The document summarizes a presentation about a nano internal combustion engine. It describes the main components of the 0.1cc engine such as the crankcase, cylinder, venturi, connecting rods, and piston. It provides an exploded view of the engine and discusses the special tools needed for construction. The summary concludes by mentioning that the nano engine could run at 40,000 rpm and has applications in areas like race cars, aircraft, satellites, and rescuing trapped miners.

1. SRMSCET,BAREILLY
SEMINAR ON
NANO IC
ENGINE
Presentation By:-
Ashish Mishra
Roll No:1474540007
Sem:5th

2. CONTENTS
• INTRODUCTION
• REVOLUTIONS IN ENGINES
• IDEA OF SIZE OF NANO
• MAIN COMPONENTS
• Construction of "Nano" - A 0.1cc engine
• EXPOLDED VIEW
• NANO SPANNER
• CUTTER
SRMSCET,BAREILLY

3. • PISTON CROWN AND VENTURI
• CRANKSHAFT COMPONENT
• WORKING
• APPLICATION
• ADVANTAGES
• CONCLUSION
• REFERENCES
SRMSCET,BAREILLY

4. SRMSCET,BAREILLY
 NANO… one billionth of one and one third of micro ,to be
precise 10^-9 m.
 Nanotechnology is the manipulation of matter on an atomic and
molecular scale.
 It is the technology based upon the scaling down the existing
technologies to next level of precision and miniaturization.
 Nanotechnology in mechanical field is the internal combustion
engine on a Nano scale, which I have chosen as My area of interest.
INTRODUCTION

5. External combustion engine is the heat engine in which fuel
combustion takes place external to cylinder. Due to this it is bulky
and consumes a lot of place.
Second revolutions of heat engines are ICE in which fuel
combustion takes internally and consumes less place and became
compact, cost effective.
Of late third revolution is NANO Internal Combustion Engine.
SRMSCET,BAREILLY
INTRODUCTION

6.  From back plate to drive
washer is less than 1 inch.
 There are no exotic
materials required.
It has high precision ,cost
effective, high speed (up to
40000rpm).
SRMSCET,BAREILLY
INTRODUCTION

7. MAIN COMPONENTS USED
 CRANK CASE
 BACK PLATE
 CYLINDER AND HEAD
 VENTURI AND NEEDLE VALVE ASSEMBLY
 CONRODS AND CRANK SHAFTS
 PISTON AND CONTRA PISTON
SRMSCET,BAREILLY

8.  The Nano is a 0.1cc compression ignition engine - most
frequently, if somewhat inaccurately, referred to as a "diesel".
 It was designed by Richard Gordon and the plans were included as
a supplement with the British Magazine Model Engineer in the early
1990's.
SRMSCET,BAREILLY
INTRODUCTION

9. EXPLODED VIEW OF ENGINE
SRMSCET,BAREILLY

10. Like all model IC projects, there are a few special jigs and tools
required to construct the Nano.
The construction is extremely conventional - only the scale is
unusual.
The constructional cost is just USA$10 only in indian rupees it is
approx RS. 500 .
SRMSCET,BAREILLY
INTRODUCTION

11. NANO SPANNER
 The odd looking thing is a special Nano-Spanner
required to tighten the back plate.
 It also fits the fuel nipple.
SRMSCET,BAREILLY

12. CUTTER
 The cutter is used to form the exhaust ports in the cylinder
SRMSCET,BAREILLY

13. PISTON CROWN AND VENTURI
 The crown of the piston is conical to assist transfer. The contra piston has a
matching concave conical depression.
SRMSCET,BAREILLY

14. CRANKSHAFT COMPONENTS
SRMSCET,BAREILLY

15.  When it is fired, it run briefly, oscillating back and forth about
TDC like over compressed diesels with small mass fly wheels are
wont to do Running!.
 But spring starters are the only way to start ultra small diesels -
hand propping just won't work.
WORKING OF NANO
SRMSCET,BAREILLY

16. Also, the fuel for mini diesels needs a lot of ether - as high as
50% by volume.
With high ether fuel and a spring starter, the little Nano will
burst into life.
Richard Gordon claims it will turn 40,000 rpm.
CONTINUED…..
SRMSCET,BAREILLY

17. APPLICATIONS
 Nano ic engine has various applications ranging from race cars to
space crafts.
SRMSCET,BAREILLY

18. CONTINUED…..
 In race cars this IC Nano engine was used. The engine was fully
fabricated, that is, no castings were employed.
 It can be controlled in aero planes/satellites/space ships etc., The
timing of inlet and exhaust valves.
 According to NASA reports they are experimenting about the use
of Nano engine in Nano & Pico satellites.
SRMSCET,BAREILLY

19. CONTINUED…..
 In case of a mine tragedy where harmful gases are emitted ,these
Nano ic engines can be employed as powerful blowers to blow out
these gases is a time saving & the lives of trapped miners .
 Agriculture pumps sets.
 Every field of industry.
SRMSCET,BAREILLY

20. ADVANTAGES
Adds great power to your engine.
Boosts miles per gallon.
Prolongs engine life.
Cleans combustion chamber.
Protects the environment.
SRMSCET,BAREILLY

21. With the application of Nano in every sphere of life the ‘big’ may
not find its place in engineering dictionary in future.
If we are to continue these trends we will have to develop a new
manufacturing technology.
It will let us inexpensively build Nano system with mole quantities
that are molecular in both size and precision.
NANO TECHNOLOGY WILL DO THIS……..
CONCLUSION
SRMSCET,BAREILLY

22. REFERENCES
www.google.com
 en.wikipedia/nanotechnology/ic_engine
 www.sciencetopic.com/nano_machines
www.bbc.co.uk
chrenich@dstc.com
Weavers journal
SRMSCET,BAREILLY

23. ANY QUERIES?
SRMSCET,BAREILLY

24. SRMSCET,BAREILLY