Mouneer ALJebn is seeking a position as an instrument and control supervisor with over 10 years of experience in commissioning, preventative maintenance, and troubleshooting of instrumentation and control systems. He has worked as a senior instrument and control technician for Abu Dhabi Gas Industries and as an instrument and control engineer for CONOCO PHILIPS, where he oversaw maintenance activities and ensured safety and quality standards were followed. ALJebn has extensive technical experience and qualifications along with leadership, communication, and computer skills.

1. Mouneer ALJebn Resume
Instrument &control Supervisor
Name: Mouneer ALJebn
Date of Birth: 8/5/1980.
Nationality: Sudanese
Marital Status: Married
Education: Bachelor degree in electronic and electrical engineering.
Home address:United Arab Emirates (UAE) – Abu Dhabi.
Contact. Mobile No. : +992289209922
E-mail: mouneer180@hotmail.com
Career objective
Proudly have experience more than 10 years, I am looking for a good position in
the field of instruments and control in a prestigious company where previous
skills and capabilities can be put to efficient use. I possess effective organizational
skills and the ability to supervise a team and develop the final output .
 Career History
 Period : Oct ‘2010 Till 6102
Abu Dhabi Gas Industries Ltd – GASCO
PositionSenior instrument and control Technician
Responsible for
 Commissioning, pre commissioning and plant start up procedures
 Permit to work originator and Personin charge of work site(PICWS)
 Perfume Preventive maintenance PM, Break down, shutdown maintenance
 Calibrate, configure and installment all type of electronic transmitters
ROSEMOUNT, HONYWELL FOXBORO
 Calibrate, assemble and disassemble control valves with its accessories
positionrs Masoneileian SVI1,SVI2, Flowserve, FISHER….
 Experience in shutdown and ON/OFF valves with their accessories (solenoid
valve, limit switch) troubleshooting and PST (partial stork test).
 Conversant with BENTLY NEVADA 3000, 3500 troubleshooting and
RACK configuration.
 Experience to check all types of switches (pressure, level, temperature, flow)
micro and proximity switches.
 Maintenance & calibration of turbine governor controlsystem

2.  Maintenance and calibration of different analyzers : Conductivity, Chlorine,
PH, SDI, Redox, Turbidity, TDS ( Endress and Hauser(
 Conversant with controlsystem PLC(Siemens, Allen Bradley…)
YOKWGAWA Centime 3000 DCS, SCADA, BMS,F&G,TCS
 familiar with Field bus, SMART instrumentation, SIS systems, Telemetry
(SCADA), HIPPS and Intelligent well completions Spares balance
investigation and inventory control for all instruments’ spare parts
 conversant with steam boilers MACHI operation and maintenance
 conversant with instrument Air compressors operation and maintenance
 conversant with instrument Air dryers operation and maintenance
 conversant with GE gas turbine maintenance overhauling, hot path
inspection, GCV,SRVand controlsystem,N2 Generator, Fire Water pumps.
 Manpower planning and estimation, and preparation of failure analysis
reports and recommendations to avoid recurrence,
 preparation of various progress reports, PM task reports and purchase
requisition for spares.
 Able to carry out technical evaluations of vendor offers, checking of vendor
drawings.
 Ability to use instrument calibration and Test equipments like, HART
communicator, FLUKE pressure calibrator ,Vibration test TK3, Multimeter,
frequency simulation Oscillator ………ets
 Ability to read drawings like P&ID, PFD, Logic Drawings, cause and affect
affect, installation hook ups, junction boxes, loop schemes & cable schedules
Electrical diagrams
 Ensure Spares balance and inventory and rise purchase requisite by using
MAXIMO 6.2
Period : Jan ‘2005 Till 2010
CONOCO PHILIPS Tabia gas plant.
Position: Instrument & Control Engineer
Responsible for:
 Follow up delay maintenance activates, preventive maintenance, break down,
shutdown maintenance as per the procedures and safety plan
 Conform the complement the maintenance and work environment with ISO
ISO 9001 – 2008,IEC and maintenance policy

3.  specifications for controlvalve, System Network , Control Panel,
Cabinet and Rack , Panel Specification , HSSD Specification
,Telecom cable Specification Instrumentation MCS, PSD, & ESD
System , Pressure Safety and Relief Valves…..ete
 Instrument Philosophies like Automation System Philosophy, Reset &
Override ,Fire and Gas Instrument Earthling Philosophy, Shutdown
Philosophy
 Documents Related To Automation System like Fire & Gas Cause / ESD
and Effect Chart MCS, PSD/ESD Instrument Cable Block Diagram MCS,
PSD/ESD, TCS. SIL ,instrument I/O .List of Test Equipments
 instrument Data sheet like control valve data sheet, ESD valves,
transmitters, T/K, RTD …..ete
 coordinate with other sections for major plant shutdown, follow up
shutdown critical path and annual shutdown planning.
 responsible for control systems DCS YOKOGAWACentum3000,
PLC ALLEN BRADELY , SCADA,TCS,F&G
 Personal Skills:
 Self-starter, motivated, communication skills, professional ,Good Problems-
solver, ,Adapting rapidly to changes in environment places and people
 Excellent team player with active network of other
 Self-confident in successfully handling the assigned tasks &responsibilities,
Plenty of drive, enthusiasm and motivation
 UAE driving license
Specific Tasks & Assignments involvement:
PMO:Preventive Maintenance Optimization. Development of revised
maintenance strategy with a focus on Pdm & CBM as future substitute of some
PM wherever applicable without compromising integrity and reliability of the
asset.
HSECES:HSE Critical Equipment & Systems. MAT incorporated in the JP as
per standards
.
PRM:Plant Resource Manager is a software toolthat works with production
control systems like CENTUM, CS-3000, Prosafe-RS and intelligent field
devices. PRM software linked with Maximo for continuous monitoring.
PST:Partial Stroke Test project implementation, and test with a running plant.

4. Safetycourses:
 Permit to work (PTW).
 Working safely and hazards elimination by IOSH.
 I worked Two years as HSE representative.
 Emergency response plan.
 Safe handling of chemical (SHOCH).
 Firefighting and Breathing apparatus
 Contribute in developing emergency response plan(ERP) for GASCO LTD
 Supervising safely by IOSH
 Conversant with operation Hazards study HAZOP
Technicalcourses:
 Bentley Nevada 3500 operation and maintenance by GENERAL
ELECTRIC GE
 DCS for maintenance.
 Electrical Equipment In Hazardous Areas & Classification
 GE Mark 6 (Turbine ControlSystem)
 HMI& controlpanel Maintenance PLC.
 Controller and control theory.
 Control valve and accessories.
 Fire, smoke and gas detection system.
 Certificate of attendance training courseof Training of Trainers by redar
uk.
 Critical instrument and control equipments competency by GASCO LTD
 Quality management System ISO 9001-2008
 Leadership Courses:
 Planning & Goal-Setting
 Leadership &personality at work
 Managing Professional Relationships
 CAS (Competency Assessorsystem) Training Course for local developees.
 Communication, Interpersonal & Team Building Skills.
 Project management and skills
 Self training for Skills of dealing with difficult people.
 Self training for strategic planning with critical success factories and future
scenarios

5. Languages skills
 Arabic as mother language and English fluently
Computer Experience:
 M.S Windows, ME and 2000, XP, Installation and setup programs.
 Familiar with M.S Office, including Word, Excel, Outlook, Access,
PowerPoint, Visio and Photoshop.
 IMMPOWER / MAXIMO: Central Maintenance Management System
(CMMS)
 C,C++ and visual basic programming
References
Abdelkader Attallah – GASCO – Maintenance Department head – Mobile No:
+971501457113
Abdel Qader Alshatri – GASCO – Section head – Mobile No: 00971504417297