1. SURESH ONTERU
Contact No.: 08332964944
E-Mail: onteru.suresh@gmail.com
In pursuit of challenging and enriching middle managerial assignments in Operation/Maintenance/Automation with
an organization.
PROFILE SUMMARY
A result oriented professional with over 6.5 years of experience in:
~ Maintenance
~ Troubleshooting
~ Instrumentation
~ Industrial Automation
~ Material Procurement
~ Erection & Commissioning
~ Documentation
~ Electrical Engineering
~ Liaison & Coordination
~ Controlling & Monitoring
Power
~ Fault Analysis
ORGANIZATIONAL EXPERIENCE
PRESENT EMPLOYER: M/s. KEOLIS HYDERABAD MASS RAPID TRANSIT SYSTEM, Hyderabad.
Building Management System and Fault Controller-MEP (August 2014 – Present)
Key Results Areas:
Currently associated with KHMRTS (Hyderabad Metro Rail) world’s largest PPP (Private Public Partnership)
model metro rail project, having three corridors of total 72 KM with 66 elevated stations.
Involved in the Erection and Maintenance of 1.0 MVA Distribution Transformer.
Involved in the Erection and Maintenance of Protection relays of Transformers and Feeders.
Involved in the Erection and Maintenance of 415V LTMDB panels.
Experienced in all kinds of cable laying, terminations and PANEL mountings.
Experienced in erection, cabling and commissioning of panels like MCC and PCC.
Erection and Maintenance of switchgears like vacuum circuit breakers and air circuit breakers.
Erection and maintenance in 200 KVAR (415V) capacitor bank operated with APFC controlling.
Designing and developing PLC, SCADA, and Electrical Drawings as per the Operations requirement.
Involved in Erection and maintenance of Fire protection systems like Panel flooding system, Clean gas protection
system, Sprinkler system and Hydrant system.
Involved in Erection and maintenance of Fire alarm system like FACP, Smoke detectors, Heat detectors, Multi
criteria detectors, Hooters and Signage boards.
Involved Maintenance of Chillers, AHUs, CAHUs, Split ACs, VAVs, Dampers and Ducting.
Maintenance and troubleshooting of VVVF Drives (Danfoss make) for AHUs.
Maintenance of Public health engineering works like Water Supply with Hydro pneumatic System, Sewerage
system, STP, ETP, Sewage transfer pumps , effluent transfer pumps , dewatering pumps, Roof gutters and rain
2. water down take pipes, Rain water harvesting, Excess storm water disposal system and Solid waste management
system.
Follow up with Lifts and Escalators failures with vendor (OTIS).
Got trained for Lifts rescue operations like ARO, ERO and MRO.
Monitoring and Controlling of equipments and auxiliary power supply at Stations, Depots and OCC from BMS
workstation.
Reviewing documents like O&M manual, Training manual and Snag list preparation.
Updating Data in AMS (Asset Management System).
Responsible for elaborating Reports like Incident reports and Fault investigation report.
FIRST EMPLOYER: M/s. SBQ STEELS LTD, Gudur, Andhra Pradesh.
Electrical Engineer (October 2009 – December 2013)
Key Results Areas:
Erected & commissioned 30sq.meter SINTER PLANT (India’s first launched Brazil technology).
Erected & Commissioned 9No.s of 11kV HT panels (KIRLOSKAR Make).
Hands on experience in servicing of 1250A VCB's of Make: KIRLOSKAR(type:C500)
Involved in the Erection and Maintenance of 1.5 MVA Distribution Transformer.
Involved in the Erection and Maintenance of Protection relays of Transformers and Feeders.
Modification of vendor drawings and panel drawings for both HT & LT sections.
Troubleshooting of control circuits in both HT & LT sections.
Commissioned VVVF Drives (Telemechanique make) and their maintenance and troubleshooting.
Erection, Commissioning and maintenance of 1.35MW of SLIPRING INDUTION HT MOTOR start with LRS, 625
KW INDUCTION HT MOTORS, and Its protection.
Commissioned and Troubleshooting of DOL, R-DOL, STAR-DELTA, TWIN DOL, TWIN R-DOL starters.
Calibration and trouble shooting of WEIGHFEEDERS (MAKE: SCHENK PROCESS).
Operation and maintenance of instruments like Level switches, Pressure transmitters, Flow transmitters,
motorized control valves, Temperature transmitters.
Commissioned GE FANUC Automation (90-30) series.
Modification of Programming ladder logic as per operational requirements.
Troubleshooting and maintenance of RIO panels.
HIGHLIGHTS:
• Cleared RDSO (Research & Design Standards Organization) test as per Railway Standards.
• Attended training for L&T Ivision Max BMS SCADA.
• Got Trained for MEP systems (like. Electrical, HVAC, PHE, Fire protection System, Lifts and Escalators)
• Got trained for CCTV and ACIDS for Hyderabad metro rail.
• Attended First aid Training and Fire safety system.
3. • To provide on-the-job training to new recruiters.
KEY SKILLS:
• Able to remain calm and objective particularly during challenging incident related situations.
• Has competent and proven analytical ability.
• Is able to diagnose technical malfunctions, interpret and apply solutions from written and verbal information.
• Able to anticipate and react to situations.
• Proactive in identifying and resolving issues.
• Capable of giving precise, clear and concise instructions remotely.
• Rigor in executing and applying instructions and procedures
• Able to relay oral and written information to both direct reports and superiors.
• Has a strong oral and written communication skill.
• Able to elaborate technical reports.
• Has technical understanding and experience.
• Able to understand and identify risks involved.
ACADEMIC DETAILS
B.Tech in Electrical & Electronics Engineering from Mekapati Rajamohan Reddy Institute of Technology & Science,
Udayagiri, JNTU Anantapur in 2009
PERSONAL DETAILS
Date of Birth: 05th
June 1987
Nationality: Indian
Marital Status: Married
No. of Dependents: 4
Permanent Address: Madapalli (Vi&Po), Chejarla (md), SPSR Nellore (dt), Andhra Pradesh, India - 524341
Languages Known: English, Telugu and little of Hindi
DECLARATION
I declare that the above particulars are correct and genuine to the best of my knowledge and belief.
Place : Hyderabad yours sincerely,
Date: (O SURESH)