Presentazione Scenario Prodotti di ultima generazione tratta dal seminario internazionale Helping you to build a better networks conclusosi con l\'ultima tappa di Lisbona Portogallo lo scorso luglio
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second (10×109 or 10 billion bits per second). It was first defined by the IEEE 802.3ae-2002 standard.
Webinar NETGEAR - Full Managed Switch M4300 la modalità Spine & Leaf per pote...Netgear Italia
La modalità di stacking reale Spine & Leaf permette di eliminare i colli di bottiglia della vostra rete laddove i servizi siano esigenti in termini di banda , di sicurezza e criticità.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
As a successful international cable manufacturer nobody knows more about cable than Draka. Through a continual programme of research and development, Draka lead the way with a world beating range of premium quality cables that meet and often exceed British Standards and are fully BASEC approved.
Draka is a major supplier to the construction industry, with a complete range of housewiring and low voltage supply cables, for use in domestic premises, commercial office developments and public buildings, such as retail business parks, hospitals and sports complexes. In addition to this general range of energy cables, the company is a market leader in the production of fire retardant cables and addresses the needs of a host of specific, individual markets and applications.
Webinar NETGEAR - La tecnologia Multi-Gigabit, switch con porte multi velocitàNetgear Italia
Introduzione della tecnologia e del relativo impiego nell'attuale mercato, con una breve presentazione delle nuove soluzioni Multi-Gigabit. 7 modelli di switch che soddisfano diverse esigenze.
Prysmian Group/Draka is world leader in the energy and telecom cables and systems industry. With sales ofsome €8 billion in 2012, more than 20,000 employees across 50 countries and 91 plants , the Group is strongly positioned in high-tech markets and offers the widest range of products, services, technologies and know-how
Prysmian Cables & Systems is the UK's largest domestic manufacturer of energy and telecommunications cables and systems to service home and export markets.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second (10×109 or 10 billion bits per second). It was first defined by the IEEE 802.3ae-2002 standard.
Webinar NETGEAR - Full Managed Switch M4300 la modalità Spine & Leaf per pote...Netgear Italia
La modalità di stacking reale Spine & Leaf permette di eliminare i colli di bottiglia della vostra rete laddove i servizi siano esigenti in termini di banda , di sicurezza e criticità.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
As a successful international cable manufacturer nobody knows more about cable than Draka. Through a continual programme of research and development, Draka lead the way with a world beating range of premium quality cables that meet and often exceed British Standards and are fully BASEC approved.
Draka is a major supplier to the construction industry, with a complete range of housewiring and low voltage supply cables, for use in domestic premises, commercial office developments and public buildings, such as retail business parks, hospitals and sports complexes. In addition to this general range of energy cables, the company is a market leader in the production of fire retardant cables and addresses the needs of a host of specific, individual markets and applications.
Webinar NETGEAR - La tecnologia Multi-Gigabit, switch con porte multi velocitàNetgear Italia
Introduzione della tecnologia e del relativo impiego nell'attuale mercato, con una breve presentazione delle nuove soluzioni Multi-Gigabit. 7 modelli di switch che soddisfano diverse esigenze.
Prysmian Group/Draka is world leader in the energy and telecom cables and systems industry. With sales ofsome €8 billion in 2012, more than 20,000 employees across 50 countries and 91 plants , the Group is strongly positioned in high-tech markets and offers the widest range of products, services, technologies and know-how
Prysmian Cables & Systems is the UK's largest domestic manufacturer of energy and telecommunications cables and systems to service home and export markets.
Presentazione Scenario Normative Internazionali tratta dal seminario HELPING YOU BUILD A BETTER NETWORKS conclusosi con l\'ultima tappa di Lisbona in Portogallo
Presentazione "Scenario Nuovi prodotti e nuove frontiere della Fibra Ottica" tratta dal Seminario Internazionale "Helping you build a better network conclusosi a con l\'ultima tappa di Lisbona Portogallo lo scorso luglio
Presentazione Futurology 10-40-100 GBEthernet tratta dal seminario internazionale Helping you to build a better networks conclusosi lo scorso luglio a LISBONA Portogallo
Mike Novak
Tellabs
This session will focus on the underlying GPON (Gigabit Passive Optical Network) and All-Secure PON infrastructure, the implications to the Layer-1 design, using Armored Interlocking Fiber to deploy NIPR/SIPR data and voice requirements.
Drivers for FTTx
Why fiber
Fiber feeds everything
Flavors of FTTX
Nuts and bolts – the components
Installation techniques
Network design configurations
Machines & Tool
FTTx Roll out /Delivery Mechanism
Outside Plant Fiber Optic Cable
Fibre entering in Building design
Aerial Cable Construction Tool
Spicing Machines & Other Tools
Next Generation Fiber Structured Cabling and Migration to 40/100gPanduit
The new high speed Ethernet standards, 40GBASE-SR4 and 100GBASE-SR10, will require a change in the fiber cable plant. Here we examine the media and connectivity solutions needed to ease the migration for 10 Gigabit Ethernet to 40 and 100 Gigabit Ethernet.
Presented by Mark Boxer & Jeff Bush of OFS
Agenda:
• Why Fiber?
• Fiber Feeds Everything
• Nuts and Bolts -The Components
• Installation Techniques
• Network Architectures and Planning
Benefits of multi layer bandwidth management in next generation core optical ...Anuj Malik
OFC 2013 Presentation
This preso evaluates multi-layer switching architecture vs. all-optical and all-digital switching architectures. Further, the value of incorporating super-channels is evaluated to determine benefit. A real world network model is utilized to quantify and compare results.
DP101 industrial 1-port Fast Ethernet PoE to fiber media converter | WoMasterWoMaster
Product Introduction of Industrial 1-port Fast Ethernet PoE to Fiber Media Converter DP101 designed and manufactured by WoMaster - Master in IIoT World.
Bao gồm Copper Cables (CAT3/CAT5e/CAT6/CAT6A/CAT7), Fiber Optical Cables, Coaxial Cables (RG6,RG11,RF…), Signal & Control Cables, và các phụ kiện (Patch Panel, Patch Cord, Connectivity, Outlet, Tools, rack, Closet,…), theo tiêu chuẩn Âu/Mỹ (USA(UL Listed) & European Standard (DELTA)). Trade mark of this series is SIMPLE, sản xuất tại Việt nam ( UTP CAT5e/CAT6) và Hàn Quốc (Other Cables & Accessories). LS Cable & System sản xuất UTP CAT5e/CAT6 tại nhà máy LSCV Nhơn Trạch, Đồng Nai từ 2007. Hầu hết sản phẩm được xuất khẩu sang Mỹ, Châu Âu, Nhật, Trung Đông,…và được phân phối rộng rãi tại Việt Nam từ năm 2013.
Alexis Dacquay – is CCIE with over 10 years experience in the networking industry. He has in the past been designing, deploying, and supporting some large corporate LAN/WAN networks. He has in the last 4 years specialised in high performance datacenter networking to satisfy the needs of cloud providers, web2.0, big data, HPC, HFT, and any other enterprise for which high performing network is critical to their business. Originally from Bretagne, privately a huge fan of polish cuisine.
Topic of Presentation: Handling high-bandwidth-consumption applications in a modern DC design
Language: English
Abstract: Modern Data Centre requires proper handling of high-bandwidth consuming applications, like BigData or IP Storage. To achieve this, next generation Ethernet speeds of 25, 50 and 100Gbps are being pursued. We are to show _why_ these new Ethernet speeds are vital from technology standpoint and _how_ to cope with the those sparkling new requirements by networking hardware enablements. We are to share ethernet switches’ design considerations, with the biggest emphasis put on the importance of big buffers and how they accommodate this bursty traffic. Throughout the presentation we will additionally elaborate on the evolution of variety of modern applications, and how we can handle those with the properly designed hardware, software, and Data Centre itself.
Similar to Milan Product Solutions Version 1.4 (20)
4. Power Consumption
Typical power consumption of a Typical power consumption of
450W 2U server Ethernet PHYs
ac/dc losses 131
10G Copper 10
processors 86
10G Fibre 2
drives 72
pci cards 41 1G Fibre 1
chip set 32 1G Copper 0.65
fans 32
100M Fibre 0.6
dc/dc losses 32
memory 27 100M Copper 0.25
0 50 100 150 0 5 10 15
Watts Watts
802.3az – energy efficient ethernet - 2010
5. Effects of cabling on cooling air flow rates through tiles
Small DC model
Basics:
• 1000sq ft
• 2ft high plenum space
• 3kw server racks
• 10,000CFM CRACs
• 25% aperture tiles
• 100 cables per rack
Simulation outputs include:
• Rack & room temperatures
• Press. and vol. flow above &
below the floor
• Flow rates & estimated cooling
capacity per tile
6. 10% improvement in cooling air flow rates through tiles
Simulation air flow rates
• No data cables underfloor
– 382 to 431 CFM
• 5.5mm OD cables on trays
– 381 to 437 CFM
• 5.5mm OD cables on the floor
– 380 to 436 CFM
• 7.2mm OD cables on trays
– 391 to 424 CFM
• 8.5mm OD cables on trays
– 361 to 392 CFM
7. Zone cabling
• Reduces space taken in pathways
– AC6 UTP 8.3mm 50 links
– AC6 DCZ 5.4mm 118 links
• Reduces weight in trays
– AC6 UTP 79 kg/km
– AC6 DCZ 33 kg/km
• Standards Conformant
• Xconn – LDP – EO 77 m
IEC 24764 (draft)
IEC 61156-6
EN 50173-5
EN 50288-10-2 (draft)
8. ½ U height panels
Features:
– Category 6 performance
– ½ U height 24 port panels
Benefits:
• to benefit the installer:
– logical and quick installation
– Standard termination
methods
• to benefit the end user:
– Reduces height in rack
– Reduces depth in rack
– Reduces blockage of exhaust
air
9. • Micro Distribution Cables (12f & 24f)
Buffer Diameter: 0.6 mm
12f Cable Diameter: 4.0 mm
24f OD: 5.8mm
• Dual Loose Tube (24f)
Tube Diameter: 2.5 mm
Cable Diameter: 7.2 x 8.1mm
Cable Weight: 60 kg/km
• Multi-Loose tube (48f)
Tube Diameter: 2.5 mm
Cable Diameter: 9.4 mm
Cable Weight: 84 kg/km
10. MT Connect Pre-terminated solutions
• Pro’s
– Modularity
– Faster installation
– Quicker repair time
– Shorter maintenance time
– Less downtime
– MT ferrule based
• 12 or 24f
• Con’s
– Higher initial cost
– MT ferrule based
• 0.36dB
• 12 or 24f
11. MT Connect Link Upgrading
100m OM3 link example:
Max Link loss
2 LC & 2 MPO: 2.85dB1 2.2dB*
2 MPO: 1.85dB1 1.6dB*
1 Standard method
* Monte-Carlo modelled link
loss based on component
quality stats & 5 9s reliability
12. Energy Efficient Solutions
• CoC Data Centre Efficiency
• Reduce the space taken by cabling in pathways
– Less cables - Efficient system design
– Smaller cables
– Smaller footprint panels (1/2U)
– Higher density X-connect systems
• Modular system
– Modular, scaleable, quick install cabling systems
• Switches
– Change to lower power, lower speed, when idle
– Reduce power levels to the minimum required for the cable
length
• 1000BASE-T & 10GBASE-T - cable performance will be critical
14. 45U high 500x900mm cabinet
• ‘V12’ technology panels:
• 45U cabinet
– ‘V12’ panels (9U cable management) 864 ports
– Standard panels (2U/1U manager) 720 ports
– Standard panels (1U/1U manager) 528 ports
864 Cu ports per cabinet
15.
16. High Density FO X-connect
• Optimised spatial and
ergonomic design
– Small footprint
– 500x900mm
– 38U of 48 port panels
• Cable Management
– Large patching field
– 70mm bend management
• Installation friendly
– Front of rack working
– Logical routing
1824 fibre ports per cabinet
17. Tubing
Network
Manifold
• 38U
- 19 ports top
- 19 ports bottom
• Loose tube/ buffered Fibre enters from floor.
• Roof entry option in development.
• Blown fibre option in development.
21. 6 cabinets = 6x1824 fibre ports or 6x864 Cu ports or a mix
22. Helping to build better Networks
• Providing information:
– Communicating on cabling standards developments and
associated applications developments and interpreting the
implications for the cabling industry
• Providing solutions
– Introducing new product sets, designed to be compliant to
new standards, in a timely fashion
– Introducing innovative product solutions which give a
competitive advantage
• Providing Assurance
– Ensuring compliance with regulations and directives
– Actively participating in the industry standardisation of new
technologies