This document provides a resume for Ramon Escanilla Avellana, a mechanical engineer from the Philippines with over 28 years of experience in engineering and construction projects in oil, gas, petrochemicals, and mining industries. It details his educational background, including a bachelor's degree in mechanical engineering, as well as his extensive work history supervising projects in various countries like Qatar, UAE, Singapore, and more. His roles have included piping supervisor, steel structural supervisor, and mechanical engineer for tanks.

1. RAMON ESCANILLA AVELLANA
ADDRESS:
Block 20 Lot 3 Phase I Cerritos Heights, Daang Hari
Molino IV, Bacoor, Cavite, Philippines 4102
Mobile No. +639184950164 – roaming
Mobile No. +97430661327 - Qatar
E-mail Address : ramon_ramana@yahoo.com
POSITION : Mechanical Engineer
Senior Supervisor
- Structural/Tanks/Mechanical/Piping
General Almost twenty eight years of relevant experience in the field of engineering and
Background construction for oil & gas, petrochemicals, refineries, mining and power holding positions in
workshops and site works.
Education 1982 – 1987 Technological Institute of the Philippines
Bachelor of Science in Mechanical Engineering
Registered – Professional Regulation Commission #40199
Personal Date of Birth : August 10, 1965 Place of Birth : Daet, Camarines Norte
Religion : Roman-Catholic Wife’s Name : Lutgarda Z. Avellana
Civil Status : Married with Three (3) children Weight : 67 kg Height : 168 cm.
Mothers Name : Flora E. Avellana Father’s Name : Angel I. Avellana Jr.
Passport No. EC0694322 Date of Expiry : March 27, 2019
Computer Literate – MS Word/Excel/Outlook Holder of Philippine Driving License
Work April 5, 2015 to March 31, 2016 Piping Supervisor
Experience Qatar Solar Technologies(PMO – Project Management Organization)
(Member of Qatar Foundation) Ras Laffan, Qatar
1. Responsible for supervision of construction works executed by contractors are in accordance
with the approved scope of work, engineering design, ensuring full compliance with safety
and quality standards and verify that works are correctly carried out in accordance with
project documentation and in the planned time frame.
2. Review and provide comments on construction method statements, material submittals
during construction works until completion and handover to endusers.
3. Support the contractors ensuring the feasibility(availability of drawings and materials) of the
works.
1

2. 4. Responsible as performing authority for permit to work by contractors.
December 3, 2013 to April 2, 2015 Steel Structural Supervisor
Samsung Engineering Co. Ltd. Takreer Carbon Black & Delayed
Coker Project – Ruwais, Abu Dhabi – UAE
1. Supervision and monitoring the construction activities carried out by subcontractor including
but not limited to erection and installation of pipe racks, equipment platforms and shelters.
2. Assist in carrying out inspection and testing (fit-up, alignment, bolt tightening, punch list and
final inrks aspection) during construction.
3. Coordination with other discipline at area of assignment.
4. Day-to-day interface with sub-contractors with emphasis on safety and quality
5. Ensure that procedures and processes are understood and followed by sub-contractors.
6. Monitor and ensure compliance with specification, procedures, and plans. Provide on-site
knowledge of project specific requirements
7. Implement project HSE initiatives and ensure compliance with HSE plans and procedures
8. Interface with QA/QC personnel to address quality issues/progress. Provide oversight of sub-
contractor's materials management/verification systems. Monitor workforce progress as
relative to schedule. Monitor arrival of materials. Implement field surveillance plans. Assist
with change process on structures
9. Ensure sub-contractor's on site planning activities are appropriate to meet objectives
10. Provide safety monitoring/leadership/coaching as well as participate in safety meetings
11. Participate, coach and assist sub-contractor personnel in effective pre-task planning
measures in JSA's, and toolbox meetings
12. Participate in on site Risk Assessments and JSA development.
13. Record data for inclusion in the preparation of close-out report
October 23, 2011 to December 2,2013 Steel Structural Supervisor
Samsung Engineering Co. Ltd. Shah Gas Development Project
Hameem, Abu Dhabi – UAE
• At Workshop – Fabrication/Modification (Workshop Supervisor)
1. Supervision of all steel structure fabrication/modification works at workshop according to
approved fabrication and repair procedures.
2. Fabrication of pipe spools and supports for pre-commissioning group requirements such as
steam blowing pipelines among others.
3. Control man-hours allowed for fabrication/modification, ensure all budget are met or
improved.
• At Site – Construction(Site Supervisor)
1. Supervision of subcontractor in the construction of temporary facilities such as
blasting/painting shelter and fabrication workshop.
2. Supervision and monitoring the construction activities carried out by subcontractors
including but not limited to erection and installation of pipe racks and shelters at utilities and
offsite area. Prepare daily progress report of structural steel erected.
3. Ensure that subcontractors will adhere to high standards of safety and quality.
4. Ensure that site works conform to method of statements, procedures and test plans, and met
target completion dates.
5. Ensure that subcontractors adhere to the latest IFC drawings, specifications, procedures and
site instructions.
6. Report all deviations from the original scope of work in writing to the Structural Manager.
7. Assist in carrying out inspection and testing (fit-up, alignment, bolt tightening, punch list and
final inspection) during construction. Prepare weekly progress report of all inspection and
testing activities.
8. Coordination with other discipline at area of assignment.
Februar
y 19, 2011 to August 15, 2011 Sr. Mechanical Engineer - Tanks
New Horizons Company - Ledwood Saudi Aramco Project - KSA
2

3. 1. Project-in-charge for the repair and maintenance of miscellaneous oil and gas storage tanks
including spheroids up to 750,000 BBL capacity at their tank farm – Yanbu Refinery
2. Site Engineer for the replacement of two (2) units Arab Heavy Crude Oil(AHCO) booster
pumps including modification of suction and discharge piping and pump shelter as well as
construction of new pump foundations – Jeddah Refinery.
November 18, 2009 to October 30, 2010 Steel Structure/Mechanical SV
Keangnam Enterprises, Ltd. Ambatovy Nickel/Cobalt Project
Toamasina, Madagascar
1. Review work packages for constructability
2. Supervision and monitoring the construction activities carried out by subcontractors such as
erection and installation of steel structures (e.g. piperacks, vessel platforms, equipment
buildings, shelters) and mechanical equipment ( e.g.
agitators, bins, chutes, conveyors, filters, fans, hoists, hydraulic units, heat exchangers,
mixers, pumps, storage/process/settler tanks, thickeners, vessels ) at utilities/ancillaries and
refinery area. Prepare daily report of equipment installed and tons of steel erected.
3. Ensure that construction activities are carried out to the highest HSE standards
4. Assist in carrying out inspection and testing of subcontractors during construction and
installation. Prepare weekly progess report of fit-up, alignment and bolt tightening.
5. Ensure that construction and installation conform with project standards and will meet
target completion dates
6. Attend safety toolbox talk and progress meeting
7. Coordinate in the preparation of test packages and handover documents
8. Actively participate on programs to develop the capabilities of local construction workers
with particular emphasis on HSE and quality
January 2, 2009 to July 31, 2009 Tank Supervisor
CB&I Lummus – Toyo Engineering Joint Venture Shell Houdini ECC Project
Pulau Ular, Singapore
1. Supervision of construction of steel storage tanks for plant utilities and offsite.
2. Coordination with other discipline at area of assignment.
3. Ensure that job implementation contractor(IC) adheres to the latest AFC drawings,
specifications, procedures and site instructions.
4. Ensure that IC works is according to method of statement and will met target completion
dates.
5. Daily surveillance check and records ensuring that IC will provide safe working conditions
and with necessary permits, PPE, enough supervisors & manpower and reliable well-
maintained construction equipment.
6. Ensure proper change control by issuing field instructions, review technical queries and make
sure that responses are correct and appropriate.
7. Ensure that IC carry-out witness, inspection and surveillance check in accordance with
Quality Control Plan.
8. Ensure that assigned IC interface and well coordinated with other IC’s.
9. Attend safety toolbox talk and daily/weekly coordination meeting, if necessary.
10. Assigned as Team Leader during weekly safety assessment on area of assignment.
11. Ensure that IC complies with HSE plan at site.
December 12, 2007 to September 30, 2008 Steel Structure Supervisor
TECHNIP Consortium Dung Quat Refinery Project
(Technip-JGC-Tecnicas Reunidas) Central Vietnam
• At Workshop – Fabrication
1. Full time supervision at appointed subcontractor workshop during fabrication of steel
structures for off-site and utilities.
2. Observe fabrication condition and call for changes, if necessary.
3. Expedite all priority items to ensure early completion.
3

4. 4. Prepare daily report on all levels of fabrication to the Construction Manager.
5. Act as a channel of communication between site and sub-contractor on all matters relevant to
satisfactory delivery of structures.
6. Ensure that Field Quality Control Plan (FQCP) is implemented and drawings are updated at
workshop to avoid rework on site.
• At Site – Construction
1. Supervision of erection/modifications of steel structures by sub-contractors at area of
assignment.
2. Overall coordinator with other discipline at off-site area.
3. Follow-up RFI’s on area of assignment.
4. Coordination with workshop on remaining and additional items for fabrication.
5. Assume the duties and responsibilities of Steel Structure Superintendent while on home leave
or during his absence such as conducting weekly meeting with sub-contractors.
6. Prepare internal construction punch list for clearing by sub-contractors before final
inspection of PMC/client.
7. Ensure that sub-contractors will comply with HSE requirements at site.
January 24, 2002 to November 24, 2007 Project Engineer
AL ZAMIL METAL/AZTRACON Jeddah, Saudi Arabia
• Mechanical Contractor – Design, fabrication, erec5tion and alteration of above ground steel
storage tanks as per API 650/653 and pressure vessels as per ASME standards other steel structures.
Completed the following :
1. Erection of thirty seven (37) units process/storage steel tanks, thickeners and ore silo at Al
Amar Gold Mine (Ma’aden) - Saudi Arabia.
2. Erection of ore conveyors for GEO Robson at Al Amar Gold Mine (Ma’aden) – Saudi Arabia
3. Erection by jacking system of 36-m dia. X 16.5-m high process water tank at National
Titanium Dioxide Co., Ltd. (Cristal) – Yanbu Al-Sinaiyah, K.S.A.
4. Repair of miscellaneous steel storage tanks during November 2006 Turnaround at
Sabic/Yanpet – Yanbu, K.S.A.
5. Replacement of bottom plates by jacking system of various steel storage tanks at Saudi
Aramco(Luberef) – Yanbu.
Replacement of three upper shell course including rafters and girders of a 48-m x 16—m steel
storage tank at Saudi Aramco (Luberef) – Yanbu.
6. Erection/Installation of pre-engineered and conventional buildings including pipe racks and
pipe bridges at Saudi Soya Bean and Derivatives Plant.
Responsibilities :
1. Review of project related drawings, scope of work, inspection and testing plan (ITP).
2. Modify project execution plan to adapt on the existing situation.
3. Planning and scheduling.
4. General supervision of project activities to ensure productivity and safety of all areas
concerned.
5. Coordination with client and other trade contractors.
6. Prepare project status report and submit to client and head office.
7. Ensure to comply with HSE plan at site.
November 6, 2000 – December 31, 2001 Steel Structure Supervisor
PRIMO OLEOCHEMICALS INC.(PRIMECHEM)
1. Planning, supervision and monitoring of daily construction activities for storage tanks and
steel structures as per implementation of quality policy satisfying project requirement and
satisfaction.
2. Coordination with other disciplines that involve any interfacing in the project.
3. Prepares progress reports to monitor project accomplishment.
4. Ensure all safety, health and environment requirement are effectively and fully implemented.
5. Monitoring overall fabrications, including shop drawings, material purchases, coatings,
logistic and shipment control.
4

5. August 9, 1994 – October 20,2000 Project Engineer
LAWIN TECHNOLOGIES/DADSON MECHANICAL SERVICES
• Mechanical and Electrical Contractor
1. Project implementation and ensure timely completion
2. Ensure that working group will comply with HSE plan at site
3. Coordinate and liaise with clients on conceptual plans as well as project requirements,
standards and operations
4. Prepare project execution plan and drawing up detailed project schedules and costing
October 12, 1992 – February 18, 1994 Project Engineer
Aguilar Consolidated Construction and Industrial Corp. - ACCICOR
• General Contractor Specializing in Fire Protection System and Plumbing Works
Complete installation and commissioning of Fire Protection System of Cebu Holdings Center
(18-storey building) – Cebu City, Philippines
November 27, 1989 – October 15, 1992 Junior Engineer
HAYAMA INDUSTRIAL CORPORATION
• Mechanical and Electrical Contractor
Assigned in refurbishing works of various industrial plant equipment and machinery, conveyor
manufacturing and installation, machinery installation and other related works
July 17, 1987 – Mar. 2, 1988 Millwright/Junior Engineer
BENGUET CORPORATION
• Mining Company
Complete installation and commissioning of mill equipment and machinery for Paracale Gold
Mine introducing Cyanidation Process and perform the duties of Jr. Engineer during operation.
Industrial Pneumatics Design – SMC Pneumatics
Trainings Industrial Hydraulics – HIC Engineers
Steam Engineering – Spirax Zarco
Cylinder Controller Programming – SMC Pneumatics
Turnover Management System – Shell ECC Project
Safety Permit Receiver Course – National Titanium Dioxide Co. – CRISTAL(KSA)
Trainings Permit Receiver Course – Saudi Aramco (Luberef II) – Yanbu
Permit to Work System Training Course – Technip HSSE Dep’ t –Vietnam
Hot and Cold Commissioning Training Course – Shell ECC Project
Hazardous Chemicals And Nitrogen Awareness – Shell ECC Project
Lock Out & Tag Out System – Shell ECC Project
Safety Orientation Course (Manhole) – CB&I – Toyo JV HSE Dep’t (Ministry of Manpower
Accredited Training Provider) – Singapore
Oil & Petrochemical Safety Orientation Course – Shell Bukom Refinery - Singapore
Recognition Top STA (Safety Task Analysis) Evaluator for April 2009 – Shell Houdini ECC Project
Best Employee – Samsung Engineering Co. Ltd. – Takreer Carbon Black and Delayed
Coker Project – Given 12th
of July 2014
Philippine Mechanical Engineering Licensure Examination, 1989 – 79% Passed
Government Career Service Professional, 1989 – 85.95% Passed
Examination
5

6. August 9, 1994 – October 20,2000 Project Engineer
LAWIN TECHNOLOGIES/DADSON MECHANICAL SERVICES
• Mechanical and Electrical Contractor
1. Project implementation and ensure timely completion
2. Ensure that working group will comply with HSE plan at site
3. Coordinate and liaise with clients on conceptual plans as well as project requirements,
standards and operations
4. Prepare project execution plan and drawing up detailed project schedules and costing
October 12, 1992 – February 18, 1994 Project Engineer
Aguilar Consolidated Construction and Industrial Corp. - ACCICOR
• General Contractor Specializing in Fire Protection System and Plumbing Works
Complete installation and commissioning of Fire Protection System of Cebu Holdings Center
(18-storey building) – Cebu City, Philippines
November 27, 1989 – October 15, 1992 Junior Engineer
HAYAMA INDUSTRIAL CORPORATION
• Mechanical and Electrical Contractor
Assigned in refurbishing works of various industrial plant equipment and machinery, conveyor
manufacturing and installation, machinery installation and other related works
July 17, 1987 – Mar. 2, 1988 Millwright/Junior Engineer
BENGUET CORPORATION
• Mining Company
Complete installation and commissioning of mill equipment and machinery for Paracale Gold
Mine introducing Cyanidation Process and perform the duties of Jr. Engineer during operation.
Industrial Pneumatics Design – SMC Pneumatics
Trainings Industrial Hydraulics – HIC Engineers
Steam Engineering – Spirax Zarco
Cylinder Controller Programming – SMC Pneumatics
Turnover Management System – Shell ECC Project
Safety Permit Receiver Course – National Titanium Dioxide Co. – CRISTAL(KSA)
Trainings Permit Receiver Course – Saudi Aramco (Luberef II) – Yanbu
Permit to Work System Training Course – Technip HSSE Dep’ t –Vietnam
Hot and Cold Commissioning Training Course – Shell ECC Project
Hazardous Chemicals And Nitrogen Awareness – Shell ECC Project
Lock Out & Tag Out System – Shell ECC Project
Safety Orientation Course (Manhole) – CB&I – Toyo JV HSE Dep’t (Ministry of Manpower
Accredited Training Provider) – Singapore
Oil & Petrochemical Safety Orientation Course – Shell Bukom Refinery - Singapore
Recognition Top STA (Safety Task Analysis) Evaluator for April 2009 – Shell Houdini ECC Project
Best Employee – Samsung Engineering Co. Ltd. – Takreer Carbon Black and Delayed
Coker Project – Given 12th
of July 2014
Philippine Mechanical Engineering Licensure Examination, 1989 – 79% Passed
Government Career Service Professional, 1989 – 85.95% Passed
Examination
5