Mark Jones has over 36 years of experience as a highly skilled mechanical fitter and technician supervisor. He has worked in heavy industry for the past 10 years as a mechanical team leader. He has strong communication, teamwork, and time management skills. He is proficient in risk assessments, safe work procedures, and has knowledge of production processes.
Expert Ready-Mix Concrete, Production Development, Erecting, Maintenance by checklist, Auditing to reduce cost, Quality Control, design mixes, Experience 30 years
Honorably discharged U.S. Army veteran. Bachelors degree 1992 State University of New York College at Buffalo, bilingual. Service Engineer since 2001 on oilfield construction projects on land, inland and offshore multi-million dollar operations.
Expert Ready-Mix Concrete, Production Development, Erecting, Maintenance by checklist, Auditing to reduce cost, Quality Control, design mixes, Experience 30 years
Honorably discharged U.S. Army veteran. Bachelors degree 1992 State University of New York College at Buffalo, bilingual. Service Engineer since 2001 on oilfield construction projects on land, inland and offshore multi-million dollar operations.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
1. Mark R Jones
Mechanical Fitter/Technician Supervisor
44 Charlbury Road
Pallister Park
Middlesbrough
Cleveland
TS3 8JT
Telephone:- 01642 285546
Mobile:- 07414881824
Email:- ryandsj@sky.com
PERSONAL PROFILE :-
I am a highly skilled mechanical fitter with 36 years experience of which the last 10
years as a mechanical team leader,
working in all aspects of heavy industry with a keen interest in all aspects of
mechanical engineering I have completed a 4 year apprenticeship within British Steel.
A good team player but not afraid to work alone, with strong communication skills
and a willingness to learn. I also have a full clean driving license which I am willing
to use for work.
KEY SKILLS:-
• Competent in doing Risk Assessments and Safe Working Procedures.
• Working knowledge of the production line process and the necessity to
complete work on time.
• Qualified in laser alignment through pruftechnick on the rotalign pro.
• Knowledge and experience of striping down overhauling pumps ensuring that
they meet the required build quality standard.
• Completed a team building event successfully, which gave me the insight to
the importance of team working and communication to achieving objectives.
• Working knowledge of using SAP for ordering parts ect.
• IT literate
• Excellent Timekeeping and production management skills
• Excellent Team leader and Team builder (& Team player)
• Ensuring working standards of the plant are maintained.
• Working on piped services i.e. Coke oven gas, propane, steam, oxygen.
• Complete strip down and overhaul of various pumps and valves.
• Tubed and Alpha Laval plate heat exchanger cooling systems.
• Various coupling changes.
• Gear box overhauling and re fitting.
• Hydraulic and Pnuematic systems.
CERTIFICATION
- SITE SAFETY PASSPORT
- COSHH
- BA TRAINING
- CRANE LIFT SUPERVISOR
2. - LASER ALIGNMENT, PRUFTECHNICK ON ROTALIGN PRO.
- CITY AND GUILDS MECHANICAL ENGINEERING
- CITY AND GUILDS MECHANICAL FITTER/TECHNICIAN
- COUNTER BALANCE AND REACH FORKLIFT TRUCK LICENSE
- MWEP (Cherry picker) & SCISSOR LIFT LICENSE
EMPLOYMENT & EDUCATION HISTORY:-
Mechanical Team Leader: SSI January2012-Present
• Managing a team of cross functions comprising of fitters, boilermakers,
electricians and laborer’s.
• Sourcing spares and equipment.
• Writing and issuing of Daily Permits To Work.
• Writing of Safe Working Procedures and Risk Assessments and Safety Audits.
• Prioritising and supervising tasks.
• Giving toolbox talks before commencing work.
• Reading Engineering drawings.
• Lift supervisor on lifts using overhead and mobile cranes.
Mechanical Supervisor: SBV July 2011-January2012
Managing a team of cross functions comprising of fitters, boiler makers,
electricians and labourers within SSI steelworks to bring systems back on on
restart of plant.
Warehouse Clerk: Tesco Teesport June 2010-July 2011
My duties where Stock integrity, bringing wagons and containers into the
depot. Assigning a bay or the product to suit and updating warehouse stock
levels
Mechanical Team Leader: Corus (British Steel) Nov 1999-March 2010
Managing a team of cross functions comprising of fitters, boilermakers
electricians and laborers, Sourcing spares and equipment, Writing and issuing
of daily Permits to work.Writing of safe working Procedures and Risk
Assessments and safety audits. Prioritising and supervising tasks. Giving
toolbox talks before commencing work. reading engineering drawings. Lift
supervisor on lifts using overhead and mobile cranes.
Mechanical Fitter: British Steel (Corus) Services Sept 1980 –Oct 1999
• Ensuring working standards of the plant are maintained.
• Working on piped services i.e. Coke oven gas, propane, steam, oxygen.
• Complete strip down and overhaul of various pumps and valves.
• Tubed and Alpha Laval plate heat exchanger cooling systems.
• Various coupling changes.
• Gear box overhauling and re fitting.
• Hydraulic and Pnuematic systems.
Apprenticeship: 1976 – 1980
Within British Steel (Corus) Attending Longlands College to gain a pass in
Mechanical Engineering. During my apprenticeship I carried out various courses
including fabrication, lathes, pumps and valves rebuild, key fitting, locking devices,
coupling alignment, marking out, hydraulic systems
Southlands Secondary School:- 1970-1976
3. CSE & GCSE in Maths English
Science & more
References available on request