This resume summarizes Reda Fathalla Mohamed El Sherbiny's experience and qualifications as a chief petroleum engineer and team leader. He has over 25 years of experience in petroleum engineering roles, including production technology, petrophysics, and drilling engineering. He is currently employed by PETRONAS in Malaysia, where he leads various teams and provides training. Previously he held engineering roles in Egypt with companies including BAPETCO, Tanmia Oil, and EDISON.

1. RESUME Reda Fathalla Mohamed El Sherbiny
Chief petroleu m engineer/Team Leader
Address:
PETRONAS twin tower2, level9
50088 Kuala lumpur – Malaysia
Birth Date 2th October, 1966
Religion Moslem
Marital status Married
Mobile: +60- 12-2231918
+60- 12-3604019
Email: Redafathal@yahoo.com
redafathal@gmail.com
redafathalla.m@petronas.com.my
QUALIFICATIONS
1989 B.sc in Petroleum Engineering, Suez Canal University,
College of
Engineering, graduated with Good.
KEY COMPETENCIES
• 14.0 years of experience in production technology engineering.
• 8.0 years of experience in Petrophysics engineering.
• 1.0 year of experience in drilling engineering.
• Well Integrity Management to mitigate Health, Safety and
Environmental Risks covering all the assets.
• Working on the rig site as a drilling engineer.
• Supervising rig-less operations such as well test, perforation water
shut off.
• Supervising and evaluating open and cased hole logs (LOGIC
software).
• Oil and gas reservoirs field/wells performance analysis.
• RE support for the under balanced drilling project in Bapetco (EGYPT).
• Skilled in both field development studies and reservoir management
optimization
• Coordinating well proposals( development and exploration)
• Working in a team environment.
• Result oriented
1 of 9

2. LOOKING FORWARD IN THE NEXT JOB
• A challenging position in a multinational company in the Petroleum
engineering field preferably petroleum engineer in order to
continuously improve my international experience and apply the
current experience with the other fields.
WORK HISTORY
JUN 2013 – PRESENT
PETRONAS -MALAYSIA
• Work in study team looking for using a new methodology to enhance
the various field performance, such as sand production and mitigate
the corrosion for the production tubing and surface lines.
• Water injection team leader for all PETRONAS projects to reviews and
evaluates water injection clusters performance and discusses the long
term injection test with concerned engineers of other Departments.
• Instructor for water injection course for PETRONAS CAIRGALI petroleum
engineers, production chemist and facilities engineer
• Instructor for ESP application and design advanced course for senior
production technology, petroleum engineers
• Contribute with well integrity team to mitigate the risk assessment and
remedial action for well integrity issues.
• Coach and monitor less experienced staff in line with their staff
development plans.
• Work closely with operations, engineering, well engineering, well
services and other Service Providers and Contractors to optimize
production from existing assets (reservoir, wells and surface facilities)
• Participates in technical studies concerning water/gas injection and
artificial lift projects, oil and gas operations, facilities optimization or
modification, as assigned.
• Work with the Operations team to reduce water and gas handling
costs, justify flow line and common line repairs, manage water
disposal.
• Support deployment of technology to improve well & reservoir
performance in water flooded fields
DEC 2009 – JUN 2013
BAPETCO, EGYPT
• Optimise production team leader, responsible about maximize the well
production rate with optimum cost
• Well integrity team leader, responsible upon all well integrity issues to
make the wells safe.
• Active team player, providing creative and innovative input into
ongoing conformance technology screening studies.
2 of 9

3. • Lead one or more projects with external service providers, conducting
applied research as well as development services in the area of
conformance control technology.
• Training and coaching of less experienced staff.
JUN 2009 – DEC 2009
TANMIA OIL COMPANY - EGYPT
• Work in Tanmia on loan bases from Bapetco and work with Vegas oil
company and prepare the workover proposals for East Ghazalat
concession to prepare the wells for production.
• Study and select the optimum artificial lift method for East Ghazalat
field within Vegas Oil Company.
• Follow up the preparation for water flooding project in NW Gemsa
field.
• Working in EDISON company as a field manager to follow up the
production in the plant and monitor the well performance and
evaluate the sucker rod performance and chemical injection skids for
pour point and Demulsifier
2005 – JUN 2009
BAPETCO, EGYPT
SENIOR PRODUCTION TECHNOLOGY ENGINEER (OIL / GAS RESERVOIRS)
Responsibilities include:
• Team leader of Well reservoir management team ( WRM )
• Follow up the gas lift wells from production point operationally
• Follow up the sucker pumps performance and analyse its
performance.
• Discuss and follow up the gas lift wells troubleshooting such as bottom
hole survey, salt problems, …
• Optimize the gas injection rate for optimum production.
• Preparation for the coming ESP pump design in NEAG field.
• Lead the well integrity management system in order to safeguard the
long term well integrity.
• Leading production technology staff for the competence plan and
career development plan
• Reviews workover, completion, Sidetrack / re-entry & drilling
programmes. Includes reviewing well performance in association with
the geologists and reservoir engineers in order to recommend
optimum programme with the objective of improving production
performance and reducing costs.
3 of 9

4. • Reviews monthly production and well test data. Includes analyzing
performance of the well, identifying wells requiring remedial actions
eg. Artificial- lift/optimization and other workover jobs.
• Monitors and reports to management on daily production and rig
operations. Provide recommendations to optimize production from the
field to improve oil recovery from the field. Also to provide
recommendations to reduce flaring to achieve zero flaring target.
• Monitors water injection performance and recommends regarding any
conformance issues. Provides recommendation to optimize injection
rates and to monitor well integrity. Also to review overall field
depletion performance and recommend necessary measures to
maximize oil recovery from the field. Need to visit field as & when
required.
• Participates in carious Field Development related studies and presents
to the management.
Well Integrit y manage me n t syste m
• Team leader of well integrity management team in Bapetco
• Responsible about Technical Integrity Management System is in place
which clearly defines Roles and Responsibilities in Technical Integrity.
• Adequate resources are in place to assure integrity throughout the life
cycle of facilities.
• Designs are fit for purpose and documented with as-built verification.
• Focal point of risks arising from loss of asset integrity are reduced to
as low as reasonably practicable.
• Responsible about assets shall be operated within specified operating
conditions.
• Well Integrity Management in the company to mitigate Health, Safety
and Environmental Risks and safeguard and demonstrate technical
integrity throughout asset lifecycle
• Report Well Integrity status of Well Stock / KPI’s to Area Team Leader /
Operations Manager.
• Ensure Well Integrity issues are managed during well design and
design changes
• Advisory role during well construction, operation, repair, modification,
and abandonment
1997 – 2005
BAPETCO, EGYPT
SENIOR PETROPHYSICS ENGINEER (OIL / GAS RESERVOIRS)
Responsibilities include:
• Review job with contractors’ engineers before logging. Providing well
and logging report header information. Discuss expected data quality
in known formation and hole conditions with contractors. Address
contractor's needs difficulties and issues and agree on best solutions.
Perform post job data quality and depth control, aligned with building
4 of 9

5. quality database. Analyze logging efficiency. Measure quality
development of service companies.
• BED 15 Water injection team / BED gas Petrophysics engineer
• Undertake petrophysical study work to support and improve reservoir
characterisation.
• Liases with logging contractors to improve resource utilisation
• Contributes actively in the wire line logging tendering, strategy,
negotiations and assists Commercial Division to secure cost effective
and high quality services Contracts. Checks & processes Contractors’
invoices.
• Train, explains, guide and demonstrate conventional and new
measurement and interpretation techniques with its physics,
applications and environmental effects. Full time training to one Junior
Petrophysicist and quarter time training for newly promoted
Petrophysicist. Frequent training of third junior Engineer designated to
other departments.
• Update, review and follow up all safety reports written by service co.,
and analyze safety development index, which is the measure of how
contractors improve in safety practices with respect to quality and
logging efficiency.
• Implement, maintain and improve Petrophysics regulations on data
management, quality, depth, follow- up, interpretation and technical
updates under Universal Petrophysics Integrated Control set of
standards.
• Prepared conventional and SCAL core analysis programs, responsible
for defining the perforation interval.
1992 - 1997
BAPETCO, EGYPT
PRODUCTION TECHNOLOGY
Responsibilities included:
• Preparing the well completion, prepare and execute the perforation
program, follow up the well performance to monitor the oil/gas and
water production to keep the well flowing at the optimum conditions
• Preparing the Coil Tubing operations including acid job, cement job for
water shut off, lifting the well with nitrogen, stimulation job, clean out
sand fill and debris, water shut off using the through tubing bridge
plug technique, water shut off using polymers.
• PLT operation to identify the production from each perforated intervals
and x-flow phenomena, Frac job and doing analysis for the mini- frac to
use it for the main frac job, design gas lift valves for the high water cut
producing wells
• Working on the jet pump artificial lift method, selecting the optimum
method for the artificial lift, regional study for the field.
• Prepares programs and schedules for drillings. Defining and
evaluating options for operating the field development and estimating
capital and operating expenditure over the full field life cycle.
5 of 9

6. • Ensure that all job requirements are undertaken in a safe,
technically ,time and cost effective manner.
• [Refer to Appendix for a detailed history of technical experience.]
APPENDICES
TECHNICAL EXPERIENCE
BED 2/3 Gas field
• I used all available data such as geochemical study, production
performance, and pressure tests to reduce the uncertainties. Three
realizations were built to cover the mean uncertainties, and for each
realization FFD was constricted as managing tool.
• The main out put of this work were: defined the production
optimization strategy, next 2 years drilling activities and issued JG FDP
documentations.
• Current we evaluate the secondary recovery such as water injection or
gas injection to define the optimum development option.
• The other field SHEIBA is oil reservoir, also the FFD model of this
reservoir was built during 2004, and this FFD was used to evaluate and
to define the field development plan.
Obaiyed Field
• Updated the petrophsical data and carried out new permeability
distribution and different gas down to. Obiayed geological model
updated with new data , transferred to MORES.
• PTL (Production to the Limit) workshop had been done for Obaiyed
field with facilitators from PDO Company (OMAN). This workshop is
looking after optimising production. The good thing in such workshop,
the surface engineers is joining subsurface one. Consequently, a lot of
issues concerning the plant and surface facilities have been discussed.
Bed-15A/R"C" Field
• Shared with senior reservoir engineering to carry out a dynamic model
for BED 15 A/R”C”. BED 15 A/R”C” is tidal channel sand stoned, oil
reservoir, wells did not penetrated water zone, reservoir pressure
declined to bubble point after 3 years of production, the reservoir
produced anther 6 years under bubble point, after review all the data
such as: petrophysics, wells performance, geological data, seismic,
recalculated OIIP and this resulted in: extensile of channel, increase net
pay, increase OIIP 2 times, oil expansion main drive mechanism.
Pressure maintenance (water injections) was chosen to increase RF and
production rate.
• Update the petrophysical parameters to evaluate the injection rate,
injection pressure, induced fractures could be happened due to
injection, effect of permeability uncertainty and distance between
injector and producer on production rate and RF.
6 of 9

7. • Carried out TDT to evaluate the current oil water contact to optimize
the water injection rate.
Petrop hysics
• Preparing programs( open hole cased hole) and discussing these with
all petroleum engineering disciplines, geologists, seismologist and
contractor company; Supervising logging operation on site, checking
calibration of logging tools, quality of the data, submitting a report on
the logging operation with well site quick evaluation, calculate porosity/
hydrocarbon saturation/ fluid distribution, and taking decisions for
coming and proposed runs.
• Preparing conventional and SCAL core analysis programs for; FRF, FRI,
in-situ properties to calculate; n, m, stress porosity and permeability,
relative permeability and capillary pressure to determine saturation
height functions and residual saturation.
• Interpretation of open and cased hole logs started by editing and
correcting all logs for hole washout and mud contents. LOGIC, SHELL
software, usually used to calculate petrophysical parameters such as
porosity, water saturation and permeability those parameters usually
corrected to core data. Interpreted formation pressure data to calculate
original and current (FWL, OGC, communication and depletion) and
submitted petrophysical evaluation report for each well.
• Carried out two integrated petrophysical studies in BED area (oil) and
Obaiyed area (gas). In both studies started by making inventory for all
available data core: data Conventional and SCAL, open and cased hole
logs, production data, petrophysics evaluation reports and previous
studies. The main successful in BED area defended current FWL (using
TDT and PLT campaign) in produced formation and this add room for
anther three wells, increased net pay thickness twos by correction logs
to core data. Obaiyed area study defended the original GWC,
permeability distribution and water saturation that calculated by two
methods: open hole logs and saturation height functions.
• Co-operated with reservoir engineer and production geologist for
building static and dynamic reservoir models. Co-operated with
geologist for geological facieses, and reservoir parameter distribution,
seismologist by editing sonic and density logs. Defended the perforation
intervals, Coach and mentor the less experienced staff in line with the
staff development plans.
• Undertake petrophysical study work to support and improve reservoir
characterization.
• Plan and monitor cost-effective logging, coring programs.
• Contribute into well proposals preparations and co-ordinate integrated
well evaluations
Production Technologist
• Follow up the well performance to monitor well productivity to keep the
well flowing at the optimum conditions.
• Build well lift curve model for dynamic model and well production
control. Preparing well test design & PVT sampling.
• Prepare and execute stimulation programs as perforations; water shut
off using cement; chemicals; through tubing bridge plug, acid wash and
frac.
7 of 9

8. • Prepare and execute frac program, analysis mini- frac, design main frac,
and evaluate frac job with reservoir engineer.
• Gas lifts design and follow up the well in order to choose optimum gas
valve depth and gas injection rate.
• Well completion; work over and cased hole logging PLT & TDT
evaluation. Sharing field development plan
Field Experiences
• Design and excute all the stimulation methods operations in the field
such as frac, acid, injectivity,….
• Design and run ESP and suckerrod pumps operation and start up
procedures.
• Perforation Jobs in development wells (using Ener-jet, pivot and TCP )
• Water shut off Jobs using TTBP zonal isolation
• Initial production test for an exploration wells.
• Different work over job.
• Bottom hole pressure surveys for gas/oil wells.
• Kick off the wells by using Nitrogen.
• witness many wire line jobs during the initial training period
• Such as: Gauge cutter for cleaning the tubing, Installing lock mandrels
in different landing Nipples and Running with memory gauges.
• Sharing supervising hydraulic fracturing design and execution for the
one year with S.A Holditch & Associates, Inc Consultants, Pinnacle
Technology Consultants and SEPTAR Expertise’s “Shell International for
Exploration and Production Technology and Research”. Total numbers
of sharing jobs are 3 frac operation design and execution.
MEMBERSHIPS
• Egyptian engineering syndicate. ( Member no. 05/10149 )
• Society of Petroleum Engineering, SPE ( Member no. 1566561)
• Society of petrophysics engineering, SPWLA
INTERESTS
• Reading, Football, volleyball, tennis table
T
ECHNICAL
TRAINING
• Technical report writing; the American University in Cairo, Egypt.
8 of 9

9. • Frac. and acidizing seminar; Dowel Schlumberger, Cairo, Egypt.
• Perforation workshop; Schlumberger Office; Cairo; Egypt
• Windows 95 introduction & Advanced; Career 2000 Computer Co.,
Heliopolis,
• Word 7.0 Beginners; Career 2000 Computer Co., Heliopolis, Cairo,
Egypt.
•
• Excel 7.0 Beginners; Career 2000 Computer Co., Heliopolis, Cairo,
Egypt.
•
• Production technology course ( P264 ) in Shell Training center;
Holland and field trip to Belgium, Jan 96
• Gas lift optimization seminar, Halliburton Office, Cairo, Egypt
• Workshop for perforation gun type, Shlumberger, Marsa Matrouh,
Cairo, Egypt
•
• Logging tools workshop, Schlumberger, Cairo, Egypt
•
• Advanced Completion Technology, Halliburton, Cairo, Egypt
•
• AIX / 6000 4.1 for users; IBM, Egypt.
• Using MS - office; Sarhank Computer Co., Cairo, Egypt.
• NMR logging tool. Halliburton, New Maadi, Cairo, Egypt
• Training course in Petrophysics course ( P262 ), Shell Training centre,
Holland, Feb 98
• BED 1 study Bahariya & A/R”F” formation with Halliburton in
Aberdeen UK
• Communication Skills course by APROMAC, Cairo, Egypt
• Safety course in Bapetco office, Cairo, Egypt.
• Intermediate logging analysis by Schlumberger
• Water flood course by Shell, Cairo, Egypt, July 2010
• Technical writing course in the British Council, 5 days,
• Routine & Special core analysis by ACS Lab, Cairo, Egypt, 3days,
• G180 Subsurface integration in Holland, Shell Learning, April 2006
IMPORTANT PAPERS
• Sharing in the second international symposium on improved recovery
(Tripoli – Libya Conference and presenting the paper titled” Cost
effective Formation Evaluation using the magnetic resonance
imaging log (MRIL )in Obaiyed
Field, western desert, Egypt.
• Participate in MOC 2008 in Alexandria, Egypt
9 of 9

10. COMPUTER SKILLS
 Good user for Microsoft office (Excel, word, PowerPoint, Project)
 Use UNIX System.
SOFTWARES
 WEPS and prosper softwares for lift curves(Inflow and out flow
performance), HORVIP, for determining productivity
 LOGIC (petrophysical interpretation , SHELL product)
 TechLog ( new log analysis software )
REFERENCES
Mr. Roger night,
Shell Egypt
Optimize production team leader
Phone: (2012) 22352774
Mr. Hein Knipscheer,
Senior Geologist, Shell Egypt N.V.,
BAPETCO, Egypt
Phone: (202) 292 – 5323
Dr. Awad Allam
Manager Tech Prof
Lan Landmark Graphics, Middle East
Halliburton
Cell: (0020) 12 783-0826
Mr. Merill Keen
Petroleum Engineer manager
Shell, Brasil
10 of 9