Mohamed Omar Salih S.A.F. is seeking a career in electronics and instrumentation engineering where he can utilize his academic studies and abilities. He has a B.E. in Electronics and Instrumentation from MAM College of Engineering with projects in accident avoidance using PIR sensors and a smart ABC system for four wheelers using embedded systems. He has over 3 years of experience in construction, maintenance, and installing equipment for monitoring and controlling engineering systems.
5 years 3-month experience in the field of Instrumentation engineering in oil and gas, power sector’s involved engineering and in erection and commission of field instruments and controls panels like DCS DeltaV and SIS system.
Currently resident engineer in Gail India Limited Pata.
5 years 3-month experience in the field of Instrumentation engineering in oil and gas, power sector’s involved engineering and in erection and commission of field instruments and controls panels like DCS DeltaV and SIS system.
Currently resident engineer in Gail India Limited Pata.
I would like to submit my Application for the Post of MEP SUPERVISOR in your esteemed organization. This is for your kind consideration please.
May I introduce myself as Electrical Supervisor with a Diploma in Electrical Engineering from State Board of Technical Education – Bihar having an overall experience of 13 plus years in Heavy Industry, Hotel Buildings and Oil & gass fild Maintenance and commissioning Engineering.
EDUCATIONAL QUALIFICATION
Inter in Shri Mahendradas College,Mathia Nechuwa jalalpur Gopalganj 2000
Diploma in Electrical Engineering – Government Polytechnic Collage Gulzarbagh, Patna 2003
I would like to submit my Application for the Post of MEP SUPERVISOR in your esteemed organization. This is for your kind consideration please.
May I introduce myself as Electrical Supervisor with a Diploma in Electrical Engineering from State Board of Technical Education – Bihar having an overall experience of 13 plus years in Heavy Industry, Hotel Buildings and Oil & gass fild Maintenance and commissioning Engineering.
EDUCATIONAL QUALIFICATION
Inter in Shri Mahendradas College,Mathia Nechuwa jalalpur Gopalganj 2000
Diploma in Electrical Engineering – Government Polytechnic Collage Gulzarbagh, Patna 2003
SGLT2 Inhibitors v Sitagliptin (SITA) as Add-on Therapy to Metformin Chris Sevald, PhD
SGLT2 inhibitors are the latest class of FDA-approved oral therapies to lower blood glucose in type-2 diabetes.Systematic review and meta-analysis to compare glucose-lowering and weight-loss effects of SGLT2s vs. the most-prescribed DPP-4 inhibitor, SITA. Poster presented at the 21st annual meeting of ISPOR, May, 2016, in Washington DC.
A resourceful and accomplished individual with 3 years comprehensive experience in Electrical Engineering. Very effective in providing Project management, Estimation and Engineering Design support compliant to Department’s mission and procedures
1. Mohamed Omar Salih S.A.F.
E-mail: salih.omar91@gmail.com
Contactno:0091-9944368040
OBJECTIVE
Electronics and Instrumentation Engineering graduate, seeking a challenging career in
industry where my academic studies, abilities and personal skills can be utilized and
developed that make me distinct and multi qualified.
EDUCATIONAL BACKGROUND
B.E. (Electronics & Instrumentation) in MAM College Of Engineering, Anna
university, Chennai April 2012 passed with 64%.
HSC Central Higher Secondary School, Kayalpatnam March2008 passed with62.3%
SSLC Central Higher Secondary School, Kayalpatnam April 2006 passed with 81.8%
PROJECT UNDERTAKEN DURING UNDER GRADUATE COURSE
TITLE:
Mini project : Accident Avoider using PIR Sensor.
Final Year Project : Smart ABC System For Four Wheelers Using
Embedded Systems.
DESCRIPTION:
To replace the old system of each pedal for accelerator,
brake and clutch in four wheelers and also to reduce the tension by reducing the work
load to drivers at heavy traffic is the main moto of this system. Here accelerator, clutch
and brake will be connected in a single smart pedal and there is no any mechanical
linkage from the pedal to any system but there is a sensor to sense the movement of the
pedal and there will be a microcontroller to control any of the system which is
electrically connected to it and the device will be programmed in such a manner to
control all the accelerator, break, and clutch with the respective movement of the single
smart pedal. This will very much useful to reduce the confusions at tensed situations so
that we can reduce the accident rate and death rate, by using this smart pedal activating
clutch is very much simple, it reduces the complexity, and it is smart and simple.
CAREER SUMMARY:
Possess around three years of professional experience in Construction,
Maintenance and installing equipments formonitoring and controlling
engineering systems.
Erection& Commissioning of Instrumentation & Control devices in power plant,
Oil & Gas and water treatment Industry.
Having good knowledge in Preparation of Data Sheets, Instrument Index, Loop &
Termination Diagrams, Field Instruments and PLCControls.
Ability to troubleshoot, repair and maintain instruments and instrumentation
systems.
2. EXPERIENCE DETAILS:
COMPANY : DOOSAN HEAVY INDUSTRIES AND CONSTRUCTION(1.6years)
OWNER : SAUDI ELECTRICITY COMPANY(SEC).
SITE : RABIGH POWER PLANT-2,RABIGH.(4*700 MW)-SAUDI ARABIA.
POSITION : COMMISSIONING AND OPERATION ENGINEER.
ACTIVE ROLE : COMMISIONING ENGINEER.
DURATION : DEC 2013 TO MAY 2015.
DUTIES & RESPONSIBILITIES:
Commissioning Operation and Maintenance at Flue Gas Desulphurization(FGD)
process which is the process for removing sulphur from Flue Gas.
Commissioning of Field Instruments like Pressure Gauge, Transmitter etc.
Co-ordinate withClients fromSaudi Electricity Company for the proper running
of the projects.
Operation and Control process for all FGD equipments such as Oxidation Air
Blower, Absorber Spray Pumps, Gas-Gas Heater, FGD And BYPASS Flue Gas
Dampers, Sampling Pumps for checking and maintaining pH and DO value for
Sulphur mixed water.
Operating and Commissioned Damper Seal Air Fan, Seal Air Fan which are used
for sealing in Dampers and GGH to avoid flue gas leakage.
Controlling And Maintaining FGD inlet pressure by using HIGH PRESSURE
WATER MOTOR and SOOTBLOWING process for cleaning the GGH to reduce the
pressure in FGD system.
Conducted Internal Load Test and Function test in all FGD units.
Responsible for other activities assigned such as loop checking, tags and switch
gears.
Responsible for both HMI and LOCAL log sheets which gives perfect status of all
FGD equipments.
Inspecting all the local and HMI and preparation of punch list.
Having Knowledge in ESP local, Hydrogen Generation Plant, Water system and
SCR process.
Conducted ASH HANDLING and TRUCK UNLOADING of ASH from SILO.
Ensures the proper care and maintenance of all equipments and that proper
housekeeping is carried out in the field after commissioning.
Can study all the drawings such as P&ID, Instrument termination, Cable Schedule
at the time of Erection and supervise all the activities with my sub-ordinates as
per the company Safety Procedure.
3. PAST EXPERIENCE:
COMPANY : MICROMAX SYSTEMS PRIVATELIMITED,TRICHY.(1.5years)
SITE : FRANKLIN INSTRUMENTS, MANALI, CHENNAI.
POSITION : JUNIOR ENGINEER – INSTRUMENTATION.
DURATION : JULY 2012 TO NOV 2013.
DUTIES & RESPONSIBILITIES:
Can study all the drawings such as P&ID’s, Cable Schedule, Termination
Drawings and Installation.
Calibration of Pressure Transmitter, Temperature Transmitter, Level
Transmitter and Flow Transmitter by 375, 475 HART Protocol.
Calibration of Pressure Safety Valve (PSV), Temperature Safety Valve (TSV),
Control Valve.
Supervise all the activities like the Cable Laying, Glanding and Termination and
Instrument Installation for Instruments and Junction Box (JB) as per the client
Safety Procedure.
Good man-management skills with the workers.
Responsible for supervising and leading a team in field works.
Pre check all the Panel wirings are as per drawing.
Executing the job as per the approved constructiondrawings and QC
Procedures.
Supervise all the activities like Pneumatic and Impulse Tubing from Instruments.
Maintaining and Supervised all instruments in the field and loop checked if error
occurs.
TECHNICAL SKILLS
PLC & SCADA
Adobe Photoshop & MS Office
TRAININGS/INDUSTRIALVISITS UNDERGONE
WORKSHOP
Attended “I MAKE ROBOTS” in Valliammai college of engineering, Chennai.
TRAINING PROGRAM
Seven Days Short Term Training Program on “DCS and PLC” conducted
by Yokogawa in M.A.M college of engineering.
INDUSTRIAL VISIT
Visited “Thermal & Hydro Power Plant, Meetur”
Visited “TNPL, Karur”
4. ACHIEVEMENTS
Presented paper on “FUTURE CARS-C3 EVENT “ in National institute of
technology(NIT)-Trichy.
Got III prize for “MARKETING “conducted by IT department in M.A.M
College of engineering.
Got two Runner up Trophy for FOOTBALL events in Various Colleges.
Learned and trained about safety inside oil and gas and power plants.
KEY STRENGTHS
Problem solver.
Assertive listener and speaker.
Ability to lead a team.
Fast Learner.
Energetic Team Member.
Can Adopt To Any Situation.
Able to controland operation of any systems and equipment.
Able to determine the causes of operating errors.
Able to use scientific rules and methods to solve problems.
Able to manage tests and inspections of products.
PERSONAL PROFILE
Name : Mohamed Omar Salih S.A.F.
Date of Birth : 20/05/1991.
Father Name : Seyed Ahamed Fareed M.S.
Gender/Marital Status : Male / Single.
Nationality : Indian.
Passport Details
Passport No. : K8978258.
Place of issue : Madurai.
Expiry date : 01/01/2023.
Linguistic ability : English, Tamil, Arabic (R/W), Hindi (R/W),Malayalam.
Hobbies : Electronic Hobbies, Browsing, Reading Books, Playing Games.
Permanent address : #118/105, Solukar Street,
Kayalpattinam – 628204
Tuticorin District, Tamilnadu, INDIA.
DECLARATION
I hereby declare that the above stated information are true to the best of my knowledge.
DATE : SIGNATURE,
PLACE : (Mohamed Omar Salih S.A.F.)