This document contains a resume for David Martin Noble, who has over 13 years of experience as a mechanical technician and supervisor in heavy industry. He has worked on various projects around the world installing, maintaining, and repairing industrial machinery and equipment. His qualifications include a City & Guilds diploma in mechanical engineering as well as safety and first aid training. He is seeking new opportunities as a mechanical fitter or technician.
Ken Rose Machinery Movements are a long established business for machinery and factory moves in Europe. You can relocate machinery tools and equipments by our skilled and experienced staff. Our services can be supplied to industrial clients across both Europe and the UK.
Plumett overhead cable rollers are designed for stringing ABC cable(Aerial Bundled Cables).
Overhead Cable Rollers :
*Mounted on the pole by meads of a ratchet operated nylon strap, fully adjustable to the pole diameter.
*Cable rollers made from cast aluminium fitted with ball bearings and zinc plated steel frame.
*Suitable for straight lines, inner and outer angle cable pulling.
Thorne & Derrick stock an extensive range of cable pulling and laying equipment for underground (trench), duct and overhead cable installations.
T&D UK distribute the complete range of Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
Ken Rose Machinery Movements are a long established business for machinery and factory moves in Europe. You can relocate machinery tools and equipments by our skilled and experienced staff. Our services can be supplied to industrial clients across both Europe and the UK.
Plumett overhead cable rollers are designed for stringing ABC cable(Aerial Bundled Cables).
Overhead Cable Rollers :
*Mounted on the pole by meads of a ratchet operated nylon strap, fully adjustable to the pole diameter.
*Cable rollers made from cast aluminium fitted with ball bearings and zinc plated steel frame.
*Suitable for straight lines, inner and outer angle cable pulling.
Thorne & Derrick stock an extensive range of cable pulling and laying equipment for underground (trench), duct and overhead cable installations.
T&D UK distribute the complete range of Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
I am a qualified highly experienced Mechanical Fitter, who comes to you with a track record of successfully using tools and computer software to repair & maintain mining machinery and mechanical equipment. Overall, I worked in this field for more than 20 years, and is comfortable working in a highly critical, fast paced environment which has shifting priorities. Multi-skilled and diligent team member and leader, I possess strong technical and problem solving skills with the ability to work in confined spaces, remote areas and challenging conditions. I offer my 100% flexibility to work various rosters on a FIFO basis with a proven track record of achievement in consistently promoting and adhering to workplace safety regulations. Giving training to local national workforce. As a true all-rounder, I have experience in the latest industrial and mining hydraulic power systems, mechanical parts rebuilds and fabrication. I possesses the required level of enthusiasm and energy needed to ensure that machines continue to run smoothly, and operate efficiently.
1. DAVID MARTIN NOBLE
MECHANICAL FITTER / TECHNICIAN
AVAILABILITY: TO BE ARRANGED
16 LAYDEN DRIVE, SCAWSBY,DONCASTER,SOUTH YORKSHIRE .DN5 8UY . UK.
Tel Mobile: +44 (0) 7581739969
► Tel Home: +44 (0) 1302 – 759003
► Email: davidnobleexdons@hotmail.co.uk
► Mobility: Full & Clean UK Drivers License
Career Profile:
An experienced Mechanical Technician in Heavy Industry, Rotating equipment, Auxiliary Plant equipment
and Installations. A strong 'Team Player' with a hands on approach, I enjoy sharing my experiences and skills
with others to solve problems encountered on the job. I have supervisory experience working with foreign
nationals and also have experience working in hostile weather conditions, both hot and cold. Detailed below
is the last 13 years of my experience. I have also worked for many years in the Coal Industry underground,
where I served my time as an apprentice and obtained my City and Guilds diploma in Mechanical
Engineering. Previous employment details can be produced on request.
Qualifications:
Wakefield Technical College:-
► City & Guilds: (4 yrs) Mechanical Engineering – Levels 2,3,4,5 – Pass
► City & Guilds: (2 yrs) Motor Mechanic – Vehicle Maintenance – Levels 1,2,3 – Pass
► City High School Diploma
► OSHA Construction Ind – 30 hr Safety, 20 hr Hazmat Training & First Aid Advanced
13 Year Employment History:
Feb 2015 – Present: Rema Tip Top
Mechanical Supervisor: My duties involve the supervision of the installation of conveyors, frame work
roller drums, bearings, gravity tension units, skirts, ploughs conveyor belts, vulcanizing and mechanical
joints. Hot and cold repairs, drum lagging, food quality belts and special belts, high wall and chevron.
2014 – 2015: Bemo USA, Qatar
Fabrication Supervisor: Fabricating secondary fixings in a library and fabricating the fixings in the
workshop, then installing them on site. Various other contracts in Doha with Bemo.
2010 – 2014: Outotec, UAE, Abu Dhabi
Mechanical Supervisor: Emal Phase 1 and 2 Project Aluminium Plant. The installation of smelting plant
conveyor systems, hoppers, silos, crushing and compactor machinery, vertical mill, rodding mill modifying
2. machinary. As well as mono rail system, anode cooling system, industrial doors and shutters, compactor,
Neidler rotating equipment, pitch tank and htm. Also piping, ducting and pitch tank commissioning work and
working to tight schedules and in very hot climate conditions.
2008 – 2009: HYDRO/QATALUM.MESAIEED QATAR.
Mechanical Technician / Supervisor: The installation of a smelting and carbon plant vertical mill,rodding
mill of rotating equipment and auxiliary plants furnace, conveyor systems and mono rail. Also vertical mill,
silos, hoppers, modifying and redesigning ducting and piping, working to tight schedules, pov and
commissioning work and working in very hostile climate conditions.
2007 – 2008: Granite Technical Services, UK & Europe
Mechanical Fitter: Shut down work, maintenance and servicing gas, steam and electric turbines and
commissioning work and installing new machinery to time limits for General Electrics USA throughout the
UK and Europe.
2007: General Dynamics, Fairbanks, Alaska
Diesel Mechanic / Plant Fitter: Retro fit of various extreme cold weather kits to engines, transmissions,
electrical & comms systems etc. Implementation of full reset program, performing reconditioning of all
major components, replacement of driveline parts etc to tight schedule working 7x12hr shifts.
2006 – 2007: Granite Technical Services, UK
Mechanical Fitter: Shut down work, maintenance servicing gas, steam and electric turbines and installing
new and refurbished machinery for General Electrics USA throughout the U.K. and Europe, working to
extreme dead lines.
2005 – 2006: GTSI, Various UK Sites
Mechanical Fitter: Shut down work on gas, electric and steam turbines, maintenance and servicing work,
troubleshooting and commissioning work and installing new machinery for General Electrics USA.
2004 – 2005: Ingersoll Rand, Beijing, China
Mechanical Fitter: Installing, building and commissioning milling machine manufactured the year before
for Chinese Motor Industry and troubleshooting any problems that occurred.
2003 – 2004: Ingersoll Rand, Rockford, Illinois, USA
Mechanical Fitter: Mechanical Fitter, Building and installing milling machines and commission work. Also
fabrication work and troubleshoot problems and dismantling and shipping to China.
2002 – 2003: Flint, Michigan, USA
Mechanical Fitter: Building and installing assembly lines for General Motors. Also Commissioning and
troubleshooting assembly machinery.
2001 – 2002: Total Refineries, Antwerp, Belgium
3. Mechanical Fitter: All aspects of day to day running of refinery, maintenance work, servicing, shut down
work, commissioning work and troubleshooting refinery problems.
2000 – 2001: Exon Mobil Refineries, Antwerp, Belgium
Mechanical Fitter: All aspects of day to day running of refinery, maintenance work, servicing, shut down
work, commissioning work and troubleshooting refinery problems.
2000: BP Refinery, Grangemouth, UK
Mechanical Fitter: All aspects of day to day running of refinery, maintenance work, servicing, shut down
work, commissioning work and troubleshooting refinery problems.
Hobbies & Interests:
I enjoy all sports with Rugby League in particular, as being ex-professional with Wakefield Trinity Hull FC
and Doncaster. I also like History, Travelling and different cultures and foods.
References:
Personal and professional references are available on request.