The scope of work shall include design, engineering, procurement, supply, fabrication, Inspection, packing, transportation to site, testing, calibration and commissioning of all instrumentation equipment, cables, pipes, auxiliaries and erection hardware necessary for completion of Instrumentation & Automation work for the solar power plant.

1. Resume
Name: Manoj N. Ahire
Designation: Lead Engineer (SCADA)
Educational Qualification:
Bachelor of Computer Science (North Maharashtra University).
Professional Experience:
Systech Solutions Pune- June 2007 to May 2011.
TAS India Private Limited Pune- June2011 to till date.
Work and Responsibilities:
Solar Power Plants:
The Supervisory Control and Data Acquisition (SCADA) system interface between the operator and the
equipment controls. It provides alarming, monitoring, trending and logging capability and Supervisory
control of all facilities equipment that is required to keep the Plant running.
The computer based Supervisory Control and Data Acquisition (SCADA), is a real time system.
It will be designed to provide advance warning and alarm indication either by direct monitoring or
taking over an alarm indication.
The scope of work shall include design, engineering, procurement, supply, fabrication, Inspection,
packing, transportation to site, testing, calibration and commissioning of all instrumentation
equipment, cables, pipes, auxiliaries and erection hardware necessary for completion of
Instrumentation & Automation work for the solar power plant.
System configuration drawing for PLC SCADA based control system for 5MW, 10MW, 24MW and
35MW solar power Plants in India.
• Solar PV Power plant scada development.
• Communication between Inverters or PV Rooms to Scada room or Main control room.
• Communication between HT/LT panel and Scada.
• Communication between Transformers and Scada.
• All kind of SCB’s communication with scada.
• Weather station and Pyranometer communication with scada.
• Weekly, Daily, Monthly and yearly report generation over scada.
• Real time Trends and Historical trends.
• Alarm and Events.
• Design wireless SCB monitoring system using RF (Radio frequency) devices.
• Design Telemetry system for SLDC.
• Design Remote Monitoring system (RMS) for solar power plant.
• Design Centralized Monitoring system (CMS) for entire solar power plant.
• Schneider EM6400 energy meter Installation and Interfacing with sixnet RTU using
RS485 protocol.

2. • Display the status of 33KV HT and 415V LT panels feeders & there Faults/alarms on
Scada as Per I/O’s list.
• Display/ Monitor/ records the parameters of Inverter, SCB, UPS, Battery Charger
Weather station, MFM’s, Numerical relays, Power Transformer annunciator.
• Communication between SCADA system and all Inverters or PV rooms, SCB, MFM,
Weather station, UPS, Numerical Relays, Transformers and other systems through open
protocol.
• Control (closing/tripping) of incomers / bus couplers/contactor and outgoings of 33KV
HT, 415V LT Panels as specified in I/O list.
Oil and Gas Industries:
• HMI Display, Dynamic shapes, shape sequence and custom faceplate development and
Validation.
• GUS display and sub pictures development and validation.
• LCN display and sub pictures development and validation.
• Configuration of SCADA database for Third party devices.
• Factory Acceptance Test (FAT) with customer.
• Site Acceptance Test (SAT).
• Understanding the project specification, Estimate project and resource allocation.
• Handling the team, Taking share and Learn sessions, managing the projects.
• Quality checking and graphics testing.
• Technical support for required things related to projects.
• Implementation of quality management system process.
• Measurement and improvement of quality of the deliverables.
• Design functional and detail design specification related with displays and shapes.
• Project related estimation, scheduling and input study.
• Checklist generation.
• Safeview Configuration as per customer requirement.
• Communication between Experion and sixnet RTU.
• Quick Builder database (Controller, Channels and Points) generation.
• Graphics and custom shapes documentation.
• Create custom General Script Holder (GSH) for custom shapes.
• Create custom context menu as per customer requirement.
• Create custom style sheets (CSS- Cascade Style Sheet).
• Development and testing of object specific VB script.
• Create Functional Design Specification (FDS).
• Remote project development and testing.
• Work experience on Sixnet Isagraf (IO configuration, Logic development and create
custom function block Library).
• Communication between sixnet RTU and COPA DATA Zenon scada using IEC60870-5-
101/104 and Modbus protocol.

3. Job Title: Lanco Solar Energy Pvt.Ltd.
Project: Vasavi Solar PV Project
Solar Plant: 35 MW.
Location: Jaisalmer, Rajasthan.
Project Description:
The work shall include design, engineering, procurement, supply, fabrication, Inspection, packing,
transportation to site, testing, calibration and commissioning of all instrumentation equipment, cables,
pipes, auxiliaries and erection hardware necessary for completion of Instrumentation & Automation
work for the 35 MW solar power plant.
Responsibilities:
• Preparation of 35 MW Solar Plant Scada systems Functional design Specification (FDS)
for customer review.
• Design system architectures.
• Create Bill of Materials.
• Create Project schedule and send it to customer.
• Display the approved/provided Single Line Diagram (SLD) Color animation in Scada.
• Preparation of Main Control Room (MCR) Scada Panel Drawing as well as all PV rooms /
Inverter rooms scada system panel drawings.
• Main Control Room and PV rooms panel Manufacturing and System power-up for test
functionally and hardware as well as software testing.
• Display the status of 33KV HT and 415V LT panels feeders & there Faults/alarms on
Scada as Per I/O’s list.
• Display/ Monitor/ records the parameters of Inverter, SCB, UPS, Battery Charger
Weather station, MFM’s, Numerical relays, Power Transformer annunciator.
• Communication between SCADA system and all Inverters or PV rooms, SCB, MFM,
Weather station, Pyranometer, MV Panels, ACDB panels, UPS, Numerical Relays,
Transformers and other systems through open protocol.
• Control (closing/tripping) of incomers / bus couplers/contactor and outgoings of 33KV
HT, 415V LT Panels as specified in I/O list.
• Provided plant parameter comparison option in SCADA.
• Quality checks and defect analysis for displays.
• Create / generate the customized Daily, Weekly, Monthly, and Yearly reports / trends as
per customer requirement.
• Provided auto emailing of daily report & SMS alerts in case of Inverter error/fault, PLC
faulty and other major electrical items identified by customer.
• Factory Acceptance test (FAT).
• Work on customer Comments if any.
• Site acceptance Test (SAT).
• Project Handover to site Manager.
• MOM signs off.

4. Job Title: Rays Power Infra
Locations: Ridhu Solar – Kolayat, Rajasthan.
Pragthi Solar – Midjil, Hyderabad.
RNJ Solar – Medak, Hyderabad.
Responsibilities:
• Preparation of 1 MW, 1MW and 10 MW Solar Plant Scada systems Functional design
Specification (FDS) for customer review.
• Design system architectures.
• Create Bill of Materials.
• Create Project schedule and send it to customer.
• Display the status of 33KV HT and 415V LT panels feeders & there Faults/alarms on
Scada as Per I/O’s list.
• Display/ Monitor/ records the parameters of Inverter, SCB, UPS, Battery Charger
Weather station, MFM’s, Numerical relays, Power Transformer annunciator.
• Control (closing/tripping) of incomers / bus couplers/contactor and outgoings of 33KV
HT, 415V LT Panels as specified in I/O list.
• Quality checks and defect analysis for displays.
• Create / generate the customized Daily, Weekly, Monthly, and Yearly reports / trends as
per customer requirement.
• Internal Factory Acceptance test (FAT).
• Work on customer Comments if any.
• Communication between Skytron SCB’s and Scada.
• Communication between All Inverters and Scada.
• Communication between All Transformer, HT/LT panels and Mateo stations to Scada.
• Site acceptance Test (SAT).
• Project Handover to site Manager.
• MOM signs off.
Job Title: Solaire Direct Pvt.Ltd and Fortum-Amrit Energy Pvt.Ltd.
Location: Rajasthan, India (On Site Assignment)
Responsibilities:
• Create functional design specification for Telemetry system.
• Design panel layout and wiring diagram.
• Communication between Schneider PLC and RTU.
• Interfacing between sixnet RTU and local HMI using RS232.
• EM6400 energy meters Installation and commissioning using RS485.
• Plant Data published using m2m gateway (Cloud network).
• Used IEC60870-5-101/104 protocol in SLDC Jaipur for data subscribing.
• Quality checks and defect analysis for displays and hardware.
• FAT and SAT support at site.
• Telemetry System handover to site Manager.
• MOM Sign Off.

5. Job Title: Suzlon Power Infrastructure Ltd.
Location: Rajasthan, India (On Site Assignment)
Responsibilities:
• Create functional design specification for Telemetry system.
• Design panel layout and wiring diagram.
• Communication between EM6400 energy meter and RTU.
• Interfacing between sixnet RTU and local HMI using RS232 and Ethernet.
• EM6400 energy meters Installation and commissioning using RS485.
• Configured Robustel modem for internet facility.
• Plant Data published using m2m gateway (Cloud network).
• Used IEC60870-5-101/104 protocol in SLDC Jaipur for data subscribing.
• Quality checks and defect analysis for displays and hardware.
• FAT and SAT support at site.
• Telemetry System handover to site Manager.
• MOM Sign Off.
Job Title: SunEdison Inc.
Location: Rajasthan, India (On Site Assignment)
Responsibilities:
• Create functional design specification for Telemetry system.
• Design panel layout and wiring diagram.
• Communication between EM6400 energy meter and RTU.
• Interfacing between sixnet RTU and local HMI using RS232 and Ethernet.
• EM6400 energy meters Installation and commissioning using RS485.
• Configured Robustel modem for internet facility.
• Plant Data published using m2m gateway (Cloud network).
• Used IEC60870-5-101/104 protocol in SLDC Jaipur for data subscribing.
• Quality checks and defect analysis for displays and hardware.
• FAT and SAT support at site.
Job Title: BP-Texas City Automation and Control Program (BP-TCACP)
Location: Houston (U.S.A).
Responsibilities:
• Review and analysis of LCN or GUS based display, Dynamic sub pictures and custom
change zone to develop HMI Displays.
• Development of HMI display, Dynamic shapes and custom faceplates as per customer
requirement.
• Development and validation of HMI displays which includes process, control, and
overview.
• Configuration of SCADA database with Third Party devices.
• Optimizing performance and functionality of HMI Displays.

6. • Quality checks and defect analysis for displays.
• Graphics documentation.
• Custom Shapes documentation and shape test procedure.
• Create Custom style sheets and custom context menu.
• Create PID and other devices custom faceplates as per customer requirement.
• Create custom General Script Holder (GSH) for custom shapes.
• Configured custom Quad and Dual safeview as per customer requirement.
• Create Operator Manual.
• Quality checks and defect analysis for all types of documentation.
• Remotely done Factory Acceptance Test (FAT).
• Project Handover to site Manager.
• MOM signs off.
Job Title: Tata Iron and Steel Corporation Ltd (TISCO)
Location: Jamshedpur, India (On site Assignment)
Responsibilities:
• Development of HMI display, Dynamic shapes and custom faceplates and Popup as per
LCN displays and customer requirement.
• Development and validation of HMI displays which includes process, control, overview
and trend.
• Optimizing performance and functionality of HMI displays based on LCN or GUS displays.
• Quality checks and defect analysis for displays.
• Quick Builder database (Controller, Channels and Points) generation.
• Configuration of SCADA database with Third Party devices.
• Factory Acceptance Test (FAT).
• Site Acceptance Test (SAT) and support at site.
• Project Handover to site Manager.
• MOM signs off.
Job Title: Tata Power Mumbai
Location: Mumbai, India (On site Assignment)
Responsibilities:
• Review and analysis of LCN or GUS based display, Dynamic sub pictures and custom
change zone to develop HMI Displays.
• Development of HMI display, Dynamic shapes and custom faceplates as per customer
requirement.
• Development and validation of HMI displays which includes process, control, and
overview.
• Create custom and standard shape documentation as per requirement.
• Validation of HMI displays with C300 and SCADA database.
• Optimizing performance and functionality of HMI displays based on LCN or GUS displays.

7. • Quality checks and defect analysis for displays.
• Quick Builder database (Controller, Channels and Points) generation.
• FAT and SAT support at site.
• Project Handover to site Manager.
• MOM signs off.
Job Title: Indian Petrochemical Ltd. (IPCL)
Location: Nagothane, India (On site Assignment)
Responsibilities:
• Review and analysis of LCN or GUS based display, Dynamic sub pictures and custom
change zone to develop HMI Displays.
• Development of HMI display, Dynamic shapes and custom faceplates as per customer
requirement.
• Development and validation of HMI displays which includes process, control, and
overview.
• Validation of HMI displays with C300 and SCADA database.
• Optimizing performance and functionality of HMI displays based on LCN or GUS displays.
• Quality checks and defect analysis for displays.
• Quick Builder database (Controller, Channels and Points) generation.
• FAT and SAT support at site
• Project Handover to site Manager.
• MOM signs off.
Job Title: Haldia Petrochemical Ltd. (HPL)
Location: Haldia, India (On site Assignment)
Indian Oil Corporation Ltd. (IOCL)
Location: Baroda, India (On site Assignment)
Responsibilities:
• Review and analysis of LCN or GUS based display, Dynamic sub pictures and custom
change zone to develop HMI Displays.
• Development of HMI display, Dynamic shapes and custom faceplates as per customer
requirement.
• Development and validation of HMI displays which includes process, control, overview
and Trend.
• Optimizing performance and functionality of HMI displays based on LCN or GUS displays.
• Quality checks and defect analysis for displays.
• FAT and SAT support at site.
• Project Handover to site Manager.
• MOM signs off.

8. Job Title: Associated Cement Company (ACC)
Location: Chandrapur and Wadi, India (On site Assignment)
Responsibilities:
• Review and analysis of LCN or GUS based display, Dynamic sub pictures and custom
change zone to develop HMI Displays.
• Development of HMI display, Dynamic shapes and custom faceplates as per customer
requirement.
• Development and validation of HMI displays which includes process, control, overview
and Trend.
• Validation of HMI displays with ESVT database.
• Configuration of SCADA database with Third party devices.
• Optimizing performance and functionality of HMI displays based on LCN or GUS displays.
• Quality checks and defect analysis for displays.
• FAT and SAT support at site.
• Project Handover to site Manager.
• MOM signs off.
Job Title: Rashtriya Chemical Fertilizer (RCF)
Location: Chembur, India (On site Assignment)
Responsibilities:
• Review and analysis of LCN or GUS based display, Dynamic sub pictures and custom
change zone to develop HMI Displays.
• Development of HMI display, Dynamic shapes & custom faceplates as per requirement.
• Development and validation of HMI displays which includes process, control, and
overview.
• Validation of HMI displays with C300 database.
• Optimizing performance and functionality of HMI displays based on LCN or GUS displays.
• Quality checks and defect analysis for displays.
• FAT and SAT support at site.
• Project Handover to site Manager.
• MOM signs off.
Job Title: Hindustan Petroleum Corporation Ltd. (HPCL)
Location: Mumbai, India (On Site Assignment)
Responsibilities:
• Development of HMI display, Dynamic shapes and custom faceplates as per LCN or GUS
displays and customer requirement.
• Graphics Migration Project: GUS to Experion.
• Validation of HMI displays with ESVT database.
• Optimizing performance and functionality of HMI displays based on LCN or GUS
displays.

9. • Quality checks and defect analysis for displays.
• FAT and SAT support at site.
• Project Handover to site Manager.
• MOM signs off.
Tools and Software:
• Graphics Translator and Migrator (GUS).
• Honeywell Experion PKS and HMI web display builder.
• Honeywell Quick builder for third party Interface.
• Honeywell Configuration studio.
• Sixnet IO Toolkit.
• Sixnet Isagraf Open.
• COPA DATA-Zenon SCADA.
• Iconics 32 bit and 64 Bit SCADA.
• Ellipse E3 SCADA.
• Robustel Modem.
• Cambium RF Modem.
Personal Details:
• Date of Birth: 01-06-1982
• Marital Status: Married
• Language: English, Hindi, Marathi
Passport Detail:
• Passport No.: J7101175
• Issue Date: 30-03-2011
• Expiry Date: 30-03-2021
Address for Communication:
Manoj Nimba Ahire
A-203, Sunshine Society,
Bhekrainagar. Phursungi Pune-412308
Contact No.: +91-9921948575
Personal Mail ID: ahire.mann@gmail.com
Declaration:
I hereby declare that all the information in this resume is true according to my knowledge. I will be responsible
for any consequences.
Place: Pune Manoj N. Ahire
Date: