A brief application overview showing how NanoFocus non-contact surface measurement and analysis systems are deployed.

1. Gf gf Optical Surface-Measurement Solutions for Micro and Nano Range

2. Applications Roughness (Ra, Rz, Sa, Sz) 2D-Profile, 3D-Form Flatness Co-planarity Wear Volume

3. Typical Applications Life Science MEMS/MOEMS Tools Electronics Automotive Optics

6. Geometry measurement of Fresnel lens Application: Optics Glass surfaces with steep flanks

7. Application examples: - Tool blades - membranes, films, wires Cutting edge of a razor blade Motivation: Acquisition of steep slopes (because of the limitation of aperture) Application: Tools

8. 3D geometry and roughness on steep edges Application: Tools

9. High aspect ratio Steep Edges Pressure sensors Modulator Application: MEMS/MOEMS

11. Application Trends Medical Device Safety Print Woodworking Building Material Solar

12. Application Trend: Building materials ISO 25178 Height Parameters Sp 1.16 mm Maximum Peak Height of the Surface Sv 2.69 mm Maximum Valley Depth of the Surface Sz 3.85 mm Maximum Height of the Surface Sa 0.454 mm Arithmetic Mean Height of Surface Extremely rough Surfaces with high dynamic reflectivity

13. PrintMaster analysis Treshold for reference Laser engraved surface Application Trend: Print

14. Roughness measurement conform to DIN EN ISO (Stitching) r a =3.75µm Application Trend: Print

15. Forensic analyses (BKA, FBI etc.) Crime tools Bullets Application Trend: Safety 100% match needed for legal evidences

16. Application Trend: Safety

17. Application Trend: Medical Laser surgery Measurement of abrasion behavior through height and volume measurements

18. Application Trend: Medical Height Data Microscopy Image Surfaces for blood transport

19. “ lab-on-a-chip” blood/drug analyzer Application Trend: Medical

20. 40 µm SEM confocal Application Trend: Medical

21. 20 10 µm 30 0 µm Coating Thickness Topograph y 0,3 mm Simultaneous measurement of 3D roughness and layer thickness Application Trend: Medical

22. Position X Höhe Reflexion Application Trend: Medical Layer thickness measurement on a stent

23. Application Trend: Medical Joint implants Automatic detection of defects, particles and isotropy

24. Application Trend: Medical Dental crown Measurement of wear through surface correlation

25. Application Trend: Medical Dental implant Latest 2d and 3D ISO parameters

26. Application Trend: Solar Mono and multi cristalline solar cells

27. Application Trend: Solar Textured surfaces Atched multi Si Atched mono Si

29. Application Trend: Solar Laser scribes on molybdenum Quality control of laser trenches

30. Application Trend: Solar Roughness on CIS Latest 2D and 3D ISO parameters