1) Litwin, a French engineering company, implemented Intergraph's SmartPlant 3D software to improve productivity on its projects and better integrate engineering disciplines.
2) Using SmartPlant 3D, Litwin realized a 25-35% initial increase in productivity compared to other systems for 3D modeling of civil works, structural steel, equipment, piping, and cable trays on a project.
3) SmartPlant 3D provided Litwin with fully integrated engineering capabilities, easier compliance with regulations, and higher quality deliverables like piping drawings and isometrics.
Digital construction for integrated project deliveryStephen Au
The industrial challenges and the value proposition, how and what are the Digital Construction with some case studies are discussed in the presentation.
COMMUNICATION THROUGH DIGITAL ENGINEERING PROCESSES IN AN AIRCRAFT PROGRAMijait
An aircraft is a complex, inherently multidisciplinary product that requires real time global collaboration for Design, Manufacture and Service. Digital engineering processes play an intelligent role in product and process design from concept to retirement, which is around 70 years. The entire engineering data is hierarchically structured and traced throughout the lifecycle under strict Configuration Control (CC). This requires an accurate, easily communicable Digital Mock-Up(DMU)as a Virtual 3D-static and dynamic platform for, real-time concurrent engineering through wide collaboration, a sample of which is presented herein. Holistically, this requires a networked Product Lifecycle Management (PLM) system as an Integrated Digital Environment (IDE) for engineering (primary and continuous improvement) for life cycle of the aircraft. The latest feature in PLM is the use of Model Based Engineering
This presentation outlines our vision on the D-Reader, the product our company develops. The product is focused on automated understanding of engineering drawings.
Digital construction for integrated project deliveryStephen Au
The industrial challenges and the value proposition, how and what are the Digital Construction with some case studies are discussed in the presentation.
COMMUNICATION THROUGH DIGITAL ENGINEERING PROCESSES IN AN AIRCRAFT PROGRAMijait
An aircraft is a complex, inherently multidisciplinary product that requires real time global collaboration for Design, Manufacture and Service. Digital engineering processes play an intelligent role in product and process design from concept to retirement, which is around 70 years. The entire engineering data is hierarchically structured and traced throughout the lifecycle under strict Configuration Control (CC). This requires an accurate, easily communicable Digital Mock-Up(DMU)as a Virtual 3D-static and dynamic platform for, real-time concurrent engineering through wide collaboration, a sample of which is presented herein. Holistically, this requires a networked Product Lifecycle Management (PLM) system as an Integrated Digital Environment (IDE) for engineering (primary and continuous improvement) for life cycle of the aircraft. The latest feature in PLM is the use of Model Based Engineering
This presentation outlines our vision on the D-Reader, the product our company develops. The product is focused on automated understanding of engineering drawings.
Know how Cygnet Infotech delivered a robust #ProjectManagement solution that addressed client's daily project planning and management challenges saving cost, manual work and time while improving efficiency.
Digital transformation in the construction industryJulien Gaidot
To cope with global urbanization, we need to build faster, cheaper and with a high quality. However, construction is one of the least digitized sector of the economy.
Evolution of cadcamcae techonology and value to the industry v1.compressedStephen Au
Lecture Note of BIM (1/6)
Objectives
*To understand the evolution of CAX technology in manufacturing industry
*The drivers of adoption of the CAX technology
*The value of using CAX technology in product development
Question
*What if building construction industry can apply the same technology ?
*What are the similarity and what are the difference?
www.mtech.com.hk
ETDP 2015 D2 Mars Rover Image Based Localization Using 3D Point Cloud Models ...Comit Projects Ltd
Mars Rover Image-based Localization using 3D Point Cloud Models for Mobile Field Reporting Applications
Mani Golpavar-Fard, Assistant Professor, University of Illinois and Rayan Jreije, Manager 3D Software Development, CCC
The method which is marker-less and infrastructure-independent, leverages simple digital images taken on a commodity smartphone or a tablet, identifies the location and orientation of the user in 3D, and provides access to project information and Building Information Model (BIM) without the need for storing any of the project information (including BIM) on the mobile device
This paper examines the concept of Augmented reality and its various applications in civil engineering. The concept envisages reducing, or rather eliminating errors that creep in during construction process due to human and other technical errors. The concept of AR helps in recreating the architectural and structural drawings in actual scale on the field. This uses the techniques of holographic projections and other mobile applications to create a 3D image of the drawing. The Concept is to create an image of the structure as envisaged on the basis of calculations and compare it in real time with the actual construction, which can help in identifying errors quickly and efficiently.
Eye in the Sky
Mani Golpavar-Fard, Assistant Professor, University of Illinois and Rayan Jreije, Manager 3D Software Development, CCC
This Initiative delivers an adoptable and adaptable guideline for implementation and safe operation of Unmanned Aerial Vehicles (UAVs) – equipped with digital and thermal cameras and/or laser scanners– for monitoring construction and operation of capital projects. It specifically looks into the requirements for accurate and timely collection, analysis, and communication of construction and operation performance data. It also brings traceability and accountability for safe and efficient operation of the UAVs on project sites.
Next Generation BIM
Sriram Sridharan, COO, Ineight
Today’s BIM solutions offer users an ability to view a three dimensional simulation of the stages of work and/or progress proposed to take place over the course of the project. These simulations are primarily leveraged during the pre-construction phase of a project. The simulation combines schedule data to design plans resulting in what is referred to as a 4D BIM solution. When a software expert designs the model to additionally reflect project costs within the proposed project, this is referred to as 5D BIM.
AUGMENTECHTURE - 3D Projection of Building Construction Floor Plan using Mark...vivatechijri
Nowadays, due to rising growth in all sectors, be it in healthcare, infrastructure, finance, education, and logistics, etc. Even though in the era of smart technology constructors, builders are using the old-style method, i.e., usage of brochures by generating 2D sketches of project layout. Builders use these files to sell their construction sites like flats, buildings, or any property to clients by just showing them various floor Plans in multiple views, etc. This procedure aims to be unproductive and ineffective because it does not give a clear idea regarding how exactly the property will look like. Augmented Reality, as shifting to a new developing technology, it gives an entirely new outlook for development. The AR implementation offers many advantages for construction planning, which will help our customers to draw a clear view regarding the assets before making deals without actually visiting the sample flats. To develop an AR-based brochure as a development tool that will serve as an application to intelligently increase the clients by minimizing their efforts and easing their decisionmaking process and maximizing the complete efficiency.
International Journal of Computer-Aided technologies (IJCAx)ijcax
Computer-aided technologies (CAx) mean the use of computer technology to aid in the design, analysis and manufacture various products. International Journal of Computer-Aided technologies (IJCAx) is an open access, peer-reviewed journal that publishes articles which contribute new results in all areas of Computer Aided technologies such as CAD, CAM, CAIM,CAR, CARD, CASE etc. The journal focuses on all technical and practical aspects of Computer Aided technologies. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on advanced CAx tools and establishing new collaborations in these areas. Authors are solicited to contribute to this journal by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in all Computer Aided technologies
What is the Digital Twin?
Digital twin is the ability to make a virtual representation of the physical elements and the dynamics of how an Internet of Things device operates and works. It's more than a blueprint, it's more than a schematic. It's not just a picture. It's a lot more than a pair of ‘virtual reality’ glasses. It's a virtual representation of both the elements and the dynamics of how an Internet of Things device responds throughout its lifecycle. It can be a jet engine, a building, process on factory floor, and much, much more.
Watch the video introduction of this keynote presentation from Genius of Things Summit in Munich https://youtu.be/RaOejcczPas
The Shift Is Here: Artificial Intelligence is at Work for the Construction In...indus.ai
Technology solutions that use Artificial Intelligence (AI) are already reducing costs, managing risk, and increasing safety for the Construction Industry.
This eBook shows industry stakeholders how to take advantage of the benefits of AI – both now and in the future.
Technology, Data Capture, & the Mechanical ContractorNathan C. Wood
There’s an ever increasing amount of data being collected on jobsites through the use of drones, laser scanning, and integrated Building Information Modeling (BIM). These tools provide innumerable data, but you need to know how to dissect that information in order to leverage it. This seminar will explore the different technologies available today, and how mechanical contractors are utilizing them to improve their bottom line. Prepare to learn different strategies for capturing and analyzing performance data across projects and identify struggling projects before they become a bigger issue. This seminar will conclude with a roundtable discussion about the current challenges with sharing data between the other project players like the General Contractor, Engineer, or Owner.
After diving deep into the client’s business challenges, Cygnet conceptualized a Project Management Solution for effective resource allocation and added transparency in operations.
Know how Cygnet Infotech delivered a robust #ProjectManagement solution that addressed client's daily project planning and management challenges saving cost, manual work and time while improving efficiency.
Digital transformation in the construction industryJulien Gaidot
To cope with global urbanization, we need to build faster, cheaper and with a high quality. However, construction is one of the least digitized sector of the economy.
Evolution of cadcamcae techonology and value to the industry v1.compressedStephen Au
Lecture Note of BIM (1/6)
Objectives
*To understand the evolution of CAX technology in manufacturing industry
*The drivers of adoption of the CAX technology
*The value of using CAX technology in product development
Question
*What if building construction industry can apply the same technology ?
*What are the similarity and what are the difference?
www.mtech.com.hk
ETDP 2015 D2 Mars Rover Image Based Localization Using 3D Point Cloud Models ...Comit Projects Ltd
Mars Rover Image-based Localization using 3D Point Cloud Models for Mobile Field Reporting Applications
Mani Golpavar-Fard, Assistant Professor, University of Illinois and Rayan Jreije, Manager 3D Software Development, CCC
The method which is marker-less and infrastructure-independent, leverages simple digital images taken on a commodity smartphone or a tablet, identifies the location and orientation of the user in 3D, and provides access to project information and Building Information Model (BIM) without the need for storing any of the project information (including BIM) on the mobile device
This paper examines the concept of Augmented reality and its various applications in civil engineering. The concept envisages reducing, or rather eliminating errors that creep in during construction process due to human and other technical errors. The concept of AR helps in recreating the architectural and structural drawings in actual scale on the field. This uses the techniques of holographic projections and other mobile applications to create a 3D image of the drawing. The Concept is to create an image of the structure as envisaged on the basis of calculations and compare it in real time with the actual construction, which can help in identifying errors quickly and efficiently.
Eye in the Sky
Mani Golpavar-Fard, Assistant Professor, University of Illinois and Rayan Jreije, Manager 3D Software Development, CCC
This Initiative delivers an adoptable and adaptable guideline for implementation and safe operation of Unmanned Aerial Vehicles (UAVs) – equipped with digital and thermal cameras and/or laser scanners– for monitoring construction and operation of capital projects. It specifically looks into the requirements for accurate and timely collection, analysis, and communication of construction and operation performance data. It also brings traceability and accountability for safe and efficient operation of the UAVs on project sites.
Next Generation BIM
Sriram Sridharan, COO, Ineight
Today’s BIM solutions offer users an ability to view a three dimensional simulation of the stages of work and/or progress proposed to take place over the course of the project. These simulations are primarily leveraged during the pre-construction phase of a project. The simulation combines schedule data to design plans resulting in what is referred to as a 4D BIM solution. When a software expert designs the model to additionally reflect project costs within the proposed project, this is referred to as 5D BIM.
AUGMENTECHTURE - 3D Projection of Building Construction Floor Plan using Mark...vivatechijri
Nowadays, due to rising growth in all sectors, be it in healthcare, infrastructure, finance, education, and logistics, etc. Even though in the era of smart technology constructors, builders are using the old-style method, i.e., usage of brochures by generating 2D sketches of project layout. Builders use these files to sell their construction sites like flats, buildings, or any property to clients by just showing them various floor Plans in multiple views, etc. This procedure aims to be unproductive and ineffective because it does not give a clear idea regarding how exactly the property will look like. Augmented Reality, as shifting to a new developing technology, it gives an entirely new outlook for development. The AR implementation offers many advantages for construction planning, which will help our customers to draw a clear view regarding the assets before making deals without actually visiting the sample flats. To develop an AR-based brochure as a development tool that will serve as an application to intelligently increase the clients by minimizing their efforts and easing their decisionmaking process and maximizing the complete efficiency.
International Journal of Computer-Aided technologies (IJCAx)ijcax
Computer-aided technologies (CAx) mean the use of computer technology to aid in the design, analysis and manufacture various products. International Journal of Computer-Aided technologies (IJCAx) is an open access, peer-reviewed journal that publishes articles which contribute new results in all areas of Computer Aided technologies such as CAD, CAM, CAIM,CAR, CARD, CASE etc. The journal focuses on all technical and practical aspects of Computer Aided technologies. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on advanced CAx tools and establishing new collaborations in these areas. Authors are solicited to contribute to this journal by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in all Computer Aided technologies
What is the Digital Twin?
Digital twin is the ability to make a virtual representation of the physical elements and the dynamics of how an Internet of Things device operates and works. It's more than a blueprint, it's more than a schematic. It's not just a picture. It's a lot more than a pair of ‘virtual reality’ glasses. It's a virtual representation of both the elements and the dynamics of how an Internet of Things device responds throughout its lifecycle. It can be a jet engine, a building, process on factory floor, and much, much more.
Watch the video introduction of this keynote presentation from Genius of Things Summit in Munich https://youtu.be/RaOejcczPas
The Shift Is Here: Artificial Intelligence is at Work for the Construction In...indus.ai
Technology solutions that use Artificial Intelligence (AI) are already reducing costs, managing risk, and increasing safety for the Construction Industry.
This eBook shows industry stakeholders how to take advantage of the benefits of AI – both now and in the future.
Technology, Data Capture, & the Mechanical ContractorNathan C. Wood
There’s an ever increasing amount of data being collected on jobsites through the use of drones, laser scanning, and integrated Building Information Modeling (BIM). These tools provide innumerable data, but you need to know how to dissect that information in order to leverage it. This seminar will explore the different technologies available today, and how mechanical contractors are utilizing them to improve their bottom line. Prepare to learn different strategies for capturing and analyzing performance data across projects and identify struggling projects before they become a bigger issue. This seminar will conclude with a roundtable discussion about the current challenges with sharing data between the other project players like the General Contractor, Engineer, or Owner.
After diving deep into the client’s business challenges, Cygnet conceptualized a Project Management Solution for effective resource allocation and added transparency in operations.
Presentation is about Transition Technologies PSC. We specialize in creation IT solutions for the manufacturing industry, especially Connected Product Lifecycle Management software and industrial exploitation of the newest Internet of Things (IoT) and Augmented Reality (AR) technologies. We are open to business proposals - just contact us.
Engineering smart into the machines you buildTanuj Gidwani
Know about Wipro's Product Engineering Capabilities and how our ability to leverage new-age technologies such as IoT, Cloud, 3D printing, virtualization, and Artificial Intelligence (AI) has a deep impact on the way enterprises do business in an ever-changing world
Startup pitch presented by co-founder and CEO Jaco Els. Cubitic offers a predictive analytics platform that allows developers to build custom solutions for analytics and visualisation on top of a machine learning engine.
Strategic IT Transformation Programme Delivers Next-Generation Agile IT Infra...Cognizant
The strategic use of the new technology enables Standard Life’s IT group to focus on generating business innovation and directly supporting business stakeholders in areas such as customer engagement while Cognizant manages the provisioning of Infrastructure as a Service.
How the Internet of Things can be applied on an Organization which was into the Service life-cycle management,Product life-cycle Management and designing of tools and parts using various software's like CAD and how it can benefit by implementing the IOT in its environment.
SoftTeco - Software Development Company Profileakrivarotava
SoftTeco is a software development company that was founded in 2008 providing custom software development services. Currently, we are providing professional services to customers located in the USA, Europe and Canada.
The core strength of the company comes from our highly professional team of software engineers. We have successfully completed over 300 projects in various industrial domains with different technology platforms with the highest level of process quality with transparency development processes.
Here's a presentation on piping engineering in PDF format, now available for all. This presentation covers the basics points of piping for our EPC industry. This presentation covers various aspects of piping engineering
www.lngsummit.com/pdf/Enrique_Alonso.pdf
3RD GEN MODULAR EXECUTION. SM DESIGN AND .... Steel / Pipe / E&I Work. COST ACCOUNT. Hours ...
Modular Designs Which Maximize Movement of Hours Offsite
• “Modularization Drives Layout” not “Layout Drives
Modularization”
• “Standardized” not “Customized” Designs
• Maximum Collaboration Between Owner, Engineer,
Procurement, Construction, Project Management and
Fabricato
Global Petroprojects Services AG is an international recruitment company of Saipem that recruits, employs, manages and develops international resources dedicated to worldwide projects in the oil & gas sector
New Ventures provides more entrepreneurship, Innovation and Research. There is a huge demand of New Ventures in the areas like exports, organic Industry, Dairy products, food products, Animation and Apps development. But it has to be start with collective investment so that sustainability in profit , growth and functions is possible.
Nowadays saving money is very important due to economic slow down, Inflation and rising cost. So saving money is needed for buying property, healthcare, child education, housing and much more. this information collected from newspaper by raghunathan janarthanan
Scheduling and routing solutions are also adding new business intelligence capabilities in order to help manage more employees in a wider variety of roles, including subcontractors, delivery drivers, and even customers.
1. Case Study: Litwin, Rueil Malmaison, France
Litwin Selects SmartPlant®
3D to
Improve Productivity
Streamlining Modeling Workflows
IDENTIFYING GOALS
With a growing demand of large CAPEX projects, Litwin faces the challenge of completing
turnkey jobs in a limited amount of time on a pre-defined budget. Litwin set out to improve
productivity and realize significant improvements in workflows and discipline integration
using a new generation of engineering software. The company also needed capabilities to
ensure environmental compliance requirements, as well as to support its vision for the future.
OVERCOMING CHALLENGES
Easily exchange the data generated during the design and re-use it to increase data•
consistency throughout the different stages (design, procurement, construction)
Base an environment on a Microsoft• ®
interface, interactive and user-friendly
Obtain an easy-to-use 3D design tool•
REALIZING RESULTS
Litwin completed the first phase of its overall program using Intergraph®
PDS®
software,
and then the company selected Intergraph SmartPlant®
3D software for phase two.
SmartPlant 3D, Intergraph’s next-generation 3D design system, provides clients with the
most productive, highest quality multidiscipline 3D modeling environment in the world for
global office execution of process and power projects. Customers using SmartPlant 3D
typically realize 25- to 35-percent initial increases in productivity compared to other systems,
higher quality deliverables, and shorter schedules.
SmartPlant 3D is the integral design component within SmartPlant Enterprise data-centric
solutions that provides all of the capabilities needed for large-scale project engineering design.
With SmartPlant 3D, Litwin can keep designs as-built throughout the plant life cycle.
Litwin chose to implement SmartPlant 3D on a live project without going through a pilot
project. For the implementation of the live project, the design team used SmartPlant 3D
in a concurrent engineering mode for the 3D modeling of the civil work, structural steel,
equipment, piping, and cable trays. “The possibility of integrating 3D external models and
placing drawings in reference is clearly an asset of the product,” says Patrick Mimouni,
CAD manager and SmartPlant 3D administrator at Litwin.
Litwin produced all area and piping drawings, isometrics, and pipe support drawings
with SmartPlant 3D. The company issued civil and underground network drawings with
MicroStation V8 based on views from the 3D model placed in reference.
facts at a glance
Company: Litwin
Web site: www.litwin.fr/public/
Description: Litwin is a French engineer-
ing company focusing on engineering,
procurement, and construction (EPC)
mid-sized turnkey contracts in the oil and
gas, chemical, energy, and environmental
sectors. The company provides compre-
hensive engineering services, from
feasibility studies through construction
of plants, for clients in Europe, North
Africa, and the Middle East. Litwin is
a subsidiary of the Bateman Litwin
N.V Group, a supplier of technology,
engineering, procurement, and project
management services to the world’s
energy and resource industries.
Employees: 1,200 worldwide
Industry: Process, Power & Marine
Country: France
Products Used
SmartPlant 3D•
SmartPlant Instrumentation•
SmartPlant P&ID•
PDS•
Key Benefits
Faster, higher-quality piping•
drawing production
Better, more easily implemented•
project coordination
Fully integrated engineering capabilities•
Easier compliance with regional laws•
and regulations