Sivakumar has over 15 years of experience in inspection of piping, structures, drilling rigs, ships, and other marine equipment for oil and gas projects. He has a Diploma in Mechanical Engineering and additional qualifications in non-destructive testing. Sivakumar has worked on numerous projects in Qatar and other countries, inspecting welding, piping installations, and equipment. He is familiar with applicable codes and standards and specializes in offshore inspection work.
B. Roberts is a British senior integrity consultant with over 40 years of experience in inspection engineering. He has worked extensively offshore and onshore, managing inspection teams and providing technical leadership. His areas of expertise include inspection of offshore and onshore facilities for oil and gas companies, implementing risk-based inspection programs, and developing integrity management strategies. He holds multiple engineering qualifications and inspector certifications.
This document provides information about weight enforcement procedures in Texas. It defines who qualifies as a weight enforcement officer and gives their authority to weigh vehicles and issue citations. It establishes that the Department of Public Safety must create uniform weighing procedures to ensure accurate weights. It outlines the process for weighing loaded vehicles, including using approved portable or stationary scales, and requiring vehicles be driven to the nearest available scales if needed. It provides statistics on inspections and violations from 2015 to 2017.
Regular inspections of safety critical equipment are needed to maximize safety, ensure reliability, optimize maintenance and provide compliance with standards. The document discusses the inspection services provided by Sparrows Group, including non-destructive testing techniques, lifting equipment examinations, rope access, underwater inspections and dropped object prevention. Sparrows Group has over 40 years of experience in inspection services and strategically placed inspection teams.
This document provides a summary of the qualifications and experience of Lawal Idris Daramola, a Certified Welding Inspector based in Nigeria. He has over 7 years of experience in welding inspection, quality assurance, and project management. He holds several safety and welding certifications. His most recent role was as a Welding Inspector for Saipem Contracting Nigeria Limited where he was responsible for inspection of welds, reviewing non-destructive testing reports, and ensuring welding activities were in compliance with standards and client specifications.
KhaledMaherHassanein completed a 5-day training course on Quality Management Systems (QMS) Auditor/Lead Auditor from July 26-30, 2015. The course, certified by TUV Rheinland, covered ISO 9001 quality systems standards and how to conduct quality system audits. Hassanein demonstrated achievement on a written examination and was issued certificate number 2386841 valid for 3 years.
Capt. G. C. Sekhar, Capt. Tushar Gangoly, and Capt. Seethesh Raroth have over 85 years of combined maritime experience and offer vessel inspections, audits, management services, and training through their company Sealutions Guaranteed. They have extensive experience in ship operations both at sea and ashore. Sealutions Guaranteed aims to provide professional, proficient, and productive services to support ship owners and managers. Their services include pre-purchase inspections, flag/class changes, vetting inspections, maritime training, safety audits, and new building consultancy.
Sivakumar has over 15 years of experience in inspection of piping, structures, drilling rigs, ships, and other marine equipment for oil and gas projects. He has a Diploma in Mechanical Engineering and additional qualifications in non-destructive testing. Sivakumar has worked on numerous projects in Qatar and other countries, inspecting welding, piping installations, and equipment. He is familiar with applicable codes and standards and specializes in offshore inspection work.
B. Roberts is a British senior integrity consultant with over 40 years of experience in inspection engineering. He has worked extensively offshore and onshore, managing inspection teams and providing technical leadership. His areas of expertise include inspection of offshore and onshore facilities for oil and gas companies, implementing risk-based inspection programs, and developing integrity management strategies. He holds multiple engineering qualifications and inspector certifications.
This document provides information about weight enforcement procedures in Texas. It defines who qualifies as a weight enforcement officer and gives their authority to weigh vehicles and issue citations. It establishes that the Department of Public Safety must create uniform weighing procedures to ensure accurate weights. It outlines the process for weighing loaded vehicles, including using approved portable or stationary scales, and requiring vehicles be driven to the nearest available scales if needed. It provides statistics on inspections and violations from 2015 to 2017.
Regular inspections of safety critical equipment are needed to maximize safety, ensure reliability, optimize maintenance and provide compliance with standards. The document discusses the inspection services provided by Sparrows Group, including non-destructive testing techniques, lifting equipment examinations, rope access, underwater inspections and dropped object prevention. Sparrows Group has over 40 years of experience in inspection services and strategically placed inspection teams.
This document provides a summary of the qualifications and experience of Lawal Idris Daramola, a Certified Welding Inspector based in Nigeria. He has over 7 years of experience in welding inspection, quality assurance, and project management. He holds several safety and welding certifications. His most recent role was as a Welding Inspector for Saipem Contracting Nigeria Limited where he was responsible for inspection of welds, reviewing non-destructive testing reports, and ensuring welding activities were in compliance with standards and client specifications.
KhaledMaherHassanein completed a 5-day training course on Quality Management Systems (QMS) Auditor/Lead Auditor from July 26-30, 2015. The course, certified by TUV Rheinland, covered ISO 9001 quality systems standards and how to conduct quality system audits. Hassanein demonstrated achievement on a written examination and was issued certificate number 2386841 valid for 3 years.
Capt. G. C. Sekhar, Capt. Tushar Gangoly, and Capt. Seethesh Raroth have over 85 years of combined maritime experience and offer vessel inspections, audits, management services, and training through their company Sealutions Guaranteed. They have extensive experience in ship operations both at sea and ashore. Sealutions Guaranteed aims to provide professional, proficient, and productive services to support ship owners and managers. Their services include pre-purchase inspections, flag/class changes, vetting inspections, maritime training, safety audits, and new building consultancy.
Karl Parvin has over 30 years of experience in quality management and health, safety, and environmental consulting for oil and gas projects. He has developed quality management systems and plans for 12 major oil and gas projects. He is certified in quality management and safety auditing. Parvin has extensive experience auditing projects and preparing documentation to comply with various international quality and safety standards. He has worked on projects in Australia, Southeast Asia, and the Middle East for companies such as Chevron, Woodside, and INPEX.
Ajoy Bhattacharyya is a 47-year-old Indian Welding and Quality Control Engineer with over 24 years of experience. He currently works as a Welding and QC Engineer for Qatar Petroleum, overseeing large pipeline projects. He has extensive experience in welding engineering, QA/QC, inspection, and auditing for oil and gas projects throughout the Middle East and Asia. He holds several professional certifications and has managed multi-million dollar pipeline installation projects.
Complete Personnel Service Solution - Oil & Gas UpstreamRogier Kind
Atlas Professionals is an international leading recruitment company. Since 1982, Atlas has played a major role in the provision of professionals to the energy, marine and renewables industries worldwide.
If quality and reliability are key for your business, Atlas Professionals is the partner you need to deliver highly qualified personnel. We create custom-made, comprehensive HR packages, which allows you to focus on the project without any concerns about manpower.
Over the years, Atlas Professionals has grown to become a no-nonsense, dependable HR service provider in the energy and marine industries with a mission to turn complex personnel challenges into transparent and secure solutions.
Secco Offshore Service (SOS) is a Hong Kong-based company that provides project management, engineering, and inspection services for offshore and marine projects. The company presentation document outlines SOS's services such as supplier evaluation, project management, construction supervision, and quality inspections for new build and in-operation projects. It also describes SOS's project management, construction supervision, and quality inspection project teams which are staffed by over 100 experienced engineers and inspectors. The benefits of SOS's project management services highlighted include ensuring contracts and specifications are followed, verifying drawings to prevent defects, overseeing workmanship, and managing project schedules and budgets.
A highly motivated and imaginative of Independent inspector with over than 7 Years experiences in fabrication/ vendor inspection of Oil & Gas equipment at Various of Country for Vessel ( Filter, Separator, Coalescor etc), coulomb, heat exchanger, tank, air cooler, metering skid & piping package, structure and valve
Seeking for On-Call/long term contract job of inspection in Mechanical, welding or quality control inspection as current position is Freelance Inspector and had good knowledge, Experiences in Vendor and Welding Inspection.
This document contains the resume of Saravanan A with the objective of seeking a challenging position utilizing his skills and qualifications. It includes his contact information, 11 years of experience in QA/QC inspection roles in various industries, and details of his educational background and technical certifications in welding inspection. Recent roles included welding inspector for water pipeline and shutdown maintenance projects in Singapore, overseeing activities like material verification, welding inspection, and documentation.
Alladi Pallapa Raju has over 16 years of experience in QA/QC inspection for fabrication projects in industries like oil and gas, bridges, and shipbuilding. He has extensive experience performing and interpreting NDT methods and is familiar with international codes like ASME and AWS. Raju holds an engineering diploma from Singapore and certifications in welding inspection, NDT methods, and safety. Currently he works as a QA/QC inspector in Singapore, where he performs inspections, coordinates testing and documentation, and ensures projects meet specifications.
CV : Inspection Engineer ( With SABIC Experience )Ganesan Sivam
Available on Local Transfer on / Before 31-07-2017 within KSA.
Please contact for Scheduling an Interview for Inspection Engineer position or equivalent. Thank you.
This document is a CV for M. Thiruvelappan applying for the position of Lead QA/QC Engineer. It summarizes his more than 15 years of experience in inspection, supervision, and quality control in the construction and asset maintenance industries. It details his academic and technical qualifications including various certifications in welding inspection, quality auditing, health and safety, and non-destructive testing. It also provides an overview of his relevant work experience and responsibilities in previous roles at various companies.
Ganesan Selvakumar has over 13 years of experience as a QA/QC engineer inspecting construction projects in various industries. He is certified in welding inspection and coating inspection. He has experience ensuring compliance with codes and standards. Some of his responsibilities include managing QA/QC teams, conducting inspections, reviewing documentation, and reporting on quality. He has extensive experience inspecting structural steel, piping systems, pressure vessels, tanks and other mechanical equipment.
This curriculum vitae summarizes the qualifications and experience of R. Kumar, including his contact information, educational background, and over 16 years of experience conducting quality control inspections for welding, NDT testing, and painting/coating projects in the oil and gas industry. He has worked on numerous international projects for major companies and holds relevant certifications.
This document contains a resume for Wael Mahmoud Abd El-hameed seeking a position utilizing his experience as a piping engineer, welding engineer, and authorized inspector. He has over 10 years of experience and holds certifications including API 570 Authorized Piping Inspector, API 510 Authorized Pressure Vessel Inspector, and ASNT NDT Level II. His career history includes positions as a QA/QC manager and welding engineer for various power plant projects in Egypt.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
Brian McDonald has over 15 years of experience in materials handling, logistics, and rope access work. He is highly organized and able to work well under tight deadlines. His work history includes roles as a Stores Coordinator, Materials Controller, and Rope Access Technician where he was responsible for organizing equipment and ensuring certifications and documentation were up to date. He has experience working with various types of lifting equipment and following safety procedures.
The document discusses OSHA's final rule on crane operator certification and evaluation requirements. It provides an overview of the rule's key elements, timeline, and impacts. The main points are:
1) The rule establishes a three-step process for crane operator qualification - training, certification by an accredited organization, and evaluation.
2) Certification must be specific to equipment type and renewed every 5 years. The Crane Type Advisory Group provides guidance for certifications of non-standard equipment.
3) Implementation of the rule has increased call volumes, certification volumes, and oversight of certifications and practical examiners to ensure program integrity.
2011 Transportation Oversight Presentatioin to NRCClark Vanderniet
The document summarizes AREVA's 2011 transportation oversight activities in North America. It discusses two major endeavors: 1) the creation of an AREVA North American Transportation Oversight organization to perform audits and inspections of transportation suppliers, and 2) the transfer of ownership of type-B transportation packages from AREVA Fuels to Transnuclear Inc., encompassing over 1400 packages. It also outlines the full implementation of oversight activities, including personnel training, supplier audits, shipment inspections, and responses to events. Issues identified included quality assurance problems among suppliers and documentation, marking, and maintenance issues among some packages.
This document provides personal and professional details about Ardiansyah Teuku Agam, including his name, contact information, education background, qualifications, certifications, computer skills, and work experience as a welding inspector. He has over 10 years of experience in welding inspection for various projects in fabrication, piping systems, pressure vessels, and offshore structures. He is qualified to inspect according to international codes like ASME, AWS, and API.
The document provides a summary of N.M.VenugopalRao's career experience and qualifications. It details over 18 years of experience in inspection engineering roles for pipeline, piping, and pressure vessel projects. Recent roles have included serving as a senior inspection engineer for Applus Velosi in Abu Dhabi and mechanical inspection lead for Moody Intertek. VenugopalRao holds relevant certifications and training in international codes and standards, and languages include English, Hindi, and Telugu.
Novell Cooper has over 4 years of experience operating forklifts and other industrial machinery. He has 2 years of experience as a machinist with skills in blueprint reading and precision measurement. His most recent role was as an Assembler at Power Solutions International where he installed engine components according to work instructions and verified product quality.
Jeffrey Wood provides his curriculum vitae which details his extensive qualifications and work experience in engineering and ship management. He has over 40 years of experience working internationally in roles such as Chief Engineer, Machinery Supervisor, and Site Manager. His most recent role is as a Consultant for Schulte Marine Concept Ltd in Shanghai, China where he performs vessel inspections and specification reviews. He is seeking a new position that utilizes his knowledge and skills.
An experienced Engineering Manager with more than 12 years in the Offshore/Onshore renewable Energy, Oil and Gas industry, adhoc vendor inspection, HSE, Pre-shipment Inspection. Also, Abraham has experience as a Third-Party Inspection Subsea Manager, QHSE and QA/QC Inspectors for Onshore & Offshore Projects and has handled, Solar sales Projects, Subsea Inspection Repair Maintenance (IRM) Projects for clients in Norway and abroad. He excels in timely submission of quality reports while ensuring that safety and quality of equipment are in accordance with client’s specifications, using competent hands, up-to-date test equipment, approved test procedures, ensuring correct markings, and that MCCR and MRBs are up to date and correct.
Entrion provides vendor surveillance and inspection services globally to ensure on-time delivery of quality equipment. They have over 100 experienced professionals located near major manufacturers who perform risk-based inspections during key stages such as design, fabrication, testing, and installation. This helps identify issues early to prevent delays and ensure operational readiness. Entrion has successfully supported many projects in industries like offshore drilling, refining, and shipping. Their standardized processes and global network allow them to provide a cost-effective 59% savings over alternative inspection options.
Karl Parvin has over 30 years of experience in quality management and health, safety, and environmental consulting for oil and gas projects. He has developed quality management systems and plans for 12 major oil and gas projects. He is certified in quality management and safety auditing. Parvin has extensive experience auditing projects and preparing documentation to comply with various international quality and safety standards. He has worked on projects in Australia, Southeast Asia, and the Middle East for companies such as Chevron, Woodside, and INPEX.
Ajoy Bhattacharyya is a 47-year-old Indian Welding and Quality Control Engineer with over 24 years of experience. He currently works as a Welding and QC Engineer for Qatar Petroleum, overseeing large pipeline projects. He has extensive experience in welding engineering, QA/QC, inspection, and auditing for oil and gas projects throughout the Middle East and Asia. He holds several professional certifications and has managed multi-million dollar pipeline installation projects.
Complete Personnel Service Solution - Oil & Gas UpstreamRogier Kind
Atlas Professionals is an international leading recruitment company. Since 1982, Atlas has played a major role in the provision of professionals to the energy, marine and renewables industries worldwide.
If quality and reliability are key for your business, Atlas Professionals is the partner you need to deliver highly qualified personnel. We create custom-made, comprehensive HR packages, which allows you to focus on the project without any concerns about manpower.
Over the years, Atlas Professionals has grown to become a no-nonsense, dependable HR service provider in the energy and marine industries with a mission to turn complex personnel challenges into transparent and secure solutions.
Secco Offshore Service (SOS) is a Hong Kong-based company that provides project management, engineering, and inspection services for offshore and marine projects. The company presentation document outlines SOS's services such as supplier evaluation, project management, construction supervision, and quality inspections for new build and in-operation projects. It also describes SOS's project management, construction supervision, and quality inspection project teams which are staffed by over 100 experienced engineers and inspectors. The benefits of SOS's project management services highlighted include ensuring contracts and specifications are followed, verifying drawings to prevent defects, overseeing workmanship, and managing project schedules and budgets.
A highly motivated and imaginative of Independent inspector with over than 7 Years experiences in fabrication/ vendor inspection of Oil & Gas equipment at Various of Country for Vessel ( Filter, Separator, Coalescor etc), coulomb, heat exchanger, tank, air cooler, metering skid & piping package, structure and valve
Seeking for On-Call/long term contract job of inspection in Mechanical, welding or quality control inspection as current position is Freelance Inspector and had good knowledge, Experiences in Vendor and Welding Inspection.
This document contains the resume of Saravanan A with the objective of seeking a challenging position utilizing his skills and qualifications. It includes his contact information, 11 years of experience in QA/QC inspection roles in various industries, and details of his educational background and technical certifications in welding inspection. Recent roles included welding inspector for water pipeline and shutdown maintenance projects in Singapore, overseeing activities like material verification, welding inspection, and documentation.
Alladi Pallapa Raju has over 16 years of experience in QA/QC inspection for fabrication projects in industries like oil and gas, bridges, and shipbuilding. He has extensive experience performing and interpreting NDT methods and is familiar with international codes like ASME and AWS. Raju holds an engineering diploma from Singapore and certifications in welding inspection, NDT methods, and safety. Currently he works as a QA/QC inspector in Singapore, where he performs inspections, coordinates testing and documentation, and ensures projects meet specifications.
CV : Inspection Engineer ( With SABIC Experience )Ganesan Sivam
Available on Local Transfer on / Before 31-07-2017 within KSA.
Please contact for Scheduling an Interview for Inspection Engineer position or equivalent. Thank you.
This document is a CV for M. Thiruvelappan applying for the position of Lead QA/QC Engineer. It summarizes his more than 15 years of experience in inspection, supervision, and quality control in the construction and asset maintenance industries. It details his academic and technical qualifications including various certifications in welding inspection, quality auditing, health and safety, and non-destructive testing. It also provides an overview of his relevant work experience and responsibilities in previous roles at various companies.
Ganesan Selvakumar has over 13 years of experience as a QA/QC engineer inspecting construction projects in various industries. He is certified in welding inspection and coating inspection. He has experience ensuring compliance with codes and standards. Some of his responsibilities include managing QA/QC teams, conducting inspections, reviewing documentation, and reporting on quality. He has extensive experience inspecting structural steel, piping systems, pressure vessels, tanks and other mechanical equipment.
This curriculum vitae summarizes the qualifications and experience of R. Kumar, including his contact information, educational background, and over 16 years of experience conducting quality control inspections for welding, NDT testing, and painting/coating projects in the oil and gas industry. He has worked on numerous international projects for major companies and holds relevant certifications.
This document contains a resume for Wael Mahmoud Abd El-hameed seeking a position utilizing his experience as a piping engineer, welding engineer, and authorized inspector. He has over 10 years of experience and holds certifications including API 570 Authorized Piping Inspector, API 510 Authorized Pressure Vessel Inspector, and ASNT NDT Level II. His career history includes positions as a QA/QC manager and welding engineer for various power plant projects in Egypt.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
Brian McDonald has over 15 years of experience in materials handling, logistics, and rope access work. He is highly organized and able to work well under tight deadlines. His work history includes roles as a Stores Coordinator, Materials Controller, and Rope Access Technician where he was responsible for organizing equipment and ensuring certifications and documentation were up to date. He has experience working with various types of lifting equipment and following safety procedures.
The document discusses OSHA's final rule on crane operator certification and evaluation requirements. It provides an overview of the rule's key elements, timeline, and impacts. The main points are:
1) The rule establishes a three-step process for crane operator qualification - training, certification by an accredited organization, and evaluation.
2) Certification must be specific to equipment type and renewed every 5 years. The Crane Type Advisory Group provides guidance for certifications of non-standard equipment.
3) Implementation of the rule has increased call volumes, certification volumes, and oversight of certifications and practical examiners to ensure program integrity.
2011 Transportation Oversight Presentatioin to NRCClark Vanderniet
The document summarizes AREVA's 2011 transportation oversight activities in North America. It discusses two major endeavors: 1) the creation of an AREVA North American Transportation Oversight organization to perform audits and inspections of transportation suppliers, and 2) the transfer of ownership of type-B transportation packages from AREVA Fuels to Transnuclear Inc., encompassing over 1400 packages. It also outlines the full implementation of oversight activities, including personnel training, supplier audits, shipment inspections, and responses to events. Issues identified included quality assurance problems among suppliers and documentation, marking, and maintenance issues among some packages.
This document provides personal and professional details about Ardiansyah Teuku Agam, including his name, contact information, education background, qualifications, certifications, computer skills, and work experience as a welding inspector. He has over 10 years of experience in welding inspection for various projects in fabrication, piping systems, pressure vessels, and offshore structures. He is qualified to inspect according to international codes like ASME, AWS, and API.
The document provides a summary of N.M.VenugopalRao's career experience and qualifications. It details over 18 years of experience in inspection engineering roles for pipeline, piping, and pressure vessel projects. Recent roles have included serving as a senior inspection engineer for Applus Velosi in Abu Dhabi and mechanical inspection lead for Moody Intertek. VenugopalRao holds relevant certifications and training in international codes and standards, and languages include English, Hindi, and Telugu.
Novell Cooper has over 4 years of experience operating forklifts and other industrial machinery. He has 2 years of experience as a machinist with skills in blueprint reading and precision measurement. His most recent role was as an Assembler at Power Solutions International where he installed engine components according to work instructions and verified product quality.
Jeffrey Wood provides his curriculum vitae which details his extensive qualifications and work experience in engineering and ship management. He has over 40 years of experience working internationally in roles such as Chief Engineer, Machinery Supervisor, and Site Manager. His most recent role is as a Consultant for Schulte Marine Concept Ltd in Shanghai, China where he performs vessel inspections and specification reviews. He is seeking a new position that utilizes his knowledge and skills.
An experienced Engineering Manager with more than 12 years in the Offshore/Onshore renewable Energy, Oil and Gas industry, adhoc vendor inspection, HSE, Pre-shipment Inspection. Also, Abraham has experience as a Third-Party Inspection Subsea Manager, QHSE and QA/QC Inspectors for Onshore & Offshore Projects and has handled, Solar sales Projects, Subsea Inspection Repair Maintenance (IRM) Projects for clients in Norway and abroad. He excels in timely submission of quality reports while ensuring that safety and quality of equipment are in accordance with client’s specifications, using competent hands, up-to-date test equipment, approved test procedures, ensuring correct markings, and that MCCR and MRBs are up to date and correct.
Entrion provides vendor surveillance and inspection services globally to ensure on-time delivery of quality equipment. They have over 100 experienced professionals located near major manufacturers who perform risk-based inspections during key stages such as design, fabrication, testing, and installation. This helps identify issues early to prevent delays and ensure operational readiness. Entrion has successfully supported many projects in industries like offshore drilling, refining, and shipping. Their standardized processes and global network allow them to provide a cost-effective 59% savings over alternative inspection options.
This document contains the resume of Faizan Hussain. It summarizes his work experience over 10+ years in oil and gas inspections including lifting equipment, NDT testing, and safety work. He has worked for companies in Pakistan, Saudi Arabia, and Qatar and holds professional certifications in lifting equipment inspection. The resume lists his responsibilities in various roles and safety training qualifications.
Cobalt Blue Global Ltd provides innovative solutions for industries through field service and maintenance, high purity fabrication, technical consulting, third party quality assurance and quality control (QA/QC), equipment moving and installation, welding facilities, and site management. It offers services for semiconductor, renewable energy, pharmaceutical, oil and gas, and heavy industry clients.
The document summarizes the Contractor Safety Management System (CSMS) used to manage contractor health, safety, and environmental performance. The CSMS includes administration and field implementation phases. The administration phase involves risk assessment, pre-qualification, and selection of qualified contractors. The field implementation phase ensures safe work through pre-job activities, work in progress monitoring, and final evaluations. Regular inspections and interim evaluations are conducted during work to check compliance and take corrective actions as needed. The CSMS provides a structured system to improve contractor HSE through all phases of work.
Transsol Ltd is an independent UK-based railway systems engineering consultancy that provides excellence in safety and risk management, reliability demonstration testing, and EMC assessments for railway projects. They have a small business with experience in big business sectors and an international client base including Network Rail, Bombardier Transportation, and Athens Metro. Their services include RAMS management, safety assessments, reliability testing, EMC analyses, and quality management certified under ISO 9001.
Simon Lawrence has over 9 years of experience in quality control, quality assurance, welding inspection, and mechanical inspection roles for various oil, gas, and petrochemical projects in the Middle East and India. He is certified in various welding, NDT, and quality standards. His experience includes pipeline construction, plant construction, materials inspection, welding procedures, dimensional inspections, valve testing, and hydrotesting. He is currently working as a QA/QC inspector for ADMA/OPCO in Abu Dhabi on offshore projects.
The document provides a curriculum vitae for Thangaraj raja that outlines his qualifications and experience. He has over 16 years of experience in inspection engineering, including inspecting pressure vessels, piping, tanks, and other equipment. He is qualified in various API and other international codes and standards. He has worked on numerous projects in Qatar and other countries inspecting fabrication, coating, insulation, and other activities.
Vijayasekaran D has over 17 years of experience in QA/QC inspection for oil, gas, and manufacturing projects. He has worked on projects in the UAE and Iran for companies like Petrofac and Technimont. He is experienced in welding inspection, NDT testing, material receiving inspection, and ensuring work is done per codes and standards like ASME and AWS. Vijayasekaran holds an engineering degree and NDT and welding certifications. He is currently working as a QA/QC field engineer on the Al Taweelah Alumina Refinery Project in the UAE.
This document provides a capability statement for Atec Verification, outlining their inspection, maintenance, and fabrication services for the oil and gas industry. They offer non-destructive testing, lifting equipment inspections, structural surveys, rope access, mechanical services, welding, and specialized reporting software. Atec Verification aims to provide safe, high-quality services to minimize disruptions for clients across various sectors including offshore drilling, production, renewable energy, and construction.
Commercial Technical Consulting LLP is a Mumbai-based consulting firm that provides services across various sectors including EPC, oil and gas, mining, energy, pharmaceuticals, IT, and more. They have a pool of experienced professionals who offer strategic support, business solutions, and functional expertise. Their services include management consulting, EPC and offshore construction, drilling, engineering, mining, HR and business development solutions.
Qaiser Shahzad is a QA/QC piping and welding inspector with 6 years of experience in quality control. He has expertise in inspection of piping fabrication, welding, and witnessing hydrotesting. He is seeking a position as a QA/QC inspector for oil, gas, fertilizer, or power plant projects. He has relevant technical certifications and has worked on projects in Pakistan and Saudi Arabia.
T.Paramarthalingom provides a curriculum vitae summarizing his qualifications and experience as a QA/QC inspector specializing in mechanical engineering projects. He has over 15 years of experience in inspection roles in Singapore and holds relevant technical certifications. His background includes inspecting piping, structural work, and equipment installation for offshore rigs, power plants, and other industrial facilities.
This document provides a summary of Muhammad Kaleem Ullah's qualifications and experience. It outlines his contact information, objective, expertise in technical areas, academic qualifications including a DAE in Mechanical Engineering and B.A. in Islamic Studies. It also lists his certifications in welding, painting and NDT inspections. His over 6 years of experience includes roles as a QA/QC inspector for welding and painting for various oil, gas and petrochemical companies in Saudi Arabia and Pakistan. It details his responsibilities and skills in welding inspection, painting inspection, and implementing quality plans.
Gecric provides asset integrity management and inspection services using rope access techniques. It aims to provide accurate and reliable information to clients to support decision making. The company's management team has extensive experience in West Africa and it adheres to international standards. Gecric offers services including rope access, non-destructive testing, fabric maintenance, asset integrity management, turnaround inspections, and helideck integrity. It is committed to safety, health, environment and quality.
Muhammad Waqas Yaseen is a technical support engineer with over 6 years of experience in asset integrity management, including risk-based inspection analysis. He has experience working with software like VAIL-PLANT and conducting projects for various oil and gas companies. His responsibilities have included identifying inspection points, preparing asset registers, reviewing inspection history, and conducting remaining life assessments. He is familiar with applicable codes and standards.
PT Sucofindo provides inspection, testing, certification, and consultancy services for the oil, gas, and renewable energy sectors in Indonesia. It has laboratories and offices in Jakarta and provides services such as shale gas testing, geothermal assessment, feasibility studies, drilling rig inspections, risk management, and operational safety services. PT Sucofindo's Asset, New & Renewable Energy division focuses on supporting renewable energy development, equipment inspections, and consultancy services related to coal bed methane, geothermal, and solar PV plants.
Agr Field Operations Pipeline Inspectionjsthetford
This document discusses AGR's field operations services and technologies for pipeline integrity management and inspection. It provides an overview of AGR's strategy, products and services including internal pipeline inspection tools, laser video inspection, and subsea inspection systems. It also presents case studies on internal pipeline inspections and discusses flexible riser inspection technologies.
The document summarizes a project to construct a marine tank farm near the port of Nhava Sheva in India over 36 months. Key details include:
- The tank farm will cover 5 acres and have a storage capacity of 100,000 kilolitres to support trade growth at the port.
- Work breakdown structure and network diagrams were developed to plan the project, which involves preconstruction activities, construction preparation, resource acquisition, construction, and testing/handover.
- Project risks will be managed through configuration, scheduling, estimating, and consulting support. Progress will be tracked using Earned Value Management.
This presentation by Tim Capel, Director of the UK Information Commissioner’s Office Legal Service, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
The importance of sustainable and efficient computational practices in artificial intelligence (AI) and deep learning has become increasingly critical. This webinar focuses on the intersection of sustainability and AI, highlighting the significance of energy-efficient deep learning, innovative randomization techniques in neural networks, the potential of reservoir computing, and the cutting-edge realm of neuromorphic computing. This webinar aims to connect theoretical knowledge with practical applications and provide insights into how these innovative approaches can lead to more robust, efficient, and environmentally conscious AI systems.
Webinar Speaker: Prof. Claudio Gallicchio, Assistant Professor, University of Pisa
Claudio Gallicchio is an Assistant Professor at the Department of Computer Science of the University of Pisa, Italy. His research involves merging concepts from Deep Learning, Dynamical Systems, and Randomized Neural Systems, and he has co-authored over 100 scientific publications on the subject. He is the founder of the IEEE CIS Task Force on Reservoir Computing, and the co-founder and chair of the IEEE Task Force on Randomization-based Neural Networks and Learning Systems. He is an associate editor of IEEE Transactions on Neural Networks and Learning Systems (TNNLS).
Carrer goals.pptx and their importance in real lifeartemacademy2
Career goals serve as a roadmap for individuals, guiding them toward achieving long-term professional aspirations and personal fulfillment. Establishing clear career goals enables professionals to focus their efforts on developing specific skills, gaining relevant experience, and making strategic decisions that align with their desired career trajectory. By setting both short-term and long-term objectives, individuals can systematically track their progress, make necessary adjustments, and stay motivated. Short-term goals often include acquiring new qualifications, mastering particular competencies, or securing a specific role, while long-term goals might encompass reaching executive positions, becoming industry experts, or launching entrepreneurial ventures.
Moreover, having well-defined career goals fosters a sense of purpose and direction, enhancing job satisfaction and overall productivity. It encourages continuous learning and adaptation, as professionals remain attuned to industry trends and evolving job market demands. Career goals also facilitate better time management and resource allocation, as individuals prioritize tasks and opportunities that advance their professional growth. In addition, articulating career goals can aid in networking and mentorship, as it allows individuals to communicate their aspirations clearly to potential mentors, colleagues, and employers, thereby opening doors to valuable guidance and support. Ultimately, career goals are integral to personal and professional development, driving individuals toward sustained success and fulfillment in their chosen fields.
This presentation by Yong Lim, Professor of Economic Law at Seoul National University School of Law, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
This presentation by Professor Giuseppe Colangelo, Jean Monnet Professor of European Innovation Policy, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
This presentation by Juraj Čorba, Chair of OECD Working Party on Artificial Intelligence Governance (AIGO), was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
This presentation by Professor Alex Robson, Deputy Chair of Australia’s Productivity Commission, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.
This presentation by OECD, OECD Secretariat, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.
XP 2024 presentation: A New Look to Leadershipsamililja
Presentation slides from XP2024 conference, Bolzano IT. The slides describe a new view to leadership and combines it with anthro-complexity (aka cynefin).
This presentation by OECD, OECD Secretariat, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
This presentation by OECD, OECD Secretariat, was made during the discussion “Pro-competitive Industrial Policy” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/pcip.
This presentation was uploaded with the author’s consent.
This presentation by Thibault Schrepel, Associate Professor of Law at Vrije Universiteit Amsterdam University, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
1.) Introduction
Our Movement is not new; it is the same as it was for Freedom, Justice, and Equality since we were labeled as slaves. However, this movement at its core must entail economics.
2.) Historical Context
This is the same movement because none of the previous movements, such as boycotts, were ever completed. For some, maybe, but for the most part, it’s just a place to keep your stable until you’re ready to assimilate them into your system. The rest of the crabs are left in the world’s worst parts, begging for scraps.
3.) Economic Empowerment
Our Movement aims to show that it is indeed possible for the less fortunate to establish their economic system. Everyone else – Caucasian, Asian, Mexican, Israeli, Jews, etc. – has their systems, and they all set up and usurp money from the less fortunate. So, the less fortunate buy from every one of them, yet none of them buy from the less fortunate. Moreover, the less fortunate really don’t have anything to sell.
4.) Collaboration with Organizations
Our Movement will demonstrate how organizations such as the National Association for the Advancement of Colored People, National Urban League, Black Lives Matter, and others can assist in creating a much more indestructible Black Wall Street.
5.) Vision for the Future
Our Movement will not settle for less than those who came before us and stopped before the rights were equal. The economy, jobs, healthcare, education, housing, incarceration – everything is unfair, and what isn’t is rigged for the less fortunate to fail, as evidenced in society.
6.) Call to Action
Our movement has started and implemented everything needed for the advancement of the economic system. There are positions for only those who understand the importance of this movement, as failure to address it will continue the degradation of the people deemed less fortunate.
No, this isn’t Noah’s Ark, nor am I a Prophet. I’m just a man who wrote a couple of books, created a magnificent website: http://www.thearkproject.llc, and who truly hopes to try and initiate a truly sustainable economic system for deprived people. We may not all have the same beliefs, but if our methods are tried, tested, and proven, we can come together and help others. My website: http://www.thearkproject.llc is very informative and considerably controversial. Please check it out, and if you are afraid, leave immediately; it’s no place for cowards. The last Prophet said: “Whoever among you sees an evil action, then let him change it with his hand [by taking action]; if he cannot, then with his tongue [by speaking out]; and if he cannot, then, with his heart – and that is the weakest of faith.” [Sahih Muslim] If we all, or even some of us, did this, there would be significant change. We are able to witness it on small and grand scales, for example, from climate control to business partnerships. I encourage, invite, and challenge you all to support me by visiting my website.
• For a full set of 530+ questions. Go to
https://skillcertpro.com/product/servicenow-cis-itsm-exam-questions/
• SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
• It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
• SkillCertPro updates exam questions every 2 weeks.
• You will get life time access and life time free updates
• SkillCertPro assures 100% pass guarantee in first attempt.
This presentation by Katharine Kemp, Associate Professor at the Faculty of Law & Justice at UNSW Sydney, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
2. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Inspection Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
Inspection Approach
5. Logistic Services
Customer Requirement
Implement Database
Screen & Qualify
Coordination
Schedule Inspection
Perform Inspection
Report and Results
Rig Evaluation
Rig Condition and Acceptance
Rig Compliance
Marine Safety
Alarm Management
Sensor Survey
Inspection Area’s
Inspection Services
3. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Inspection Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Inspection Area’s
IADC Rig Inspection
IADC Safety Inspection
Drilling & Well Servicing
IMCA / CMID / OCIMF(OVID)
Condition Survey
Dynamic Positioning Survey
Drilling Area’s
Drill site/location
Mud pump area
Mud mixing area
Mud tanks & pits
Material handling equipment
Pipe rack area
Blow-out preventers
Derrick & substructure
Drilling Cabin and Drawworks
Hoisting tools, hooks, bails, elevators
Perforating Operations and Use Of
Explosives
Marine & Nautical
Engine Room & Pump Room
Bridge Deck and Navigator consoles
DP Rooms and Engine control Room
HSE and Flag State
4. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Inspection Services
Identify Services Scope
Planning and Scheduling
Preparing of Procedure
Recourses identifying
Implement and Execution
Monitor and control
5. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Inspection Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Inspection Services
QA/QC Inspection (NDT)
Surveillance
Fabrication
Coating
Subsea Equipment
Equipment Testing
Drilling Equipment
FAT
6. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Data Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Technical Studies
Data Collection and study
Data tabulation, calculation,
Modeling and Analysis
Analysis and feasibility studies
Schedule development
Scope Coordination
Control and Reporting
Document Management
7. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Technical Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Technical Studies
Mooring Analysis
8 or 4 Point Mooring
Motion Response Analysis
Multi Body Simulation
Sloshing Analysis
Conductor Analysis
Geohazards
Riser Analysis
Hydrocarbon gas spreading analysis
8. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Risk Management
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Risk Management Planning
Risk Identification
Qualitative risk Analysis
Qualitative risk Analysis
Risk Response Planning
Risk Monitoring and Control
Regulatory compliance
Environment approvals
Offshore and onshore development
Drilling and Seismic
Emergency
Incident planning response
Risk identification
Management
9. MULTIPLE SERVICE OFFERED
1. Rig Inspection
KMAC PROJECT MANAGEMENT & TECHNICAL SERVICES
Management and Technical services throughout the project:
2. Third party QA/ QC Inspection services
3. Technical Engineering Studies
4. Risk Management Services
5. Logistic Services
Land Based Movement
QA/QC Inspection
Transport Management
Custom Clearance
DNV type Container supply