Ali Ahmad is seeking a position as an industrial electrician with over 20 years of experience in commercial, industrial, and manufacturing settings. He has extensive experience installing, maintaining, and repairing electrical systems and equipment. Ahmad has a journeyman electrician certification and additional training in areas such as PLCs, network wiring, and computer skills. He has a strong safety record and is skilled at troubleshooting, preventative maintenance, and quality assurance tasks.

1. ALI AHMAD
5447 Longford Dr
Mississauga, L5M6L4
780-984-2599
ali.ahmad202@gmail.com
Objective
To obtain a position as an Industrial Electrician or Electrician.
Summary of Qualification
Strong Safety Record. Equipment Troubleshooting & Repair. Preventative
Maintenance. Strategic Team Player. Installation. Heat Tracing. Termination
& Testing. Quality Assurance. PLCs & Controls. VFD Drives.
Motor Control Center.
 Over Eight years of experience as an Electrician Industrial & Commercial building
In road and bridges construction, and production plant.
 Results-Oriented, Safety conscious, team player with strong interpersonal
Electrical Maintenance Planning and organizing skills.
 Experienced in CMMS of Motors, Pumps, Conveyors, Hydraulic, Pneumatic
Mechanical, Electrical, Electronics PLCs, Compressors, Turbines, Pressure
Vessels, Computer controlled equipment’s Lock Out and Tag Out, systematic
job orders and data.
 Coordinate with different Department Producers and work instruction related to
ISO 9001 and 14001 Requirement
 Base maintenance record system, Maintenance planning, coaching and training
of staff, safety and environmental issues
 Maintain and repair production-related machinery and upgrade skills on an on-
going basis.
 Strong Knowledge of P&IDs, Drawings/Blue prints, manuals and operational
spares projects, fabrications and modifications, workshop machineries, Quality
control and Inspection.
 Developed strong trouble-shooting skills after many years of servicing motor
machines and electrical panels in Oil Fields Shut Down.
 Long-term exposure to fast-paced manufacturing environments has led to a high
capacity to working stressful and hazardous situations.
 Test equipment and components for current, continuity and voltage; Maintain,
repair and test switchgears, transformers, regulators and reactors;
 Attentive, active listener, fast learner, and self-start.
 Travelling on my previous job all over Alberta high level to red earth, mostly
every corner of Alberta.
Education & Training
 Journeyman Electrician (442 A) inter provincial Red Seal
 Apprenticeship in General Electrician from Shipyard and Engineering Works Ltd.
 Bachelors of Arts Degree
 First Aid, CSTS, WHIMIS, Fall Arrest. Areal work platforms

2.  PLCs, & Network Wiring & Troubleshot Course from NAIT.
 Computer Skills and Desktop Office Software. George Brown College, Canada
Professional Experience.
Industrial Electrician
Carmacks Enterprise April 2011 to Nov 2015
 Install or replace different hp and types of motors.
 Install or replace and programming different types of VFDs (Lesson, A.B etc.)
drives.
 Install or replace different soft starters, reactors, transformers.
 Install or replace different amps overloads and contactors.
 Install new 480v 1200 amps main circuit breaker with new wiring.
 Install new Main breaker 480v 1200 amps to 15 amps circuit breaker.
 24v to 120v new control wiring for plc system to control M.C.C.
 Install 230v twist lock receptacle wiring.
 Working on 45 to 65 KVA Gensets. Working on different lighting tower.
Industrial Electrician
Kiewit Energy Fabricators Corp Jan 2011 to March 2011
 Install cable trays. Install control panels. Heat tracing.
 Install bonding and grounding to the cable trays.
 Splice, joint and connect wire to fixtures and components to form circuits
 Install brackets and hangers to support electrical cable and cable trays.
 Ensure all electrical maintenance operations are in compliance with applicable
regulations and trade practices.
 Operate machines tools such as grinder, cutting saw, drill machine.
Industrial Electrician
S.M.T Equities ltd. Feb 2009 to Dec 2010
Maintained more than 400 apartments in different buildings in Edmonton.
Troubleshooting repair and replace of electrical equipment’s,
Maintaining HVAC the electrical components in an HVAC system, install new
Wiring for 400- 60 amps panel boards including all electrical wiring and controls.
Test fire alarm system, install and replace and isolate faults. diagnosing and
Solving different problems in an apartment complex, such as fixing electrical
Switches, checking fluid levels, replacing machine parts, preventative
Maintenance tasks to make sure that building do not deteriorate and all is
functioning smoothly.
Industrial Electrician
Auto Power Engineering Jan 2004 to Jan2009
 Service and Maintenance of different types of electrical equipment.
 Read blue print drawings and preformed troubleshooting duties.

3.  Installed field instrumentation for new and retro-fit applications.
 Electrical installations and equipment maintenance; i.e. line maintenance,
transformers, up-ratings of transformers i.e. bringing in reinforcement
transformers, dividing the medium voltage lines to equalize loads, and
maintenance of the switch gear, ring major units and the sf6 circuit breakers
 Oversaw the production and maintenance of Control Car Cables and related
Machinery
 Assisted in troubleshooting and repair of die casting machines, heavy duty
generators, overhead cranes, motors and pumps..
 Engaged in continuous improvement activities and analyzed and recorded test
Results
 Maintenance of generators, electrical motor transformer.
 Troubleshoot and isolate faults in electrical and electronic systems and remove
and replace faulty components.
 Checked Panel View to trace and troubleshoot pneumatic machinery and
mechanical press.
 Install and replace limit switch, Photo Sensor, Smart Speed Controller and
electrical control and distribution equipment, such as switches, relays and circuit
breaker panels
 Ensure all electrical maintenance operations are in compliance with applicable
regulations and trade practices
Magna International,
Plant Operator Feb 1997 to Sep 2003
Worked as a plant Operator at different plant through H C R from in
Magna International.
I have my own Steel-toed safety boots, and having some hand tools
Reference available on request.