Muhammad Nadeem is an electrical operation and maintenance technician with over 14 years of experience. He is currently working as an electrical technician for OMV Exploration and Maurice Energy Ltd Pakistan. He has held previous positions as a senior electrical technician and electrical technician. Nadeem has extensive training in electrical systems, safety procedures, and maintenance. He seeks a challenging position where he can utilize his skills and experience.

1. MUHAMMAD NADEEM
ELECTRICAL OPERATION & MAINTENANCE TECHNICIAN
PLEASE REPLY TO
CHAK # 105/15-L,
VANJARI TEHSIL MIANCHANNU
DISTRICT KHANEWAL PAKISTAN.
Contact #: +923006881604, 00923087769044
E-mail: ch_nadeem80@yahoo.com
Ch.nadeem80@hotmail.com
OBJECTIVES
Looking for a challenging position that enables me to contribute and use my competence
Capabilities, skills and academic education which helps the community, and enhances my
Practical working experience and ready to learn.
ACADEMIC QUALIFICATIONS
WORKING EXPERIECE 14years
POSITION COMPANY FROM TO
ELECTRICAL
TECHNICIAN
OMV EXPLORATION AND
MAURICE ENERGY
LTDPAKISTAN
05/04/2013 CONTINUE
SR ELECTRICAL
TECHNICIAN
PAK ARAB FERTILIZER MULTAN
PAKISTAN
04/10/2006 04/04/2013
ELECTRICAL
TECHNICIAN
FAUJI FERTILIZER COMPANY
SADAKABAD PAKISTAN
05/12/2005 03/10/2006
APPRENTICES
ELECTRICAL
TECHNICIAN
FAUJI FERTILIZER COMPANY
SADAKABAD PAKISTAN 29/10/2003 28/10/2005
ELECTRICAL
TECHNICIAN
SUI NORTHERN GAS PIPE LINE
COMPANY PAKISTAN 08/09/2000 25/10/2003
OFFICIAL TRAINING
 Training on Electrical Relays testing and calibration conducted by FFC
 Training on storage batteries conducted by FFC
 Training on Hazardous Areas Classification and Hazardous Material Response
conducted by FFC/OMV
 Training on Work Permit Procedure (conduct by FFC / Pakarab Fertilizers /OMV)
 Training on Fire Fighting(conduct by FFC / Pakarab Fertilizers/OMV )
 Training on Confined Space and Rescue conducted by FFC/OMV
 Member on Fire Fighting Emergency Response team at FFC/OMV
 Electrical Safety & General Safety, Safety Equipment and First Aid Training conducted
by FFC/ OMV
 Training on first AID
Exam. Institution Board Year
Matric (Sc) Govt.H. S. School Vanjari Multan 1997 1st
DAE Elect. GCT Sahiwal PBTE Lahore 2000 1st
M.S Office National Computer College Multan Multan 2002 1st
B-Tech (Pass) Preston University Kohat Kohat 2010 1st
1

2. SPECIAL TRAININGS
 Safe Operating Procedures (SOP)
 Work Permit Procedures
 PSRM( PROCESS SAFTY AND RISK Management System (IMS)
 Fire Fighting and use of protective equipments
 Computer Literacy
SAP
SAFETY CONSCIOUS
 Fully aware of industrial safety & its compliance Health, Safety and Environment (HSE)
and permit-to-work (PTW) system against personal safety as well as plant safety or
emergency handling.
 Follow the SAFETY procedure standards like Housekeeping, Work Permits; Fire fighting,
Noise pollution, Confined spaces, Excavations work, First Aid and uses of PPE (Personal
protective Equipment), Incident/Accident investigation.
Member of safety committee to discuss the issues about safety health and environment and
to aware peoples about risk and personal safety through tool box talk and safety meetings
and take actions to prevent unsafe acts and working inside the plant area.
ERECTION AND COMMESIONING
I HAVE ERECTION AND COMMECTION EXEPERENCE AT OMV MEHER FIELD OF
MOTORS, GENERATORS, SWITCH GEAR, UPS, CP SYSTEM DIESEL ENGINES
MY RESPONSIBILITIES
 Ensure facility system and safety critical equipment’s are maintain in a safe and efficient
manner and provided supervisory support for reliability and integrity management
 Supervise/perform scheduled maintenance activities (corrective and preventive) on
variety of electrical equipment’s (generators, motors, VFD, soft starter, UPS etc.)
 Supervise subordinate /contractor jobs and ensure compliance with safety requirements,
timely manner and as per standards procedures.
 Prepare pertinent electrical maintenance procedures and required task risk assessment
for critical activities, and then ensure that job is carried out strictly in accordance with
TRA.
 Coordinate with operations and other disciplines to plan the safe and successful
maintenance of equipment and Facilities
 Participate in carrying out the annual turnaround(ATA) or major equipment turnarounds
in the Plant
 Supervising and coordinating the evaluation of machinery operation and condition
through maintenance, inspection and testing as well as critical device function test
(CDFT)
 Perform inspection, repair, adjustment, testing and calibration of electrical and
instrument Equipment and systems in accordance with pertinent technical manuals,
drawings Manufacturer’s specifications and standards.
 Ensure accurate documentation of completed work is captured on work orders
 Raise material services requisition (PR) of necessary spares, tools and materials in
CMMS (SAP) and on its arrival at the site identifying any divergence of the same from
the original documents. Ensure that adequate levels of spares are maintained and spare
parts consumption by revising E&I Maintenance procedures to reduced plant downtime
2

3.  Adhere to maintenance planning and schedules. Ensure compliance with safety
requirements and Standards procedures
 Helps superiors for planning and scheduling outage works with due regard to annual
scheduled Turnaround.
 Prepared scope of work for plan maintenance. Provides technical support during
implementation of electrical projects work.
 Investigated and analysis equipment failures and prepare report to remove root cause
 Investigated and analysis equipment failures and prepare report to remove root cause
 Troubleshoot identify actual and potential problems areas and implement solutions to
ensure Maximum effectiveness, best practices application.
 Communicates effectively with others, both verbally and in writing.
 Attended important in house meeting and trainings and implementing their importance
 Carry out roles and responsibilities of superior during his absence
 Implement of organization's safety policies at site
PRACTICAL KNOWLEDG & EXPERIENCE
TRANSFORMERS (ABB, Siemens, Brush, PEL)
LV & MV transformers rated 100 kva to 5 MVA
Preventive and Corrective Maintenance, Field Servicing, Oil Testing and Replacement of oil ,
Inspection of Both LV/HV Side Bushing Insulation testing, testing of Transformer Safety
Devices Relay Testing, Tap Changers, Insulation Test and etc
GENERATORS(General Electric, BBC, Cater Piller, MTU, Waukesha)
Perform Inspection ,maintenance ,replacement, trouble shouting ,testing of Gas turbine,
Steam turbine, diesel engine and gas engine generators( 400V to11KV,18.5Mw,and its
protection system
Commissioning of Generator safeties, AVR and electronic governor, interconnection wiring,
replacement and maintenance of spark plug ignition system. General troubleshooting/
maintenance of exciter, generator and engine as well
Diesel Engine Driven Generators Overhauling, Maintenance, troubleshooting, of Governors,
AVRs, exciter, Rotating Rectifiers
TRANSMISSION LINES
400V,11KV to 132KV
Preventive and Corrective Maintenance, Field Servicing,and testing of its protection system
MOTORS (ABB, Siemens, Inslado, Loher, Bauer euro motri )
LV & MV motors & MOVs (Limitor Biffi) rated up to 0.75kw to 4000kw respectively, Perform
Preventive and Corrective Maintenance. Overhauling, new installation, insulation testing and
over all Inspection of LV and HV Motors.
SWITCHGEARS (ABB Sace, AEG, Nova Magrini Galilo Itly, Siemens,
Terasaki, GEC UK schenider electric )
Perform preventive, corrective maintenance, replacement trouble shouting, repairing work
on following types of breakers SF6, VCB, Vacuum Contactor, OCB, ACB, Air Magnetic CB
rated MCCB.MCB. Magnetic contactors up 3200 A 11KV on MV/LV also testing of all above
breakers and contactors ,and its protective relay system. I have very good trouble shouting
techniques of control and power system of all above breakers on all types of circuits
VARIABLESPEED DRIVE&SOFT STARTER UP TO 4 MW:
Perform preventive maintenance of VFDs and soft starters also Checking of power FET, s
and SCRs. Setting and testing of over load and short circuit protections, VFDs and soft
3

4. starters of ABB up to 200 kW.
PROTECTIVE RELAYS (CEG France, Fir Italy, Siemens, ABB,GE)
Electro-magnetic, Electro-static/Microprocessor based /Numerical protective relays
Familiar with operation and testing of Micro Processor Based Generator, Transformer
Protection Relays, Electronic and Microprocessor type. like Earth fault, over
current, Differential, under/over voltage, Under/Over frequency, Loss of
excitation, over fluxing, Under Impedance, Negative phase sequence and
thermal image and etc
UPS (Sice, Alamo 8,.Borri)
Perform preventive .corrective maintenance, replacement of parts and trouble shouting work
on Online UPS rated up to 2x80 KVA
BATTERIES (Saft france, Varta Alcad)
Perform maintenance, replacement and testing according to its maintenance and new
installation of Lead Acid and Nickel Cadmium batteries for UPS, DCP, and other dc sources
CABLES (Oconite, Kerpenwerk, Pakistan, Newage. oman cables )
Perform cable Laying, lugs connecting, Jointing, Gland installation and terminations
.insulation testing of LV and HV cables up to 600mm2 .XLP, PVC .EXLP.also oil filled paper
insulated cables
MISCELLANEOUS
PA System, Rotary & Static Frequency Converters, Mercury, Sodium & Incandescent lights,
Hoist cranes , Lathe Machines, Power Grinders, Industrial & Domestic Electrical Wiring
Thermocouples and R.T.D (Resistance Temperature Detector), Control Valves Actuator,
Damper and Positional, Electro-Pneumatic Converters, Load Cells, Transducers and
Sensors (DP, Magnetic, Ultrasonic, Proximity, Optical, Floating and Radio Active type),
Manifolds, Pressure Safety Relief Valves, Solenoid, Motorized Operated Valves,etc
FAMILIAR WITH USE OF
Battery/hand operated Megger, Analog/Digital Multimeter, Analog/Digital Ampere meter,
RTD Decade Box, Lux Meter, TTR Tester, Temperature Detector, Milliohm Meter, ELCB
Tester, Clamp-on Grounding Resistance Meter, Explosively Tester, Oil Treatment Machine,
Cable Fault Locator, Current Injection &relay testers set etc.
PERSONAL BIO-DATA
Father’s Name : Muhammad
Ashraf
Date of Birth : 09-02-1980
N. I. C. No. : 36104-0432034-9
PASPORT NO : BG9450342
Marital Status : Married
4