MOBILE MONITORNG SYSTEM FOR SMART HOMES
โขDownload as PPTX, PDFโข
1 likeโข636 views
This project report describes a mobile monitoring system for smart homes using an ARM7 microcontroller. The system uses a PIR sensor to detect unauthorized persons and trigger loads like lights and fans to turn on. It sends notifications to a mobile phone using GSM. The hardware requirements include an LPC2148 microcontroller, GSM module, relays, loads, LCD, and PIR sensor. The software used is Embedded C, Keil, and Proteus. Benefits are remote access, low power, and increased security and control of home systems. Potential applications include security systems, home automation, and access control.
Report
Share
Report
Share
Recommended
Embedded based home security system
This document describes an AT89S52-based home security system that uses an IR sensor and GSM module. It detects intrusions and sends SMS messages to notify users. The system uses an AT89S52 microcontroller for processing, a GSM module for communication, an IR sensor for detection, and an LCD for display. When the IR sensor detects an obstacle, it sends a command to the microcontroller, which then sends an SMS alert via the GSM module. The system offers advantages like easy installation, worldwide access, and low cost, with potential disadvantages related to range and safety.
A1 Presentation
This document describes a microcontroller-based intelligent home security system using wireless sensor networks and GSM. The system detects intruders using infrared, temperature, and light sensors and alerts the homeowner via text message if any sensors are triggered. It uses an AT89S52 microcontroller to process sensor data and an attached GSM module to send notifications. The system is designed to provide low-cost home security and real-time intruder alerts.
Gsm based home automation using avr
This document provides a project definition for a GSM based home automation system using an AVR microcontroller. The system will allow controlling home appliances like AC and DC devices via phone calls by pressing buttons on the phone that generate DTMF tones, which are decoded by the microcontroller. The microcontroller is an ATmega16 that will be programmed in C language. It will interface with a DTMF decoder, relay modules, and L293D motor driver. The software tools used will include a compiler for the microcontroller, serial downloading software, and Windows XP as the operating system.
Project on gsm based mobile controlling robot
This project uses mobile technology and since mobile has very large range, the project also has very large range. But finally it depends on the coverage of the mobile network.
Automated system for fault analysis in industries using
Automated system for fault analysis in industries using GSM.
By using this kind of project In industries we can reduce the man power for continuous operation the accuracy of the work will be more and also there will be less chances of damaging the devices.
Gsm controlled robot abstract
This document describes a GSM controlled robot that can be operated from anywhere using a mobile phone. The robot uses an Atmega8 microcontroller and transmits live video over the internet with no range limit for control. Potential applications include remote surveillance, security monitoring, rescue operations, and medical observation.
gsm based security system
suppose this security system is fitted in your car . If a thief breaks in and tries to drive away your car then he/she have enter the code for ignition .If the code mismatches then it will send a message to the proprietor's cell "security breach".By this we will come to know that someone is trying to steal your car.
"THAT IS THE IDEA OF THE PROJECT"
SECURED WIRELESS COMMUNICATION FOR INDUSTRIAL AUTOMATION AND CONTROL BY USING...
SECURED WIRELESS COMMUNICATION FOR INDUSTRIAL AUTOMATION AND CONTROL BY USING...JOLLUSUDARSHANREDDY
This document describes a technical project on secured wireless communication for industrial automation and control using GSM. The main components discussed are an ARM7 controller, GSM modem, LCD, relays, motor and load. The system allows automatic control of electrical appliances in industry via SMS received from a user's mobile phone by the GSM modem and processed by the ARM7 controller. It has applications in homes, hospitals, banks and other areas. Advantages include low cost and simple design while disadvantages are potential high phone bills if used frequently and failure of the GSM modem.ย
Recommended
Embedded based home security system
This document describes an AT89S52-based home security system that uses an IR sensor and GSM module. It detects intrusions and sends SMS messages to notify users. The system uses an AT89S52 microcontroller for processing, a GSM module for communication, an IR sensor for detection, and an LCD for display. When the IR sensor detects an obstacle, it sends a command to the microcontroller, which then sends an SMS alert via the GSM module. The system offers advantages like easy installation, worldwide access, and low cost, with potential disadvantages related to range and safety.
A1 Presentation
This document describes a microcontroller-based intelligent home security system using wireless sensor networks and GSM. The system detects intruders using infrared, temperature, and light sensors and alerts the homeowner via text message if any sensors are triggered. It uses an AT89S52 microcontroller to process sensor data and an attached GSM module to send notifications. The system is designed to provide low-cost home security and real-time intruder alerts.
Gsm based home automation using avr
This document provides a project definition for a GSM based home automation system using an AVR microcontroller. The system will allow controlling home appliances like AC and DC devices via phone calls by pressing buttons on the phone that generate DTMF tones, which are decoded by the microcontroller. The microcontroller is an ATmega16 that will be programmed in C language. It will interface with a DTMF decoder, relay modules, and L293D motor driver. The software tools used will include a compiler for the microcontroller, serial downloading software, and Windows XP as the operating system.
Project on gsm based mobile controlling robot
This project uses mobile technology and since mobile has very large range, the project also has very large range. But finally it depends on the coverage of the mobile network.
Automated system for fault analysis in industries using
Automated system for fault analysis in industries using GSM.
By using this kind of project In industries we can reduce the man power for continuous operation the accuracy of the work will be more and also there will be less chances of damaging the devices.
Gsm controlled robot abstract
This document describes a GSM controlled robot that can be operated from anywhere using a mobile phone. The robot uses an Atmega8 microcontroller and transmits live video over the internet with no range limit for control. Potential applications include remote surveillance, security monitoring, rescue operations, and medical observation.
gsm based security system
suppose this security system is fitted in your car . If a thief breaks in and tries to drive away your car then he/she have enter the code for ignition .If the code mismatches then it will send a message to the proprietor's cell "security breach".By this we will come to know that someone is trying to steal your car.
"THAT IS THE IDEA OF THE PROJECT"
SECURED WIRELESS COMMUNICATION FOR INDUSTRIAL AUTOMATION AND CONTROL BY USING...
SECURED WIRELESS COMMUNICATION FOR INDUSTRIAL AUTOMATION AND CONTROL BY USING...JOLLUSUDARSHANREDDY
This document describes a technical project on secured wireless communication for industrial automation and control using GSM. The main components discussed are an ARM7 controller, GSM modem, LCD, relays, motor and load. The system allows automatic control of electrical appliances in industry via SMS received from a user's mobile phone by the GSM modem and processed by the ARM7 controller. It has applications in homes, hospitals, banks and other areas. Advantages include low cost and simple design while disadvantages are potential high phone bills if used frequently and failure of the GSM modem.ย
Gsm based home automation
This presentation is based on the controlling of home appliances using simple commands. The key components are a SIM 300 GSM module, an Arduino UNO board and a 4 channel 12 volt relay.
Ppt
This document describes a remote home security system using a wireless sensor network and GSM technology. The system aims to detect theft, gas leaks, and temperature changes and send alarm messages remotely. It uses an ARM or AT89S52 controller, GSM module, smoke sensor, LPG sensor, temperature/PIR sensor, infrared sensor, LCD, and MAX232 IC. The system's block diagram shows sensors connecting to an embedded controller that communicates via GSM to authorized mobile phones. It allows monitoring a home security system remotely.
Wireless home security system
Wireless home security systems provide protection from intruders, burglars, and fire or water damage. They include cameras, motion detectors, and alarms to detect and alert homeowners to threats. Many companies offer wireless systems for installation or self-installation, with options for 24/7 professional monitoring to ensure homeowner safety.
Gsm based home automation ppt
This document describes a home appliance control system based on GSM network technology. The system allows users to remotely control and monitor home appliances and security via SMS messages sent from their mobile device to a GSM modem connected to a PC system in the home. When intrusions are detected by the system, such as at the main gate, entrance door, or windows, an SMS alert is generated and sent to the user's mobile phone. The GSM-based system provides an affordable way to remotely control home automation and security compared to previous methods. Future improvements could integrate the PC and GSM modem into a single enclosed device with its own UPS and charging system.
INDUSTRIAL SECURITY SYSTEM PROJECTS ABSTRACT:Industrial safety measures syste...
This document describes an industrial security system that uses sensors and artificial intelligence. The system monitors for smoke, vibrations, glass breaking, and detects intruders using a web camera. It also tracks employee attendance and detects door tampering, metal objects, and gas leaks. The system aims to provide complete security for industries and other facilities through advanced sensors connected to a PIC microcontroller and centralized computer. It can provide security for various sites without human intervention through its built-in alarms, voice indications, and ability to identify security issues.
Gsm based home(ppt)
This document provides an overview of a project to create a home automation system using GSM technology. The system would allow users to control home appliances via SMS from their mobile phone. It discusses the motivation, objectives, basic working, components, costs, timeline, and pros and cons of the system. The objectives are to enable remote control of appliances without being physically present and reduce power and time wastage. The estimated cost is 3,814 Rs. and the timeline outlines tasks from feasibility to testing over 6 months.
Cell Phone Operated Robot for Search and Research of an Object
Slide presented in 2013 10th International Conference on Wireless and Optical Communications Networks, IEEE Conference.
In this robot, an IR sensor detects an object robotโs arms pick up the object and keep in the carriage box this robot move with the help of cell phone by using DTMF technology, from arm the object is tested whether object is metallic or not, the operator get alert through SMS of object and its characteristics by using GSM technology.
Pir and gsm based house security system
This document describes a PIR and GSM based home security system. The system uses a sensor to detect intruders and notifies the homeowner through an alarm and SMS message. It continuously monitors the sensor status and automatically sends SMS alerts to the user if the sensor is triggered. The system aims to provide security for homes, banks, and companies through detection and remote notification capabilities.
Home automation and Digital notice board using android app
This document describes a home automation system using an LPC2148 microcontroller, GSM modem, relays, and an Android application. The system allows users to control appliances and view a digital notice board remotely using the Android app via GSM. The LPC2148 microcontroller interfaces with the GSM modem to receive control messages and trigger relays to operate appliances. The system provides a low-cost, flexible, and secure remote automation solution.
INDUSTRIAL AUTOMATION AND SECURITY SYSTEM BASED ON
This document describes an industrial automation and security system based on GSM. It uses an 8051 microcontroller, GSM modem, LCD display, fire detector, IR transmitter and receiver. The system allows remote operation and monitoring of industrial equipment via SMS commands to the GSM modem. It also provides security features like fire detection and door access control using infrared sensors. The system aims to reduce production costs through automation while improving security.
smart Home security
This document describes a smart home security system that uses wireless sensor networks and GSM technology. The system can detect theft, gas leaks, temperature changes and send alarm messages to a mobile phone. It allows users to control home appliances like fans and lights remotely. The system uses low-cost and commonly available components like cell phones, SIM cards, and GSM modems. Sensors for smoke, LPG, temperature, and motion can trigger alarm messages. The system has applications for home, locker, industrial and bank security.
Group-3
This presentation summarizes a student project on developing a home automation and security system using GSM technology. It was prepared by three students for their department supervisor. The presentation outlines the objectives, which are to develop a wireless home automation system using GSM to remotely monitor and control devices. It describes the basic working of the system with a microcontroller receiving SMS commands from a mobile phone to operate devices. The hardware and software components used are also summarized, along with the advantages of flexibility, security and power savings enabled by the remote control functionality.
Major
This document summarizes a student project to build a touch-tone telephone robot. It includes sections describing the components used like resistors, capacitors, oscillators, ICs, and a microcontroller. Software tools like ExpressPCB and Keil were used. Potential applications are in scientific, military, and search and rescue operations. The future could include adding a camera, IR sensors, password protection, or an alarm phone dialer. The conclusion is that the project will be beneficial for various purposes.
Home automation & security system
The Home Automation & Security system is a basic model created using Arduino, Raspberry Pi and Relays to Automate the house. It is very basic in nature and is completed as a part of my internship project
Keypad Based Bank Locker Security System Using Gsm Technology
Banking is one of the sectors where technology and advancements in technologies have not been utilized to the fullest potential. In the security systems even today very old practices are followed that can be made lot better using technologies like GSM which is easily usable and also easy to implement at a consumer level. In this project we propose a GSM based secure access which can provide a sophisticated theft alert system for bank locker system. This system contains microcontroller, keypad, GSM module and LCD display. By using keypad we need to enter the password that is provided to the authenticated persons. If the password entered is wrong then the GSM network converts the digital information into airborne signals and SMS is transferred to the registered mobile number. This system offers better solution for the bank security system and it will also help us to track the person who tried to open the locker without the permission and proper authentication.
Dtmf based device control
This document describes a system to control devices wirelessly using DTMF technology. An 8051 microcontroller is interfaced with relays and loads to control industrial or home devices. A mobile phone acts as a remote control by establishing a call and pressing keys that generate DTMF tones detected by a decoder. The keys are mapped to control the relays and devices. A power supply regulates voltage for the system. Applications include industrial and domestic device control from a mobile phone remotely.
Mobile control robot
Presentation on mobile control robot using DTMF (Dual tone multi frequency). Here microcontroller is used with a motor driver to move the robot.
Monitoring & Controlling of Devices using GSM
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a microcontroller to receive SMS commands from a mobile phone via a GSM modem and control devices connected to relays. It allows devices like fans and lamps to be turned on and off from a distance. The system provides advantages like remote control from anywhere using basic phone operation and potential applications in home, office, and industrial automation.
Industrial automation using gsm (ppt)
This document proposes a GSM-based industrial automation system that uses a PSoC microcontroller to monitor and control industrial devices via SMS commands sent from a mobile phone. Sensors detect process variables and relay switches control devices. The GSM modem provides wireless communication between the system and maintenance officers who can remotely monitor sensors and control machinery from anywhere using their mobile phones. This low-cost solution aims to reduce maintenance costs and optimize critical monitoring compared to existing wired, wireless, and RF-based systems.
gsm based home automation
The document describes a home appliance control system based on GSM network technology that allows users to remotely control appliances via SMS. A microcontroller receives SMS commands and uses a relay circuit to operate appliances. Key advantages are ubiquitous access, wireless operation for adaptability and cost-effectiveness, and power conservation. Limitations include the receiver needing a constant power supply and cellular signal to operate connected devices.
Electronics ,E&TC final Year Embedded Projects
Embedded Systems Projects, Final Year electronics , E&TC Engineering projects, Embedded Systems project guidance,Micro Controller Projects, ARM7 Projects, Zigbee Projects, Robotics Projects
border security using gsm
This document describes a border security and alert system using GSM technology. The system uses an LPC2148 microcontroller interfaced with IR sensors, a GSM modem, buzzer, and LCD to detect intruders and alert authorized personnel via text message. When an IR sensor detects an object at the border, the microcontroller sends an SMS via the GSM modem. The system provides low-cost border security automation and real-time intruder alerts to remote users through standard mobile networks and devices. Potential applications include defense, banking security, and museum protection.
More Related Content
What's hot
Gsm based home automation
This presentation is based on the controlling of home appliances using simple commands. The key components are a SIM 300 GSM module, an Arduino UNO board and a 4 channel 12 volt relay.
Ppt
This document describes a remote home security system using a wireless sensor network and GSM technology. The system aims to detect theft, gas leaks, and temperature changes and send alarm messages remotely. It uses an ARM or AT89S52 controller, GSM module, smoke sensor, LPG sensor, temperature/PIR sensor, infrared sensor, LCD, and MAX232 IC. The system's block diagram shows sensors connecting to an embedded controller that communicates via GSM to authorized mobile phones. It allows monitoring a home security system remotely.
Wireless home security system
Wireless home security systems provide protection from intruders, burglars, and fire or water damage. They include cameras, motion detectors, and alarms to detect and alert homeowners to threats. Many companies offer wireless systems for installation or self-installation, with options for 24/7 professional monitoring to ensure homeowner safety.
Gsm based home automation ppt
This document describes a home appliance control system based on GSM network technology. The system allows users to remotely control and monitor home appliances and security via SMS messages sent from their mobile device to a GSM modem connected to a PC system in the home. When intrusions are detected by the system, such as at the main gate, entrance door, or windows, an SMS alert is generated and sent to the user's mobile phone. The GSM-based system provides an affordable way to remotely control home automation and security compared to previous methods. Future improvements could integrate the PC and GSM modem into a single enclosed device with its own UPS and charging system.
INDUSTRIAL SECURITY SYSTEM PROJECTS ABSTRACT:Industrial safety measures syste...
This document describes an industrial security system that uses sensors and artificial intelligence. The system monitors for smoke, vibrations, glass breaking, and detects intruders using a web camera. It also tracks employee attendance and detects door tampering, metal objects, and gas leaks. The system aims to provide complete security for industries and other facilities through advanced sensors connected to a PIC microcontroller and centralized computer. It can provide security for various sites without human intervention through its built-in alarms, voice indications, and ability to identify security issues.
Gsm based home(ppt)
This document provides an overview of a project to create a home automation system using GSM technology. The system would allow users to control home appliances via SMS from their mobile phone. It discusses the motivation, objectives, basic working, components, costs, timeline, and pros and cons of the system. The objectives are to enable remote control of appliances without being physically present and reduce power and time wastage. The estimated cost is 3,814 Rs. and the timeline outlines tasks from feasibility to testing over 6 months.
Cell Phone Operated Robot for Search and Research of an Object
Slide presented in 2013 10th International Conference on Wireless and Optical Communications Networks, IEEE Conference.
In this robot, an IR sensor detects an object robotโs arms pick up the object and keep in the carriage box this robot move with the help of cell phone by using DTMF technology, from arm the object is tested whether object is metallic or not, the operator get alert through SMS of object and its characteristics by using GSM technology.
Pir and gsm based house security system
This document describes a PIR and GSM based home security system. The system uses a sensor to detect intruders and notifies the homeowner through an alarm and SMS message. It continuously monitors the sensor status and automatically sends SMS alerts to the user if the sensor is triggered. The system aims to provide security for homes, banks, and companies through detection and remote notification capabilities.
Home automation and Digital notice board using android app
This document describes a home automation system using an LPC2148 microcontroller, GSM modem, relays, and an Android application. The system allows users to control appliances and view a digital notice board remotely using the Android app via GSM. The LPC2148 microcontroller interfaces with the GSM modem to receive control messages and trigger relays to operate appliances. The system provides a low-cost, flexible, and secure remote automation solution.
INDUSTRIAL AUTOMATION AND SECURITY SYSTEM BASED ON
This document describes an industrial automation and security system based on GSM. It uses an 8051 microcontroller, GSM modem, LCD display, fire detector, IR transmitter and receiver. The system allows remote operation and monitoring of industrial equipment via SMS commands to the GSM modem. It also provides security features like fire detection and door access control using infrared sensors. The system aims to reduce production costs through automation while improving security.
smart Home security
This document describes a smart home security system that uses wireless sensor networks and GSM technology. The system can detect theft, gas leaks, temperature changes and send alarm messages to a mobile phone. It allows users to control home appliances like fans and lights remotely. The system uses low-cost and commonly available components like cell phones, SIM cards, and GSM modems. Sensors for smoke, LPG, temperature, and motion can trigger alarm messages. The system has applications for home, locker, industrial and bank security.
Group-3
This presentation summarizes a student project on developing a home automation and security system using GSM technology. It was prepared by three students for their department supervisor. The presentation outlines the objectives, which are to develop a wireless home automation system using GSM to remotely monitor and control devices. It describes the basic working of the system with a microcontroller receiving SMS commands from a mobile phone to operate devices. The hardware and software components used are also summarized, along with the advantages of flexibility, security and power savings enabled by the remote control functionality.
Major
This document summarizes a student project to build a touch-tone telephone robot. It includes sections describing the components used like resistors, capacitors, oscillators, ICs, and a microcontroller. Software tools like ExpressPCB and Keil were used. Potential applications are in scientific, military, and search and rescue operations. The future could include adding a camera, IR sensors, password protection, or an alarm phone dialer. The conclusion is that the project will be beneficial for various purposes.
Home automation & security system
The Home Automation & Security system is a basic model created using Arduino, Raspberry Pi and Relays to Automate the house. It is very basic in nature and is completed as a part of my internship project
Keypad Based Bank Locker Security System Using Gsm Technology
Banking is one of the sectors where technology and advancements in technologies have not been utilized to the fullest potential. In the security systems even today very old practices are followed that can be made lot better using technologies like GSM which is easily usable and also easy to implement at a consumer level. In this project we propose a GSM based secure access which can provide a sophisticated theft alert system for bank locker system. This system contains microcontroller, keypad, GSM module and LCD display. By using keypad we need to enter the password that is provided to the authenticated persons. If the password entered is wrong then the GSM network converts the digital information into airborne signals and SMS is transferred to the registered mobile number. This system offers better solution for the bank security system and it will also help us to track the person who tried to open the locker without the permission and proper authentication.
Dtmf based device control
This document describes a system to control devices wirelessly using DTMF technology. An 8051 microcontroller is interfaced with relays and loads to control industrial or home devices. A mobile phone acts as a remote control by establishing a call and pressing keys that generate DTMF tones detected by a decoder. The keys are mapped to control the relays and devices. A power supply regulates voltage for the system. Applications include industrial and domestic device control from a mobile phone remotely.
Mobile control robot
Presentation on mobile control robot using DTMF (Dual tone multi frequency). Here microcontroller is used with a motor driver to move the robot.
Monitoring & Controlling of Devices using GSM
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a microcontroller to receive SMS commands from a mobile phone via a GSM modem and control devices connected to relays. It allows devices like fans and lamps to be turned on and off from a distance. The system provides advantages like remote control from anywhere using basic phone operation and potential applications in home, office, and industrial automation.
Industrial automation using gsm (ppt)
This document proposes a GSM-based industrial automation system that uses a PSoC microcontroller to monitor and control industrial devices via SMS commands sent from a mobile phone. Sensors detect process variables and relay switches control devices. The GSM modem provides wireless communication between the system and maintenance officers who can remotely monitor sensors and control machinery from anywhere using their mobile phones. This low-cost solution aims to reduce maintenance costs and optimize critical monitoring compared to existing wired, wireless, and RF-based systems.
gsm based home automation
The document describes a home appliance control system based on GSM network technology that allows users to remotely control appliances via SMS. A microcontroller receives SMS commands and uses a relay circuit to operate appliances. Key advantages are ubiquitous access, wireless operation for adaptability and cost-effectiveness, and power conservation. Limitations include the receiver needing a constant power supply and cellular signal to operate connected devices.
What's hot (20)
INDUSTRIAL SECURITY SYSTEM PROJECTS ABSTRACT:Industrial safety measures syste...
INDUSTRIAL SECURITY SYSTEM PROJECTS ABSTRACT:Industrial safety measures syste...
ย
Cell Phone Operated Robot for Search and Research of an Object
Cell Phone Operated Robot for Search and Research of an Object
ย
Home automation and Digital notice board using android app
Home automation and Digital notice board using android app
ย
INDUSTRIAL AUTOMATION AND SECURITY SYSTEM BASED ON
INDUSTRIAL AUTOMATION AND SECURITY SYSTEM BASED ON
ย
Keypad Based Bank Locker Security System Using Gsm Technology
Keypad Based Bank Locker Security System Using Gsm Technology
ย
Viewers also liked
Electronics ,E&TC final Year Embedded Projects
Embedded Systems Projects, Final Year electronics , E&TC Engineering projects, Embedded Systems project guidance,Micro Controller Projects, ARM7 Projects, Zigbee Projects, Robotics Projects
border security using gsm
This document describes a border security and alert system using GSM technology. The system uses an LPC2148 microcontroller interfaced with IR sensors, a GSM modem, buzzer, and LCD to detect intruders and alert authorized personnel via text message. When an IR sensor detects an object at the border, the microcontroller sends an SMS via the GSM modem. The system provides low-cost border security automation and real-time intruder alerts to remote users through standard mobile networks and devices. Potential applications include defense, banking security, and museum protection.
ARM7TDM
The document describes the ARM7TDMI processor core. It is a 32-bit RISC processor capable of executing 16-bit Thumb instructions. It features a JTAG debugging interface, multiplier, and support for embedded emulation. It has a three-stage pipeline and interfaces with memory using different bus cycles.
Spi in arm7(lpc2148)
its only for learning purpose for beginners who wants to understand this protocol.
Life is all about learning, hope u will enjoy in this my PPT.
for any suggestion your always welcome .
Security system using Arduino
The objective of this project is to design and develop a wireless communication link to monitor our organizations that require high security like Banks , Offices etc.
Arm cortex ( lpc 2148 ) based motor speed control
The project is designed to control the speed of a DC and AC motor using an ARM7 LPC2148 processor. The speed of motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then speed can also be varied. This project uses the above principle to control the speed of the motor by varying the duty cycle of the pulses applied to it, popularly known as PWM control. The project uses input button interfaced to the processor, which are used to control the speed of motor. Pulse Width Modulation is generated at the output by the microcontroller as per the program. The program is written in Embedded C.
The average voltage given or the average current flowing through the motor will change depending on the duty cycle, ON and OFF time of the pulses, so the speed of the motor will change. A motor driver IC is interfaced to the ARM7 LPC2148 processor board for receiving PWM signals and delivering desired output for speed control. Further the project can be enhanced by using power electronic devices such as IGBTs to achieve speed control higher capacity industrial motors.
Vehicle tracking Using GPS,GSM & ARM7
This document is a project report on a vehicle tracking system using GSM, GPS and an ARM7 microcontroller. It consists of an introduction describing typical vehicle tracking systems and their components. It then discusses the hardware components involved including the GPS, GSM and ARM7 microcontroller. It also covers the working principles of these hardware components and interfaces such as RS232. The document outlines the overall working of the vehicle tracking system, software used for programming the microcontroller, and applications of such a system.
Border security using wireless integrated network sensors(wins)
Wireless integrated network sensors (WINS) can now monitor national borders by detecting intruders. The border area is divided into nodes that communicate with each other and a main node. Sensors detect footstep noises which are converted into power spectral densities and compared to reference values. WINS require little power and produce less delay than other security systems like radar, allowing reasonably fast detection of targets along borders and enabling global environmental monitoring through distributed land, water, and air sensors.
Gsm based home automation
This document describes a GSM based home automation system using DTMF signals. It involves a DTMF decoder, microcontroller, and relays. The system allows controlling electrical devices via mobile phone by sending DTMF tones. When a button on the phone is pressed, the corresponding DTMF tone is decoded by the microcontroller. The microcontroller then activates the necessary relays to control the electrical loads. This allows remote control of appliances and robots through the mobile phone network without needing a separate remote controller.
GSM BASED DEVICES CONTROL SYSTEM PROJECT REPORT
The document is a project report for an SMS based device control system using GSM technology. It was submitted by 5 students for their Bachelor of Technology degree. The project involved designing a printed circuit board to control devices remotely via SMS using a GSM modem and microcontroller. The report describes the equipment used, including the GSM modem, microcontroller, LCD display, relays, and driver IC. It also covers the PCB design and layout, programming code, working of the system, advantages and applications.
Viewers also liked (10)
Arm cortex ( lpc 2148 ) based motor speed control
Arm cortex ( lpc 2148 ) based motor speed control
ย
Border security using wireless integrated network sensors(wins)
Border security using wireless integrated network sensors(wins)
ย
Similar to MOBILE MONITORNG SYSTEM FOR SMART HOMES
J04701080085
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
GSM Based Security System
This document describes the design and implementation of a GSM alarm system. The system uses an Arduino board connected to a GSM shield to detect motion via a PIR sensor and send SMS alerts. It includes a keypad for input, LCD display for status, and buzzer for alarms. Programming was done in C++ using the Arduino IDE. The system aims to provide remote security monitoring via GSM connectivity even when the owner is away. Some challenges included delays receiving hardware and issues with the GSM functionality during testing. Overall the project demonstrated a working GSM alarm prototype.
ATM USER ACCOUNT SECURE BY USING GSM TECHNOLOGY
The aim of our project to reduce the amount thefting& hacking through ATM.
Now a days there is no secure for money.
REAL TIME FACE DETECTING UNAUTHORIZED HUMAN MOVEMENT USING ESP 32 CAM MODULE
This document describes a real-time face detection system using an ESP 32 CAM module to detect unauthorized human movement and provide security. The system uses a PIR motion sensor to detect movement, the ESP 32 CAM module to capture images with its in-built camera, and sends the images to an Android device via a Blynk app. It also controls an electric mini lock using a relay connected to the ESP 32 CAM module. The system is programmed in Python and detects movement, captures images, sends notifications to alert the owner, and can control the lock based on commands sent through the Blynk app. The goal is to provide security and automation for homes and businesses using computer vision and IoT technologies.
Gsm based bank vault security system
This document proposes a GSM-based security system for bank vaults using sensors and a microcontroller. It would detect intrusions using four sensors and a motion detector connected to an Arduino board. When a sensor is triggered, the Arduino would send an SMS alert via a GSM module. The system aims to provide low-cost, reliable remote monitoring of bank vault areas even when managers are absent. It compares the proposed system to traditional approaches and outlines the working mechanism in block diagrams and flowcharts. Potential advantages include automation and cost-effectiveness, while limitations involve sensor specificity and power requirements.
Smart and Secure Home using IoT
1. The document describes a smart and secure home system using IoT that allows users to control home appliances like AC and washing machines remotely through an internet connection from anywhere in the world.
2. The system uses an Arduino Mega board connected to sensors and a GSM modem to monitor temperature and motion in the home. If thresholds are exceeded, the system sends SMS alerts to users. It can also control appliances through relays.
3. The system includes a fire emergency system that uses a temperature sensor to detect fires and alert users through SMS, as well as a security system using a PIR motion sensor to detect intruders and notify users. This allows remote monitoring and control of the home while providing
Advanced Automation System in Industrial Applications Using PIC Microcontrol...
The main aim of this paper is to design and develop an advanced automation system in the
industries. In this technique we are using the GSM modem which have the SIM card present in it, the
user can send message on the 10 digit SIM number using the cell phone from any part of the world. The
micro controller is programmed using the embedded C. when the user will send the message to a
particular device that particular device will be on or we can also off the device. Example if the motor is
in over voltage, under voltage, over current in that time the microcontroller will trip the circuit and give
the message feedback to the user. The micro controller will read the temp from the sensor and it will
display the same on the LCD when the incoming temp crosses the set limit the micro controller will turn
OFF the device and will send the message to owner using the SIM card present in the GSM modem. We
can also check the continuous status of the device.
An IDS for Secure Visible Light Communication on Android Devices
This poster concisely presents my research during my time at Florida International University. Experiments showed that data could be transferred to Android devices via sensor inputs, allowing the light sensor to be abused by environment light modulation and malware to be triggered or possibly transferred and data such as location information to be detected. With the development of an Android ROM to monitor this abuse, the sensory channel can be secured.
Anam rajkumar sarvesh k10779,k10626
This document discusses a presentation on a smart explosive detector robot. The robot uses an Android phone camera mounted on a hydraulic robotic arm to remotely inspect vehicles for explosives. An ultrasonic sensor helps the arm avoid obstacles while moving under vehicles. The system utilizes IP networking so inspection personnel can remotely control the robot and view its camera feed from a safe control room. The robot provides a safer and more effective alternative to traditional manual under-vehicle inspections and has applications in security screening at industries, power plants, and military sites.
Anam rajkumar sarvesh
This document describes a smart explosive detector robot. It uses an Android phone camera mounted on a hydraulic robotic arm to provide real-time video over an IP network to a control room. An ultrasonic sensor helps the arm avoid obstacles while detecting explosives. The robot provides more efficient, reliable and safe under-vehicle inspections compared to traditional methods. Its applications include security screening at industries, power plants and military sites.
Implementation of vision based intelligent home security system using ARM7
This document describes the implementation of a vision-based intelligent home security system using an ARM7 processor. The system uses a motion detection algorithm with an IR sensor to detect human movement. When movement is detected, an image is captured with a camera. If an unauthorized person is identified, an SMS is sent to registered phone numbers and an email is sent with the captured photo. The system can also automatically control loads like lights and fans based on the number of people detected in a home. The system aims to provide low-cost home security and prevent power wastage.
IOT Based Soldier Position Tracking and Health Monitoring System
This document describes an IOT-based system to track soldier positions and monitor their health in real-time. The system uses sensors like GPS, temperature, and pulse rate attached to soldiers to monitor and transmit their location and vital signs to a base station. If a soldier is injured, their changing vital signs would alert the base station, which could then locate the soldier using the GPS data and provide immediate medical assistance. The system aims to improve soldier safety and reduce rescue response times in emergencies. It transmits sensor data like temperature and pulse rate to the base station using GSM modules. A mobile app displays the data to monitor soldier health remotely.
car accident.pptx
This document presents a smart shop security system project. It includes an introduction describing the motivation to develop a more advanced security system than typical alarm systems. It then provides an outline of the topics to be covered, including objectives, components, diagrams, cost analysis, advantages and applications. The system uses various sensors to detect theft, a GSM modem and WiFi to alert owners and police via message, and is controlled with an Arduino Nano microcontroller. It aims to provide real-time surveillance and notification in the event of a break-in attempt.
Security system with face recognition, sms alert and embedded network video m...
Even though there are various security systems consuming large power are available in market nowadays,
robbery rate is very high. We are proposing a novel system to prevent robbery in highly secure areas with
lesser power consumption. This system has face-recognition technology which grants access to only
authorized people to enter that area. If others enter the place without access using some other means, then
the system alerts the security personnel and streams the video captured by the security camera. The facerecognition
is done using PCA algorithm. The video transmitted is compressed and transmitted by ENVMT.
By using this ENVMT, the video can play with lesser bandwidth consumption, latency and jitter.
A ZIGBEE AND EMBEDDED BASED SECURITY MONITORING AND CONTROL SYSTEM
This document presents a smart security system using Zigbee wireless technology, GSM, sensors, and a smartphone. The system allows a homeowner to monitor and control their home security from a remote location. When a sensor detects an intrusion, a signal is sent to a microcontroller and then to the homeowner's phone via Zigbee and GSM. The owner can then make a video call to view their home and optionally activate a gas spray or lock the doors for added protection. The system provides remote monitoring and control of a home security system in a low-cost and easy to install package.
A zigbee and embedded based security
As technology becomes more advanced and modernized; more features are added to the existing system
for the purpose of satisfying the increasing security needs of the people. Deploying wireless technologies
for security and control in home offers attractive benefits along with user friendly interface. In this paper
we present a smart security system comprises of Zigbee, GSM, Sensors and Smartphone for Security
monitoring and control, when the user is at remote premises. Three sensors namely P
IR, vibration and door sensor are installed at windows and doors. Whenever there is a security breach the
sensors sends the signal to the Pic microcontroller. The Max 232 converter provides serial interface
between the microcontroller and the zigbee. The Zigbee end device then transmits the signal to the Zigbee
coordinator. The ZC at the control console communicates with MCU using max 232 converters. MCU
would in turn access and control the GSM module via AT commands and automatically sends SMS to the
owner's mobile phone informing him about the security breach. On receiving the SMS, user can make a
video call using Skype account; Smartphone installed at home will feed us with a live video. On viewing
the video the user can know whether an intruder has entered or not. Then accordingly faint gas valve and
door lock can be controlled by the user. Thus whenever there is an intrusion, our system lets the user to
monitor and control his premises from any part of the world.
Embedded project list 1 softroniics
We provide project guidance for final year MTech, BTech, MSc, MCA, ME, BE, BSc, BCA & Diploma students in Electronics, Computer Science, Information Technology, Instrumentation, Electrical & Electronics, Power electronics, Mechanical, Automobile etc. We provide live project assistance and will make the students involve throughout the project. We specialize in Matlab, VLSI, CST, JAVA, .NET, ANDROID, PHP, NS2, EMBEDDED, ARDUINO, ARM, DSP, etc based areas. We research in Image processing, Signal Processing, Wireless communication, Cloud computing, Data mining, Networking, Artificial Intelligence and several other areas. We provide complete support in project completion, documentation and other works related to project.
Call us at: 9037291113.
web: www.softroniics.in
electronics-embedded-project-topics-list-softroniics
This document describes several IEEE projects proposed by Softroniics, an electronics company. It includes projects such as:
1. A GPS-GSM based public transportation tracking system with three modules to track buses and notify users.
2. An automated environmental control system called "Green Bee" that monitors parameters like humidity, temperature and moisture using sensors and controls them automatically.
3. A road follower truck robot that follows roads using infrared sensors to detect the road's color and navigate without a driver.
The document provides descriptions of 15 additional projects ranging from remote controlled robots and surveillance systems to smart home energy management, traffic control, and agricultural monitoring systems. All projects leverage technologies like GPS, GSM,
Embeddedprojectlist1 softroniics-150709100549-lva1-app6892
This document describes several IEEE projects proposed by Softroniics, an electronics company. It includes projects related to:
1. A public transportation management system using GPS and GSM modules to track buses and notify users.
2. An environmental monitoring system that automatically controls parameters like humidity, temperature, and moisture.
3. A road-following truck that uses infrared sensors to stay on the road without a driver.
4. Several other projects involving wireless control, security, traffic management, and environmental monitoring using technologies like Zigbee, GSM, and sensors. The document provides brief 1-paragraph descriptions of 21 projects in total.
Embeddedprojectlist1 softroniics-150709100549-lva1-app6892
We provide project guidance for final year MTech, BTech, MSc, MCA, ME, BE, BSc, BCA & Diploma students in Electronics, Computer Science, Information Technology, Instrumentation, Electrical & Electronics, Power electronics, Mechanical, Automobile etc. We provide live project assistance and will make the students involve throughout the project. We specialize in Matlab, VLSI, CST, JAVA, .NET, ANDROID, PHP, NS2, EMBEDDED, ARDUINO, ARM, DSP, etc based areas. We research in Image processing, Signal Processing, Wireless communication, Cloud computing, Data mining, Networking, Artificial Intelligence and several other areas. We provide complete support in project completion, documentation and other works related to project.
Call us at: 9037291113.
web: www.softroniics.in
Similar to MOBILE MONITORNG SYSTEM FOR SMART HOMES (20)
REAL TIME FACE DETECTING UNAUTHORIZED HUMAN MOVEMENT USING ESP 32 CAM MODULE
REAL TIME FACE DETECTING UNAUTHORIZED HUMAN MOVEMENT USING ESP 32 CAM MODULE
ย
Advanced Automation System in Industrial Applications Using PIC Microcontrol...
Advanced Automation System in Industrial Applications Using PIC Microcontrol...
ย
An IDS for Secure Visible Light Communication on Android Devices
An IDS for Secure Visible Light Communication on Android Devices
ย
Implementation of vision based intelligent home security system using ARM7
Implementation of vision based intelligent home security system using ARM7
ย
IOT Based Soldier Position Tracking and Health Monitoring System
IOT Based Soldier Position Tracking and Health Monitoring System
ย
Security system with face recognition, sms alert and embedded network video m...
Security system with face recognition, sms alert and embedded network video m...
ย
A ZIGBEE AND EMBEDDED BASED SECURITY MONITORING AND CONTROL SYSTEM
A ZIGBEE AND EMBEDDED BASED SECURITY MONITORING AND CONTROL SYSTEM
ย
electronics-embedded-project-topics-list-softroniics
electronics-embedded-project-topics-list-softroniics
ย
Embeddedprojectlist1 softroniics-150709100549-lva1-app6892
Embeddedprojectlist1 softroniics-150709100549-lva1-app6892
ย
Embeddedprojectlist1 softroniics-150709100549-lva1-app6892
Embeddedprojectlist1 softroniics-150709100549-lva1-app6892
ย
More from JOLLUSUDARSHANREDDY
RTOS CASE STUDY OF CODING FOR SENDING APPLIC...
RTOS
CASE STUDY OF CODING FOR SENDING APPLICATION LAYER BYTE STREAMS ON A TCP/IP NETWORK USING RTOS VX Works
MEMORY MANAGEMENT
The document discusses the responsibilities and functions of an operating system's memory manager. The memory manager must securely allocate memory in a way that prevents memory leaks and stack overflows. It allocates memory dynamically using different techniques, including fixed and dynamic block allocation, dynamic page allocation, and dynamic address relocation. The memory manager also protects memory access between the operating system functions and tasks running on the system.
Os security issues
The document discusses several important operating system security issues. The operating system must provide protection mechanisms to prevent unauthorized access to processes and resources. It also needs flexibility to configure how resources are shared between processes and change these configurations as needed. Key security issues for an operating system include implementing protection mechanisms, controlling resource sharing, enforcing security policies, and utilizing authentication and authorization.
Basic functions & types of RTOS ES
This document discusses the basic functions and types of real-time operating systems (RTOS) for embedded systems. It describes key RTOS functions like integrated development environments, timers, scheduling, device drivers, inter-process communication, and memory management. It also categorizes different types of RTOS as in-house developed, broad-based commercial, general purpose OS with RTOS features, and special focus RTOS tailored for specific processors. Overall, the document provides a high-level overview of RTOS functions and classifications.
RTOS LINUX2.6.X & LINUX2.6.24
This document discusses real-time Linux functions. It begins with an introduction stating that Linux 2.6.x introduced enhancements for embedded systems, including preemptive scheduling, high resolution timers, and preemptive interrupt service threads. Linux 2.6.24, released in 2008, is the latest version. The document then describes several real-time Linux functions, including process management, memory management, file systems, shared memory, networking, and device control. It also discusses Linux modules, interprocess communication methods like signals, multithreading, semaphores and message queues, and functions for registering and deregistering Linux modules.
OSEK / VDX
The document discusses the OSEK/VDX standard which defines interfaces and protocols for automotive embedded systems to enable portability, reusability, and extensibility of software. It provides an overview of the OSEK/VDX operating system including the task concept, scheduler, events, alarms, resources, and interrupt processing. The OSEK/VDX standard aims to improve quality and reduce costs for automotive embedded control software.
DEVICE FILE AND INPUT OUTPUT SUBSYSTEMS MANAGEMENT
1) A device manager, either inside or outside the kernel, coordinates communication between applications, drivers, and devices by managing I/O requests and interrupt queues.
2) The device manager creates a kernel interface and API to control devices by activating their register-specific actions.
3) Device management involves polling, interrupts, and DMA and supports various I/O approaches including programmed, interrupt-driven, and DMA-driven I/O.
INTERRUPT LATENCY AND RESPONSE OF THE TASK
This document discusses performance metrics for real-time operating systems (RTOS), including interrupt latency, context switching latency, CPU load, and worst-case execution time. It describes three key components of RTOS performance: the ratio of interrupt latencies to execution times, CPU load, and the ratio of worst-case execution times to average execution times. Several models for measuring these metrics are presented, such as calculating CPU load based on task execution times and periods, and determining worst-case performance for sporadic tasks.
INTERRUPT ROUTINES IN RTOS EN VIRONMENT HANDELING OF INTERRUPT SOURCE CALLS
There are three ways for an RTOS to handle interrupts:
1. The interrupt source directly calls the ISR.
2. The RTOS first handles the interrupt, then calls the corresponding ISR.
3. The RTOS first handles the interrupt, then initiates a fast-level ISR (FLISR) followed by a slow-level ISR (SLISR) or interrupt service thread (IST), with the FLISR aiming to reduce interrupt latency.
Rt linux-lab1
Real-Time Operating System (RTOS) Vs. General Purpose OS (GPOS)
Can Linux provide real-time guarantees?
Commercial RTOSs
RTLinux Vs. Linux: Architectural comparison
RTLinux Vs. Linux: Code perspective
Get the RTLinux setup ready
Things to Issue and Handling the hard disk
Lab #1: Detailed discussion
RTOS MICRO CONTROLLER OPERATING SYSTEM-2
INTRODUCTION: One popular RTOS For the E.S development is microCOS-ll for noncommercial use, it is free ware .jean J.labrosse designed it in 1992 it is well developed for a no.of applications.it is available from micrium it is popularly known as MUCOS (or) UCOS.
WINDOWS-CE
This document discusses operating systems mechanisms and overhead for embedded systems. It covers the differences between general-purpose and real-time operating system schedulers, memory management techniques including those used in Windows CE, interrupt handling, and context switching overhead. It also discusses embedded file systems, wear leveling, log-structured file systems, and verification of concurrent systems using model checking and temporal logic properties.
CASE STUDY OF DIGITAL CAMERA HARDWARE AND SOFT WARE ARCHITECTURECASE STUDY OF...
CASE STUDY OF DIGITAL CAMERA HARDWARE AND SOFT WARE ARCHITECTURECASE STUDY OF...JOLLUSUDARSHANREDDY
This technical paper describes the architecture of a digital camera. It discusses the camera's hardware requirements including image sensors and memory storage. It then outlines the software architecture with layers for system services, application tasks, functions, presentation and control. The paper concludes that digital cameras allow capturing of images and videos, transferring the data to computers through various connection devices, and provides an overview of the camera's hardware and software design.ย
SOLAR TRACKING SYSTEM BY USING MICROCONTROLLER
Energy is essential factor for the development of any nation.
The resources of the fossil fuels are limited.
Solar made from panel directly converts solar radiation into electrical energy. Solar panel is mainly semiconductor.
Zigbee Based Solar Light System By Using LDR
In this project, the data can be transmitted to and received from remote Zigbee communication device. Data Security is primary concern for every communication system.
In this present days in every rural areas developed but in the urban areas like hilly areas there is major problem facing.so to modify that type of problems we are introducing this project.
Design of smart nodes for wireless sensor network ...
This project aims to develop a smart home system for disabled people.
To monitor the environmental conditions.
To providing safe, secure and empowering environments.
BOMB DETECTION ROBOT BY USING GSM & GPS
In the present day scenario we are facing many threats by bomb blasts
so our project aim is to prepare aย unmanned vehicle .
STUDENT DATA LOGGING SYSTEM INTO COLLEGE WEBSITE BASED ON RFID
saving time โ important administrative and educational resources could be freed up by utilizing college attendance management system(cams)
Radio frequency identification is the use of radio waves to read and capture information stored on a tag attached to an object .
SOLAR BASED MOBILE CHARGER IN RURAL AREAS
Solar energy has proven its wroth of alternative energy.
Freehand available everywhere, the power of the sun can be employed to power Everything like cell phones and mp3 players.
wireless security control system and sensor network for smoke and fire detection
wireless security control system and sensor network for smoke and fire detectionJOLLUSUDARSHANREDDY
This technical paper presents a wireless security control system and sensor network for smoke and fire detection. The system uses a microcontroller, smoke sensor, fire sensor, LCD, buzzer, and GSM to detect smoke and fire, display information, sound an alarm, and alert authorized individuals via text message. It aims to protect homes and public areas from fire accidents in a low-cost and automated way. The system has applications in buses, trains, forests, industries, and residential/commercial areas and offers advantages like reduced manpower needs, low cost, time savings, and increased safety.ย
More from JOLLUSUDARSHANREDDY (20)
DEVICE FILE AND INPUT OUTPUT SUBSYSTEMS MANAGEMENT
DEVICE FILE AND INPUT OUTPUT SUBSYSTEMS MANAGEMENT
ย
INTERRUPT ROUTINES IN RTOS EN VIRONMENT HANDELING OF INTERRUPT SOURCE CALLS
INTERRUPT ROUTINES IN RTOS EN VIRONMENT HANDELING OF INTERRUPT SOURCE CALLS
ย
CASE STUDY OF DIGITAL CAMERA HARDWARE AND SOFT WARE ARCHITECTURECASE STUDY OF...
CASE STUDY OF DIGITAL CAMERA HARDWARE AND SOFT WARE ARCHITECTURECASE STUDY OF...
ย
Design of smart nodes for wireless sensor network ...
Design of smart nodes for wireless sensor network ...
ย
STUDENT DATA LOGGING SYSTEM INTO COLLEGE WEBSITE BASED ON RFID
STUDENT DATA LOGGING SYSTEM INTO COLLEGE WEBSITE BASED ON RFID
ย
wireless security control system and sensor network for smoke and fire detection
wireless security control system and sensor network for smoke and fire detection
ย
Recently uploaded
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Ivรกn Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
skeleton System.pdf (skeleton system wow)
๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ
โ โุฅุถุบ ุจูู ุฅูุฏููู
โู
ู ุฃููู ุงูู
ูุงุฒู
ุงูุชู ุตู
ู
ุชูุง
ู
ูุฒู
ุฉ ุชุดุฑูุญ ุงูุฌูุงุฒ ุงูููููู (ูุธุฑู 3)
๐๐๐๐๐๐๐๐๐๐
ุชุชู
ูุฒ ูุฐูู ุงูู
ูุฒู
ุฉ ุจุนูุฏุฉ ู
ูู
ูุฒุงุช :
1- ู
ูุชุฑุฌู
ุฉ ุชุฑุฌู
ุฉ ุชููุงุณุจ ุฌู
ูุน ุงูู
ุณุชููุงุช
2- ุชุญุชูู ุนูู 78 ุฑุณู
ุชูุถูุญู ููู ููู
ุฉ ู
ูุฌูุฏุฉ ุจุงูู
ูุฒู
ุฉ (ููู ููู
ุฉ !!!!)
#ููู
_ู
ุงูู_ุฏุฑุฎ
3- ุฏูุฉ ุงููุชุงุจุฉ ูุงูุตูุฑ ุนุงููุฉ ุฌุฏุงู ุฌุฏุงู ุฌุฏุงู
4- ูููุงูู ุจุนุถ ุงูู
ุนููู
ุงุช ุชู
ุชูุถูุญูุง ุจุดูู ุชูุตููู ุฌุฏุงู (ุชูุนุชุจุฑ ูุฏู ุงูุทุงูุจ ุฃู ุงูุทุงูุจุฉ ุจุฅููุง ู
ุนููู
ุงุช ู
ูุจูู
ุฉ ูู
ุน ุฐูู ุชู
ุชูุถูุญ ูุฐูู ุงูู
ุนููู
ุงุช ุงูู
ูุจูู
ุฉ ุจุดูู ุชูุตููู ุฌุฏุงู
5- ุงูู
ูุฒู
ุฉ ุชุดุฑุญ ููุณูุง ุจ ููุณูุง ุจุณ ุชููู ุชุนุงู ุงูุฑุงูู
6- ุชุญุชูู ุงูู
ูุฒู
ุฉ ูู ุงูู ุณูุงูุฏ ุนูู ุฎุงุฑุทุฉ ุชุชุถู
ู ุฌู
ูุน ุชูุฑูุนุงุช ู
ุนููู
ุงุช ุงูุฌูุงุฒ ุงูููููู ุงูู
ุฐููุฑุฉ ูู ูุฐูู ุงูู
ูุฒู
ุฉ
ูุงุฎูุฑุงู ูุฐูู ุงูู
ูุฒู
ุฉ ุญูุงูู ุนูููู
ูุฅุชู
ูู ู
ููู
ุฅู ุชุฏุนููู ุจุงูุฎูุฑ ูุงูุตุญุฉ ูุงูุนุงููุฉ ููุท
ูู ุงูุชูููู ุฒู
ูุงุฆู ูุฒู
ููุงุชู ุ ุฒู
ูููู
ู
ุญู
ุฏ ุงูุฐูุจู ๐๐
๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdfุณู
ูุฑ ุจุณูููู
ู
ุตุญู ุฃุญุฑู ุงูุฎูุงู ูููุฑุงุก ุงูุนุดุฑุฉุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุจุงูุชูููู ูุตูุง ุณู
ูุฑ ุจุณูููู ุบูุฑ ุงููู ููย
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Recently uploaded (20)
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
ย
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
ย
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
ย
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
ย
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ย
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
ย
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
ย
MOBILE MONITORNG SYSTEM FOR SMART HOMES
- 1. A PROJECT REPORT ON MOBILE MONITORNG SYSTEM FOR SMART HOMES SUBMITTED BY J.SUDARSHANREDDY-117Y1A0425 Under the esteemed guidance of Mr. N.N.SWAMY Sir M.Tech, Assistant Professor of ECE department A1 GLOBAL INSTITUTE OF ENGINEERING & TECHNOLOGY(7Y)- MARKAPUR Department of Electronics & Communication Engineering
- 2. ABSTRACT INTRODUCTION BLOCK DIAGRAM OPERATON HARDWARE REQUIREMENTS SOFTWARE REQUIREMENTS ADVANTAGES APPLICATIONS Topics Of Discussion
- 3. In our present days the technology is increased in various ways Coming to homes now a days in their also we are using technology for time & energy saving purpose, In this PIR sensor we placing to detect the unauthorized people who will enter in to the room When PIR sensor detect the person the loads will automatically on or presence by their appearance
- 4. ๏ผ Aim of the project is to develop a system based on Embedded micro controller. ๏ผ Which is used for controlling various application at home using(GSM) network and which provides a security features. ๏ผ The major hardware interference to micro controller are LCD display and a modem(GSM).
- 6. ๏ In PIR infrared rays are move from transmitter to receiver ,when unauthorized person enter through the room the PIR sensor disturb give signal to the ARM7. ๏The power supply for ARM7 has 3.3vDC is used . ๏Here the person is enter through the room the PIR sensor give signal to ARM-7. ๏Then automatically the loads (lights ,fans)are on when controller activate LCD can operate. ๏The LCD is display when ARM-7 is sends the signal ,the information are enter at the LCD ,it is display which displays information. ๏From ARM7 move the information to the mobile by using GSM . OPERATION
- 8. ๏ฝ Embedded C ๏ฝ Keil Software ๏ฝ Proteus
- 9. ๏ฝ Simple and easy to access. ๏ฝ Accessed from remote area. ๏ฝ Low power consumption. ๏ฝ Portability.
- 10. ๏ It is apply on banks for secure purpose. ๏ Control of doors and windows shutters. ๏ Home entertainment system. ๏ Security system.