Mehtab Niazi is an electrical engineer with over 10 years of experience designing, installing, and maintaining electrical systems. He has extensive experience managing electrical projects from conception to completion, including for oil and gas facilities. Niazi is proficient in AutoCAD, Microsoft Office, and electrical system software. He aims to deliver projects on time and on budget while ensuring safety, quality, and sustainability.
Master of Engineering in Power Electronics and Drives. Actively Looking for Job opportunity to work in core domain. Have Industry Experience in Bharat Heavy Plate and Vessels Ltd. Published and presented an IEEE paper on Control of Doubly Fed Induction Generator connected to Variable Speed Wind Turbine in Technological Advancements of Power and Energy at Amritapuri, Kerala
Master of Engineering in Power Electronics and Drives. Actively Looking for Job opportunity to work in core domain. Have Industry Experience in Bharat Heavy Plate and Vessels Ltd. Published and presented an IEEE paper on Control of Doubly Fed Induction Generator connected to Variable Speed Wind Turbine in Technological Advancements of Power and Energy at Amritapuri, Kerala
I cordially invite everybody on the 23rd of January, 2016, Santo Domingo Chile, to a book presentation that includes poems by Antonio Skarmeta, my music,and the work of many talented artists. Antonio Skarmeta will be giving a talk, and I will be attending along with thirteen of the artists.
If anybody is interested in obtaining this book, please let me know and I will connect you with Paula Baraona, the director of this project.
I have spent 7+ years pursuing a career as Sr. Electrical designer. Along with sr. designer, I am departmental representative of ISO 9001:2015 to management representative; I provide technical support to service and sales team.
My specialties:
+ Electrical Design
- Electrical Schematics, Single line Diagram, BOQ Preparation
- Selection of various Electrical component Switchgear, Drive, Motor, PLC, HMI, Comm. Protocol
(Profibus, Profinet, CANbus, CANopen, Ethernet, EtherCAT, ModBUS, Devicenet)
- Selection of various automation sensors
- Selection of power electronic component I.G.B.T, Diode, Thyristor (SCR).
- Transformer Sizing, HT-LT Cable sizing and Estimation
- Voltage Drop calculation, Short circuit Analysis - MELSHORT2
- IEC, UL, NEMA, IEEE Standards understanding
- Electrical Panel CE | Ul Certification Expert
- Prepare or maintain design, testing, or operational records and documentation.
- PLC-ladder logic preparation, SAP-ERP bill of material preparation.
- Preparing Troubleshooting and Maintenance Manual.
- Excellent Understanding of Hydraulic and Pneumatic circuit for Electrical |Automation controlling view
- Tech support to sales and service team
- Costing and Estimation
- Cross functional Co-ordination
- Panel Schedules
+ IOT (Internet of things)
+ Process Improvement
• Cable joints up to 36kv.MV, LV, cables routing & termination, Earthling,
• Electrical Panels, control systems, low current
implementation,
• Installation, testing, commissioning and Servicing of U.P.S, (LEVER UPS, ITALY.
HBL, INDIA, DUBAS UPS, INDIA)
• Installation, testing, commissioning and Servicing of U.P.S, Stabilizer, Battery charger,
• Preparations of Sales Quotations and Preparations of Tenders, Meeting with Clients.
• Generating the New Customers and preparing the targets to sales Engineers and Follow up the payments and raising the invoices.
• Raising the Profit margin to the Department through the AMC and sailing of Products
1. Mehtab Niazi
Electrical Engineer
PERSONAL SUMMARY:
A competent electrical engineer with a comprehensive knowledge of designing developing
and maintenance electrical systems and components to required specifications, focusing on
economy, safety, reliability, quality and sustainability. A consistent track record of
successfully completing projects from the concept and detail of the design through to
implementation, testing and handover
PROFESSIONAL EXPERIENCE:
TRG WORLD (Pvt.) Ltd
(The Resource Group)
ELECTRICAL ENGINEER
(In charge of Power Team) Nov 2013 – Present
Prepared and reviewed engineering plans, specifications, project schedules, designs, circuit
diagrams, and estimates for construction and maintenance of power generation projects.
Planned and estimated costs on projects.
Extensive experience of planning, project management, design & client liaison
Organizing Electrician Duty schedules.
Reading electrical design specifications and technical drawings.
Preparation of Electrical procedures for installation test & commissioning.
Manage Power, UPS and Generator teams
Making sure all electrical engineering projects are fit for purpose.
Manage quarter maintenance and services of online UPS’s, AVR, Isolation transformers,
Fire alarm system, CCTV cameras and Server racks etc.
Liaising with and monitoring third party contractors.
Negotiating with suppliers and purchase items at optimum cost.
Experience of interpreting specifications and preparing technical proposals.
A strong track record in delivering projects on time and within budget.
Managing projects from conception, pre-production through to completion.
Managing project budgets and keeping costs down.
Overseeing the maintenance of projects after completion.
Responsible for the completion of all documentation.
Producing Test Plans and reports.
2. Prepare contract documentation for procurement services and materials.
Manage project schedules and budgets, and obtain permits for operations.
Maintained effective working relationships with field crews, contractors, vendors, outside
agencies, the public and city staff members.
Lightning protective system
CMC (Pvt.) Ltd
(Computer Marketing Company)
SENIOR SERVICE ENGINEER Nov 2012 – Nov 2013
Company Profile: Master Distributer of APC UPS,
Emerson UPS, IBM server, Printronix.
Job responsibility include installation, configuration, maintenance and Fault diagnosis of
APC UPS, Emerson UPS, Power Work, STS, MBS, AVR, Isolation transformer and etc.
Update the firmware and calibration of all APC and Emerson UPS.
SNMP card configuration of all APC and Emerson UPS’s.
Using test equipment & hand tools to diagnose locate & fix electrical problems.
Tracing, diagnosing and rectifying electrical faults in UPS, electrical Panel and etc.
Carrying out electrical installation and maintenance work.
Carrying out new project work, design and installation.
Load survey and Load Calculation
Interpreting work instructions, drawings and schematic diagrams.
Identifying customer requirements, making models and prototypes of products.
Using computer-assisted engineering and design software.
Attending technical meetings on site.
Reading electrical design specifications and technical drawings.
Attending meetings, writing reports and giving presentations to managers and clients.
Report to the manager Technical services for the status daily call logs.
Make engineering calculations in connection with field and office assignments.
Performed highly specialized design, research, and analysis on a project-by-project basis.
3. NETLINE (Pvt.) Ltd
PROJECT ENGINEER
Company Profile: Master Distributor of SOCOMEC UPS Jan 2011 – Nov 2012
(France), Solar Systems and Electrical Contractors
Job responsibility include Electrical Designing of UPS room, Power room, 3 phase panels,
DB's and etc.
Load survey and Load Calculation.
Dealing the customer and handling the customer problems.
Resolve complain by Tele-conversation or by routing an engineer to the following sites.
Manage the team of service engineers.
Manufacturing and designing electrical switches of third party.
Investigate problems and recommend solutions.
Ensure compliance with safety requirements and standards procedures.
Coordinated projects with other departments, outside agencies, contractors and
consultants.
PROJECT:
Prime Industries City: Gujranwala
500kva UPS, Isolation Transformer, UPS room, two Battery banks and DB.
State Bank of Pakistan City: Karachi
Three UPS of 60kva, Isolation Transformer, DB and all electrical work.
HBL City: Karachi and Lahore
5 Modules UPS of 60kva and all data center power work.
PPL City: Sui (Baluchistan)
Two UPS of 30kva, Isolation Transformers, AVR and 3phase panel.
GSK City: Karachi, site area
Two UPS of 250kva and all Electrical works
4. GEMNET (Pvt.) ltd
SERVICE ENGINEER
Company Profile: Master Distributer of Eaton/ Feb 2007 – Dec 2010
Power ware UPS and Electrical Contactors
Job responsibility include installation, configuration, maintenance, fault diagnosis of
EATON(1kva to 250kva) ups, MGE (1kva to 11kva) ups, APC (1kva to 12kva) ups, Electrical
panels and etc.
Visit the complaint sites for fault diagnosis in the operation of the UPS and Electrical panels.
Update the firmware of UPS (10kva to 250kva).
Installation of SNMP card, Hot sync card (Parallel card), IP assigning, UPS monitoring
software installation.
Report to the manager Technical services for the status daily call logs.
Lying of cable of single core, three core and four core (cable size 2.5mm to 240mm).
Manufacturing and designing electrical switches.
Connecting wires to circuit breakers, transformers and other components.
Travelling to locations on site and working both indoor and outdoor.
Using tools & testing equipment including oscilloscopes, ammeters & test lamps.
Administrative work like maintaining records and files and preparing reports.
Load survey and load calculation
Prepare electrical drawings and specifications.
PROJECTS:
State Bank of Pakistan City: Hyderabad
4 UPS of 60kva, Isolation Transformers, AVR, PDU, STS, Automatic panels and all electrical works
PPL City: TANDOADAM
UPS of 110v, Isolation transformer, STS, MBS, Electrical Panels, racks etc.
BHP (Oil and Gas Plant) City: DADU
UPS, MBS panel, Isolation Transformers and electrical panels
TAPAL TEA City: Karachi
Complete Data center
NIB Bank City: All Pakistan
Complete data center
ENAR (Oil and Gas plant) City: Mango peer
UPS and electrical panels
5. ACADEMIC QUALIFICATIONS:
B-Tech (Pass) Subject: Electrical From: Karachi
Indus Institute of Higher Education University 2007 – 2009
DAE Subject: Electrical From: Karachi
Aligarh Institute of Technology 2004 – 2007
Matriculation Subject: Science From: Karachi
Board of Secondary Education Karachi 2002 - 2004
TECHNICAL SKILLS:
Installation, maintenance and troubleshooting of online, offline, and line interactive UPS’s,
PDU, MBS switches, STS switches, Battery banks, Network cards (SNMP), Hot sync Cards,
Firmware upgrades and network racks.
Installation and maintenance of AVR and isolation transformer.
Electrical Designing and load calculation of UPS room, power room, 3 phase panels, DB’s
and etc.
Installation, maintenance and troubleshooting of solar system, Fire alarm system and CCTV
cameras.
Power factor unit
Lightning protective system
Software expertise of APC, Emerson, Eaton/ Power ware and Socomec UPS.
Knowledge of Building Services.
Ability and also willingness to work in all weather conditions. Excellent customer facing and
communication skills.
Ability to prepare Operation & Maintenance Manuals.
COMPUTER SKILLS:
Auto CAD
MS office
Adobe Photoshop
Computer hardware and software
Installation and operation of XP, Windows 7 and 8.
Internet and e-mail
Browsing and surfing
6. PROJECTS IN OIL/ GAS AND POWER PLANTS:
BHP (Oil and Gas) City: DADU (Sindh)
Project period 3 month
PPL (Oil and Gas) City: TANDOADAM (Sindh)
Project period 1 month
ENAR (Oil filter Plant) City: Mango peer near Karachi
Project period 1 month
PPL (Oil and Gas) City: Sui (Baluchistan)
Project period 1 month
SUPARCO Pakistan City: Karachi
Project Period 2 month
PERSONAL DETAIL:
REFRENCE:
Available on Demand
MEHTAB NIAZI
House no: 20/2/2-B, Sheet no.21,
Model colony, Karachi
Mobile no: 0345-3100822,
E-Mail: mehtab.niazi@yahoo.com