This document discusses heat transfer in a thin liquid film over an unsteady stretching surface. The flow is influenced by an external magnetic field and includes effects of viscous dissipation and non-uniform heat sources. Governing equations for momentum and energy are non-dimensionalized using similarity transformations, reducing them to a system of nonlinear ordinary differential equations. These equations are solved numerically using Runge-Kutta shooting methods to obtain velocity and temperature profiles within the film. Results show the heat flux from the surface decreases with increasing unsteadiness for Prandtl numbers below 1 and increases for Prandtl numbers above 1.
Numerical simulation on laminar convection flow and heat transfer over an iso...eSAT Journals
Abstract A numerical algorithm is presented for studying laminar convection flow and heat transfer over an isothermal vertical horizontal plate embedded in a saturated porous medium. By means of similarity transformation, the original nonlinear partial differential equations of flow are transformed to a pair of nonlinear ordinary differential equations. Subsequently they are reduced to a first order system and integrated using Newton Raphson and adaptive Runge-Kutta methods. The computer codes are developed for this numerical analysis in Matlab environment. Velocity and temperature profiles are illustrated graphically. Heat transfer parameters are derived. Keywords
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Couette type mhd flow with suction and injection under constant pressure grad...eSAT Journals
Abstract The unsteady magnetohydrodynamic Couette-type flow of an electrically conducting, viscous and incompressible fluid bounded by two parallel non- conducting porous plates under the influence of a constant pressure gradient and a transversely applied uniform magnetic field is studied with heat transfer. A uniform suction on the upper plate and an injection on the lower plate are applied perpendicularly to the plates keeping the rates of suction and injection the same. The two plates are maintained at different but constant temperatures. The governing nonlinear partial differential equations are solved by both analytical as well as numerical methods. An exact solution for the velocity of the fluid has been obtained by Laplace transform method. The Crank-Nicholson implicit method is used to obtain the unsteady fluid velocity profile. The transient part of the fluid velocity tends to zero as the time t tends to infinity. The energy equation is solved by the finite difference method .The effect of the magnetic field coupled with suction and injection on the velocity and temperature distributions is examined graphically and discussed in the present work. Keywords: Magnetohydrodynamics, Transverse magnetic field, Suction and injection, Constant pressure gradient, Transient state flow, Crank-Nicholson implicit method, Finite difference method.
Numerical study of mhd boundary layer stagnation point flow and heat transfer...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Implementation of finite volume method in creeping flow around a circular cyl...eSAT Journals
Abstract
A Finite Volume Method have been performed in simulation of creeping flow around a circular cylinder contained between plates. By adopting the SIMPLE algorithm the governing equations are solved together with Papanastasious regularization. Apparent viscosity is calculated on each iteration by using forward difference operation. Yield surfaces are studied over the range of Oldroyd number 10≤Od≤〖10〗^4. The model results are found to be in good agreement with obtained results of the other method.
Keywords: Creeping flow, Finite Volume Method, Yielded and unyielded zone, Bingham number.
MHD Free Convection from an Isothermal Truncated Cone with Variable Viscosity...IJERA Editor
This paper presents a study of MHD free convection flow of an electrically conducting incompressible fluid with
variable viscosity about an isothermal truncated cone in the presence of heat generation or absorption. The fluid
viscosity is assumed to vary as a inverse linear function of temperature. The non-linear coupled partial
differential equations governing the flow and heat transfer have been solved numerically by using an implicit
finite - difference scheme along with quasilinearization technique. The non-similar solutions have been obtained
for the problem, overcoming numerical difficulties near the leading edge and in the downstream regime. Results
indicate that skin friction and heat transfer are strongly affected by, both, viscosity-variation parameter and
magnetic field. In fact, the transverse magnetic field influences the momentum and thermal fields, considerably.
Further, skin friction is found to decrease and heat transfer increases near the leading edge. Also, it is found that
the direction of heat transfer gets reversed during heat generation.
Numerical simulation on laminar convection flow and heat transfer over an iso...eSAT Journals
Abstract A numerical algorithm is presented for studying laminar convection flow and heat transfer over an isothermal vertical horizontal plate embedded in a saturated porous medium. By means of similarity transformation, the original nonlinear partial differential equations of flow are transformed to a pair of nonlinear ordinary differential equations. Subsequently they are reduced to a first order system and integrated using Newton Raphson and adaptive Runge-Kutta methods. The computer codes are developed for this numerical analysis in Matlab environment. Velocity and temperature profiles are illustrated graphically. Heat transfer parameters are derived. Keywords
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Couette type mhd flow with suction and injection under constant pressure grad...eSAT Journals
Abstract The unsteady magnetohydrodynamic Couette-type flow of an electrically conducting, viscous and incompressible fluid bounded by two parallel non- conducting porous plates under the influence of a constant pressure gradient and a transversely applied uniform magnetic field is studied with heat transfer. A uniform suction on the upper plate and an injection on the lower plate are applied perpendicularly to the plates keeping the rates of suction and injection the same. The two plates are maintained at different but constant temperatures. The governing nonlinear partial differential equations are solved by both analytical as well as numerical methods. An exact solution for the velocity of the fluid has been obtained by Laplace transform method. The Crank-Nicholson implicit method is used to obtain the unsteady fluid velocity profile. The transient part of the fluid velocity tends to zero as the time t tends to infinity. The energy equation is solved by the finite difference method .The effect of the magnetic field coupled with suction and injection on the velocity and temperature distributions is examined graphically and discussed in the present work. Keywords: Magnetohydrodynamics, Transverse magnetic field, Suction and injection, Constant pressure gradient, Transient state flow, Crank-Nicholson implicit method, Finite difference method.
Numerical study of mhd boundary layer stagnation point flow and heat transfer...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Implementation of finite volume method in creeping flow around a circular cyl...eSAT Journals
Abstract
A Finite Volume Method have been performed in simulation of creeping flow around a circular cylinder contained between plates. By adopting the SIMPLE algorithm the governing equations are solved together with Papanastasious regularization. Apparent viscosity is calculated on each iteration by using forward difference operation. Yield surfaces are studied over the range of Oldroyd number 10≤Od≤〖10〗^4. The model results are found to be in good agreement with obtained results of the other method.
Keywords: Creeping flow, Finite Volume Method, Yielded and unyielded zone, Bingham number.
MHD Free Convection from an Isothermal Truncated Cone with Variable Viscosity...IJERA Editor
This paper presents a study of MHD free convection flow of an electrically conducting incompressible fluid with
variable viscosity about an isothermal truncated cone in the presence of heat generation or absorption. The fluid
viscosity is assumed to vary as a inverse linear function of temperature. The non-linear coupled partial
differential equations governing the flow and heat transfer have been solved numerically by using an implicit
finite - difference scheme along with quasilinearization technique. The non-similar solutions have been obtained
for the problem, overcoming numerical difficulties near the leading edge and in the downstream regime. Results
indicate that skin friction and heat transfer are strongly affected by, both, viscosity-variation parameter and
magnetic field. In fact, the transverse magnetic field influences the momentum and thermal fields, considerably.
Further, skin friction is found to decrease and heat transfer increases near the leading edge. Also, it is found that
the direction of heat transfer gets reversed during heat generation.
The effect of magnetic field on the boundary layer flow over a stretching she...IAEME Publication
The boundary layer flow created due to a linearly stretching sheet in a nanofluid is studied numerically. The boundary value problem consisting of nonlinear partial differential equations are converted into nonlinear ordinary differential equations, using similarity transformation and are solved numerically using Runge-Kutta Fourth order method, with shooting technique. The transport equations include the effects of Brownian motion and thermophoresis.
MHD convection flow of viscous incompressible fluid over a stretched vertical...IJERA Editor
The effect of thermal radiation, viscous dissipation and hall current of the MHD convection flow of the viscous incompressible fluid over a stretched vertical flat plate has been discussed by using regular perturbation and homotophy perturbation technique with similarity solutions. The influence of various physical parameters on velocity, cross flow velocity and temperature of fluid has been obtained numerically and through graphs.
Non-NewtonianFluid Flow and Heat Transfer over a Non- Linearly Stretching Sur...IJERA Editor
This paper investigates the MHD flow and heat transfer of an electrically conducting non-newtonian power-law
fluid over a non-linearly stretching surface along with porous plate in porous medium. The governing equations
are reduced to non-linear ordinary differential equations by means of similarity transformations. These
equations are then solved numerically with the help ofRunge – Kutta shooting method. The effect of various
flow parameters in the form of dimensionless quantities on the flow field are discussed and presented
graphically.
Application of CAD and SLA Method in Dental ProsthesisIDES Editor
Placement of dental implants requires precise
planning that accounts for anatomic limitations and
restorative goals. Diagnosis can be made with the assistance
of computerized tomographic scanning, but transfer of
planning to the surgical field is limited. Precise implant
placement no longer relies upon so called mental-navigation
but rather can be computer guided, based on a three
dimensional prosthetically directed plan. Recently, novel CAD/
CAM techniques such as stereolithographic rapid prototyping
have been developed to build surgical guides in an attempt to
improve precision of implant placement. The purpose of this
paper is to discuss the use of scanning equipments to transfer
clinically relevant prosthetic information which can be used
for fabrication of stereolithographic medical models and
surgical guides. The proposed method provides solid evidence
that computer-aided design and manufacturing technologies
may become a new avenue for custom-made dental implants
design, analysis, and production in the 21st century.
The determination of the stress distribution around Pin-Loaded Holes in Mechanically Fastened Joints is presented to the Engineering Department, University of Technology - Jamaica
Effect on heat transfer and thermal development of a radiatively participatin...IAEME Publication
The paper deals with Simultaneous heat transfer by convection and radiation in a channel flow between two infinite black parallel plates is investigated. The effect of radiation on the heat transfer and the full thermal development of the flow is studied. The effect of scattering albedo, conduction-radiation
parameter and the optical thickness are examined.
Hertz Contact Stress Analysis and Validation Using Finite Element AnalysisPrabhakar Purushothaman
In general machines are designed with a set of elements to reduce cost, ease of assembly and manufacturability
etc. One also needs to address stress issues at the contact regions between any two elements, stress is induced when a load is applied to two elastic solids in contact. If not considered and addressed adequately serious flaws can occur within the mechanical design and the end product may fail to qualify. Stresses formed by the contact of two radii can cause extremely high stresses, the application and evaluation of Hertzian contact stress equations can estimate maximum stresses produced
and ways to mitigate can be sought. Hertz developed a theory to calculate the contact area and pressure between the two
surfaces and predict the resulting compression and stress induced in the objects. The roller bearing assembly and spur gear pair assembly is an example were the assembly undergoes fatigue failure due to contact stresses. This paper discusses the hertz contact theory validation using finite element Analysis.
Boundry Layer Flow and Heat Transfer along an Infinite Porous Hot Horizontal ...IJERA Editor
An analysis is made for the two-dimensional laminar boundary layer flow of a viscous, incompressible
fluid,along an infinite porous hot horizontal continuous moving plate. The governing system of partial
differential equations was transformed into ordinary differential equations before being solve by Natural
transformation. The effects of various physical parameters, such as Eckert number Ec , Prandtlnumber Pr ,
plate velocity α and heat source/sink parameter Sare presented and discussed. It is found that the plate velocity
significantly effects the flow and heat transfer.
The effect of magnetic field on the boundary layer flow over a stretching she...IAEME Publication
The boundary layer flow created due to a linearly stretching sheet in a nanofluid is studied numerically. The boundary value problem consisting of nonlinear partial differential equations are converted into nonlinear ordinary differential equations, using similarity transformation and are solved numerically using Runge-Kutta Fourth order method, with shooting technique. The transport equations include the effects of Brownian motion and thermophoresis.
MHD convection flow of viscous incompressible fluid over a stretched vertical...IJERA Editor
The effect of thermal radiation, viscous dissipation and hall current of the MHD convection flow of the viscous incompressible fluid over a stretched vertical flat plate has been discussed by using regular perturbation and homotophy perturbation technique with similarity solutions. The influence of various physical parameters on velocity, cross flow velocity and temperature of fluid has been obtained numerically and through graphs.
Non-NewtonianFluid Flow and Heat Transfer over a Non- Linearly Stretching Sur...IJERA Editor
This paper investigates the MHD flow and heat transfer of an electrically conducting non-newtonian power-law
fluid over a non-linearly stretching surface along with porous plate in porous medium. The governing equations
are reduced to non-linear ordinary differential equations by means of similarity transformations. These
equations are then solved numerically with the help ofRunge – Kutta shooting method. The effect of various
flow parameters in the form of dimensionless quantities on the flow field are discussed and presented
graphically.
Application of CAD and SLA Method in Dental ProsthesisIDES Editor
Placement of dental implants requires precise
planning that accounts for anatomic limitations and
restorative goals. Diagnosis can be made with the assistance
of computerized tomographic scanning, but transfer of
planning to the surgical field is limited. Precise implant
placement no longer relies upon so called mental-navigation
but rather can be computer guided, based on a three
dimensional prosthetically directed plan. Recently, novel CAD/
CAM techniques such as stereolithographic rapid prototyping
have been developed to build surgical guides in an attempt to
improve precision of implant placement. The purpose of this
paper is to discuss the use of scanning equipments to transfer
clinically relevant prosthetic information which can be used
for fabrication of stereolithographic medical models and
surgical guides. The proposed method provides solid evidence
that computer-aided design and manufacturing technologies
may become a new avenue for custom-made dental implants
design, analysis, and production in the 21st century.
The determination of the stress distribution around Pin-Loaded Holes in Mechanically Fastened Joints is presented to the Engineering Department, University of Technology - Jamaica
Effect on heat transfer and thermal development of a radiatively participatin...IAEME Publication
The paper deals with Simultaneous heat transfer by convection and radiation in a channel flow between two infinite black parallel plates is investigated. The effect of radiation on the heat transfer and the full thermal development of the flow is studied. The effect of scattering albedo, conduction-radiation
parameter and the optical thickness are examined.
Hertz Contact Stress Analysis and Validation Using Finite Element AnalysisPrabhakar Purushothaman
In general machines are designed with a set of elements to reduce cost, ease of assembly and manufacturability
etc. One also needs to address stress issues at the contact regions between any two elements, stress is induced when a load is applied to two elastic solids in contact. If not considered and addressed adequately serious flaws can occur within the mechanical design and the end product may fail to qualify. Stresses formed by the contact of two radii can cause extremely high stresses, the application and evaluation of Hertzian contact stress equations can estimate maximum stresses produced
and ways to mitigate can be sought. Hertz developed a theory to calculate the contact area and pressure between the two
surfaces and predict the resulting compression and stress induced in the objects. The roller bearing assembly and spur gear pair assembly is an example were the assembly undergoes fatigue failure due to contact stresses. This paper discusses the hertz contact theory validation using finite element Analysis.
Boundry Layer Flow and Heat Transfer along an Infinite Porous Hot Horizontal ...IJERA Editor
An analysis is made for the two-dimensional laminar boundary layer flow of a viscous, incompressible
fluid,along an infinite porous hot horizontal continuous moving plate. The governing system of partial
differential equations was transformed into ordinary differential equations before being solve by Natural
transformation. The effects of various physical parameters, such as Eckert number Ec , Prandtlnumber Pr ,
plate velocity α and heat source/sink parameter Sare presented and discussed. It is found that the plate velocity
significantly effects the flow and heat transfer.
MHD Free Convection from an Isothermal Truncated Cone with Variable Viscosity...IJERA Editor
This paper presents a study of MHD free convection flow of an electrically conducting incompressible fluid with
variable viscosity about an isothermal truncated cone in the presence of heat generation or absorption. The fluid
viscosity is assumed to vary as a inverse linear function of temperature. The non-linear coupled partial
differential equations governing the flow and heat transfer have been solved numerically by using an implicit
finite - difference scheme along with quasilinearization technique. The non-similar solutions have been obtained
for the problem, overcoming numerical difficulties near the leading edge and in the downstream regime. Results
indicate that skin friction and heat transfer are strongly affected by, both, viscosity-variation parameter and
magnetic field. In fact, the transverse magnetic field influences the momentum and thermal fields, considerably.
Further, skin friction is found to decrease and heat transfer increases near the leading edge. Also, it is found that
the direction of heat transfer gets reversed during heat generation.
Numerical simulation on laminar convection flow and heat transfer over a non ...eSAT Journals
Abstract
A numerical algorithm is presented for studying laminar convection flow and heat transfer over a non-isothermal horizontal plate.
plate temperature Tw varies with x in the following prescribed manner:
T T Cx w
n 1
where C and n are constants. By means of similarity transformation, the original nonlinear partial differential equations of flow
are transformed to a pair of nonlinear ordinary differential equations. Subsequently they are reduced to a first order system and
integrated using Newton Raphson and adaptive Runge-Kutta methods. The computer codes are developed for this numerical
analysis in Matlab environment. Velocity, and temperature profiles for various Prandtl number and n are illustrated graphically.
Flow and heat transfer parameters are derived. The results of the present simulation are then compared with experimental data in
literature with good agreement.
Keywords: Free Convection, Heat Transfer, Non-isothermal Horizontal Plate, Matlab, Numerical Simulation.
Numerical simulation of marangoni driven boundary layer flow over a flat plat...eSAT Journals
Abstract
A numerical algorithm is presented for studying Marangoni convection flow over a flat plate with an imposed temperature
distribution. Plate temperature varies with x in the following prescribed manner: where A and k are constants.
By means of similarity transformation, the original nonlinear partial differential equations of flow are transformed to a pair of
nonlinear ordinary differential equations. Subsequently they are reduced to a first order system and integrated using Newton
Raphson and adaptive Runge-Kutta methods. The computer codes are developed for this numerical analysis in Matlab
environment. Velocity profiles for various values of k, and temperature profiles for various Prandtl number and k are illustrated
graphically. The results of the present simulation are then compared with the previous works available in literature with good
agreement.
Keywords: Matlab, Marangoni Convection, Numerical Simulation, Surface Tension, Flat Plate.
EFFECT OF PARTICLE SIZE AND CHEMICAL REACTION ON CONVECTIVE HEAT AND MASS TRA...IAEME Publication
The present work deals with the effect of size of the nano-particle and the liquid like layer formed duo to the natural chemical reaction of the liquid with the metical particle. The particle size and the layer around the particle certainly alter the heat and mass transfer.
Effects of Variable Viscosity and Thermal Conductivity on MHD free Convection...theijes
A steady two-dimensional MHD free convection and mass transfer flow past an inclined vertical surface in the presence of heat generation and a porous medium have been studied numerically when the fluid viscosity and thermal conductivity are assumed to be vary as inverse linear function of temperature. The governing partial differential equations are reduced to a system of ordinary differential equations by introducing similarity transformations. The non-linear similarity equations are solved numerically by applying the Runge-Kutta method of fourth order with shooting technique. The numerical results are presented graphically to illustrate influence of different values of the parameters on the velocity, temperature and concentration profiles. Skin friction, Nusselt number and Sherwood number are also completed and presented in tabular form.
Analysis of mhd non darcian boundary layer flow and heat transfer over an exp...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
EFFECT OF SLIP PARAMETER OF A BOUNDARY-LAYER FLOW FOR NANOFLUID OVER A VERTIC...IAEME Publication
In this paper we analyze the effect of momentum slip, thermal slip and solutal slip on stagnation point flow of MHD nanofluid towards stretching sheet .The governing partial differential equation of flow, heat and mass transfer on considered flow are converted into the ordinary differential equations by means of similarity trans formations .The resulting equations are solved by the Runge-Kutta fourth order method with efficient shooting technique. Effects of various governing parameters on flow, heat and mass transfer are studied through the plots. The various numerical tables which are calculated and tabulated. A comparison of our present results with a previous study has been done and we found that an excellent agreement is there with the earlier results and of ours.
Transient Laminar MHD Free Convective Heat Transfer past a Vertical Plate wit...theijes
An analytical computation of the problem of nonlinear magneto-hydrodynamic flow with heat transfer characteristics is considered for an incompressible viscous, electrically conducting fluid past a vertical plate with transverse magnetic field applied normal to the surface. The dimensionless transient nonlinear governing boundary layer flow equations which are coupled partial differential equations are obtained. These are transformed to ordinary differential equations and solved using the Laplace transform method. The effect of the resulting parameters are analysed and compared with existing results in literature.
Effect of the Thickness of High Tc Superconducting Rectangular Microstrip Pat...IJECEIAES
In recent years, a great interest has been observed in the development and use of new materials in microwave technology. Particularly, a special interest has been observed in the use of superconducting materials in microwave integrated circuits, this is due to their main characteristics. In this paper, the complex resonant frequency problem of a superconductor patch over Ground Plane with Rectangular Aperture is formulated in terms of an integral equation, the kernel of which is the dyadic Green‟s function. Galerkin‟s procedure is used in the resolution of the electric field integral equation. The surface impedance of the superconductor film is modeled using the two fluids model of Gorter and Casimir. Numerical results concerning the effect of the thickness of the superconductor patch on the characteristics of the antenna are presented.
MODELING OF REDISTRIBUTION OF INFUSED DOPANT IN A MULTILAYER STRUCTURE DOPANT...mathsjournal
In this paper we used an analytical approach to model nonlinear diffusion of dopant in a multilayer structure with account nonstationary annealing of the dopant. The approach do without crosslinking solutions at
the interface between layers of the multilayer structure. In this paper we analyzed influence of pressure of
vapor of infusing dopant during doping of multilayer structure on values of optimal parameters of technological process to manufacture p-n-junctions. It has been shown, that doping of multilayer structures by
diffusion and optimization of annealing of dopant gives us possibility to increase sharpness of p-n-junctions
(single p-n-junctions and p-n-junctions within transistors) and to increase homogeneity of dopant distribution in doped area.
Modeling of Redistribution of Infused Dopant in a Multilayer Structure Dopant...mathsjournal
In this paper we used an analytical approach to model nonlinear diffusion of dopant in a multilayer structure with account nonstationary annealing of the dopant. The approach do without crosslinking solutions at the interface between layers of the multilayer structure. In this paper we analyzed influence of pressure of vapor of infusing dopant during doping of multilayer structure on values of optimal parameters of technological process to manufacture p-n-junctions. It has been shown, that doping of multilayer structures by diffusion and optimization of annealing of dopant gives us possibility to increase sharpness of p-n-junctions (single p-n-junctions and p-n-junctions within transistors) and to increase homogeneity of dopant distribution in doped area.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.