1. FERNANDO M. CAMUS
Capital Building, Room no.2
Alsad, Doha,Qatar
Tel. +97466696088
E-Mail add - dingcamus@yahoo.com
SUMMARY OF QUALIFICATION AND SKILLS:
More than 15 years of experience and conversant with Testing & Commissioning of Electrical
system and Installations. Operates with the minimum of supervision and take
initiative within delegated boundaries. Remain calm under pressure, command respect,
Gaining the confidence of colleagues and can communicate effectively at all levels.
Leadership and coordination with improvement involved in the construction and
supervision of electrical installation.
……………………………………………………………………………………………………..
Qualifications: Bachelor of Science in Electrical Engineering
……………………………………………………………………………………………………..
Industry Experience - 20 years
Career History
1996-2005 2005-2006 2006-2011 2011-2012 2012-2013 2014-Present
Sumisetsu Phil. Thermo LCC Leighton Muhibbah Siemens SIBS Group
Inc. Dubai, UAE Qatar Eng`g. Qatar WLL, Qatar Qatar
Engineer / TAB/ Commissioning Commissioning MEP Commissioning
CAD Commissioning Engineer Engineer Engineer Engineer
Engineer
…………………………………………………………………………………………………………………………...
SPECIAL KNOWLEDGE: Proficient in Auto CAD
EMPLOYMENT RECORD:
INCLUSIVE/DATE:
2014 – Present SIBS GROUP Commissioning Solution - QATAR
Main Projects: Hilton Hotel, National Museum, CMC, Sidra
Hospital & Rail (Red line north)
• Responsible for Inspection of Installation prior to commencement
of Testing & Commissioning for High and Low Voltage switch gear,
Motor Control Centers, Sub Main Distribution Boards and
Distribution Boards.
• On site Building Service Commissioning, Testing & Witnessing
• Generating Commissioning Test packs, Method Statement & ITP
for T&C.
• Preparations and checks of all the necessary materials, plant and
equipment to be used for the specified works and the same are
approved.
• Ensure that the equipment are inspected by the plant department
and are safe to use
• Ensure work place is kept organized and clean at all times. All
tools and equipment to be stored properly to prevent their
deterioration and avoid any safety incidents.

2. • Implement the ZERO ACCIDENT PROGRAM and follow HSE
recommendations.
INCLUSIVE/DATE:
2012 – 2013 SIEMENS – QATAR
Main Projects: Education City Project (HQ Building)
• Ensuring MEP works are carried out in accordance with the
schedule. Assist the inspection of completed works, rectifying the
snags.
• Maintain records of inspection.
• Review and approval of As-built drawing
• Implement the ZERO ACCIDENT PROGRAM and follow HSE
recommendations.
2011 – 2012 MUHIBBAH ENGINEERING – QATAR
Main Projects: New Doha International Airport.
• Review and approval of As-built drawing
• Responsible for Inspection of Installation prior to commencement
of Testing & Commissioning.
• Perform surveillance and monitoring of phases of quality control
work on each installations per specifications.
• Witness testing and review of results of test and inspections. Liaise
with consultant, client and subcontractors.
• Review of SAT, MS, Test procedures, As-built Drawings, Material
Submittals. Closing of snags with site engineers.
• Implement the ZERO ACCIDENT PROGRAM and follow HSE
recommendations.
2006 – 2011 LEIGHTON WLL. – QATAR
Main Projects: Al Shaqab Equestrian Centre (Education City)
• Responsible for Inspection of Installation prior to commencement
of Testing & Commissioning.
• Ensure all inspections and testing being carried-out is based on
the relevant approved ITP. All materials/equipment to be used are
approved and/or inspected relative to the scope of works.
• Witness testing and review of result of test and inspection.
2005 – 2006 THERMO LLC. – DUBAI
Main Projects: Dubai International Airport – Expansion Project phase 3
• Balancing of ventilation, A/C and CHW system
• Generation of TAB reports
• Witnessing of all test and inspection results to clients
representatives
1996 – 2005 SUMISETSU PHILIPPINES INC. – PHILIPPINES

3. Main Projects:
- Benguet General Hospital
- Mitsumi Building No.3
- Nidec Generator House
- EDSA LIGHT RAIL TRANSIT Line-1, Phase-1 (Depot Maintenance Bldg.)
& Edsa Lrt
- Ninoy Aquino International Airport
- International School of Manila
- Jae Philippines (Semi-conductor)
- Imasen Philippines (Semi-conductor)
- Sanyo Philippines (Semi-Conductor )
• Task to prepare construction drawings, plans as (ISD) Builders
work layout, power system, lighting system,
• Preparation of BMS / SCADA,ACCESS CONTROL SYSTEM shop
drawings
• Preparation MPC-P&ID DRAWINGS and other MEP services plan
and detail
• Initiate correction, edit and plotting of plans and contract drawings
procured from drawing offices in reference to company
standards and manuals.
• Prepares plan of primary containment layout, electrical layout,
miscellaneous installation details and other reference drawings.
• Provide technical support on integrated management team in
terms of providing details, section and coordination layouts of
services.
• In-charge for coordination of installation conflicts with other
diciplines.
PERSONAL INFORMATION:
DATE OF BIRTH : May 3, 1966
NATIONALITY : Filipino
EDUCATION : Bachelor of Science in Electrical Engineering
Feati University, Manila, Philippines
SEMINARS/TRAINING : Computer Aided Analysis & Design
ATTENDED
LANGUAGES & DEGREE : English-Proficient, written and oral
Filipino-Mother tongue
REFERENCE: Ms. Myrna Marzo – Senior ELV Engineer (Louise Berger)
Tel.: +97466829874
Mr. Grant Lemuel Ang – Senior Engineer (Leighton Contracting Qatar)
Tel.: +97477368176
Mr. Ruel Dela Cruz – Senior Engineer (HITACHI Engineering)
Tel.: +97466459610