1. DENIS DOOLEY
13,Meadowland rise
Cudworth
Barnsley. S72 8JQ
Telephone 01226780620 mob 07804866130
denisdooley@yahoo.com
MECHANICAL ENGINEER
LIMITED COMPANY or P.A.Y.E
PROFILE
An abundance of mechanical fitting experience, working in power stations(Gas & nuclear) Bio-
ethanol, steelworks, cement-works and coalmines. A mechanical Engineer who will take
responsibility and complete the task on time, attend meetings, organise, plan, write method
statements and risk assessments. Or if a mechanical fitter is required one who can do the work,
a person who enjoys his work and is not fazed by the size of the project. In the last few months I
have worked at Tata steel on their Scunthorpe and Redcar sites (via Duttons/ Maske) and also
worked on a wind farm in Scotland building a mobile concrete batching system with 3 x 100t
silo`s (MFH).
EMPLOYMENT EXPERIENCE.
Title Held, Name of Company Dates of employment
Mechanical Supervisor TEI ltd (seconded to Vivergo) 2015 OCT-2016 FEB
From October to January I was scoping/organising the work, checking Ra/ms etc for the 2016
TAR for Vivergo (Hull, B.P. site). I then supervised a team of Hertel contractors to complete the
Mechanical section of the TAR, the last 2 weeks I was tapping out/ commissioning and attending
lessons learnt meetings.
Title Held, Name of Company Dates of employment
Mechanical Supervisor. (Cavendish Nuclear) 2015 APR- 05/07/15
Working as a Mechanical Supervisor on the Dungeness B nuclear power station. We Carried out
repairs/ overhaul on the gas circulators. (outage)
Title Held, Name of Company Dates of employment
Supervisor, TEI Ltd, VIVERGO, HULL 2014-2015 apr
Working as a mechanical supervisor, I had been working with the Vivergo management team
in the installation of 3 conveyors (2 x Guttridge, 1 x Tramco). I supervised 20 men in the outage
for TEI Ltd. I had been involved from the early planning stages, through installation and
completed all the commisioning.
Title Held, Name of Company Dates of employment
Supervisor, TEI Ltd, Saltend cogeneration 2006 - 2014 APR
Working as a mechanical supervisor for TEI Ltd at the cogeneration plant at Saltend.
Tei Ltd had obtained the maintenance contract from Doosan Babcock and I was asked to
tupe over by SCCL`s Mechanical engineer. I was responsible for a small team of fitters
working on all balance of plant equipment and ensured all works were carried out in strict
2. accordance with statutory guidelines and health and safety regulations. During the
outages I was responsible for between 8-12 fitters and riggers and had total control of
completing between 150 and 200 work orders and ensuring that all the work was
completed on time.
• I rewrote all TEI`s mechanical method statements and risk assessments.
• Was asked by the manager to be part of the health and safety forum.
• Was seconded by SCCL as a mechanical technician for a period of 2 years to organise
the planned maintenance and defects that had to be completed, this also including
altering and updating over 200 ra/ms.
• Due to further cutbacks, for the last 2 years during normal production times I have had
to be one of the fitters as well as still carrying out my supervisory duties.
• Worked on all the equipment shown below ( in Doosan section).
Title Held, Name of Company Dates of employment
Supervisor, DOOSANBABCOCK, Saltend Cogeneration 2001 - 2006
During this time I was a working supervisor and worked on the following items.
• Cooling towers including changing gearboxes and blades, overhauling vac pumps
• motor alignments.
• Sulphuric and hydrochloric acid systems.
• HRSG including changing Hp/Ip boiler feed pumps
• Maintaining TCA fans
• Control, lube, jacking and seal oil systems
• Stator water.
• Condenser incl vac system.
• CW/CCW systems
• AGI systems
Title Held, Name of Company Dates of employment
Mechanical Supervisor, MFH Ltd (Leeds) 1992 - 2001
Working as a mechanical fitter for the first 3 years and then promoted to supervisor. The work
varied substantially throughout Europe.
• Annual outage at Castle Cement-works. Being in charge of Between 40-50 mechanical staff.
• Steelworks.
• Outages at Ferrybridge Power station on the turbines, also planned maintenance and b.o.p.
• Working in France, Ireland and various sites throughout GB, Dismantling, Removal and re-
installation of plastic injection equipment/ bottling plants etc
• Repositioning conveyor systems for building circuit boards, with use of laser aligning,
skates/jacks, align & level, forklift, cranes, incl transfer to different sites.
• ICI. Chemical plants
• Paper mills
• British Sugar
2
3. Title Held, Name of Company Dates of employment
Shift charge mechanical engineer, British Coal 1979-1992
Assisting the engineer in the day to day running of the colliery and being responsible for all the
mechanical workings with approx 50fitters and 4 foreman fitters.
Duties and responsibilities included:
• Supervision and organisation of the examination and testing of a wide range of mining
machinery.
• Reading and acting on reports
• Ordering equipment / parts for installation and maintenance
• Attending production, development, installation and overtime meetings.
• Dealing with major breakdown situations.
Foreman fitter 1978-1979
Aide to the assistant mechanical engineer, in the running of a section of the mine. Responsible
for up to 10 fitters ensuring all breakdowns were repaired as a matter of urgency and
maintenance and examinations were completed.
Chargehand fitter 1976-1978
Assisting the foreman, responsible for 3 fitters on 3 shifts
Mechanical fitter 1974-1976
Responsible for the installation, examination, testing and repair of all mechanical equipment
below ground.
Apprentice fitter 1970-1974
Completed a comprehensive 4 year apprentiship, including day release to the technical college.
PROFESSIONAL DEVELOPMENT
A.M.E.M.E Honours (Association of mining, electrical and mechanical engineers)(HNC equiv)
Mechanical technicians certificate
Mechanical craft certificate
City & Guilds hydraulics and pneumatics certificate
City & Guilds Advanced hydraulics and pneumatics certificate
4 year craft apprentiship.
IOSH managing safely 2001, and 2015
Alstom trade test and safety certificate.(2014)
AMEC Foster Wheeler Trade and safety test (27/04/16)
Safety passport
CSCS Gold card
Abrasive wheels
Confined space
Slinger/signaller
Safety harness
Clean driving licence
Overhead cranes
Nuclear clearance (CTC No obtained)
Asbestos awareness.
