Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Ls catalog thiet bi dien mms(e) dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document appears to be a data sheet listing specifications for various cable hangers, including their part number, load capacity in kilograms, dimensions in millimeters, material size, cable diameter accommodated, fixing hole diameter, and pack quantity. The cable hangers are grouped by weight range and numbered 1 through 6 within each weight range, with heavier duty hangers accommodated higher weights and loads.
Bảng giá thiết bị : MCCB, MCB, ELCB, RCBO, Contactor, ACB
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
The document discusses 3TF6 vacuum contactors from Siemens for switching motors between 335-450 kW. It provides an overview of the contactors and their compliance with IEC and EN standards. It then gives selection and ordering data for various 3TF68 and 3TF69 contactor models, including their technical specifications, operational currents, voltage ratings, auxiliary contact ratings and control supply voltages. Reversing contactors that can be supplied are also listed.
The document lists specifications and prices of automatic transfer switches (ATS), air circuit breakers (ACB), and other electrical components from Osemco, a manufacturer in Korea. It includes models of ATS and ACB in various amperages from 100A to 6300A, with prices ranging from millions to hundreds of millions of VND. It also lists automatic voltage regulators, battery chargers, generator and engine controllers, and ATS controllers with prices between millions to tens of millions of VND.
The document provides information about Hoangphuongjsc.com, a company that sells EasyPactTVS contactors, thermal overload relays, control relays, and motor protection circuit breakers ranging from 0.1A to 630A. It includes the company's contact information, an overview of its EasyPactTVS product range and features, and technical specifications for the different relay and contactor models.
This document provides specifications for Delta Electronics panel mount power supplies. It lists over 50 power supply models along with their output voltage, current, power, input voltage range, and dimensions. It also explains Delta's model numbering conventions for panel mount power supplies.
Ls catalog thiet bi dien mms(e) dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document appears to be a data sheet listing specifications for various cable hangers, including their part number, load capacity in kilograms, dimensions in millimeters, material size, cable diameter accommodated, fixing hole diameter, and pack quantity. The cable hangers are grouped by weight range and numbered 1 through 6 within each weight range, with heavier duty hangers accommodated higher weights and loads.
Bảng giá thiết bị : MCCB, MCB, ELCB, RCBO, Contactor, ACB
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
The document discusses 3TF6 vacuum contactors from Siemens for switching motors between 335-450 kW. It provides an overview of the contactors and their compliance with IEC and EN standards. It then gives selection and ordering data for various 3TF68 and 3TF69 contactor models, including their technical specifications, operational currents, voltage ratings, auxiliary contact ratings and control supply voltages. Reversing contactors that can be supplied are also listed.
The document lists specifications and prices of automatic transfer switches (ATS), air circuit breakers (ACB), and other electrical components from Osemco, a manufacturer in Korea. It includes models of ATS and ACB in various amperages from 100A to 6300A, with prices ranging from millions to hundreds of millions of VND. It also lists automatic voltage regulators, battery chargers, generator and engine controllers, and ATS controllers with prices between millions to tens of millions of VND.
The document provides information about Hoangphuongjsc.com, a company that sells EasyPactTVS contactors, thermal overload relays, control relays, and motor protection circuit breakers ranging from 0.1A to 630A. It includes the company's contact information, an overview of its EasyPactTVS product range and features, and technical specifications for the different relay and contactor models.
This document provides specifications for Delta Electronics panel mount power supplies. It lists over 50 power supply models along with their output voltage, current, power, input voltage range, and dimensions. It also explains Delta's model numbering conventions for panel mount power supplies.
2003 yamaha rx10 msh rx10rh rx10rsh snowmobile service repair manualfjjsjeusekkekm
This document is a service manual that provides instructions for periodic inspections, adjustments, repairs, and maintenance of various systems for a vehicle. It includes chapters covering general information, the cooling system, engine, power train, chassis, and electrical systems. Each chapter provides detailed procedures, specifications, and troubleshooting information for inspecting, removing, repairing, and installing components.
This document provides information on Burndy's WEJTAPTM system for electric utility distribution and transmission connections. It describes the key components of the system including WEJTAPTM connectors, installation tools, and power boosters. The WEJTAPTM connector uses an aluminum alloy wedge that is driven between the run and tap cables by the installation tool. Connector models are available for a wide range of conductor sizes from #8 to 1590 ACSR. The system has been tested to meet various industry standards and provides reliable, removable connections.
New holland w190 c tier 4 wheel loader service repair manualujdjjkskkmdme
The document provides instructions to remove the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator cap and draining coolant, removing the engine oil drain cap and draining oil, disconnecting wiring harnesses and hoses, and removing mounting bolts to separate the engine from the vehicle. Safety precautions are described such as releasing pressure from hydraulic circuits before draining fluids.
New holland w130 c tier 4 wheel loader service repair manualujfjjkskkmdme
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
SUPREME ELECTRICALS & CABLES - L&T Price Listsaravananct
This document provides information on training courses offered at the Larsen & Toubro Limited Switchgear Training Centre in Vadodara, India. Courses cover topics such as low and medium voltage switchgear, switchboard design, drives, protection relays, energy management, and more. Product information and pricing is also provided for various switchgear components including contactors, circuit breakers, relays, and accessories. Contact information is given at the top for the Vadodara training center.
This document provides specifications for Vari-Cleat cable cleats for single, trefoil, and bundled cable applications. It includes tables listing various cleat models with their corresponding cable diameter ranges, base sizes, weights, fixing holes, and suffixes that specify optional liners or coatings. The cleats consist of cast aluminum bases with stainless steel overstraps and fasteners. Recommended fixing methods and dimensions are provided. Test results show the cleats meet the BS EN 50368:2003 standard for cable cleats with respect to mechanical force resistance, impact resistance, temperature resistance, and flame tests.
This document provides a price list for electrical equipment manufactured in South Korea, including prices in Vietnamese Dong. It lists various types of equipment such as molded case circuit breakers (MCCBs), miniature circuit breakers (MCBs), residual current circuit breakers (RCCBs), switches, disconnectors, and surge protective devices. The prices range from tens of thousands to tens of millions of Dong depending on the equipment type and specifications such as voltage rating and current rating. The price list applies from April 15, 2015 and does not include 10% VAT tax.
This document provides specifications for 3-pole contactors with AC and DC coils in various frame sizes ranging from 9A to 150A. It includes information on mounting, connections, ratings, coil voltages, ordering, options and accessories. Key details are mounting on DIN rails or screws, screw terminal connections, AC3 duty ratings from 2.5kW to 90kW, auxiliary contacts, and international safety certifications.
This document provides a price list for electrical equipment manufactured in South Korea, including prices in Vietnamese Dong. It lists various types of equipment such as molded case circuit breakers (MCCBs), miniature circuit breakers (MCBs), residual current circuit breakers (RCCBs), switches, disconnectors, and surge protective devices, along with their ratings and prices. The price list applies from April 15, 2015 and notes that prices do not include a 10% value-added tax.
This document provides configuration and accessory options for the MC40 mobile computer. It includes 10 steps to configure an MC40 system: 1) Choose a configuration, 2) Choose a spare battery type, 3) Choose a charging method, 4) Choose a cradle configuration, 5) Choose cradle power accessories, 6) Choose cradle accessories, 7) Choose a headset, 8) Choose carrying options, 9) Choose ring scanner accessories, and 10) Choose an AC line cord appropriate for the country of use. The document lists specific SKU numbers and descriptions for all available accessories.
New holland ts125 a tractor service repair manualujdjjkskkmdme
This document provides sections and page numbers for the repair manual for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A and T6010, T6020, T6030, T6050, T6070. It lists 15 sections that are included in the repair manual, such as the engine, clutch, transmission, braking system, and electrical system. It also provides some notes for locating repair information for the new T6000 tractor models within the manual.
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction.
New holland t4050 deluxe tractor service repair manualujdjjkskkmdme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections for general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical system, platform/cab/bodywork, and technical support. Each section provides specifications, diagrams, removal and installation instructions, disassembly and assembly procedures, adjustments, and fault finding information.
This document provides specifications and diagrams for Thomson Industries dual shaft rail linear guides with modular carriages. It includes dimensions, part numbers, load ratings and limits for various guide sizes. The guides use pre-aligned dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. Maximum continuous rail length is 72 inches.
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- Models range from $295 to $695 and provide thrusts from 10-50kg with strokes from 50-300mm.
- Features include integrated motor, encoder and drive for precision; optimized screw and nut mechanism for accuracy and longevity.
- Models include basic, standard, dust-proof, and slider types for different environments and applications.
This document provides contact information for Hoang Phuong Electric Equipment Company and details their product offerings, which include contactors for various AC applications from 15 to 2600A. It lists contactor models, voltage ratings, power ratings, auxiliary contact blocks and coils. It also provides technical specifications and dimensions for the contactors. The document aims to support customers in selecting the appropriate contactor products.
This document provides a list of vehicle components and their corresponding connector pin-out pages. It includes over 100 different components ranging from actuators and sensors to amplifiers, batteries, and various control modules. Each component lists the page number in the 8W-80 manual that contains its connector pin-out diagram and details. This allows technicians to quickly look up pin-out information for any listed component.
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
The document provides information about WEG contactors and starters. It includes:
- An overview of the CWM line of contactors for controlling 3-phase motors up to 75HP at 460V, available in 11 sizes from 5-75HP.
- Tables listing technical specifications for each CWM contactor size, including rated current, horsepower ratings, auxiliary contact configurations, and coil voltage options.
- Descriptions and part numbers for common accessories like auxiliary contact blocks, overload relays, and spare parts.
Cataloge ge 2.industrial components_dienhathe.com-1_record_plusDien Ha The
The document discusses GE's Record Plus line of molded case circuit breakers. It provides an overview of the breakers, including their technical specifications and performance figures. It also lists relevant safety standards and certifications. The summary highlights the breakers' selective and current limiting protection capabilities, interchangeable trip units for flexible protection, common accessories, and versatile installation options.
2003 yamaha rx10 msh rx10rh rx10rsh snowmobile service repair manualfjjsjeusekkekm
This document is a service manual that provides instructions for periodic inspections, adjustments, repairs, and maintenance of various systems for a vehicle. It includes chapters covering general information, the cooling system, engine, power train, chassis, and electrical systems. Each chapter provides detailed procedures, specifications, and troubleshooting information for inspecting, removing, repairing, and installing components.
This document provides information on Burndy's WEJTAPTM system for electric utility distribution and transmission connections. It describes the key components of the system including WEJTAPTM connectors, installation tools, and power boosters. The WEJTAPTM connector uses an aluminum alloy wedge that is driven between the run and tap cables by the installation tool. Connector models are available for a wide range of conductor sizes from #8 to 1590 ACSR. The system has been tested to meet various industry standards and provides reliable, removable connections.
New holland w190 c tier 4 wheel loader service repair manualujdjjkskkmdme
The document provides instructions to remove the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator cap and draining coolant, removing the engine oil drain cap and draining oil, disconnecting wiring harnesses and hoses, and removing mounting bolts to separate the engine from the vehicle. Safety precautions are described such as releasing pressure from hydraulic circuits before draining fluids.
New holland w130 c tier 4 wheel loader service repair manualujfjjkskkmdme
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
SUPREME ELECTRICALS & CABLES - L&T Price Listsaravananct
This document provides information on training courses offered at the Larsen & Toubro Limited Switchgear Training Centre in Vadodara, India. Courses cover topics such as low and medium voltage switchgear, switchboard design, drives, protection relays, energy management, and more. Product information and pricing is also provided for various switchgear components including contactors, circuit breakers, relays, and accessories. Contact information is given at the top for the Vadodara training center.
This document provides specifications for Vari-Cleat cable cleats for single, trefoil, and bundled cable applications. It includes tables listing various cleat models with their corresponding cable diameter ranges, base sizes, weights, fixing holes, and suffixes that specify optional liners or coatings. The cleats consist of cast aluminum bases with stainless steel overstraps and fasteners. Recommended fixing methods and dimensions are provided. Test results show the cleats meet the BS EN 50368:2003 standard for cable cleats with respect to mechanical force resistance, impact resistance, temperature resistance, and flame tests.
This document provides a price list for electrical equipment manufactured in South Korea, including prices in Vietnamese Dong. It lists various types of equipment such as molded case circuit breakers (MCCBs), miniature circuit breakers (MCBs), residual current circuit breakers (RCCBs), switches, disconnectors, and surge protective devices. The prices range from tens of thousands to tens of millions of Dong depending on the equipment type and specifications such as voltage rating and current rating. The price list applies from April 15, 2015 and does not include 10% VAT tax.
This document provides specifications for 3-pole contactors with AC and DC coils in various frame sizes ranging from 9A to 150A. It includes information on mounting, connections, ratings, coil voltages, ordering, options and accessories. Key details are mounting on DIN rails or screws, screw terminal connections, AC3 duty ratings from 2.5kW to 90kW, auxiliary contacts, and international safety certifications.
This document provides a price list for electrical equipment manufactured in South Korea, including prices in Vietnamese Dong. It lists various types of equipment such as molded case circuit breakers (MCCBs), miniature circuit breakers (MCBs), residual current circuit breakers (RCCBs), switches, disconnectors, and surge protective devices, along with their ratings and prices. The price list applies from April 15, 2015 and notes that prices do not include a 10% value-added tax.
This document provides configuration and accessory options for the MC40 mobile computer. It includes 10 steps to configure an MC40 system: 1) Choose a configuration, 2) Choose a spare battery type, 3) Choose a charging method, 4) Choose a cradle configuration, 5) Choose cradle power accessories, 6) Choose cradle accessories, 7) Choose a headset, 8) Choose carrying options, 9) Choose ring scanner accessories, and 10) Choose an AC line cord appropriate for the country of use. The document lists specific SKU numbers and descriptions for all available accessories.
New holland ts125 a tractor service repair manualujdjjkskkmdme
This document provides sections and page numbers for the repair manual for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A and T6010, T6020, T6030, T6050, T6070. It lists 15 sections that are included in the repair manual, such as the engine, clutch, transmission, braking system, and electrical system. It also provides some notes for locating repair information for the new T6000 tractor models within the manual.
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction.
New holland t4050 deluxe tractor service repair manualujdjjkskkmdme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections for general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical system, platform/cab/bodywork, and technical support. Each section provides specifications, diagrams, removal and installation instructions, disassembly and assembly procedures, adjustments, and fault finding information.
This document provides specifications and diagrams for Thomson Industries dual shaft rail linear guides with modular carriages. It includes dimensions, part numbers, load ratings and limits for various guide sizes. The guides use pre-aligned dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. Maximum continuous rail length is 72 inches.
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- Models range from $295 to $695 and provide thrusts from 10-50kg with strokes from 50-300mm.
- Features include integrated motor, encoder and drive for precision; optimized screw and nut mechanism for accuracy and longevity.
- Models include basic, standard, dust-proof, and slider types for different environments and applications.
This document provides contact information for Hoang Phuong Electric Equipment Company and details their product offerings, which include contactors for various AC applications from 15 to 2600A. It lists contactor models, voltage ratings, power ratings, auxiliary contact blocks and coils. It also provides technical specifications and dimensions for the contactors. The document aims to support customers in selecting the appropriate contactor products.
This document provides a list of vehicle components and their corresponding connector pin-out pages. It includes over 100 different components ranging from actuators and sensors to amplifiers, batteries, and various control modules. Each component lists the page number in the 8W-80 manual that contains its connector pin-out diagram and details. This allows technicians to quickly look up pin-out information for any listed component.
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
The document provides information about WEG contactors and starters. It includes:
- An overview of the CWM line of contactors for controlling 3-phase motors up to 75HP at 460V, available in 11 sizes from 5-75HP.
- Tables listing technical specifications for each CWM contactor size, including rated current, horsepower ratings, auxiliary contact configurations, and coil voltage options.
- Descriptions and part numbers for common accessories like auxiliary contact blocks, overload relays, and spare parts.
Cataloge ge 2.industrial components_dienhathe.com-1_record_plusDien Ha The
The document discusses GE's Record Plus line of molded case circuit breakers. It provides an overview of the breakers, including their technical specifications and performance figures. It also lists relevant safety standards and certifications. The summary highlights the breakers' selective and current limiting protection capabilities, interchangeable trip units for flexible protection, common accessories, and versatile installation options.
Cataloge ge 2.industrial components-1_record_plusThuan Kieu
Cataloge ge 2.industrial components-1_record_plus
Catalog GE,
Catalog Thiết Bị Điện GE,
Catalog Điện Công Nghiệp GE,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
Cataloge ge 2.industrial components-1_record_plusDien Ha The
Cataloge ge 2.industrial components-1_record_plus
Catalog GE, Catalog,
Catalog Thiết Bị Điện GE, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp GE, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
Catalog MCCB ELCB Shillin Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Catalog huyndai mv lv
Catalog Idec, Catalog,
Catalog Thiết Bị Điện Idec, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Idec, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Idec tại https://dienhathe.com
Xem thêm các Catalog khác của Idec tại https://dienhathe.info
Để nhận báo giá sản phẩm Idec vui lòng gọi: 0907.764.966
Catalog huyndai mv lv-huyndai_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
M pact new air circuit breaker 400-4000 atwinkleerai
Electrical air circuit breaker is a switching device which can be operated manually as well as automatically for controlling and protection of electrical power system respectively. Air circuit breaker, is the kind of circuit breaker which operates in air at atmospheric pressure.
This document summarizes the specifications of a modular, crossflow type cooling tower called the TX-S Series. It has a cooling capacity range of 100-2000 HRT and features a low noise, super low noise, or energy saving super low noise design. The cooling tower is designed according to CTI and JCI standards and offers advantages such as space savings, light weight, low operating costs, and proven corrosion protection. It provides performance specifications, dimensions, motor details, and piping information for various tower models in the series.
The document provides contact information for the headquarters and branches of Mitsubishi Electric Vietnam including addresses and phone numbers. It also lists some of Mitsubishi Electric's products and services offered in Vietnam such as low voltage switchgear, automation equipment, inverters, circuit breakers, contactors, industrial robots, and NC control systems. The company states that its manufacturing follows Japanese quality standards and ISO certifications.
Serialpicker the high speed-robot with linear motorsOmas
Serialpicker is the the High-Speed Robot With Linear Motors that makes it easier to automate assembly processes in any automation project, making your machine independent from pneumatics.
Catalog ls metasol mc e_1108_denhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Catalog ls contactors and overload relays metasol mcDien Ha The
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Catalog ls contactors and overload relays metasol mc-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document provides specifications for LSIS META SOLUTON contactors and overload relays. It includes technical specifications for various contactor and overload relay models across different amperage frames ranging from 6A to 800A. It also provides dimension details, connection types, control coil characteristics, markings and internal structures. The document aims to showcase LSIS contactors and overload relays as offering economical and compact solutions with easy connection and compliance with international standards.
Catalog ls metasol mc_e_1103_3_denhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document provides information on Siemens 5SY miniature circuit-breakers, including:
- The circuit-breakers offer easier wiring installation with identical top and bottom terminals and enlarged wiring space. They also provide touch protection when terminals are fully tightened.
- Circuit-breakers can be manually assembled and disassembled without tools, allowing for fast replacement.
- Characteristics B and C are described for line protection applications with C handling higher inrush currents. Characteristic D has a tripping range for equipment with pulse loads.
- Selection and ordering data is given for 1-pole through 4-pole circuit-breakers ranging from 0.3A to 63A in characteristics B, C
1) The document provides specifications for TeSys contactors and reversing contactors for various applications and power ratings.
2) It includes information on rated operational current and voltage, number of poles, rated operational power, auxiliary contacts, thermal overload relays, suppressor modules, interfaces and contactor/reversing contactor type references.
3) The contactors and reversing contactors can be used for applications such as industrial control systems, building automation systems, and other control system applications. They provide operational power ratings from 1.5kW to 900kW at voltages ranging from 220V to 690V.
Similar to Ls catalog thiet bi dien mms e_0901 (20)
This document provides a quick start guide for the FED-C Series AC drive. It includes information on safety, wiring, the operating panel, quick setup, standard parameters, troubleshooting, and revision history. The guide contains basic instructions to get started with installation and configuration of the AC drive.
Fed e-quick-start-manual-bientanfuji-dienhathe.comDien Ha The
This quick start guide provides instructions for setting up and operating an inverter. It begins with an overview of product information, including nameplate details and specifications. It then covers wiring, including diagrams for 3-phase and single-phase power supply types. Terminal functions are described for the main circuit and control circuit. The guide presents a timing diagram for the control logic and acceleration/deceleration profiles. It concludes with a step-by-step setup process, including getting familiar with the keypad, setting motor parameters, checking rotation direction, and setting function codes for features like the startup frequency and DC injection braking.
Bảng giá LS 2019 - Bảng giá mới sẽ áp dụng từ ngày 20.0.2019
Để cập nhật các bảng giá mới lĩnh vực thiết bị điện Công
Nghiệp.Quý khách vui lòng vào link bên dưới
https://www.dienhathe.com/download/bang-gia-dien-cong-nghiep/?filter_nam=2019&filter_tai-lieu=bang-gia
Mitsubishi graphic operation terminal got2000 series parts library bookDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter fr-a700-instruction-manualbasic-160425031653Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series gt2103 new product releaseDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series got mobile function quic...Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series drive control interactiv...Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcbDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series (concise)Dien Ha The
- Monitor the GOT screen from a remote location.
- Switch screens and operate touch switches.
Control:
- Monitor and operate the GOT from a remote location.
- Switch screens, operate touch switches, change settings, and more.
Number of
simultaneous
connections
1 client
Multiple clients✽1
Screen
switching
Not possible
Possible✽2
Client OS
Windows, Linux, macOS, Android, iOS
Windows, Linux, macOS, Android, iOS
Client software
- Web browser
- Viewer software
- Web browser
- VNC client software✽3
Mitsubishi low voltage ws-v series comparison of previous and new modelsDien Ha The
1. The document compares previous and new models of molded-case circuit breakers and earth-leakage circuit breakers.
2. It outlines differences in dimensions, performance, and specifications between previous W & WS series models and new WS-V series models. Key changes include changes in tripping methods, operating characteristics, dimensions, rated currents, and breaking capacities.
3. Replacement models are identified for previous models, along with any drilling dimension or front plate cutout changes between models. Some models were added or had specifications adjusted.
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage miniature circuit breakers din seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage mccb and elcb(ws-v series) y0720-version 1-mitsuDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-f700 pj seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter catalog-mitsubishi-inverter-option-160426021125Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
4. 4
Large scale for current setting
Dial cover lock device
Auxiliaries are just snapped on:
easy, fast, without tools
Front mounted auxiliary
contact
Easy mounting onto DIN-rails
Handle Lock device(Off position)
Finger safe terminals
Three position operator handle:
ON-OFF-TRIP
(Only 100AF is applied)
Identification labels
45 mm
Test trip device for checks of the
trip mechanism
Dial cover
LS Meta-MEC Manual Motor Starters deliver
more efficiency through various functions
and compact design
Handle Lock Dial cover Terminals
MMS-32 MMS-63 MMS-100
Screw Lug Lug
www.dienhathe.xyz
www.dienhathe.vn
5. 5
Common use from 32 to 100AF
A wide variety of accessories enables a
flexible response to changes in specifications
Side
mounting
auxiliary
switch
Front mounting
auxiliary switch
Dial cover
Side mounting
Shunt release
Side mounting
Undervoltage
release
Side mounting
Undervoltage
release with
Switch
Side
mounting
alarm
switch
Side
mounting
alarm
switch
Direct adaptor
(Susol-MC)
Direct adaptor
(Susol-MC)
Susol-MC (9~100A)Mini-MC (9~16A)
www.dienhathe.xyz
www.dienhathe.vn
6. Feature
� 45mm width up to 32A, 55mm width up to
63A and 70mm width rated to 100amps
� Three position operator :
ON-OFF-TRIP (Only 100AF is applied)
� Complete range of common accessories
� Handle lock in the OFF position
� Class 10 overload trip characteristics
� Trip test
� Finger safe terminal
� Din rail & Screw mounting
Function
� Protection of group installation
� Protection of circuits
� Motor protection
� Starter protection
� Wide range of ambient
temperature compensation
� Phase failure protection
Standard
� Comply with the specifications in accordance with
IEC 60947-2 & IEC 60947-4-1
UL508 (Manual motor controller)
UL508 (Combination motor controller type E starter)
CSA C22.2 NO.14
GB14048
Certification
� KEMA CB type certificate
� EC-Declaration of conformity
� UL listed
� CSA certified
� CCC
6
www.dienhathe.xyz
www.dienhathe.vn
7. Product Selection Guide
Quick selection table ... IEC rating
Standard type
High breaking type
Instantaneous type
Accessories
Technical Information
General data
IEC performance data (Motor protection)
Manual motor controller
(UL 508, CSA C22.2 as Manual motor controllers)
Manual Motor Controller (UL508)
Type '2' coordination according to IEC 947-4-1
Time/Current characteristic
Thermal limit on short circuit for MMS
Dimensions
8
10
11
12
13
18
28
31
33
35
36
37
39
Contents
7
www.dienhathe.xyz
www.dienhathe.vn
13. 13
Accessories (Electrical Auxiliaries)
Manual Motor Starters
Description
Auxiliary Switch
∙Front mounting
∙2-pole
∙One front mounting module
per circuit breaker
Auxiliary Switch
∙Side mounting on the left
∙2-pole
∙One side mounting module
per circuit breaker
Any Trip Alarm Switch
∙Operates in case of trip
∙Side mounting on the left
∙2-pole
∙Set LA first in case of using
LX together
(MMS-63 can not accept
LX and LA together)
Magnetic Trip Alarm Switch
∙Operates in case of
instantaneous trip
∙Side mounting on the left
∙2-pole
∙Set LAM first in case of using
LX together
Type
FX...
LX...
LA...
LAM...
Connection diagram
1NO1NC 2NO 2NC
1NO1NC 2NO 2NC
www.dienhathe.xyz
www.dienhathe.vn
14. 14
Accessories (Electrical Auxiliaries)
Product Selection Guide
Description Connection diagram
Shunt release
∙Side mounting on the right
∙One side mounting module per
circuit breaker.
∙Can not use with RU or RUX
Undervoltage release
∙Side mounting on the right
∙One side mounting module per
circuit breaker.
∙Can not use with RU or RUX
Undervoltage release with Switch
∙Side mounting on the right
∙Include 2NO Auxiliary contact
∙One side mounting module per
circuit breaker.
∙Can not use with RU or RUX
∙Can not attach to MMS-32S
24V 50Hz / 28V 60Hz
110V 50Hz / 120V 60Hz
200V 50Hz / 200~220V 60Hz
220~230V 50Hz / 240~260V 60Hz
240V 50Hz / 277V 60Hz
380~400V 50Hz / 440~460V 60Hz
415~440V 50Hz / 460~480V 60Hz
24V 50Hz / 28V 60Hz
110V 50Hz / 120V 60Hz
200V 50Hz / 200~220V 60Hz
220~230V 50Hz / 240~260V 60Hz
240V 50Hz / 277V 60Hz
380~400V 50Hz / 440~460V 60Hz
415~440V 50Hz / 460~480V 60Hz
24V 50Hz / 28V 60Hz
110V 50Hz / 120V 60Hz
200V 50Hz / 200~220V 60Hz
220~230V 50Hz / 240~260V 60Hz
240V 50Hz / 277V 60Hz
380~400V 50Hz / 440~460V 60Hz
415~440V 50Hz / 460~480V 60Hz
Type
RS...
RU...
RUX...
www.dienhathe.xyz
www.dienhathe.vn
15. 15
Manual Motor Starters
�� E-Handle (Rotary-type)
MMS E-Handle is a Rotary-type Handle accessory which can be attached to the front to
control and verify the ON, TRIP, OFF condition of Manual
Motor Starters under the situation of closing panel.
∙Application Model : MMS-32H/HI,MMS-63S/H/HI, MMS-100S/H/HI
∙Operation temp. : -20~ +60°C
∙CE and UL certified
∙Degree of protection : IP65
∙Locking device : Lockable in on/off position
∙Material of insulation : Plastic(PA66)
Type Application MMS Remarks
MEH-32 MMS-32H, 32HI
Length of shaft :
MEH-63 MMS-63S, 63H, 63HI
115 or 315mm
MEH-100 MMS-100S, 100H, 100HI
�� Phase Bus
It is a device for a parallel connection with power terminals in the circuit lined up by MMS,
and it can provides the solution "Simple wiring”and“Compact wiring space”.
∙Application Model : MMS-32, 63
∙CE and UL certified
∙Safety Cover built-in
∙RoHS compliance
�� Diagram
Type Application MMS
Number of Rated Safety cover
Terminals current attached
PB-322
MMS-32S, 32H, 32HI
2
63A
PBPC-32
PB-323 3 (32for S, H)
PB-632
MMS-63S, 63H, 63HI
2
108A PBPC-63
PB-633 3
L3L2L1
1
2 4 6 8 10 12 14 16 18
3 5 7 9 11 13 15 17
M M M
www.dienhathe.xyz
www.dienhathe.vn
16. Product Selection Guide
Accessories (Electrical Auxiliaries)
16
�� Enclosure
Case cover of MMS enclosure is specifically designed with dust-proof and corrosive-proof
structure.
Therefore, it is the optimum product to use in dusty areas such as cement plants, cotton
mills as well as in the presence of corrosive gas or liquid (excl. explosive, flammable gas)
such as fertilizer, refinery, and plating plant.
∙Application Model: MMS-32H/HI
∙Operation temp. : -20~ +60℃
∙CE and UL certified
∙Degree of protection : IP65
∙Material of insulation :Plastic(ABS)
Type Application MMS Remarks
EPH-32 MMS-32H, 32HI Surface mount
�� Dial Cover
Dial cover is used to protect the set value from the operation that is not intended.
It is supplied as standard for all MMS.
∙Application Model : MMS-32, 63,100 (All types)
�� Insulation Barrier
Insulation barrier is used to enlarge the creepage distance and clearance to meet the
requirement of UL.
∙Application Model : MMS-100
Type Application MMS
IB100 MMS-100S, 100H, 100HI
�� Screw mounting holder
32AF MMS is only for DIN rail mountable by itself. Screw mounting holder is used to
mount MMS on a panel by screws.
∙Application Model : MMS-32
Dial Cover
Sealing
Type Application MMS Remarks
MP-32 MMS-32S, 32H, 32HI For M4 screw
www.dienhathe.xyz
www.dienhathe.vn
17. 17
�� Direct adaptor and Mounting unit
Direct adaptor , DA
Direct adaptor is used to connect MMS directly with a contactor
Mounting unit , MU
This device is attached module to connect joined MMS with a contactor
∙Application Model : MMS+ Susol contactor(MC-9~95), Mini contactor
MMS-100
MMS-63
MMS-32
MC-95 MC-63 MC-32
Note) MMS and Contactor connected with Direct adaptor.
Manual Motor Starters
Type Combined devices
Direct adaptor Mounting unit MMS MC
DA-16SA
MMS-32S
Mini-MC GMC-6M~16M (AC control)
DA-16SD Mini-MC GMC-6M~16M (DC control)
DA-16HA
MMS-32H, 32HI
Mini-MC GMC-6M~16M (AC control)
DA-16HD Mini-MC GMC-6M~16M (DC control)
DA-18SA
MMS-32S
MC-6a~18a (AC control)
DA-18SD
MU-45
MC-6a~18a (DC control)
DA-18HA MC-6a~18a (AC control)
DA-18HD
MMS-32H
MC-6a~18a (DC control)
DA-32SA
MMS-32S
MC-9~32 (AC control)
DA-32SD MC-9~32 (DC control)
DA-32HA
MMS-32H, 32HI
MC-9~32 (AC control)
DA-32HD MC-9~32 (DC control)
DA-63A
MU-55 MMS-63S, 63H, 63HI
MC-35~63 (AC control)
DA-63D MC-35~63 (DC control)
DA-95A
MU-70 MMS-100S, 100H, 100HI
MC-65~95 (AC control)
DA-95D MC-65~95 (DC control)
www.dienhathe.xyz
www.dienhathe.vn
18. 18
General data
Technical Information
�� Mounting
35mm DIN rail for MMS32~63
35mm or 75mm DIN rail for MMS100
- use 15mm depth for 35mm DIN rail
�� Environment
Ambient air temperature
storage : - 50…+ 80 �C
operation : - 20…+ 60 �C
Ambient temperature compensation : - 20…+ 60 �C
Maximum operating altitude : 2000m
Protection degree : IP20
Shock resistance : 25g
Vibration resistance : 5~150Hz
�� Caution for thermal adjustments
1.Keep the setting range as shown below.
2.Moving counterclockwise out of the setting range
may cause the damage of the device.
3. Calibration by ambient air temperature
In case of using out of the standard air temperature range(-5°C~+40°C) it needs to be
calibrated by one point
Dial setting method
�� Terminals
�� Power consumption
DIN rail mountingOperating positions
MMS32S MMS32H MMS63S, 63H MMS100S, 100H
Conformity to standards IEC60947
UL508, UL508 Type E
Approvals CE, UL
Terminal parts
Screwdriver
Single-core 1.conductor [㎟] / [AWG] 1...10 / 18...8 1...10 / 18...8 0.75...35 / 18...2 2.5...70 / 12...2/0
2.conductor [㎟] / [AWG] 1...6 / 18...10 1...6 / 18...10 0.75...25 / 18...4 2.5...50 / 12...1/0
Standard 1.conductor [㎟] / [AWG] 1...6 / 18...10 1...6 / 18...10 0.75...35 / 18...2 2.5...70 / 12...2/0
2.conductor [㎟] / [AWG] 1...6 / 18...10 1...6 / 18...10 0.75...25 / 18...4 2.5...50 / 12...1/0
Flexible 1.conductor [㎟] / [AWG] 1...6 / 18...10 1...6 / 18...10 0.75...25 / 18...4 2.5...50 / 12...1/0
2.conductor [㎟] / [AWG] 0.75...4 / 18...10 0.75...4 / 18...10 0.75...16 / 18...6 2.5...35 / 10...2
Tightening torque [Nm] / [Ib-in] 0.8...2.5 / 7...22 0.8...2.5 / 7...22 3...4.5 / 26...39 4...6 / 35...53
MMS32S MMS32H MMS63S, 63H MMS100S, 100H
Total power loss Pv
Circuit breaker at rated load [W] In = 0.16~1.6A : 4.4 In = 0.16~1.6A : 4.4 In = 10~22A : 10.2 In = 17~32A : 15
operating temperature In = 2.5~26A : 7.4 In = 2.5~26A : 7.4 In = 26~63A : 9.7 In = 40~63A : 21.8
In = 32A : 4.0 In = 32A : 4.0 In = 75~100A : 17.8
A : set to one
point lower
Calibrated automatically
B : set to one
point higher
-20℃ -5℃ +40℃ +60℃
www.dienhathe.xyz
www.dienhathe.vn
19. 19
Manual Motor Starters
�� Auxiliaries
Auxiliary contacts for front Auxiliary contacts for left side Alarm switch for left side
mounting mounting mounting
FX... LX... LA...
Rated thermal current / th
at 40℃ ambient temperature [A] 5 10 10
at 60℃ ambient temperature [A] 3 6 6
Contact class coordination
according to NEMA
(UL/CSA-Standards) AC A600 A600 A600
DC Q300 Q300 Q300
Back-up fuses gG, gL [A] 16 16 16
Rated supply current [V] - 240 24 240 24 240
AC-15: [A] - 3 6 4 6 4
DC-13: [V] 24 220 24 220 24 220
[A] 1 0.1 2 0.25 2 0.25
Weight (g) 18 30 40
Terminal parts
Screwdriver Pozidriv size 2
Single-core 1.conductor [㎟] / [AWG] 0.5...2.5 / 20...14 0.5...2.5 / 20...14
2.conductor [㎟] / [AWG] - 0.5...2.5 / 20...14
Standard 1.conductor [㎟] / [AWG] 0.5...4 / 20...10 0.5...4 / 20...10
2.conductor [㎟] / [AWG] 0.75...2.5 / 18...14 0.75...2.5 / 18...14
Tightening torque [Nm] / [Ib-in] 0.8...1.2 / 7...10 0.8...1.2 / 7...10
Undervoltage release Undervoltage release with 2 auxiliary Shunt release
for right side mounting contacts for right side mounting for right side mounting
RU... RUX... RS...
Actuating voltage
Pull-in 0.7...1.1×Us 0.85...1.1×Us 0.85...1.1×Us
Drop-out 0.7...0.35×Us 0.7...0.35×Us
Rated control voltage
min.: 24V 50Hz / 28V 60Hz 24V 50Hz / 28V 60Hz 24V 50Hz / 28V 60Hz
max.: 415~440V 50Hz / 460~480V 60Hz 415~440V 50Hz / 460~480V 60Hz 415~440V 50Hz / 460~480V 60Hz
Coil rating
Pull-in 8.5VA, 6W 8.5VA, 6W 8.5VA, 6W
Hold 3VA, 1.2W 3VA, 1.2W 3VA, 1.2W
Opening time (ms) - 20 20
Weight (g) 18 30 40
Terminal parts
Screwdriver Pozidriv size 2
Single-core 1.conductor [㎟] / [AWG] 0.5...2.5 / 20...14
2.conductor [㎟] / [AWG] 0.5...2.5 / 20...14
Standard 1.conductor [㎟] / [AWG] 0.5...4 / 20...10
2.conductor [㎟] / [AWG] 0.75...2.5 / 18...14
Tightening torque [Nm] / [Ib-in] 0.8...1.2 / 7...10
www.dienhathe.xyz
www.dienhathe.vn
20. 20
General data
Technical Information
�� Installation of auxiliaries
MMS-32S/H/HI
�To install FX remove the cover ① first.
�2 each of LX can be installed together.
�Only one of auxiliaries among RU, RS and RUX can
be mounted on the right side of MMS.
�Do not give trip signal to RS longer than 10 sec.
�Refer to the possible combination chart for the
mounting of LX, LA and LAM on left side of MMS.
�Push the trip button before installation of LAM
�Remove the indicated part in the fig.
before the additional installation of LX
Separation of auxiliaries from MMS
�be sure to turn off the main switch of MMS
before the separation.
�push softly the separation button on the side
of the auxiliary and pull it.
Be sure to turn off the main switch of MMS
before any other action.
www.dienhathe.xyz
www.dienhathe.vn
21. 21
Manual Motor Starters
MMS-63, 100S/H/HI
�To install FX remove the cover ① first.
�2 each of LX can be installed together.
( only 1 each for MMS-63)
�Only one of auxiliaries among RU, RS and RUX can
be mounted on the right side of MMS.
�Do not give trip signal to RS longer than 10 sec.
�Refer to the possible combination chart for the
mounting of LX, LA and LAM on left side of MMS.
�Push the trip button before installation of LAM
�Remove the indicated part of MMS-63 and
MMS-100 asshown in the fig. before the
installation of LA
�Do not install LA in the status of TRIP of MMS-100
�Remove the indicated part as shown in the above fig.
before the additional installation of LX
Separation of auxiliaries from MMS
�be sure to turn off the main switch of MMS
before the separation.
�push softly the separation button on the side of the
auxiliary and pull it.
www.dienhathe.xyz
www.dienhathe.vn
22. 22
General data
Technical Information
* RUX : can not attach to MMS-32S
* Only for MMS-100 * For all MMS
Combination with mini contactors
How to Install and reset RUX
Installing
(1) Check if the trip button of RUX is "UP" .
If not, push the side lever ① to come it up.
(2) Fit the both lower hooks ② into the MMS.
(3) Rotate the handle of MMS to the
20 to 30 degree ③ to ON direction and keep it.
(4) Fit the both upper hooks ④into the MMS.
(5) Input power to the RUX.
(6) Turn ON the handle of MMS.
Resetting
The trip button of RUX does not come "UP"
in the event of tripping due to undervoltage.
To turn ON the MMS after the tripping
① turn OFF the MMS and check if the trip button
of RUX comes "UP" .
② push the trip button
③ turn ON the MMS
Possible combination chart
Please read this chart completely
before installing the auxiliaries.
Improper combination can cause electric
failure or accident.
Insulation Reset
Insulation barrier Dial cover
Adaptor MMS + Contactor model
DA-16SA MMS-32S + GMC-6M~16M
DA-16SD MMS-32S + GMD-6M~16M
DA-16HA MMS-32H + GMC-6M~16M
DA-16HD MMS-32H + GMD-6M~16M
DA-18SA MMS-32S + MC-6a~18a (AC)
DA-18SD MMS-32S + MC-6a~18a (DC)
DA-18HA MMS-32H + MC-6a~18a (AC)
DA-18HD MMS-32H + MC-6a~18a (DC)
DA-32SA MMS-32S + MC-9~32 (AC)
DA-32HA MMS-32H + MC-9~32 (AC)
DA-63A MMS-63 + MC-35~63 (AC)
DA-95A MMS-100 + MC-65~95 (AC)
DA-32SD MMS-32S + MC-9~32 (DC)
DA-32HD MMS-32H + MC-9~32 (DC)
DA-63D MMS-63 + MC-35~63 (DC)
DA-95D MMS-100 + MC-65~95 (DC)
�� Installation of auxiliaries
www.dienhathe.xyz
www.dienhathe.vn
23. 23
�� E-Handle
Structure
Manual Motor Starters
Locking Device
When opening the panel door at ON position
Releasing
Open Panel Door
Locking
Installation at OF, OFF position
Setting to regular position through turning the handle
Pushing
On Position
(Vertical State)
Off Position
(Horizontal State)
Locking
www.dienhathe.xyz
www.dienhathe.vn
24. Technical Information
General data
24
�� E-Handle
Installation
Restricted fact of Assembling
Assembling is available for MMS-63/100 with 4 holes on the main cover
which is produced after June, 2007 based on manufacturing date.
Projection should be passed through
the hole when assembling
Projection should be passed through
the hole when assembling
www.dienhathe.xyz
www.dienhathe.vn
25. 25
Manual Motor Starters
Operating Test
※Caution
If trying to open the
door at ON or Trip
position, locking knob
can be damaged.
At On position
Panel door
can not be
opened
At Trip position
Panel door can
not be opened.
At Off position
Panel door can
be opened
Cutting off the shaft & applying the handle
www.dienhathe.xyz
www.dienhathe.vn
35. 35
Type '2' coordination according to IEC 947-4-1
Manual Motor Starters
�� Short-circuit current Iq = 50kA
Voltage : 400/415V, 50/60Hz
Definition type '2' coordination according to IEC 947-4-1 :
�The contactor or the starter must not endanger persons or systems in the event of a short-circuit.
�The contactor or the starter must be suitable for further use.
�No damage to the overload relay or other parts may occur with the exception of welding of the
contactor or starter contacts provided that these can be easily separated without significant
deformation (such as with a screwdriver).
Standard motors
AC-3 Thermal overload Magnetic release
Contactor
at 400/415V Circuit breaker release response current
1500rpm setting range
[kW] [A] Type [A] [A] Type [A]
- - MMS-32S 0.16A 0.1~0.16 2.08 GMC-6M / GMC-9 6 / 9
0.06 0.2 MMS-32S 0.25A 0.16~0.25 3.25 GMC-6M / GMC-9 6 / 9
0.09 0.3 MMS-32S 0.4A 0.25~0.4 5.2 GMC-6M / GMC-9 6 / 9
0.12 0.4 MMS-32S 0.63A 0.4~0.63 8.19 GMC-6M / GMC-9 6 / 9
0.18 0.6 MMS-32S 0.63A 0.4~0.63 8.19 GMC-6M / GMC-9 6 / 9
0.25 0.8 MMS-32S 1A 0.63~1 13 GMC-6M / GMC-9 6 / 9
0.37 1.1 MMS-32S 1.6A 1~1.6 20.8 GMC-6M / GMC-9 6 / 9
0.55 1.5 MMS-32S 1.6A 1~1.6 20.8 GMC-6M / GMC-9 6 / 9
0.75 1.9 MMS-32S 2.5A 1.6~2.5 32.5 GMC-12 12
1.1 2.7 MMS-32S 4A 2.5~4 52 GMC-18 18
1.5 3.6 MMS-32S 4A 2.5~4 52 GMC-18 18
2.2 5.2 MMS-32S 6A 4~6 78 GMC-18 18
3 6.8 MMS-32S 8A 5~8 104 GMC-18 18
4 9 MMS-32S 10A 6~10 130 GMC-18 18
5.5 11.5 MMS-32H 13A 9~13 169 GMC-22 22
7.5 15.5 MMS-32H 17A 11~17 221 GMC-22 22
10 20 MMS-32H 22A 14~22 286 GMC-32 32
11 22 MMS-32H 26A 18~26 338 GMC-32 32
15 29 MMS-32H 32A 22~32 416 GMC-32 32
18.5 35 MMS-63H 40A 28~40 520 GMC-50 50
22 41 MMS-63H 50A 34~50 650 GMC-50 50
30 55 MMS-63H 63A 45~63 819 GMC-65 65
37 67 MMS-100S 75A 55~75 975 GMC-75 75
- - MMS-100S 90A 70~90 1170 GMC-85 85
45 80 MMS-100S 100A 80~100 1300 GMC-85 85
Manual motor starter
www.dienhathe.xyz
www.dienhathe.vn
36. 36
Time/Current characteristic
Technical Information
ⅠⅠ) Thermal release trip current :
The adjustable inverse bimetal trip reliability protects motors against overloads.
The curve shows the mean operating current at an ambient temperature of 20℃ starting from cold.
Careful testing and setting ensures effective motor protection even in the case of single-phasing.
ⅡⅡ) Magnetic release trip current :
The instantaneous magnetic trip has a fixed operating current setting.
This corresponds to 13times the maximum value of setting range,
at a lower setting it is correspondingly higher.
Current setting Ie :
The overload trip corresponds to a thermal overload relay in a motor starter conforming to IEC 947-4-1.
If a different value is prescribed (e.g. reduced Ie for cooling medium having a temperature higher
than 40℃ or a place of installation higher than 2000m above sea level),
the setting current is equal to the reduced rated current Ie of the motor.
www.dienhathe.xyz
www.dienhathe.vn
37. 37
Thermal limit on short circuit for MMS
Manual Motor Starters
0.1 1 10 100
0.01
0.1
1
10
100
1A
1.6A
2.5A
4A
6A
8A
10A
13A
17A
22A
26A
32A
Icc rms(A)
SumofI2
dt(I2
t)
0.1 1 10 100
0.01
0.1
1
10
100
1A
1.6A
2.5A
6A
8A
10A
13A
17A
22A
26A
32A
4A
Icc rms(A)
PeakcurrentIp(kA)
Thermal limit in kA2
s in the magnetic operating zone (Ue=415V)
�� MMS-32S/H/HI
www.dienhathe.xyz
www.dienhathe.vn
38. 38
Thermal limit on short circuit for MMS
Technical Information
0.1 1 10 100
0.1
1
100
1000
10
10A
13A
17A
22A
26A
32A
40A
50A
63A
Icc rms(A)
SumofI2
dt(I2
t)
0.1 1 10 100
1
100
10
10A
13A
17A
22A
26A
32A
40A
50A
63A
Icc rms(A)
PeakcurrentIp(kA)
Thermal limit in kA2
s in the magnetic operating zone (Ue=415V)
�� MMS-63S/H/HI
www.dienhathe.xyz
www.dienhathe.vn
39. 39
Dimensions
Manual Motor Starters
1) Side auxiliary switch
2) Side magnetic trip alarm
switch
3) Side shunt release or
Side undervoltage release
4) Front auxiliary switch
5) Push-in Lugs for screw
mounting
6) 35㎜ standard mounting
rail acc. to EN 50 022
�� MMS 32S [mm]
0.32kg
MMS-32S+PB-32(2,3 Terminal)
PB-322(2 Terminal), PB-323(3 Terminal)
www.dienhathe.xyz
www.dienhathe.vn
40. 40
Dimension
Technical Information
1) Side auxiliary switch
2) Side magnetic trip alarm
switch
3) Side shunt release or
Side undervoltage release
4) Front auxiliary switch
5) Handle lock in OFF
position(∅5㎜)
6) Push-in Lugs for screw
mounting
7) 35㎜ standard mounting
rail acc. to EN 50 022
�� MMS 32H, 32HI [mm]
0.36kg
MMS-32H/HI+PB-32(2,3 Terminal)
PB-322(2 Terminal), PB-323(3 Terminal)
www.dienhathe.xyz
www.dienhathe.vn
41. 41
1) Side auxiliary switch
2) Side magnetic trip alarm
switch
3) Side shunt release or
Side undervoltage release
4) Front auxiliary switch
5) Handle lock in OFF
position(∅5㎜)
6) 35㎜ standard mounting
rail acc. to EN 50 022
Manual Motor Starters
�� MMS 63S, 63H, 63HI [mm]
1kg
MMS-63S/H/HI+PB-63(2,3 Terminal)
PB-632(2 Terminal), PB-633(3 Terminal)
www.dienhathe.xyz
www.dienhathe.vn
42. 42
Dimension
Technical Information
1) Side auxiliary switch
2) Side magnetic trip alarm
switch
3) Side shunt release or
Side undervoltage release
4) Front auxiliary switch
5) Handle lock in OFF
position(∅5㎜)
6) 35㎜ standard mounting
rail acc. to EN 50 022
7) 75㎜ standard mounting
rail acc. to EN 50 023
8) 4㎜ hexagon socket screw
�� MMS 100S, 100H, 100HI [mm]
2.2kg
www.dienhathe.xyz
www.dienhathe.vn
45. 45
�� MMS + Susol MC [mm]
Manual Motor Starters
www.dienhathe.xyz
www.dienhathe.vn
46. 46
Dimension
Technical Information
�� E-Handle [mm]
E-Handle Type A(mm) MMS Type
MEH-32, 115
min : 148.6
max:210.6(Shaft 115mm)
MMS-32H/32HI
MEH-32, 315
min : 148.6
max:410.6(Shaft 315mm)
MEH-63, 115
min : 193.6
max:255.6(Shaft 115mm)
MMS-63S/63H/63HI
MEH-63, 315
min : 193.6
max:455.6(Shaft 315mm)
MEH-100, 115
min : 220
max:282(Shaft 115mm)
MMS-100S/100H/100HI
MEH-100, 315
min : 220
max:482(Shaft 315mm)
www.dienhathe.xyz
www.dienhathe.vn
47. 47
14
�� Enclosure [mm]
�� Phase Bus
PB-322/323
PB-632/633
Manual Motor Starters
www.dienhathe.xyz
www.dienhathe.vn
48. www.lsis.biz
�� For your safety, please read user's manual thoroughly before operating.
�� Contact the nearest authorized service facility for examination, repair, or adjustment.
�� Please contact a qualified service technician when you need maintenance.
Do not disassemble or repair by yourself!
�� Any maintenance and inspection shall be performed by the personnel having expertise concerned.Safety Instructions
Specifications in this catalog are subject to change without notice due to
continuous product development and improvement.
�� HEAD OFFICE
LS Tower 1026-6, Hogye-dong, Dongan-gu,
Anyang-si, Gyeonggi-do 431-848, Korea
Tel. (82-2)2034-4940~8
Fax. (82-2)780-0382
�� CHEONG-JU PLANT
Cheong-Ju Plant #1, Song Jung Dong, Hung Duk Ku,
Cheong Ju, 361-720, Korea
2009. 01 Manual Motor Starters (E) 2003. 12/(19) 2009. 01 Printed in Korea STAFF
�LS Industrial Systems (Middle East) FZE ��Dubai, U.A.E.
Address: LOB 19 JAFZA VIEW TOWER Room 205, Jebel Ali Freezone P.O. Box 114216, Dubai, United Arab Emirates
Tel: 971-4-886 5360 Fax: 971-4-886-5361 e-mail: hwyim@lsis.biz
�Dalian LS Industrial Systems Co., Ltd. ��Dalian, China
Address: No.15, Liaohexi 3-Road, Economic and Technical Development zone, Dalian 116600, China
Tel: 86-411-8273-7777 Fax: 86-411-8730-7560 e-mail: lixk@lsis.com.cn
�LS Industrial Systems (Wuxi) Co., Ltd. ��Wuxi, China
Address: 102-A , National High & New Tech Industrial Development Area, Wuxi, Jiangsu, 214028, P.R.China
Tel: 86-510-8534-6666 Fax: 86-510-522-4078 e-mail: xuhg@lsis.com.cn
�LS-VINA Industrial Systems Co., Ltd. ��Hanoi, Vietnam
Address: Nguyen Khe - Dong Anh - Ha Noi - Viet Nam
Tel: 84-4-882-0222 Fax: 84-4-882-0220 e-mail: srjo@lsisvina.com
�LS-VINA Industrial Systems Co., Ltd. ��Hochiminh , Vietnam
Address: 41 Nguyen Thi Minh Khai Str. Yoco Bldg 4th Floor, Hochiminh City, Vietnam
Tel: 84-8-3822-7941 Fax: 84-8-3822-7942 e-mail: sbpark@lsisvina.com
�LS Industrial Systems Tokyo Office ��Tokyo, Japan
Address: 16FL, Higashi-Kan, Akasaka Twin Tower 17-22, 2-chome, Akasaka, Minato-ku Tokyo 107-8470, Japan
Tel: 81-3-3582-9128 Fax: 81-3-3582-2667 e-mail: jschuna@lsis.biz
�LS Industrial Systems Shanghai Office ��Shanghai, China
Address: Room E-G, 12th Floor Huamin Empire Plaza, No.726, West Yan'an Road Shanghai 200050, P.R. China
Tel: 86-21-5237-9977 (609) Fax: 89-21-5237-7191 e-mail: jinhk@lsis.com.cn
�LS Industrial Systems Beijing Office ��Beijing, China
Address: B-Tower 17FL.Beijing Global Trade Center B/D. No.36, BeiSanHuanDong-Lu, DongCheng-District,
Beijing 100013, P.R. China
Tel: 86-10-5825-6025,7 Fax: 86-10-5825-6026 e-mail: cuixiaorong@lsis.com.cn
�LS Industrial Systems Guangzhou Office ��Guangzhou, China
Address: Room 1403,14F,New Poly Tower,2 Zhongshan Liu Road,Guangzhou, P.R. China
Tel: 86-20-8326-6764 Fax: 86-20-8326-6287 e-mail: linsz@lsis.biz
�LS Industrial Systems Chengdu Office ��Chengdu, China
Address: Room 1701 17Floor, huanminhanjun internationnal Building, No1 Fuxing Road Chengdu, 610041, P.R. China
Tel: 86-28-8670-3101 Fax: 86-28-8670-3203 e-mail: yangcf@lsis.com.cn
�LS Industrial Systems Qingdao Office ��Qingdao, China
Address: 7B40,Haixin Guangchang Shenye Building B, No.9, Shandong Road Qingdao 26600, P.R. China
Tel: 86-532-8501-6568 Fax: 86-532-583-3793 e-mail: lirj@lsis.com.cn
�� Global Network
ⓒ 2003.12 LS Industrial Systems Co.,Ltd. All rights reserved.
www.dienhathe.xyz
www.dienhathe.vn