ratings from 0.37 to 22 kW and flow rates from 100 to 3,000 kg/h. They can be customized and are a guaranteed system for industries like chemicals, pharmaceuticals, and food where mixtures must maintain their integrity during conveying.
This document summarizes a project by Star Feeds Ltd. in Nepal to address odor issues at their poultry feed production plant. It introduces the company and production process, identifies MBM and the cooling section as sources of odor. It then describes testing BiOWiSH odor spray at two MBM sites, finding it successfully removed odor for over two days.
Höganäs is a metal powder company founded in 1797 in Sweden. It has since expanded globally and diversified its product portfolio. It began as a coal mining operation and later added production of refractory bricks, pottery, and sponge iron. In the 20th century it opened its first plants for producing metal powders through atomization. Today Höganäs produces metal powders for powder metallurgy components, soft magnetic components, and consumables used in various industries. It has a global network of production facilities, sales and technical centers to serve customers worldwide.
Haycarb PLC is a leading manufacturer of activated carbon from coconut shells with over 35 years of experience. The document summarizes Lakshitha M.A.R's 3-month industrial training at Haycarb, including an introduction to the company's history and production process. As part of the training, Lakshitha conducted various projects in the maintenance department like preparing a new layout to improve efficiency, surveying dust plants to assess maintenance needs, creating an air flow meter to detect leaks, and standardizing roller parts to simplify inventory. The training provided hands-on experience in maintaining equipment and identifying solutions to issues.
Twin screw extruder for sale for more consistency & increased productivityCFAMTechnologies
Twin screw extruder for sale for more consistency, flexibility and productivity. The flexibility of twin screw extruder machines allows the operation to be designed particularly for the formulation being processed. For more details visit the link, https://www.evernote.com/shard/s657/sh/c9a07a2c-a086-481f-9354-c9e4bb13fe9d/781d819e3d8a136eda64e979178c66bb
Cheema Boilers Limited is an Indian engineering company established in 1999 that builds high-capacity boilers and provides integrated power plant solutions. The company uses various machines like bending, rolling, cutting, and welding machines to manufacture boiler components from plates and pipes. Boilers are closed pressure vessels that convert water to steam using heat sources. They are classified by the position of tubes (fire tube or water tube) and used across industries for power generation and processing. Key boiler components and safety equipment help ensure safe operation.
The decision of whether to use a rotary dryer or kiln to reduce moisture in the feedstock often comes up during the design stages of a rotary kiln. This presentation examines the costs and benefits associated with each option.
ADITYA rotary evaporators form the ideal basis for efficient evaporation in your laboratory. They are suitable for standard distillation, complex distilling processes as well as automatic distillation. Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the evaporators. This is reflected in various unique product advantages. Among others, all evaporators are equipped with a separate ON/OFF switch for the heating function. It is also provided with an easy lift, a simple touch operation to lift the flask. With the rotary evaporators, you can as well compose your individual modular concept, consisting of rotary evaporator, vacuum controller, vacuum pump and
chiller. Distil your solvents reliably with the Aditya evaporator. Aditya offers an intelligent solution to process your solvent evaporation easy and safely. Our vacuum distillation system makes evaporating easy for you and allows you to concentrate on your research.
This document discusses an international partnership between Solutions Plus Inc. and Inventa Cleantec Pvt Ltd to provide paper mill cleaning products and services. It outlines Solutions Plus' focus on keeping paper machines running clean to ensure customers receive high quality paper. The document then provides information on global paper industry trends, the major paper industry categories Solutions Plus covers, their applications and products, case studies of customer results, and a list of customers.
Sonix IV Industrial power GT-Series Ultrasonic Cleaning SystemsSonix IV Corporation
The Sonix4 ultrasonic cleaning systems provide the best cleaning performance in the industry for critical cleaning applications. Their GT industrial series features a range of tank sizes from 3 to 90 gallons for cleaning parts and assemblies. The GT models utilize cavitation technology and precision controls to deliver fast, effective cleaning suitable for production, institutional, and job shop environments.
Verderflex Peristaltic Hose Pumps Industrial ApplicationsVerder, Inc.
Verderflex® peristaltic hose pumps and tube pumps are the ideal solution for pumping liquids and dosing chemicals. Ranging from smaller Original Equipment Manufacture (OEM) pumps to the world’s largest hose pumps used in very heavy industrial applications.
The document discusses various powder compaction and densification methods. It describes uniaxial pressing which uses mechanical, hydraulic, or electric presses to consolidate powder materials. It also describes isostatic pressing methods like cold isostatic pressing which uses high-pressure gas or liquid to densify powders within flexible bags or rigid containers. The document provides details on equipment and specifications for different pressing technologies.
Fabhind is an Indian manufacturing company that establishes turnkey construction projects globally. Its mission is to become a leading manufacturer through best efforts and client development. The company was established in 1991 and has since delivered over 100 recycling plants and 50 asphalt plants across India and other countries. It aims to provide comprehensive waste and road construction solutions through advanced technology development.
Presented by Nanophase VP of Operations H. Glenn Judd at the American Manufacturing Strategies Summit in November 2015, the slides review how Nanophase Technologies has used lean manufacturing, operational excellence and continuous improvement to streamline their processes. Learn more: http://nanophase.com/technology/
Weiber convection ovens are designed for high-forced volume thermal convection applications. The convection bench ovens are economical and easily moved to various locations.
This document introduces GreenSpense, a new propellant-free continuous dispensing technology. GreenSpense aims to eliminate the drawbacks of traditional pressurized dispensing methods such as high costs, safety issues, and limited material options. It claims to be more eco-friendly by reducing greenhouse gas emissions and allowing for less preservatives. GreenSpense also aims to unleash packaging design creativity by enabling any material and shape. It is presented as reducing production and transportation costs. The technology has received recognition from cleantech competitions and the document promotes joining the "propellant-free revolution."
This presentation looks at the choice between a rotary drum agglomerator and a disc pelletizer, when looking for an effective agglomeration solution. The advantages of each piece of equipment are discussed for a variety of considerations.
Stop wasting time waiting for the mixerKathryn Perry
Do you find that time is lost waiting for the mixer to fill? And then you waste time waiting for it to empty? What could you do with that wasted time? See how an IBC system can save you all that wasted time.
Competitiveness Through Reduced Production CostsDave Rees
The document discusses optimization opportunities for valves, motors, and steering units that can reduce total cycle times by 25-50% for motors and steering units and 35-70% for valves. It states that higher product quality and reduced machining time through their unique tool solutions can lower production costs and significantly increase productivity.
Your Final Destination for COMPRESSED AIR SOLUTIONS..
world class compressors
drying units
filtration
spares and service
Turnkey Pipeline for air and gas
Rotary kilns are a significant investment in any processing operation, requiring precise engineering around process and product goals. Finding a rotary kiln manufacturer that can design and fabricate a custom, quality solution can be difficult. This presentation provides a guide on some of the factors to consider when choosing a rotary kiln manufacturer for your processing application.
AT Precision, a division of Active Technologies designs and manufactures Low Pressure Injection Moulding solutions from equipment, automation and material supply.
Höganäs is a metal powder company founded in 1797 in Sweden. It has since expanded globally and diversified its product portfolio. It began as a coal mining operation and later added production of refractory bricks, pottery, and sponge iron. In the 20th century it opened its first plants for producing metal powders through atomization. Today Höganäs produces metal powders for powder metallurgy components, soft magnetic components, and consumables used in various industries. It has a global network of production facilities, sales and technical centers to serve customers worldwide.
Haycarb PLC is a leading manufacturer of activated carbon from coconut shells with over 35 years of experience. The document summarizes Lakshitha M.A.R's 3-month industrial training at Haycarb, including an introduction to the company's history and production process. As part of the training, Lakshitha conducted various projects in the maintenance department like preparing a new layout to improve efficiency, surveying dust plants to assess maintenance needs, creating an air flow meter to detect leaks, and standardizing roller parts to simplify inventory. The training provided hands-on experience in maintaining equipment and identifying solutions to issues.
Twin screw extruder for sale for more consistency & increased productivityCFAMTechnologies
Twin screw extruder for sale for more consistency, flexibility and productivity. The flexibility of twin screw extruder machines allows the operation to be designed particularly for the formulation being processed. For more details visit the link, https://www.evernote.com/shard/s657/sh/c9a07a2c-a086-481f-9354-c9e4bb13fe9d/781d819e3d8a136eda64e979178c66bb
Cheema Boilers Limited is an Indian engineering company established in 1999 that builds high-capacity boilers and provides integrated power plant solutions. The company uses various machines like bending, rolling, cutting, and welding machines to manufacture boiler components from plates and pipes. Boilers are closed pressure vessels that convert water to steam using heat sources. They are classified by the position of tubes (fire tube or water tube) and used across industries for power generation and processing. Key boiler components and safety equipment help ensure safe operation.
The decision of whether to use a rotary dryer or kiln to reduce moisture in the feedstock often comes up during the design stages of a rotary kiln. This presentation examines the costs and benefits associated with each option.
ADITYA rotary evaporators form the ideal basis for efficient evaporation in your laboratory. They are suitable for standard distillation, complex distilling processes as well as automatic distillation. Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the evaporators. This is reflected in various unique product advantages. Among others, all evaporators are equipped with a separate ON/OFF switch for the heating function. It is also provided with an easy lift, a simple touch operation to lift the flask. With the rotary evaporators, you can as well compose your individual modular concept, consisting of rotary evaporator, vacuum controller, vacuum pump and
chiller. Distil your solvents reliably with the Aditya evaporator. Aditya offers an intelligent solution to process your solvent evaporation easy and safely. Our vacuum distillation system makes evaporating easy for you and allows you to concentrate on your research.
This document discusses an international partnership between Solutions Plus Inc. and Inventa Cleantec Pvt Ltd to provide paper mill cleaning products and services. It outlines Solutions Plus' focus on keeping paper machines running clean to ensure customers receive high quality paper. The document then provides information on global paper industry trends, the major paper industry categories Solutions Plus covers, their applications and products, case studies of customer results, and a list of customers.
Sonix IV Industrial power GT-Series Ultrasonic Cleaning SystemsSonix IV Corporation
The Sonix4 ultrasonic cleaning systems provide the best cleaning performance in the industry for critical cleaning applications. Their GT industrial series features a range of tank sizes from 3 to 90 gallons for cleaning parts and assemblies. The GT models utilize cavitation technology and precision controls to deliver fast, effective cleaning suitable for production, institutional, and job shop environments.
Verderflex Peristaltic Hose Pumps Industrial ApplicationsVerder, Inc.
Verderflex® peristaltic hose pumps and tube pumps are the ideal solution for pumping liquids and dosing chemicals. Ranging from smaller Original Equipment Manufacture (OEM) pumps to the world’s largest hose pumps used in very heavy industrial applications.
The document discusses various powder compaction and densification methods. It describes uniaxial pressing which uses mechanical, hydraulic, or electric presses to consolidate powder materials. It also describes isostatic pressing methods like cold isostatic pressing which uses high-pressure gas or liquid to densify powders within flexible bags or rigid containers. The document provides details on equipment and specifications for different pressing technologies.
Fabhind is an Indian manufacturing company that establishes turnkey construction projects globally. Its mission is to become a leading manufacturer through best efforts and client development. The company was established in 1991 and has since delivered over 100 recycling plants and 50 asphalt plants across India and other countries. It aims to provide comprehensive waste and road construction solutions through advanced technology development.
Presented by Nanophase VP of Operations H. Glenn Judd at the American Manufacturing Strategies Summit in November 2015, the slides review how Nanophase Technologies has used lean manufacturing, operational excellence and continuous improvement to streamline their processes. Learn more: http://nanophase.com/technology/
Weiber convection ovens are designed for high-forced volume thermal convection applications. The convection bench ovens are economical and easily moved to various locations.
This document introduces GreenSpense, a new propellant-free continuous dispensing technology. GreenSpense aims to eliminate the drawbacks of traditional pressurized dispensing methods such as high costs, safety issues, and limited material options. It claims to be more eco-friendly by reducing greenhouse gas emissions and allowing for less preservatives. GreenSpense also aims to unleash packaging design creativity by enabling any material and shape. It is presented as reducing production and transportation costs. The technology has received recognition from cleantech competitions and the document promotes joining the "propellant-free revolution."
This presentation looks at the choice between a rotary drum agglomerator and a disc pelletizer, when looking for an effective agglomeration solution. The advantages of each piece of equipment are discussed for a variety of considerations.
Stop wasting time waiting for the mixerKathryn Perry
Do you find that time is lost waiting for the mixer to fill? And then you waste time waiting for it to empty? What could you do with that wasted time? See how an IBC system can save you all that wasted time.
Competitiveness Through Reduced Production CostsDave Rees
The document discusses optimization opportunities for valves, motors, and steering units that can reduce total cycle times by 25-50% for motors and steering units and 35-70% for valves. It states that higher product quality and reduced machining time through their unique tool solutions can lower production costs and significantly increase productivity.
Your Final Destination for COMPRESSED AIR SOLUTIONS..
world class compressors
drying units
filtration
spares and service
Turnkey Pipeline for air and gas
Rotary kilns are a significant investment in any processing operation, requiring precise engineering around process and product goals. Finding a rotary kiln manufacturer that can design and fabricate a custom, quality solution can be difficult. This presentation provides a guide on some of the factors to consider when choosing a rotary kiln manufacturer for your processing application.
AT Precision, a division of Active Technologies designs and manufactures Low Pressure Injection Moulding solutions from equipment, automation and material supply.
ABOUT DEHUMIDIFIERS
•A machine that removes excess moisture from the air.
•Industrial dehumidifiers are built to be transported and used in several hard-wearing locations.
•Commercial and industrial dehumidifiers reduce mold, condensation dripping from pipes or windows, and eliminate musty smells.
The document describes two 1-part RTV silicone conformal coatings, 1C49LVF and 1C49HVF, designed to protect electronics from moisture and the environment. 1C49LVF has a viscosity of 500 cps and is UL recognized with a V-0 flammability rating and thermal index of 140°C. 1C49HVF has a higher viscosity of 34,000 cps and can withstand high temperatures. Both cure within 10 minutes and provide clear finishes for inspection. The coatings protect sensitive components, cure with ambient moisture, and offer benefits like ease of use and compatibility with automated dispensing systems. Surface cleanliness and proper coating thickness are important for avoiding problems during processing.
Intelligent engineering to maximize productivity and reduce maintenanceX-tec Ag
X-Tec Swiss AG is an international supplier of concrete plants, heating and cooling systems founded in 1990. It has a worldwide market presence and offers modular, economical plants tailored to customer requirements. Notable past projects include works for Holcim, Leighton Contractors, and airports in Dubai and Germany. X-Tec's product lines include stationary tower, horizontal, and mobile concrete plants, as well as pre-casting systems. It innovates with technologies like an automatic rheological probe for real-time concrete monitoring and has goals of constant improvement, innovation, safety, and customer satisfaction.
The document describes the capabilities and features of the NPM series manufacturing platforms from Panasonic. The NPM platforms offer flexible, scalable and integrated solutions for electronics assembly with interchangeable heads for high-speed component placement, dispensing, inspection and other functions. Key features include multi-function heads, high-speed nozzle options, integrated vision systems, board warp mapping, and the ability to configure lines for single or dual-lane production. The platforms allow manufacturers to mix and match technologies and expand capabilities over time as needs change.
Panasonic pick and place machine Npm tt2 Kevin Chen
Mounter: also known as "Surface Mount System", "Surface Mount System", in the production line, it is configured in the dispenser or screen printing machine, is by moving the Mount head Surface Mount components accurately placed on the PCB solder pad. Divided into manual and automatic two.
Automatic SMT mounter is used to realize high speed, high precision and automatic placement of components, is the most critical and complex equipment in the entire SMT production. SMT mounter is the main equipment in the SMT production line. The mounter has developed from the early low-speed mechanical mounter to the high-speed optical mounter, and to the multi-function, flexible connection modular development.
Npm tt2 pick and place machine introductionCarrie Zhang
The automatic placement machine is a device used to realize high-speed and high-precision automatic placement of components. It is the most critical and complex device in the entire SMT production. The placement machine has developed from an early low-speed mechanical placement machine to a high-speed optical centering placement machine, and has developed into a multi-functional, flexible connection and modularization.
ETA provide professional solution of SMT and SMT peripheral equipment.
Main euqipment include Reflow Oven, SMT Printer, AOI, Loader and Conveyor etc.
More detail plz contact us directly.
email : eta2@eta-ele.com
whatsapp/skype/wechat:+86 138 2653 4318
Npm tt2 pick and place machine introductionLucy Xiao
pick and place,pick and place machine,smt line,smt pick and place machine,smt equipment,pick n place,chip shooter,smd line,smt assembly line,pcb pick and place,pnp machine,mydata pick and place,fuji smt machine,pick n place machine,best pick and place machine,yamaha smt machines,panasonic smt machine,pcb pick and place machine,smt placement machine,smd mounting machine,desktop smt pick and place machine,samsung pick and place machine,smd equipment,panasonic pick and place,siemens smt machine,smd placer,pick and place equipment,smd led pick and place machine,led pick and place,smd placement,pcb mounting machine,chip shooter machine,fuji smt pick and place machine,universal smt machines,smt chip mounter,smt pick and place equipment,smd component mounting machine,smt mounter machine
This document summarizes the key features and capabilities of NPM series surface mount placement machines from SMT11. The NPM series offers flexible, scalable and integrated placement solutions. It can be configured with different heads for high-speed placement, multi-function placement and dispensing, and inspection. The machines allow easy swapping of heads to add new functionality. The document also discusses the NPM series' feeding solutions, vision capabilities, board handling capabilities and software.
The Ecoluber automatic lubrication system is a compact, self-contained unit that can precisely lubricate up to 4 points with pressures up to 1,000 PSI. It uses an electro-mechanical pump powered by a 12V battery to distribute lubricant automatically on a customizable schedule. Regular lubrication using this system prolongs equipment life, increases efficiency and safety, and reduces costs from failures and downtime.
Flexim Fluxus Ultrasonic Flow Meters - Flow Measurement In Refineries - Broch...Thorne & Derrick UK
The document discusses non-intrusive ultrasonic flow measurement using FLEXIM's WaveInjector technology. It provides examples of how the WaveInjector has been used to measure flows in refineries under harsh conditions, including temperatures up to 400°C. The WaveInjector allows flow measurement without intruding into pipes and does not require maintenance like conventional intrusive technologies. Its non-intrusive nature provides benefits such as easier installation and maintenance, reduced costs, improved safety, and reliable measurement even at low flows or in dirty environments.
New products - What's new inside the machine? Humiseal®
UV40 Gel
UV40 GEL is a new high viscosity UV curable gel product
Formulated to provide same levels of moisture and chemical protection as current UV40 product range
Designed to be compatible with the HumiSeal suite of UV40 materials
UV40 Gel is a new high viscosity UV curable gel conformal coating formulated to provide the same levels of moisture and chemical protection as Humiseal's current UV40 product range. It is designed to be compatible with their suite of UV40 materials. UV40 Gel is a no slump gel suitable for dam and fill applications to prevent wicking. It offers the benefits of dual UV and moisture cure, strong chemical resistance, compatibility with traditional UV40 coatings, and ease of automated or semi-manual application.
The document discusses two projects at LEONI that focus on improving process control and quality:
1) LEONI Cable Xiamen implemented a new "X piece flow line" production system to increase process safety and quality for cordset production. This system fixes each cord in place as it moves through automated workstations to prevent mixing of products or changes to the production sequence.
2) LEONI Cable Changzhou developed a fully automated line for producing Chinese cordsets to meet high quality standards demanded by customers. The automated line rules out human error and ensures consistent use of approved materials and components. It was approved by customers and authorities within 6 months of the contract being signed.
The Revolution is a high-speed single lane tray sealer that can seal up to 200 packs per minute, making it the fastest and most energy efficient tray sealer available. It incorporates novel technology that provides incredibly efficient and flexible tray sealing that surpasses all previous products. Key features include fully electric operation with zero air usage, quick 2 minute tool changeovers, ultimate sealing flexibility, and high reliability.
Victaulic provides pipe joining solutions for the mining industry, including high pressure piping systems, abrasive service solutions, and no-flame joining methods. Their product line benefits mine owners through reduced installation costs and downtime. Victaulic systems install up to 50% faster than other joining methods like welding, improving safety and reducing costs.
This document summarizes the ProQuick hydraulic coupler system from Prodem Attachments. It highlights the system's quick coupling abilities, durable German construction, optimized oil flow up to 830 liters per minute, and fully automatic dirt protection. The system provides a complete hydraulic coupler solution that is compatible with all major quick coupler brands and increases productivity through faster attachment changes from the operator cabin.
Similar to New products - What's new inside the machine? (20)
SMTA Queretaro Conformal Coating Presentation in Spanish July 2018Humiseal®
La agenda de esta presentacion:
De qué se compone el proceso de aplicación de un Conformal
Cuáles son las “entradas” del proceso
Cómo podemos medir o cuantificar las entradas para su control
Cuáles son las salidas del proceso
Cómo podemos medir o cuantificar las salidas
Cómo defino mi set up en base a las entradas y salidas
Cómo utilizo todos los datos de entrada y salida para controlar mi proceso.
HumiSeal 1C48-1, 100% Solidos, Curado RTV rápidoHumiseal®
Un solo componente, viscosidad baja. Tiempo de curado super rápido. Diseñado especialmente para redicir el efecto de “arrugas” observado comúnmente en los silicones de curado RTV rápido.
New products- What's new inside the machine? Humiseal®
UV40 Solar
UV40 SOLAR is the next product extension HumiSeal brings to the industry
Formulated to give high stability to UV light – suitable for outdoor use tested to SAE J-1960 (accelerated Q-UV). Ideal for photovoltaic applications.
UV SOLAR possesses chemical resistance which is ideally suited also for white goods applications
New products-What's new inside the machine? Humiseal®
Silicone 1C63:
A dual cure silicone material specifically developed for electrical insulation applications
UL recognized, one part material, designed for manual and automated dispensing systems
Fast processing and eliminates shadow area concerns with secondary moisture cure
New products-What's new inside the machine?Humiseal®
A dual-cure silicone material specifically developed for electrical insulation applications
UL recognized, one part material, designed for manual and automated dispensing systems
Fast processing and eliminates shadow area concerns with secondary moisture cure
What's new inside the machine - New productHumiseal®
This document provides information on two 1-part RTV silicone conformal coatings, 1C49LVF and 1C49HVF, from Humiseal. 1C49LVF has a viscosity of 500 +/- 250 cps and is intended for easy application by dipping or brushing. 1C49HVF has a higher viscosity of 34,000 +/- 6,000 cps and is intended for application by syringe or brushing. Both coatings cure in under 10 minutes at room temperature and provide protection from moisture and environmental factors for electronics.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Embedded machine learning-based road conditions and driving behavior monitoring
New products - What's new inside the machine?
1.
2. WWW.HUMISEAL.COM
• 1B58 is the latest high performing
conformal coating which HumiSeal
brings to the industry
• 1B58 builds upon HumiSeal 1B51
synthetic rubber-based product family
• Formulated to give increased
temperature stability
• Operating temperature to 140C
1B58
Synthetic Rubber
3. WWW.HUMISEAL.COM
• One-Part system
• Can be used at temperatures up to
140C.
• Uses non-HAPs carrier solvent (MCH)
• Can be applied by multiple methods.
Compatible with most dispensing
systems
• Fluoresces under UV light
• Ease of rework / removal
1B58
Features & Benefits
4. WWW.HUMISEAL.COM
• Ease of Use
• Higher service temperatures. Compatible
with modern electronic componentry.
• Increased worker safety.
• Ease of Implementation
• Allow for rapid processing and automation
• Ease of Optical Inspection
• Suitable for devices with long service life
1B58
Features & Benefits