I would like to submit my Application for the Post of MEP SUPERVISOR in your esteemed organization. This is for your kind consideration please.
May I introduce myself as Electrical Supervisor with a Diploma in Electrical Engineering from State Board of Technical Education – Bihar having an overall experience of 13 plus years in Heavy Industry, Hotel Buildings and Oil & gass fild Maintenance and commissioning Engineering.
EDUCATIONAL QUALIFICATION
Inter in Shri Mahendradas College,Mathia Nechuwa jalalpur Gopalganj 2000
Diploma in Electrical Engineering – Government Polytechnic Collage Gulzarbagh, Patna 2003
5 years 3-month experience in the field of Instrumentation engineering in oil and gas, power sector’s involved engineering and in erection and commission of field instruments and controls panels like DCS DeltaV and SIS system.
Currently resident engineer in Gail India Limited Pata.
I would like to submit my Application for the Post of MEP SUPERVISOR in your esteemed organization. This is for your kind consideration please.
May I introduce myself as Electrical Supervisor with a Diploma in Electrical Engineering from State Board of Technical Education – Bihar having an overall experience of 13 plus years in Heavy Industry, Hotel Buildings and Oil & gass fild Maintenance and commissioning Engineering.
EDUCATIONAL QUALIFICATION
Inter in Shri Mahendradas College,Mathia Nechuwa jalalpur Gopalganj 2000
Diploma in Electrical Engineering – Government Polytechnic Collage Gulzarbagh, Patna 2003
5 years 3-month experience in the field of Instrumentation engineering in oil and gas, power sector’s involved engineering and in erection and commission of field instruments and controls panels like DCS DeltaV and SIS system.
Currently resident engineer in Gail India Limited Pata.
To succeed in an environment of growth and excellence and earn a job which provides me satisfaction and self-development and help me achieve personal as well as organizational goals. Further to be involved in work where I can utilize my skills and positively contribute to the growth of the organization.
1. Page 1 of 3
SUNIL CHOUDARY. VANKA
Electrical Engineer
Mobile: 00971503261779 (Dubai)
Mobile: 0091998947781 (India)
E-mail: sunilchoudary247@yahoo.co.in,
sunilchoudary247@gmail.com,
Address: UAE Dubai
OBJECTIVE:
A professionally qualified Electrical Engineer with hands on experience, seeking a position
with a reputed organization where my education and experience will have valuable application.
SKILLS PROFILE:
Professionally qualified Electrical Engineer with over 11years of experience in electrical
engineering related assignments at senior level in India and UAE
Qualified with a Bachelor of Engineering (B.E.) in Electrical.
Hold a valid UAE Driving License for Light Vehicles.
Well versedin MS Office Applications & MAXIMO
Strong Analytical, Problem solving and decision making skills
Wide experience in handling electrical engineering relatedassignments in UAE.
Ability to develop innovative and practical design solutions to technical problems.
Have excellent knowledge & skills in electrical engineering concepts.
Well trainedin safety & security at work place.
Flexibility and openness in daily work and ability to adapt quickly and aptly to
changing strategies, procedures and methods.
Strongly commercial with excellent spoken & written communication and influencing
skills.
Energetic and capable of working with minimal support and a good deal of autonomy.
Can work under pressure and meet deadlines.
High level of perseverance and Time Management
EMPLOYMENT HISTORY
Electrical Engineer, Siemens (SDME.LLC) Dubai, UAE, Month April 29th - 2008- Present
Electrical Engineer, Alumeco India Extrusion Ltd, India, Month April 25th - 2007 – Month
April 27th - 2008
Electrical Engineer , Dr. Reddy Labs, India, Month April 30th - 2005 – Month April 24th -
2007
JOB PROFILE IN DUBAI, UAE: BHIS ENGINEER (SIEMENS)
Control all operations and maintenance activities in the respective area of BHS to
ensure Automation (PLC) system availability according to demand and Meet TargetedKPI in
respective area. Handel a team of 6 Supervisors and 50 Lead-/Technicians (electrical /
mechanical) and Maintenance/FiledOperators per shift to keepMaterial handling system
healthy.
Monitor BHS SCADA &CCTV and ensure the smooth operation of the system with the
close coordination of the clients and field Capable to handle logistics management
System and maintenance management systems.Knowledge about airport baggage
security systems such as HBS, EDS and CTX .Avoid delays of flights by ensuring
proper process of baggage in time
Monitoring staff attendance; arranging tool box talks & daily briefing, allocation and
reallocation of manpower to suit site requirements.
Effectively troubleshoot, test, repair, fault find and diagnose failures on PLC’S, field
devices & SCADA (Siemens S7 200, S7300, S7400 and Profibus networks).
2. Page 2 of 3
Supervising the BHS technical operation in perfect coordination with the end-user to
maximize efficiency and system availability. Attendall breakdowns and ensure smooth
and uninterruptedoperation of the syste m. Carry out on- site coordination during any
operational crisis and shall follow the defined escalation pattern and process flow
chart.
Supervising the execution of Operation and Maintenance work orders (Preventive,
corrective andbreakdown types). Ensure optimum utilization of man, materials and
tools at work. Ensure timely completion of the work in a safe manner, monitor quality
of work, accuracy of all information etc.
Updating Maintenance History CMMS/cards of all equipments of BHS. Assist the O&M
Engineer in preparation of daily operation / maintenance reports of the shift
Ensuring SOP’S followed by staff always & maintaining a clean & safe work area
during and after the maintenance. Report near misses, accidents / incidents to
Engineer/ Manager Operation and Maintenance.
Responsible for testing &Inspecting Profibus communication between Master and slave
protocol.
Making Regular inspection Report on S7 300 plc based cubical bus Main Distribution
panels.
Monitoring and Reporting Profibus signal level of FDB, SMDB panels using Profit race.
Commissioning, Inspection and testing of Micro master 440 drives based Transporting
Unit
Installing and testing Sinamics G120D, MM411 drive based high speed transporting
unit.
Responsible for slave (et200s, ECOFAST &ET200 ECO, ASI) expansion under Profibus
DP master system.
Responsible for establishing, implementing and maintaining the quality management
system.
Create and maintain company quality documentation, such as quality manuals.
Quality Procedures, specifically for MCB, MCCB & ACB products.
Root cause analysis and implementation of corrective action for process related
concerns.Plan and estimate electrical jobs.
Assist contractors on jobs. Responds to emergency situations as necessary.
As a part of my duty services in areas of validation equipment in MDP, SMDB, FDB,
FRB and UPS , ESB ,ESCB ,FRDP panels.
Working on Field equipment:
PLCS7, ECOFAST, MICROMASTER, PROXIMITY SENSORS, DRIVES, LIGHT
CURTONS, PHOTOCELLS, SONAR SENSORS, ATR, READ AND WRITE STATIONS.
Improvements Done On BHS System:
Worked on FRB Panel and made one electrical circuit to protect the fire shutter from
over run.
Prepared the step over logic and set up.
JOB PROFILE IN INDIA: (DR.Reddys Labs & Alumeco)
Worked on PLC operation on hydraulic presses, billet cutters, billet heaters, pullers and
carriedout electrical maintenance works on motors generators and electrical panel.
Preparing maintenance schedule for electrical works.
Preparing all necessary documents for audits.
Identify areas of quality failures and take steps to rectify the system.
Proactively identifying areas of obstruction / breakdowns.
Increase machine up time andequipment reliability
Planning and effecting preventive maintenance schedules of various machineries and
instruments to increase machine uptime and equipment reliability.
Proactively identifying areas of obstruction / breakdowns and take steps to rectify the
equipments through application of trouble shooting tools.
Responsible for getting the renewal of FDA and ISO audits for the plant and
maintaining all requisite documents relatedto electrical and instrumentation.
3. Page 3 of 3
Ensuring compliance of various quality measures such as 5S, Quality circles &
imparting training to all operators.
Identify areas of quality failures and take steps to rectify the system.
Complete Knowledge in polmon data logging system.
Service, maintenance andcalibration of Limit switches, sensors, transmitters,
Indicators & scanners of temperature, flow, pressure & level.
Maintenance of PCC & MCC panels, Maintenance of Induction motors & switch gear of
different ratings.
Ensuring compliance of various quality measures such as 5S, Quality Circles &
imparting training to all operators. (Sort, straighten, shine, standardize, sustain).
Preparing records and documents of calibrated equipment.
Maintain the maintenance records.
EDUCATIONAL QUALIFICATIONS:
Bachelor of Engineering (Electrical), Vision Tech of Engineering, India 2011 -2014
D.E.E.E (Diploma in Electrical & Electronics Engineering), COL D. S. RAJU
POLYTECHNIC 2002 -2005
COMPUTER SKILLS:
MAXIMO and MS Office Applications
STRENGTHS:
Good team player and leader
Completes the targets and commitments within stipulatedtime
Adapting to the situation
Staunch believer of god and ethics
Service to mankind
Good in inter personnel relations
Asset to my boss
Good communication skill.
IDENTIFICATION:
Passport no. : G2090887
Driving license UAE NO : 1857372
Driving license INDIA NO : DLFAP029382182007
PERSONAL PROFILE:
Date of Birth : 18-04-1986
Nationality : Indian
Visa Status : Employment
Languages : Telugu, Hindi, English
Father : Sundar rao vanka
Mother : Murali Krishna vanka
Brother : Anil choudary vanka
Permanent Address
Plot no- 42 to 75, Seeligallas Enclave, near hanuman temple, Bandari layout, Nizampet
Village, Hyderabad-500090 A.P, INDIA.
DECLARATION: I hereby declare that all the information provided by me true
Date: Yours Faithfully,
Place:Dubai V.SUNILCHOUDARY.