Metals are solid elements that are good conductors of heat and electricity. They can be classified as ferrous, which contain iron, or non-ferrous. Metals are rarely used in pure form and are often combined into alloys to improve properties. They are extracted through mining ores and smelting or electrolysis. Qualities like strength, malleability, and conductivity come from their molecular and crystalline structure. Common metals include iron, copper, aluminum, and alloys like steel, brass, and bronze. Each has distinct properties and applications.
Sheets Metal used in Manufacturing ProcessRishabh Singh
Presentaion is on how sheets metal are used in manufacturing process.
You get to know about how many types of steels are there and what are there types.
More than than it contains information about metals used in metallurgy.
Sheets Metal used in Manufacturing ProcessRishabh Singh
Presentaion is on how sheets metal are used in manufacturing process.
You get to know about how many types of steels are there and what are there types.
More than than it contains information about metals used in metallurgy.
Iron: A strong, hard magnetic silvery-grey metal, the chemical element of atomic number 26, much used as a material for construction and manufacturing, especially in the form of steel.
Steel: A hard, strong grey or bluish-grey alloy of iron with carbon and usually other elements, used as a structural and fabricating material.
its about iron metal used in architect used and its advantage and disadvantage ,fire proofing floor, samples, history and discovery of iron metal from earth crust,introduction, physical properties and chemical proerties.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Iron: A strong, hard magnetic silvery-grey metal, the chemical element of atomic number 26, much used as a material for construction and manufacturing, especially in the form of steel.
Steel: A hard, strong grey or bluish-grey alloy of iron with carbon and usually other elements, used as a structural and fabricating material.
its about iron metal used in architect used and its advantage and disadvantage ,fire proofing floor, samples, history and discovery of iron metal from earth crust,introduction, physical properties and chemical proerties.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
2. Metal Origins
Metals have been essential in the
development of civilisation
The word ‘metal’ comes from the ancient Greek
word metallon which means to mine, excavate
or extract from the ground
3. •Metals are…Solid at room temperature, except
mercury, which is liquid.
•Metals have… very high melting point.
•Metals are…shiny when they cut.
•Metals are…good conductors of heat and electricity.
•Metals are…usually strong & malleable so they can be
hammered into shape.
Metals
4. Classification of Metals
Metals are divided into two main
categories
Ferrous metals
○ Ferrous metals contain the element
iron, also known as ferrite (Fe)
Non-ferrous metals
○ Non-ferrous metals don’t contain iron
5. Alloys
Metals are rarely used in their pure form
Alloys are made by combining two or more
elements
This helps improve the working properties
and appearance
Brass and stainless steel
are common alloys
By combining certain elements, alloys
can be protected from oxygen
6. ORE
The Earth’s crust contains many types of rock
Metallic minerals are found naturally in rock or ore
Ore is obtained by mining, and the metals contained
within it are extracted
The method used for extraction depends on the
metal’s reactivity with air, water or acids
The more reactive the metal, the more expensive it is
to extract
7. Extraction Process
Once an ore is mined from the ground,
metal must be extracted before it is
processed into stock forms
Most metals are smelted in a blast furnace
Electrolysis is used to extract metals such
as aluminium
8. Smelting
Smelting is the process of extracting metals
from their ores in a blast furnace
Smelting is used for most industrial
metals such as iron and copper
Metals are drawn off in a liquid state
called ‘hot metal’ and the impurities
are removed
The blast furnace reaches about
1,700°C to extract iron from iron ore
9. Material Properties
Ductile metals
Will stretch without being damaged
Can be drawn or stretched out into long wires
Copper is highly ductile and can be
drawn into long, thin wires
Malleable metals
Can be hammered into a shape
without breaking
Can be rolled or pressed into sheets
easily but will deform if compressed
Name the malleable metal used to make foil
10. Hardness is the ability to withstand abrasion
The ability to withstand scratching Cast iron would be
described as hard but brittle
Toughness is the ability to absorb energy and not fracture
A tough material may scratch easily on the surface but
can withstand large impacts
11. Physical Structure of
Metal
The structure of metals helps explain its
properties
The crystalline structure of
metals can be modified
through heat treatments
The larger the grains;
the tougher and more
ductile the material
Large
crystals
Small
crystals
12. Molecular Structure of
Metal
The atomic structure of metals shows
the tight bonds between atoms
Strong bonds between the
ions and electrons give
metals strength and
high melting points
Positive ions in a sea of
free-moving electrons
make metals good
electrical conductors
13. Ferrous Metals
Ferrous metals contain iron and may rust
Iron and steel can corrode – this is known as
rust
Rust is a compound called iron oxide and is
formed
when iron and oxygen react in the presence of
moisture
Most ferrous metals are magnetic
14. Iron and Carbon
Steel combines iron and carbon which
can also be alloyed with other elements
Cast iron 2.4 - 4% carbon
Mild steel 0.05 - 0.3% carbon
Medium carbon steel 0.4 - 0.7% carbon
High carbon steel 0.6 - 1.5% carbon
Stainless steel Alloyed with: Chromium, nickel, magnesium
High speed steel Alloyed with: Chromium, tungsten, vanadium
Different element combinations and
ratios give different properties
15. PROPERTIES OF METALS
1. Strength - The ability of a material to stand up to forces
being applied without it bending, breaking, shattering or
deforming in any way.
2. Elasticity - The ability of a material to absorb force and flex
in different directions, returning to its original position.
3. Plasticity - The ability of a material to be change in shape
permanently.
4. Ductility - The ability of a material to change shape (deform)
usually by stretching along its length.
16. PROPERTIES OF METALS
5. Tensile Strength – The ability of a material to stretch without
breaking or snapping.
6. Malleability - The ability of a material to be reshaped in all
directions without cracking.
7. Toughness - A characteristic of a material that does not
break or shatter when receiving a blow or under a sudden
shock.
8. Conductivity - The ability of a material to conduct electricity.
9. Hardness – The ability of a material to resist scratching,
wear and tear & indentation.
17. FERROUS-METALS
1. Mild Steel
Composition: Iron alloy with 0.3% carbon
Properties: Malleable and ductile, and therefore bends fairly easily
Uses: nuts, bolts, screws, tubes etc.
Methods of Identification
Appearance: Bright drawn mild steel has a smooth, bright surface;
black mild steel is covered with a blue-grey oxide
Dropping: Gives out a ringing note
Grinding: Gives off a shower of long white sparks
Effect of Heating: Slightly tougher but little change
18. FERROUS-METALS
2. Tool Steel / cast steel / carbon steel
Composition: Iron alloy with 0.5%-1.5% carbon
Properties: Tough rather than hard, and fairly ductile
Uses: Springs and most tools such as hammer heads, drills, chisels,
shears etc
Methods of Identification
Appearance: Has a smooth skin of black oxide
Dropping: Gives out a high ringing note
Grinding: Moderate number of red sparks
Effect of Heating: Becomes hard and brittle
19. FERROUS-METALS
3. Cast iron
Composition: Iron alloy with 2%-4% carbon
Properties: Brittle, snaps before it will bend. Strong in compression
Uses: Vices, cylinder blocks for car engines, frames for most machines
Methods of Identification
Appearance: Grey with a granular surface
Dropping: gives out a dull note
Grinding: Gives off a few dull sparks
Effect of Heating: No change
20. Cast Iron
Cast iron has a relatively high carbon
content which makes it hard but
brittle
Ornate and complex designs are
possible
through the casting process, but it’s hard
to machine
Uses include manhole covers, vices,
G-clamps, radiators and post boxes
21. ADVANTAGES OF FERROUS METALS
1. High strength to weight ratio
it minimise the substructures cost, which beneficial in poor ground
condition.
22. ADVANTAGES OF FERROUS METALS
2. High quality material
readily available worldwide in various certificate grades.
3. Speed of construction
4. Versatility
steel suits range of construction methods & sequences.
5. Modification & repair
6. Recycling
7. Durability
8. Aesthetics
steel has a broad architectural possibilities.
23. DISADVANTAGES OF FERROUS METALS
1. Costly waste
2. High cost of final finishing & polishing
3. Environmental issue
24. Stainless Steel
Stainless steel has a high resistance to
corrosion, staining and friction
It’s one of very few ferrous metals which do
not require a coating to make it resistant to
corrosion
Stainless steel is an alloy of
carbon, chromium, nickel
and manganese
These elements give the
characteristic properties
of hardness and toughness
25. Mild Steel
Mild steel is tough, ductile and
easy to machine, braze and weld
A relatively cheap material used
in engineering and construction
e.g. girders, nails, nuts, bolts
These properties make it particularly
suitable for car bodies and bike frames
26. Non-Ferrous Metals
Non-ferrous metals do not contain iron
and most are not magnetic
How else do they differ from
ferrous metals?
Aluminium, copper and brass
are all non-ferrous metals
List some household items
made from non-ferrous metals
27. Oxidization
Non ferrous metals, such as copper and
bronze, don’t rust but may oxidise
Oxidising can be caused by corrosion
or weather exposure over a period of time
The thin layer of tarnish that appears on
the surface of the metal is called a patina
The green-turquoise patina occurring
on copper is called Verdigris.
28. Properties
Non-ferrous metals are often more
expensive than ferrous metals owing to
their desirable properties which include:
Lightweight
Good conductivity
Ductile and malleable
Resistant to corrosion
29. Aluminium
Aluminium is a hugely versatile material
used in a myriad shapes and forms
Aluminium ore known as bauxite, is the most
common ore found in the Earth’s crust
A light grey metal, efficient thermal insulator
and doesn’t degrade when recycled
What other properties make it suitable
for use in an aircraft fuselage?
List some common uses for
aluminium
30. Copper
Electrical conductivity is how easily an
electrical current can flow through a metal
Copper is such an efficient conductor, it’s most
common use is in electrical cabling
31. Brass
Brass refers to a range of copper and zinc alloys
with differing properties
The hardness of brass depends
on the ratio of copper to zinc
Its machinability and corrosion
resistance can be adjusted
by adding lead or aluminium
Used for low-friction applications such
as padlocks, gears, valves and bearings
as well as musical instruments
Prized for its decorative properties, it is hard,
ductile, resistant to wear and is antimicrobial
32. Bronze
32
Bronze is an alloy consisting primarily of copper,
commonly with about 12–12.5% tin and often with
the addition of other metals (including aluminium,
manganese, nickel, or zinc) and sometimes non-
metals, such as phosphorus, or metalloids such as
arsenic or silicon. These additions produce a range
of alloys that may be harder than copper alone, or
have other useful properties, such as strength,
ductility, or machinability.
33. Merits and De-Merits
33
Merits
• Easy to fabricate, i.e., machining, casting,
welding, forging and rolling.
• High corrosion resistance and low density.
• Possess very good thermal and electrical
conductivity.
De-Merits
• No Magnetic Attraction
• Light-weight
• Cost