Jason Wyatt has over 30 years of experience in industrial maintenance and electrical engineering roles, including 4 years of offshore oil rig experience. He has extensive skills in PLC programming, industrial automation, robotics, electrical systems, and process equipment maintenance. Wyatt holds various technical certifications and associates degree in electronics, seeking a new leadership position to make use of his skills and experience.
1. Jason E. Wyatt
2120 Old Sterlington rd. Sterlington, La. 71280 Mobile: (601) 668-0720 E-mail: jasonwyatt1971@gmail.com
Objective
To obtain a leadership position utilizing my vast technical experience with a company that offers growth potential and challenge in
exchange for proven performance and job dedication.
Profile
• Safety focused, quality-conscious and team oriented
• 4 years Offshore electronics and electrical experience on a DP2 class deep water rig from shipyard build to deep water
working vessel
• 18+ years’ experience in a progressive manufacturing environment with extensive knowledge of manufacturing processes,
machinery, and equipment from plant start-up to mass production
• Demonstrated abilities in installation, maintenance, repair, troubleshooting, and preventive maintenance of equipment and
machinery including hydraulics, pneumatics, electrical, electronics, motor controls and safety systems
• Well-developed verbal and technical writing skills
• Strong ability to work independently with minimal assistance with a self-disciplined attitude and solid work ethic and excellent
attendance record
• 9+ years’ experience with multi-axis robots
Areas of Expertise
• PLC:
Allen Bradly SLC/500,
Compact Logix, RSLogix
5000
SIEMENS: S7
GE: 90-70 , 90-30 remote IO
• Hydraulic /Pneumatic
Components and Controls
• Electrical power production and
distribution (4160 Volt generator
down to intrinsically safe
controls)
• RADAR principles and Controls
• Robotic Electrical / Mechanical
Troubleshooting
• Industrial Networking Systems
(Ethernet/IP, Profibus, DeviceNet, ModBus,
ControlNet, etc)
• Amphion Drilling Controls
• Dynamic Positioning Controls PM and
troubleshooting
• Vessel power management systems
• HSE Management Systems and
continuous improvement
• Licensed HVAC Technician
• Communication Systems (CCTV, LAN etc)
• Basic Welding and Soldering
• Basic Machine Shop Skills
• CPR / Emergency Response
• HMI Software
• Microsoft Office Suite Proficient
• Proficient at reading electrical, mechanical,
pneumatic and hydraulic blueprints and
schematics
• Experienced in various types of
maintenance management systems (SAP,
PeopleSoft, CMMS, etc.)
• Technical procedure writing
Professional Experience
WAYNE TRAIL (LINCOLN ELEC CO) FORT LORAMIE, OH APR. 2015 – OCT. 2015
Electrical Controls Engineer
• Developed and verified transfer systems to interface with customer equipment.
• Responsible for the Program, Design, Debug, Install and Start up of PLCs, HMIs, Motion Control Servo Drives and all
Integrated Systems. Worked with the customer on site to maximize the efficiency of equipment to meet production needs.
• Provide assistance to the Sales, Product Development, and Service departments to resolve customer concerns as well as to
answer technical questions when assisting the customer and maintenance staff in troubleshooting issues with their
equipment.
• Assisted in the development of equipment modifications and improvements to better meet costumer needs.
ENSCO INTERNATIONAL GULF OF MEXICO 2011 - 2015
Electronics Technician
• Responsible for the effective preventive maintenance, troubleshooting and repair of all Rig Automation, Controls and
Instrumentation Systems
• Main Systems Experience:
Power Generation and Distribution Controls (4160 Volt generator down to intrinsically safe controls)
Power management, Vessel management, Dynamic Positioning Systems
Dynamic Positioning Reference Sensors
Fire & Gas Systems
2. Jason E. Wyatt – Page 2
Mobile: (601) 668-0720 E-mail: jasonwyatt1971@gmail.com
Drilling Control Systems
Automation & PLC’s: Trained and Experienced with PLC Controls
Drilling and Thruster VFD’s
BOP Controls
Electrical controls for proportional hydraulics, Cranes, Pipe Handling, etc…
PAGA Systems
Other Marine & Navigation Equipment, Level Gauging, UPS’s, etc…
NISSAN MOTOR CORPORATION MADISON, MS 2002- 2011
Automation Maintenance Technician
• Worked as experienced and skilled technician with a broad knowledge in the repair, maintenance and preventive
maintenance of all equipment and machinery in the automotive manufacturing areas.
• Assisted contractors for the initial plant start up and launch of the facility and continued with the training of new technicians to
the department.
• Subject Matter Expert for the paint maintenance department to develop and optimize their PM tasks and scheduled
frequencies.
J.E. MERRIT CONSTRUCTION - COLUMBUS, MS
Kerr McGee – Hamilton, MS Dow Chemical – Kenner, LA
2001-2002
A-Class Journeyman
Responsibilities include cable tray, conduit, flex; variable sizes of each, including plaster bond and aluminum.
Terminations of variable speed drives, PLC’s, switch gear, etc. Heat tracing and various other industrial electrical duties.
High voltage work to include termination and stress cones of 15 to 75 KVA transformers.
WEYERHAEUSER (CMF) – COLUMBUS, MS 1999-2001
Technician
Responsibilities included; operation, repair, maintenance, troubleshooting and preventive maintenance of all plant machinery and
equipment. Excelled in Mastry program in AC/DC, flow controls, fluid measurement devices, basic bearings, basic hydraulic
systems, air compressor systems and pneumatic controls. In charge of all environmental operations within my team.
HUNTER DOUGLAS – SHANNON, MS 1995-1999
Maintenance Technician
Responsibilities consisted of repair, maintenance, troubleshooting, and preventive maintenance on plant machinery and
equipment. Maintained and calibrated all plant measuring devices for ISO9000. Also, was responsible for all grinding operations
of slitter knives for slat line production and building maintenance. This position required extensive knowledge of shop equipment,
hydraulics, pneumatics, commercial and industrial wiring, AC and DC electricity, single- and three-phase wiring, and light
welding/soldering. Also was responsible for setting dies for metal stamping operations.
MS ARMY NATIONAL GUARD - TUPELO, MS 1995-1997
Aviation Electronics Technicians
Was responsible for troubleshooting and repairing all electrical and electronics malfunctions on the OH-58D helicopter.
*Assisted the 1/185th
Aviation group in becoming the first combat certified OH-58D helicopter unit in the U.S. National Guard.
U.S. AIR FORCE – SEYMORE JOHNSON AFB, NC 1991-1995
F-15-E Attack Controls System Specialist 0 A5 Level (AFC-45251A)
Was responsible for troubleshooting and repairing all integrated avionics systems for the F-15E aircraft
• Graduated in top 10% of class at Lowery Air Force Base in Colorado
• Served as a member of the 335th
Fighter Squadron that was recognized as “Top Fighter Squadron of the Year” for 2
consecutive years.
3. Jason E. Wyatt – Page 3
Mobile: (601) 668-0720 E-mail: jasonwyatt1971@gmail.com
• Received an Accommodation Medal for Outstanding Service during Desert Storm
• Yearly training in Chemical War Fare and Response
Education & Professional Certifications
Associate’s Degree Electronics Curriculum & Training 1995
Community College of the US Air Force
Basic Electricity 1999
East Mississippi Community College
Basic Heat Tracing 1999
Weyerhaeuser
Certified Industrial Electrician 2002
National Center for Construction Education and Research
TRP502, PPH607, Aquabell, Accustat, GN4002, GNM100 Power Supplies, BS Speed Card and Safety 2003
Sames
Allen Bradly PLC (Maintenance and Troubleshooting) 2010
Intellect Controls Group
SCR Maintenance – Ross Hill Intermediate (SCR Controls) 2012
NOV
Barracuda Rugged Computer Technical Training 2012
AZONDIX
PLC for RIG Systems – Applications of Siemens 2012
NOV
Basic Rigging and Fall Protection 2013
SMS Training Academy
Top Drive Systems – AC Top Drive Electrical Systems 2013
Nance HVACR Technical School
AC Drive Fundamentals & Maintenance 2013
NOV
Amphion Maintenance for Rig Electrician and ET 2013
NOV
HVACR 2014
Nance HVACR Technical School
Hazardous Area Electrical Training 2014
IADC