The document is a resume for Nitin Niwariya, an electrical engineer with over 4 years of experience designing electrical systems for infrastructure projects like airports, buildings, and IT parks. He has skills in designing low and medium voltage electrical systems, extra low voltage systems like security, data, and building management systems. He is proficient in AutoCAD, REVIT, and has worked on projects with Larsen & Toubro and Security Printing and Minting Corporation of India.

1. NITIN NIWARIYA
Sr. Design Engineer (Electrical)
E-mail ID : nitinniwariya09@gmail.com
Mobile : +91-9893690778 ,+91-7415452224
Career-Objective:
I am looking for a good position in a prestigious company where previous design skills and capabilities can be put
to efficient use. I possess effective organizational skills and the ability to supervise a team and develop the final
output.
Summary of skills:
 Technically sophisticated professional with 4 years of electrical & electronics design experience in detail
designing of Extra Low voltage (ELV) systems , Medium & Low voltage electrical works in infrastructure
projects e.g. Airports, Residential & Commercial Buildings, IT parks, Hospitals , etc.
 Proficient in preparing Bill of Quantity (BOQ), AutoCAD-Drawings, Specifications, Design Basis Report
(DBR) & Design-Schematics for following extra low voltage systems for tender & operating projects
 CCTV System
 Access control system
 Data & voice Structured cabling
 Public addressing system
 Building Management system
 Fire Alarm System
 Nurse call system
 Preparation of input /output (IO) summary for Substation automation system (SAS) or
Scada System with control philosophy & networking scheme of remote terminal units
(RTUs).
 Proficient in preparing Bill of Quantity (BOQ), AutoCAD-drawings & Specifications for low voltage &
medium voltage electrical installation with following design activity.
 Total electrical load estimation e.g. HVAC load, Fire fighting load, lighting load, power load,
PHE load, IT server / UPS load.
 Sizing of transformer, Diesel Generator & UPS system.
 Preparation of single line diagrams (SLDs) for lighting & Power.
 Preparation of Master single line diagram (MSLD) for complete electrical distribution from
source of supply.
 Cable Tray sizing & cable tray routing .
 Sizing of under floor system (raceways) & their routing.
 Earthing Calculation & Earthing layout preparation.
 Short circuit Calculation & Breaker selection.
 Effective co-ordination in REVIT software with other building services i.e. HVAC, FPS & PHE to have clash
free design.
 Maintaining good relationship with vendors, clients & ensuring cost effective design.
 Providing technical support to site execution team.
 Review vendor drawings and ensuring their compliance with project requirements.
 Taking error free work from Draftsman to have good construction drawings.
 Familiar with engineering codes & standards e.g. NFPA, NBC, IS, NEC, IEC etc.
 Supervised all subcontractor work to ensure compliance with client requirements.
 Document and submit all conducted work reports to clients.

2.  Document all minutes of meeting, CSR report from client and site team, training data, project team list,
design documents e.g. Design Basis report (DBR), BOQ, Specifications, released construction drawings
for internal and external ISO Audit.
Academic Credentials :
July 2011........ Master of Technology (M.Tech) in Electrical engineering with specialization of Measurement &
Instrumentation from Indian Institute of Technology (IIT) Roorkee – India & secured 87%.
July 2009........ Bachelor of Engineering in Electronics & Instrumentation from SGSITS Indore India & secured
73.65%.
Professional-Experience:
Organization: Security printing & minting corporation of India Limited Hoshangabad (M.P.) -INDIA
Duration: Oct 2014 till now
Designation: Officer Technical – (E& I)
Project Description: Extension of existing Security paper manufacturing unit at Hoshangabad (M.P.)
Responsibilities:
 Monitor the installation of Scada System required for 33 /11kV substation.
 Monitor the CCTV installation work & review drawings & documents submitted by contractor.
 Monitor the data & voice installation work & review drawings & documents submitted by contractor.
 Monitor the site electrical installation work e.g. lighting, cable laying, Conduiting & cable tray installation
etc.
Organization: Larsen & Toubro Limited ( Construction-Division) at EDRC Mumbai Cluster - India
Duration: Sept 2012 – Oct 2014
Designation: Senior Design Engineer (Electrical) & promoted to Assistant Manager (Electrical)
1. Integrated Commercial Development at Seawoods railway Station Navi Mumbai- India
Responsibilities:
 Preparation of cable tray layouts & co-ordination with other services.
 Preparation of power socket layouts, lighting layouts, earthing layouts & electrical equipment layout.
 Preparation of Single line diagrams for lighting, power & earthing.
 Short circuit Current calculation and cable sizing for Distribution boards, Medium voltage panel & for low
voltage panels etc.
 Preparation of Load schedule and cable schedule for electrical equipments.
 Space planning inside substation & electrical panel layouts with panel sizing.
 Preparation of detailed electrical distribution scheme from 33kV to 11kV and 11kV to 415V with required
feeder protections using numerical & electromechanical relays.
 Preparation of Input /Output summary for Substation automation system (SAS) or Scada system for
controlling & monitoring the breaker during normal power supply & normal power failure.
 Preparation of bill of quantity (BOQ) and specifications for electrical items e.g. HT & LT Panels,
distribution boards, cable trays ,HT & LT Cables, power sockets ,HT & LT switchgears, light fixtures,
transformers , Diesel generator and all allied items used with sufficient numbers of spares.
 Co-ordination with mechanical team for desired electrical loads for their machines (e.g. chiller, pumps,
AHUs, Fans etc.) and design required MCCs.
 Prepare periodic follow-up reports of work site progress and update to client.
 Attending client meeting to discuss design related issue and getting approvals for the drawings.
 Worked on REVIT software for effective coordination between MEP Services.

3. 2. Chhatrapati Shivaji International Airport (Terminal 2) Mumbai –India
Responsibilities:
 Prepared design basis report and specification of Scada system.
 Prepared IO summary for controlling & monitoring of the incomers & outgoing breakers of panel inside
utility building and substations.
 Prepared control philosophy of electrical distribution network from 11Kv to 415 v outgoings during EB
power supply & EB Power failure and scheme of load shedding & load sharing.
 Prepared departure way power layout, power SLDs and under floor raceways layouts.
 Participated in testing & commissioning of Scada System for utility building and substations.
 Interfacing of energy meters with Scada system on Modbus communication protocol.
 Prepared cable schedules for HVAC equipment e.g. AHUs, CAHUs, exhaust Fans.
 Short circuit analysis and load flow analysis is done in ETAP software for utility building & all
substations.
3. Air India 14M Engine Test cell facility for SAFRAN Cenco International (U.S) at Nagpur -India
Responsibilities:
 Design of data - voice system and their networking scheme.
 Conduits and raceways layout preparation for data –voice points and power points.
 Structured cabling for Data and voice system.
 Preparation of power layouts & lighting layouts.
 Trench layouts for power cables and optical fiber cable laying details.
 Cable tray routing and tray sizing.
 Co-ordination with civil & MEP services in REVIT software for clash free work.
4. Reliance Data Center (IDC-5) at Dhirubhai Ambani knowledge city (DAKC) Mumbai
Responsibilities:
 Prepared tender BOQ for Scada system which includes detailed quantity of Input /Output points. RTUs,
optical fiber cable, communication cable with control and networking scheme.
 Prepared tender BOQ for electrical works which includes Transformers, DG sets, cable trays , MV and LV
panels, HT & LT cables ,power sockets, UPS, Distribution boards, Raceways, earth strips, conduits, wires
,Bus duct etc . As per the tender document received from client.
 Prepared tender drawings for electrical works.
5. Reliance Cash & Carry shopping complex at Mumbai
Responsibilities:
 Prepared tender stage design basis report and Bill of quantity (BOQ) for extra low voltage system which
includes the Analog CCTV system, Access Control & attendance recording system, Public addressing
system, Intruder alarm system, Metal detector & Boom barriers etc.
Organization: Larsen & Toubro Limited ( Construction-Division) at EDRC -Chennai Headquarter -India
Duration: Aug 2011 – Sept 2012
Designation: Design Engineer (Electrical)
6. Jipmer Hospital at Pondicherry –India
Responsibilities:
 Preparation of drawings for Nurse calls system, Data & Voice system & Building management system.
 Preparation of BOQ for the Data & voice, Building management system, Nurse Call system.
7. IT Park for COGNIZANT at Siruseri Chennai–India
Responsibilities:
 Preparation of drawings as Good for construction for IP based CCTV System, Access control system,
Public Addressing system, Data & Voice system & Building management system.

4.  Preparation of complete BOQ for extra low voltage (ELV) system.
8. Knowledge City Varodara –India & L&T Finance office Building at Kalina Mumbai -India
Responsibilities:
 Preparation of drawings for under floor raceways for Power & data cables.
 Technical support to site team for effective co-ordination between electrical & data cable installation to
have clash free work.
 Power sockets layout & lighting layouts with single line diagrams.
 Data & voice point layouts with networking schematics.
IT SKILLS:
 Programming Languages : C
 Operating System : Windows XP , Windows
 MS Office : Proficiency in entire MS Office
 Software Packages : REVIT, AutoCAD and ETAP
 Internet: Good understanding of internet tools.
Personality Traits :
 Ability to learn quickly is my forte that has helped me successfully managing various jobs given.
 Ability to work with team of dedicated professionals for achieving the deadlines for execution of work.
 Excellent communication, listening & motivating skills.
Trainings & Certificates:
 Certification on Supervisory Development Program (SDP) for effective communication & co-ordination
between site & design team in L&T.
 Certificate of appreciation given by client GVK for good electrical team work at Mumbai International
Airport Limited (MIAL) Terminal-2.
 Attended In house training at L&T on Design aspects of High rise building’s electrical installation.
 Attended In house training at L&T on “Design Philosophy of Extra Low Voltage (ELV) System”.
 Attended In house training at L&T on “Concept Design of Scada System”.
Language:
 English : Fluent ,read write & speak
 Hindi : Mother tongue
Personal Details:
 Date of Birth : 09 March 1988
 Marital Status : Single
 Communication Address : Room no.21,Type –III ,Near Kamgar kalyan Kendra SPM colony phase-2
Hoshangabad ,M.P. 461005 (India)
 Mobile No. : +91-9893690778 ,+91-7415452224
 E-Mail ID : nitinniwariya09@gmail.com
 Passport No. : L9572433
Availability:
 Available within 30 days from the date of confirmation of job.