Fiber media converter is a cost-effective solution to this issue. It dramatically increases the bandwidth and transmission distance of the local area network (LAN) by allowing the use of fiber and integrating new equipment into existing cabling infrastructure.
In data communication,
Transmission media is a pathway that carries the information from sender to receiver.
We use different types of cables or waves to transmit data.
Data is transmitted normally through electrical or electromagnetic signals.
Synchronous optical networking (SONET) is a standardized digital communication protocol that is used to transmit a large volume of data over relatively long distances using a fiber optic medium. With SONET, multiple digital data streams are transferred at the same time over optical fiber using LEDs and laser beams.
A fact sheet on Single Pair Ethernet evolving from the humble beginnings in 1970 in Palo Alto to a 100 GBASE T1 and further environment in the near future
A ‘Baseband’ Network is one in which the cable or other network medium can carry only a single signal at any one time.
A ‘Broadband’ network on the other hand can carry multiple signals simultaneously, (using a discrete part of the cables bandwidth for each signal.)
As an example of broadband network, consider the cable television service that you probably have in your home. Although only one cable runs at your TV, it supplies you with dozens of channels of programming at the same time.
Twisted copper or fiber optic cabling for the data centerAngelina Li
When planning for a long-term cabling solution for your data center, it is important to consider future transmission speeds and the infrastructure to support them.
In data communication,
Transmission media is a pathway that carries the information from sender to receiver.
We use different types of cables or waves to transmit data.
Data is transmitted normally through electrical or electromagnetic signals.
Synchronous optical networking (SONET) is a standardized digital communication protocol that is used to transmit a large volume of data over relatively long distances using a fiber optic medium. With SONET, multiple digital data streams are transferred at the same time over optical fiber using LEDs and laser beams.
A fact sheet on Single Pair Ethernet evolving from the humble beginnings in 1970 in Palo Alto to a 100 GBASE T1 and further environment in the near future
A ‘Baseband’ Network is one in which the cable or other network medium can carry only a single signal at any one time.
A ‘Broadband’ network on the other hand can carry multiple signals simultaneously, (using a discrete part of the cables bandwidth for each signal.)
As an example of broadband network, consider the cable television service that you probably have in your home. Although only one cable runs at your TV, it supplies you with dozens of channels of programming at the same time.
Twisted copper or fiber optic cabling for the data centerAngelina Li
When planning for a long-term cabling solution for your data center, it is important to consider future transmission speeds and the infrastructure to support them.
This paper has been developed to provide an understanding the role of fibre optic communication technology associated with PON network infrastructure in next generation of Ultrafast Broad Band (UBB) architecture in Australia. Inside are details of technical strategies for many different PON infrastructures.
Optical fiber broadband is a technology that converts electrical signals carrying data to optical signals and sends the optical signals through transparent glass fibers. The signal conversion process is completed through the optical modems installed on both ends of the optical fiber. Among various transmission media for the broadband network, optical fiber is an ideal one, which features in large transmission capacity, high transmission quality, long repeater spacing and low loss.
Optical fiber access technology provides users with high-speed bandwidth of 10 Mbps, 100 Mbps and 1000 Mbps that can be directly connected with the main crunodes of the internet. With high speed access to local area network (LAN) and high speed interconnection with internet, optical fiber access technology is applied mainly to LANs for business groups and intelligent residences. This article will introduce five common access modes of optical fiber.
Various types of dsl broadband internet connectionsAJAL A J
Stands for "Digital Subscriber Line." DSL is a communications medium used to transfer digital signals over standard telephone lines. Along with cable Internet, DSL is one of the most popular ways ISPs provide broadband Internet access.
When you make a telephone call using a landline, the voice signal is transmitted using low frequencies from 0 Hz to 4 kHz. This range, called the "voiceband," only uses a small part of the frequency range supported by copper phone lines. Therefore, DSL makes use of the higher frequencies to transmit digital signals, in the range of 25 kHz to 1.5 MHz. While these frequencies are higher than the highest audible frequency (20 kHz), then can still cause interference during phone conversations. Therefore, DSL filters or splitters are used to make
This paper has been developed to provide an understanding the role of fibre optic communication technology associated with PON network infrastructure in next generation of Ultrafast Broad Band (UBB) architecture in Australia. Inside are details of technical strategies for many different PON infrastructures.
Optical fiber broadband is a technology that converts electrical signals carrying data to optical signals and sends the optical signals through transparent glass fibers. The signal conversion process is completed through the optical modems installed on both ends of the optical fiber. Among various transmission media for the broadband network, optical fiber is an ideal one, which features in large transmission capacity, high transmission quality, long repeater spacing and low loss.
Optical fiber access technology provides users with high-speed bandwidth of 10 Mbps, 100 Mbps and 1000 Mbps that can be directly connected with the main crunodes of the internet. With high speed access to local area network (LAN) and high speed interconnection with internet, optical fiber access technology is applied mainly to LANs for business groups and intelligent residences. This article will introduce five common access modes of optical fiber.
Various types of dsl broadband internet connectionsAJAL A J
Stands for "Digital Subscriber Line." DSL is a communications medium used to transfer digital signals over standard telephone lines. Along with cable Internet, DSL is one of the most popular ways ISPs provide broadband Internet access.
When you make a telephone call using a landline, the voice signal is transmitted using low frequencies from 0 Hz to 4 kHz. This range, called the "voiceband," only uses a small part of the frequency range supported by copper phone lines. Therefore, DSL makes use of the higher frequencies to transmit digital signals, in the range of 25 kHz to 1.5 MHz. While these frequencies are higher than the highest audible frequency (20 kHz), then can still cause interference during phone conversations. Therefore, DSL filters or splitters are used to make
Creately offers series of professional network diagram templates which you can use instantly to create your own network diagrams. Draw network diagrams with Creately network diagram templates. (CISCO, LAN, WAN, Topology)Many types of network diagram templates can be found on our diagram community. Just click on the use as templates button to immediately start modifying it using our online diagramming tools.
This is my mini project on bandwidth. Its the best i could do and if theres any enquires on my powerpoint slide show, please let me know lol :)
thankyou.
In this presentation, the Ricardo explains the two types of network diagram - activity on arrow and activity in node, and makes some considerations on the network diagram.
CCNA ppt designed on project remote connectivity using frame relay, and many more... best for project purpose. anyone want project will also contact me..
To Download this PPT click on the link below:-
http://www29.zippyshare.com/v/14569917/file.html
Networking
Computer network
Types of network
Personal Area Networks (PANs)
Local Area Networks (LANs)
Metropolitan Area Networks (MANs)
Wide Area Networks (WANs)
Classification of Network Architecture
Client-server architecture
Peer-to-peer architecture
Hybrid architecture
Network topology
Bus Topology
Star Topology
Ring Topology
Mesh Topology
Tree Topology
Hybrid Topology
Overview of VPN protocols.
VPNs (Virtual Private Networks) are often viewed from the perspective of security with the goal of providing authentication and confidentiality.
However, the primary purpose of VPNs is to connect 2 topologically separated private networks over a public network (typically the Internet).
VPNs basically hook a network logically into another network so that both appear as one private local network.
Security is a possible add-on to VPNs. In many cases it makes perfectly sense to secure the VPNs communication over the unsecure public network.
VPN protocols typically employ a tunnel where data packets of the local network are encapsulated in an outer protocol for transmission over the public network.
The most important VPN protocols are IPSec, PPTP and L2TP. In recent years SSL/TLS based VPNs such as OpenVPN have gained widespread adoption.
Explore Types of Media Converter and Protocol.pptxVERSITRONINC
A fiber optic media converter is used to connect fiber optic cables with copper cables and other non-fiber devices within the network. Fiber media converters facilitate the conversion of electrical signals to optic signals. VERSITRON’S Fiber Optic Media Converters enable the conversion of signals between an Ethernet device with cat5 or cat6 cable and fiber optic cable. Know about Fiber Optic Media Converter Standards and Protocols here.
A Closer Look Into Fiber Optic Media ConverterSun Telecom
A fiber optic media converter is a popular networking device that helps connect fiber optic cables with copper cables and other non-fiber devices within the network. This article will provide some knowledge about media converters.
Fiber media converter is a cost-effective solution to overcome the bandwidth and distance limitations of traditional network cable. It dramatically increases the bandwidth and transmission distance of the local area network (LAN) by allowing the use of fiber and integrating new equipment into existing cabling infrastructure.
Types of Media Conversion in Local Area NetworksVERSITRONINC
A Local area network (LAN) is a network where several devices are connected in one physical location such as buildings, offices, homes, etc. Although it may sound simple, the LAN may feature a challenging layout with multiple types of cables, switches, routers, access points, and several other components. All these components ensure the connection of the device to web servers, internal servers, and other LANs through wide area networks.
Serial-to-fiber Media Converters and Their Role in Industrial Ethernet Networ...VERSITRONINC
The Ethernet network extension is often done to accommodate long distance data transmission requirements. To achieve the same, serial-to-fiber media converters are utilized. The serial-to-fiber media converters are the devices that enable serial communication between the DTE and DCEs and further extend the reach via fiber optic transmission cables. This post introduces you to serial-to-fiber media converters and their role in industrial Ethernet network monitoring and extension.
Fiber optics in-buildings infrastructure paper - OEA- LebanonKSU
This review paper discusses the benefits of fibre broadband and considerations for real estate developers in Lebanon; it compares different FTTx network architectures, the standardization of building network elements, the need for local legislations and describes typical FTTH deployments worldwide.
Executive SummaryThe purpose of this report is to design a moder.docxgitagrimston
Executive Summary
The purpose of this report is to design a modern efficient network solution that will benefit the Continuous Corporation’s global enterprise operations in the US, Canada and Mexico. As a division of a Fortune 500 manufacturer, Continuous Corporation currently handles the sales and marketing, finance and accounting, distribution and logistics of the packaging materials used in packaging cereal boxes, cigarette cartons, ice cream containers, and must report its diverse department’s results to the parent company.
Currently, Continuous Corporation does not have the infrastructure to link supply chain vendors with marketing and customer service, logistics, finance, and senior management. The solutions proposed within this report will expose senior management to a wide array of distributed network technologies that will provide manufacturing and distribution centers the ability to keep in close contact with sales and marketing, notifying them immediately of inventory availability. Finance and Accounting will have up-to-the-minute information on the financial health of this division. Logistics will have updates on the availability of trucking resources for fulfilling customer orders.
A major finding indicates that Continuous Corporation
is in need of replacing the time-shared mainframe computer and antiquated billing system that will no longer be supported by the corporate office. The IT department of Continuous Corporation is looking at designing and creating a cost efficient billing system internally that will extend throughout the United States, Canada and Mexico. The system will provide to the company a system entailing payment processing including credit card and electronic fund transfers, point-of-sale invoicing, sales management, revenue reporting, commission tracking for sales representatives, inventory management and will also support multiple languages.
As internal staff within the company, we are familiar with the current networking and have management onsite to reduce preliminary work. There will be no issues with hidden costs or legal problems and confidentiality will be adhered to per company’s policies. Costs will be lowered as we will provide services onsite at Continuous Corporation while designing the system. We will be able to provide a high quality system as we can provide one hundred percent of our time to this project which will reduce any delays.
This report presents recommendations that allow Continuous Corporation to remain successful for years to come.
About Ethernet and its Benefits to Continuous Corporation
Originally specified in the standard, IEEE 802.3, Ethernet is a transmission medium cable that is often used in local area networks (Rouse, Ethernet, 2006). Modern Ethernet allows many computers to connect to a central hub or router via a network
card. The use of Ethernet is fairly versatile as it can be used in many network topologies. Often referred to as the backbone of LANs, Ethernet is essentiall ...
With the requirements placed on data center increasing rapidly, the ability to flexibly adapt to future demands is tremendously crucial for data center managers. Copper cabling has developed itself to cope with the fierce competition fo telecom field, if you are interested, you should take a look at this PDF.
Understanding Different Cabling Technologies.pptxCabling in DFW
Learn the fundamentals of cabling technologies! This presentation will teach you the basics of understanding different types of cabling technologies. Start your journey now!
Sheet1YearM 12-14M 15-17M 18-20M 21-24M 25-24M 35-49M 50-64M 65 or OlderF 12-14F 15-17F 18-20F 21-24F 25-24F 35-49F 50-64F 65 or Older2012503294214582313483329238762630101809245804710906725979523371827874133599967253377189145393312755120135295112032141862442623286538136280115131636968528541928656327945730961060386661121463768866639
Sheet2
Sheet3
Research Title:Cable Modem
Introduction:
Cable TV providers provide sports news, presentations, entertainment and real-time music. Videos are embedded in cable TV in a market environment where the video is set to replace data and text in many cases. Religion, food, travel, medicine and weather are specialized television shows. Cable TV has all of them. The ability to combine these offers with one-stream offers will not be replaced. The Internet is good for playback and user-generated content, but the cable TV ad package has obvious benefits for viewers.
Cable-based industry-based advertising is accepted by viewers as a trade-off with a significantly higher cost of direct purchase, providing a sustainable cable TV business model. Cable TV has great value because people can watch channels that they may not see as part of the package.
It aggregates video content in a way that does not work in the music industry. People want to create their own music packages, but the video is much more complex. Assembling in the way that the cable television industry provides is very sophisticated and does not resemble the music industry at all. What a good show for one year is not good the next day. The ability to turn back and forth gives people the ability to change viewing habits, without the rhythm of individual download options is of great value to users.
The cable television network has evolved to support digital video and bi-directional services such as high-speed data, video-on-demand and telephone. Around the world there is a trend for cable operators to increase their investments in their networks.
Cable modem business is operated by industry dynamics related to expanding information and entertainment services at home. Trends increase wireless connectivity to access video and data over the Internet by using a variety of digital devices at home.
The Internet is the only network protocol to move forward. When cable providers build more high-bandwidth video capabilities, they will build on Internet protocols. The pace of service delivery continues to increase. Continue a variety of devices consumed in the increase. This change increases the bandwidth and demand consumption of cable modem products.
Cable operators demand advanced networking technologies and software solutions. The increase in the volume and complexity of signals transmitted over broadband networks as a result of the transition to a full digital network on demand, requires cable operators to deploy new technologies. Transport technologies rely on IP.
This allows cable operators to pay for video, audio and data effectively over a shared network.
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches to meet next generation Metro, Data Center and Enterprise network requirements. FS S5850 is designed based on the fourth generation high-end scalable chipset , which support L2/L3/Data Center/Metro features. The FS S5850 comes with complete system software with comprehensive protocols and applications to facilitate rapid service deployment and management for both traditional L2/L3 networks and Data Center networks.
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches to meet next generation Metro, Data Center and Enterprise network requirements. FS S5850 is designed based on the fourth generation high-end scalable chipset , which support L2/L3/Data Center/Metro features. The FS S5850 comes with complete system software with comprehensive protocols and applications to facilitate rapid service deployment and management for both traditional L2/L3 networks and Data Center networks.
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches to meet next generation Metro, Data Center and Enterprise network requirements. FS S5850 is designed based on the fourth generation high-end scalable chipset , which support L2/L3/Data Center/Metro features. The FS S5850 comes with complete system software with comprehensive protocols and applications to facilitate rapid service deployment and management for both traditional L2/L3 networks and Data Center networks.
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches to meet next generation Metro, Data Center and Enterprise network requirements.
The FS S5850 Series are cost-effective Ethernet access and aggregation platform to Enterprise, Data Center and Metro application. The FS S5850 Series Switches currently includes four configurations: S5850-48S2Q4C/S5850-48S6Q/FS S5850 and S5850-32S2Q.
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches
to meet next generation Metro, Data Center and Enterprise network requirements. FS
S5850 is designed based on the fourth generation high-end scalable chipset , which support L2/L3/Data Center/Metro features.
Loose tube vs. tight-buffered fiber optic cableTeresa Huang
Selecting the right type of fiber optic cable boils down to the applications and the installation. This post will introduce and compare two fiber optic cable types based on different cable constructions—loose-tube and tight-buffered fiber optic cable.
40 g short distance transmission solutionsTeresa Huang
There are various types of 40G QSFP+ transceivers available on the market, such as 40GBase-SR4, 40GBase-CSR4, 40GBase-LR4, etc, and each of them is designed to support long or short distance transmission. In this post, I am going to introduce some effective 40G short-reach transmission solutions, including 40GBase-SR4, QSFP-40G-CSR4, QSFP-40G-CR4.
Choosing 24 fiber mpomtp cabling for 40100 g migrationTeresa Huang
Running 40G requires 8 fibers, with 4 fibers each transmitting at 10Gbit/s and 4 fibers each receiving at 10Gbit/s. Running 100G requires a total of 20 fibers, with 10 transmitting at 10Gbit/s and 10 receiving at 10Gbit/s. Both scenarios call for high-density MPO-style connectors, which can be either 12-fiber or 24-fiber. However, 24-fiber MPO/MTP cabling is often considered to be the better solution for 40/100G migration. Why? Reading this post and you will get the reasons.
In order to respond to improve data security in high-performance networks, many physically discrete fiber connection systems have emerged. Among these systems, keyed LC connectivity system is a good choice.
Have you chose the right rack mount fiber enclosure for projectTeresa Huang
Rack mount fiber enclosure—a high-density cable management tool which can provide easy-to-manage environment and protection for fiber optic cables, has been well received by data center managers. There are various types of rack mount fiber enclosures available in different design and for different applications on the market.
Introduction to two common qsfp+ cable types for 40 g ethernetTeresa Huang
In order to satisfy the increasing demand for greater bandwidth and the growing amount of data transmission in today’s enterprise data center and networking environments, various kinds of high-performance and reliable cables are designed, like QSFP+ cables.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
1. WHITE PAPER
FS.COM White Paper | Media Converter – the Migration Tool for Network Connectivity
In today’s rapidly expanding data network, the need to drive higher speeds closer to the user is an
ongoing challenge. However, upgrading and replacing equipment is costly, many organizers can’t
afford it. So how can we meet the increasing demand for bandwidth in the existing network
infrastructure? Fiber media converter is a cost-effective solution to this issue. It dramatically
increases the bandwidth and transmission distance of the local area network (LAN) by allowing the
use of fiber and integrating new equipment into existing cabling infrastructure. To better
understand fiber media converter, this post will give an overview of it.
Basic Concept of Fiber Media Converter
Fiber media converter (shown in the figure 1), also known as Ethernet media converter, is a simple
networking device that connects two dissimilar media types, such as unshielded twisted pair (UTP)
with fiber optic cabling. Although it was introduced to the industry years ago, fiber media converter
is still an increasingly important device in interconnecting fiber optic cabling-based systems with
existing copper-based, structured cabling systems. Besides, fiber media converter can be used in
metropolitan area network (MAN) access and data transport services to enterprise customers.
Figure 1. Fiber Media Converter
Media Converter – the
Migration Tool for
Network Connectivity
2. WHITE PAPER
FS.COM White Paper | Media Converter – the Migration Tool for Network Connectivity
Advantages of Fiber Media Converter
Fiber media converter is a low cost robust device that allows the network planners to expand the
reach of the network beyond typical twisted pair cable constraints. It easily adds additional
buildings associated with the “main office” and expand existing optical or copper transport
networks. With 3-R capabilities, long distances can be managed with no impact on throughput.
Furthermore, fiber media converter is not complex device, not requiring a new skill for engineers to
install and manage. Thus, the current IT/Engineering staff can deploy this solution quickly.
Common Fiber Media Converter Types
Fiber media converters support many different data transmission protocols including Ethernet, Fast
Ethernet, Gigabit Ethernet, T1/E1/J1, DS3/E3, as well as multiple cabling types such as coax, twisted
pair, multimode and single-mode fiber optics. There are two common fiber media types —
copper-to-fiber media converter and fiber-to-fiber media converter. The following part will
introduce them respectively.
Copper-to Fiber Media Converter
When two network devices with copper ports should be connected over extended distances via
fiber optic cabling, copper-to-fiber media converter comes in handy. It is the key to integrating fiber
into a copper infrastructure, making it possible to migrate a local network to fiber while extending
the productive life of existing infrastructure (see figure 2 below). This kind of fiber media converter
supports the IEEE 802.3 standard and provides connectivity for Ethernet, fast Ethernet, Gigabit and
10 Gigabit Ethernet devices. It can also support 10/100 or 10/100/1000 rate switching, enabling the
integration of equipment of different data rates and interface types into one seamless network. Fast
Ethernet media converter, Gigabit fiber media converter and 10G media converter are three
commonly used types of copper-to-fiber media converter.
Figure 2. Copper-to-Fiber Media Converter Application
3. WHITE PAPER
FS.COM White Paper | Media Converter – the Migration Tool for Network Connectivity
Fiber-to-Fiber Media Converter
It is obvious that copper-to-fiber media converter promotes and brings down the price for the
deployment of local area network. But what can fiber-to-fiber media converter do? Fiber-to-fiber
media converter is used to extend network distance by providing connectivity between multimode
and single-mode fiber, between different “power” fiber sources and between dual fiber and single
fiber. This media converter is ideal for campus area network or other applications requiring the
distance advantages of single-mode fiber, and can extend a Gigabit Ethernet connection up to 125
km for MAN (metropolitan area network) applications. Mode converter and WDM OEO transponder
are two common types of fiber-to-fiber media converters. The application of fiber-to-fiber media
converter is shown in figure 3.
Figure 3. Application of fiber-to-fiber media converter
Conclusion
To sum up, fiber media converter is an economical solution to overcome the bandwidth and
distance limitation of traditional network cable, which has been widely used in today’s network. It is
the easiest way to achieve the conversion between copper to fiber or fiber to fiber. There are a
variety of fiber media converters provided in FS.COM, including copper-to-fiber converter, and
fiber-to-fiber converter. Besides we also have many high-quality transceiver modules, like Cisco
GLC-SX-MMD, and fiber patch cables, like LC fiber cables, in stock. If you need any related products,
Welcome to FS.COM to choose the ideal one for your network.
4. WHITE PAPER
FS.COM White Paper | Media Converter – the Migration Tool for Network Connectivity
Contact Us
Manufacturing R & D (China)
Eastern Side, Second Floor, Science &
Technology Park, No.6, Keyuan Road,
Nanshan District, Shenzhen 518057,
China
Tel: +86 (755) 8300 3611
Fax: +86 (755) 8326 9395
Email: sales@fs.com
APAC Office (Hong Kong)
1220 Tung Chun Commercial Centre,
438-444 Shanghai Street, Kowloon,
HongKong
Tel: +(852) 817 636 06
Fax: +(852) 817 636 06
Email: sales@fs.com
North America (United States)
331 Andover Park East Ste330, Tukwila,
WA 98188,United States
Tel: +1 (253) 277 3058
Fax: +1 (253) 246-7881
Email: sales@fs.com
London Office (United Kingdom)
Third Floor 207 Regent Street, London,
W1B 3HH, United Kingdom
Tel: +44 (020) 3287 6810
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or
implied, concerning any equipment, equipment features, or service offered or to be offered by FS.COM.
FS.COM reserves the right to make changes to this document at any time, without notice, and assumes no
responsibility for its use. This information document describes features that may not be currently available.
Contact a FS.COM sales team for information on feature and product availability.
Follow us
LinkedIn
Twitter
Facebook
G+
Pinterest
Youtube
Blog
