The LowFlow JRDL Series line of diaphragm sensed, high pressure regulators have the ability to handle very high pressures and very low flows. These valves are typically used in research and sampling systems for general, corrosive and specialty gas and liquid service. Typical applications include gas chromatography and flame ionization detectors, as well as other industrial controls.
Magnatrol Valve provides high quality bronze and stainless steel solenoid valves, temperatures to 400F, pressures to 500 PSI, for control of water, oil, steam, air, gas, cryogenics, solvents, oxygen, and corrosive fluids.
The appeal of magnetic level indicator technology is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Magnetic level indicators eliminate leaking seals, clouded glasses and broken glass tubing, while providing easy-access cleaning and adaptation to a variety of mounting styles and process conditions.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
Steam traps are the hardest working components in the steam system. Maintenance or replacement of steam traps must be as quick and efficient as possible to avoid unnecessary disruption to related processes.
Traditional steam trapping assemblies often require the plant to be shut down for traps to be maintained or replaced taking significant time and reducing production output.
The PC3000 and PC4000 incorporate isolation valves, strainer, two-bolt steam trap connection and blowdown valves, all in a single unit for quick and easy installation and operation.
Spirax Sarco, leader in products and services for steam system management, released the PV4 and PV6 piston valves for isolation purposes. The valves are available in NPT and SW versions, from ½” to 2”. Bodies are available in forged carbon steel or forged stainless steel.
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems.
Manufacturing, Exporting and Supplying superior quality range of Industrial Valves, Pipe Fittings, Welding Industrial Olets, Tube Fittings and Gas Regulators. The offered products are manufactured using optimum quality raw material and sophisticated technology.
The Air Process heater will provide hot air and gas up to 1000 degree Fahrenheit (540 C) with infinite control by varying the voltage and air velocity supplied. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections.
Magnatrol Valve provides high quality bronze and stainless steel solenoid valves, temperatures to 400F, pressures to 500 PSI, for control of water, oil, steam, air, gas, cryogenics, solvents, oxygen, and corrosive fluids.
The appeal of magnetic level indicator technology is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Magnetic level indicators eliminate leaking seals, clouded glasses and broken glass tubing, while providing easy-access cleaning and adaptation to a variety of mounting styles and process conditions.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
Steam traps are the hardest working components in the steam system. Maintenance or replacement of steam traps must be as quick and efficient as possible to avoid unnecessary disruption to related processes.
Traditional steam trapping assemblies often require the plant to be shut down for traps to be maintained or replaced taking significant time and reducing production output.
The PC3000 and PC4000 incorporate isolation valves, strainer, two-bolt steam trap connection and blowdown valves, all in a single unit for quick and easy installation and operation.
Spirax Sarco, leader in products and services for steam system management, released the PV4 and PV6 piston valves for isolation purposes. The valves are available in NPT and SW versions, from ½” to 2”. Bodies are available in forged carbon steel or forged stainless steel.
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems.
Manufacturing, Exporting and Supplying superior quality range of Industrial Valves, Pipe Fittings, Welding Industrial Olets, Tube Fittings and Gas Regulators. The offered products are manufactured using optimum quality raw material and sophisticated technology.
The Air Process heater will provide hot air and gas up to 1000 degree Fahrenheit (540 C) with infinite control by varying the voltage and air velocity supplied. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Connector and Tubing Technical Guide – Parker Hannifin Instrumentation Products Division North America and Europe. Covers
Download here - http://www.parker.com/literature/Instrumentation%20Products%20Division%20Europe/CTS%20TECH%20GUIDE%20BOOK.pdf
ndex
A-LOK
®
Principle
2
CPI™ Principle
3
Assembly instructions
for A-LOK
®
/CPI™
4-5
How to identify metric fittings
5
Gaugeability instructions
for A-LOK
®
/CPI™
6
Tube insertion and bend allowance
length for A-LOK
®
/CPI™
7
PHastite
®
Principle/Benefits
8-9
Assembly instructions
for PHastite
®
10-11
Tube Markers
12-13
MPI™ Principle
14
Assembly instructions for MPI™
15-16
Gauging
16
Suparcase
®
17
Connector raw material table
18-19
Heat Code traceability
20
Parker grade tubing overview
21-23
Parker tubing Part no’s.
23-24
Tube selection and pressure tables
25-42
Tubing vs Piping
43-44
Common cause of
imperfect bends
45
Routing of tubing bends
45-47
Tubing preparation
48-49
Tubing fabrication equipment
50-53
Visual index A-LOK
®
/CPI™
54-61
Visual index PHastite
®
62-63
Visual index MPI™
64-68
A-LOK
®
and CPI™ connector
selection pages
69-119
PHastite
®
connector selection
pages
120-129
MPI™ connector selection pages
130-143
WARNING user responsibility. Failure of improper selection or improper use of the products described herein or related items can cause death personal injury and property damage.
.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or systems options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Parker’s product selection guide CD contains electronic versions of all catalogs referenced in the product selection guide document as well as additional Parker
Instrumentation product lines.
Applications oil industry: Wellhead control panels, chemical injection skids, hydraulic control packages, gas compression skids, offshore and onshore. Highly reliable devices utilizing the Custom Control Sensors Dual-Snap® Belleville disc spring principle. Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications. Turck® connector provides superior ingress protection. Hermetically sealed electrical assembly for environmental protection. No electrical junction box required.Rigid, compact and internally adjustable for convenient field set point adjustment. Repeatable and stable set points.
Vibration and shock resistant. High cycle life. High over-pressure capability. Various options for wetted materials and electrical ratings to meet a wide range of application requirements and media compatibility.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Converting from one signal type to another is a common challenge in process control. When the application calls for conversion from an electrical signal, current or voltage, to a pneumatic signal (pressure), this calls for an I/P or E/P transducer.
BARTON 7000 Series liquid turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than 40 years of turbine manufacturing experience, this built-to-order series features a range of sizes, materials, bearing systems, and options.
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Truelok Valves & Fittings, a business unit of cMAX-2000, Inc., offers UHP valves, face seal/ weld fittings, compression tube fittings and instrumentation valves, for semiconductor and instrumentation industry.
Quality with Measureable Difference
High Purity Diaphragm and Bellows sealed valves, Face Seal Fittings, Mini Weld Fittings and Tube Fittings and Instrumentation Ball Valves undergo a stringent quality process system to ensure the final product meet intended specifications. Internal surface finish of High Purity Fittings and Valves is <5Ra that guarantees outstanding performance of High Purity Gas Delivery Systems used in the semi-conductor industry and measurement instrumentations to certify the purity and integrity of gases. All valves and fittings are individually inspected to ensure they meet established quality standards.
Cost Effective Solution
While maintaining stringent quality, Truelok provides cost effective solution with well established and internationally recognized US brand of valves and fittings. Truelok Face Seal Fittings are form fit and function to VCR* style fittings. Truelok Tube Fittings are compatible with other double ferrule compression type tube fittings.
Quick Delivery
A significant inventory level of all products ensures the same day shipment of most orders.
Customized Fittings Designs
Truelok offers built to print custom designed fittings with no quantity restrictions with shortest possible lead time. Custom designed fittings are made with face seal or tube fittings connections. Contact us for your specific requirements.
Material
Face Seal & Mini Weld Fittings and UHP Diaphragm & Bellows Valves are manufactured with 316L stainless steel. Product in other materials such as VAR, AOD/VAR, VOD/VAR or VIM/VAR and various alloys are also available to meet specific applications. Compression Tube Fittings and Instrumentation Ball Valves are manufactured in 316 stainless steel.
www.truelok.us
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Connector and Tubing Technical Guide – Parker Hannifin Instrumentation Products Division North America and Europe. Covers
Download here - http://www.parker.com/literature/Instrumentation%20Products%20Division%20Europe/CTS%20TECH%20GUIDE%20BOOK.pdf
ndex
A-LOK
®
Principle
2
CPI™ Principle
3
Assembly instructions
for A-LOK
®
/CPI™
4-5
How to identify metric fittings
5
Gaugeability instructions
for A-LOK
®
/CPI™
6
Tube insertion and bend allowance
length for A-LOK
®
/CPI™
7
PHastite
®
Principle/Benefits
8-9
Assembly instructions
for PHastite
®
10-11
Tube Markers
12-13
MPI™ Principle
14
Assembly instructions for MPI™
15-16
Gauging
16
Suparcase
®
17
Connector raw material table
18-19
Heat Code traceability
20
Parker grade tubing overview
21-23
Parker tubing Part no’s.
23-24
Tube selection and pressure tables
25-42
Tubing vs Piping
43-44
Common cause of
imperfect bends
45
Routing of tubing bends
45-47
Tubing preparation
48-49
Tubing fabrication equipment
50-53
Visual index A-LOK
®
/CPI™
54-61
Visual index PHastite
®
62-63
Visual index MPI™
64-68
A-LOK
®
and CPI™ connector
selection pages
69-119
PHastite
®
connector selection
pages
120-129
MPI™ connector selection pages
130-143
WARNING user responsibility. Failure of improper selection or improper use of the products described herein or related items can cause death personal injury and property damage.
.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or systems options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Parker’s product selection guide CD contains electronic versions of all catalogs referenced in the product selection guide document as well as additional Parker
Instrumentation product lines.
Applications oil industry: Wellhead control panels, chemical injection skids, hydraulic control packages, gas compression skids, offshore and onshore. Highly reliable devices utilizing the Custom Control Sensors Dual-Snap® Belleville disc spring principle. Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications. Turck® connector provides superior ingress protection. Hermetically sealed electrical assembly for environmental protection. No electrical junction box required.Rigid, compact and internally adjustable for convenient field set point adjustment. Repeatable and stable set points.
Vibration and shock resistant. High cycle life. High over-pressure capability. Various options for wetted materials and electrical ratings to meet a wide range of application requirements and media compatibility.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Converting from one signal type to another is a common challenge in process control. When the application calls for conversion from an electrical signal, current or voltage, to a pneumatic signal (pressure), this calls for an I/P or E/P transducer.
BARTON 7000 Series liquid turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than 40 years of turbine manufacturing experience, this built-to-order series features a range of sizes, materials, bearing systems, and options.
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Truelok Valves & Fittings, a business unit of cMAX-2000, Inc., offers UHP valves, face seal/ weld fittings, compression tube fittings and instrumentation valves, for semiconductor and instrumentation industry.
Quality with Measureable Difference
High Purity Diaphragm and Bellows sealed valves, Face Seal Fittings, Mini Weld Fittings and Tube Fittings and Instrumentation Ball Valves undergo a stringent quality process system to ensure the final product meet intended specifications. Internal surface finish of High Purity Fittings and Valves is <5Ra that guarantees outstanding performance of High Purity Gas Delivery Systems used in the semi-conductor industry and measurement instrumentations to certify the purity and integrity of gases. All valves and fittings are individually inspected to ensure they meet established quality standards.
Cost Effective Solution
While maintaining stringent quality, Truelok provides cost effective solution with well established and internationally recognized US brand of valves and fittings. Truelok Face Seal Fittings are form fit and function to VCR* style fittings. Truelok Tube Fittings are compatible with other double ferrule compression type tube fittings.
Quick Delivery
A significant inventory level of all products ensures the same day shipment of most orders.
Customized Fittings Designs
Truelok offers built to print custom designed fittings with no quantity restrictions with shortest possible lead time. Custom designed fittings are made with face seal or tube fittings connections. Contact us for your specific requirements.
Material
Face Seal & Mini Weld Fittings and UHP Diaphragm & Bellows Valves are manufactured with 316L stainless steel. Product in other materials such as VAR, AOD/VAR, VOD/VAR or VIM/VAR and various alloys are also available to meet specific applications. Compression Tube Fittings and Instrumentation Ball Valves are manufactured in 316 stainless steel.
www.truelok.us
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Emerson Avstängningsventiler broschyr - ASKALON ABAskalon AB
Alla Emersons avstängningsventiler i samma broschyr - ASKALON AB
Vridspjäll, skjutspjäll, kulventiler, kilslid, kalottventiler, kägelventiler, kalottventiler samt slussventiler och backventiler av kända ventilfabrikat från Emerson så som:
Keystone, Sempell, KTM, Vanessa, FCT, Neotechna, Clarkson och Virgo.
Försäljning av ventiler och ventilservice av Askalon AB 054-579200 sales@askalon.se
Jordan MK75PTP Sliding Gate Control ValveSwanson Flo
The Jordan Mark 75PTP is a Mark 75 wafer style control valve with an 80mm (1" - 2") Stainless Steel Piston Actuator. The Gemu cPOS Smart Positioner is standard and required for control applications. For on/off service, the valve may supplied without a positioner. JVCV Should be used for sizing selection.
GEMS offers a choice of pressure switches, from compact cylindrical
models for OEM use, to larger, enclosed units for rugged process
applications. These switches are ideal for the filtering process of
coolants in the machine tool industry, use in transmissions of
off-highway vehicles and as redundant systems with existing monitors
such as transducers.
Lined Ball Valves Provide Corrosion ProtectionCTi Controltech
Flowserve is the world's leader in the design and manufacture of corrosion resistant fluoropolymer lined valves. Flowserve Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly.
The GS valve is a high performance variable orifice control valve. Known as a sliding gate valve, the GS3 seat design features a non turbulent, straight through flow path. The flow is broken apart into multiple streams creating a reduced field of energy. The result is greater service life, quieter operation and a control valve that performs at the highest levels possible within extreme conditions. Maximized temperatures and pressures, 986 F and 1,450 psi. Sizes 1/2″ – 10″ (DN 15 – 250) Carbon Steel and 316 Ti Stainless Steel, and Hastelloy C4 in select sizes.
Similar to JRDL Low Flow Pressure Regulator Valve (20)
PID is short for "proportional plus integral and derivative control", the three actions used in managing a control loop. Process loop controllers use one, two or all three of these to optimally control the process system. PID control is used in a wide variety of applications in industrial control and process system management.
Courtesy of Eurotherm. Eurotherm offers a wide range of single & multi-loop PID controllers.
Smokeless Flares
Smokeless flares incinerate flammable hazardous vent gas with the assistance of supplemental high-velocity air or steam to prevent the formation of soot or smoke. Excessive injection of air or steam reduces combustion efficiency, resulting in the release of hazardous VOC gases. Meanwhile, inadequate injection of air or steam results in the formation of undesirable soot and smoke. Although modern flares are designed for high flow rates associated with an emergency condition, they most commonly operate at high-turn-down, low-flow rates, making it challenging for the flare to operate at optimal combustion efficiency.
Pilot Monitor
Flammable vent gases are ignited by a pilot flame when released into the atmosphere by refineries, natural gas processing plants, and petrochemical plants. The proper incineration of these gases is a critical safety and environmental concern. Therefore, it is essential to confirm that the pilot is lit at all times. Monitoring via a thermocouple is common, however, failures frequently occur and replacements can require costly process shutdowns. Remote sensing IR technology (PM) is the superior alternative.
Flame Intensity Monitors
Williamson Flame Intensity Monitors (FI) are the single-wavelength sensors of choice for a variety of flare applications where the more sophisticated dual-wavelength flare products are not appropriate or are not required.
Some materials can be difficult or near impossible to measure with precision using single-wavelength or ratio pyrometers because of their complex emissivity characteristics. These types of materials are called non-greybody materials and their emissivity varies with wavelength.
Multi-wavelength pyrometers use application specific algorithms to characterize infrared energy and emissivity across the measured wavelengths to accurately calculate both the actual temperature and emissivity of these complex non-greybody materials.
The 3000 series gives you high accuracy, fast response time and low temperature drift – without compromise. All 6 mm devices can be mounted on a standard DIN rail or power rail with no air gap separation.
Bronkhorst has over 35 years experience in designing and manufacturing precise and reliable measurement and control equipment and the widest range of mass flow and pressure meters and controllers available on the market.
Bronkhorst offers innovative solutions for many different applications across a great many different markets, and has a particular strong wealth of knowledge and reputation within the plastics and rubber market.
The Coriolis measuring principle refers to the effect that a moving mass has on a body in a rotating frame of reference. The moving mass exerts an apparent force on the body, causing a deformation. This force is called the Coriolis force. It does not act directly on the body, but on the motion of the body. This principle is used in Coriolis flowmeters.
AP Tech is a manufacturer of gas handling components – primarily pressure regulators and valves. AP Tech’s competitive advantage are products that deliver specialty gases for high purity through ultra high purity applications. Starting from the source vessel to point of use and into the process tool or equipment itself, AP Tech products are known to deliver gases with uncompromising quality, performance and reliability.
The L100 Bubble-Tube Level System is a fully self contained instrument, requiring only connections to air or gas supply, dip tube and electrical power source to provide precise level indication. Because only the stationary dip tube and the purge gas come in contact with the liquid, this system is ideal for applications involving hazardous locations or liquids which are highly corrosive, viscous, hot, (molten metal), explosive, slurry type or foodstuff.
For applications where rapid transition from open to closed positions is warranted, the Mark 76 is a solid choice. Designed with a short stroke and straight through fluid path, the Mark 76 also incorporates other features to assure good service for process operations using on/off control.
Tek-Trol provides process measurement and control products for Flow, Level, Temperature and Pressure measurement and Control Valves and Analyzers systems for the Process, Power and Oil and Gas Industries.
EL-FLOW Prestige is the next generation of Bronkhorst Mass Flow Meters / Controllers for gases. Nearly all core components have been redesigned and many improvements and innovations have been incorporated. With this new series Bronkhorst introduced the “Differential Temperature Balancing” technology, ensuring a superb sensor stability.
Each ReFlexIO unit allows you to connect (2) Analog Inputs and (2) Digital Inputs which are wirelessly transferred to (2) Analog Outputs and (2) Digital Outputs on the other end. The 2 ReFlexIO 'paired' units work bi-directionally, so it's possible, for example, to turn on a relay (digital input to digital output on the other end) and get a signal back (digital input to sense replay closure returned to digital output on the original sending unit) to turn on a light telling you that the relay is indeed on.
The T2750 PAC hardware provides high-performance control with cost-effective redundancy options in a versatile modular system. Powerful instruments, the control units, and the I/O system form the basis of a complete distributed control and recording environment. This environment is capable of continuous analog, logic, sequential control, batch management, secure data recording at point of measurement, and setpoint programming.
The T2550 PAC is a high performance solution offering extremely cost effective redundancy options - making high availability viable for more of your process.
The control unit and I/O system form the basis of a complete distributed control and recording environment capable of continuous analog, logic and sequential control combined with secure data recording at point of measurement - all designed to maximize Return on Investment (ROI) from your process.
ControlAir Inc. is a leading manufacturer of precision air pressure regulators, I/P transducers, E/P transducers, P/I transducers, valve positioners, air relays, volume boosters, air filter regulators and frictionless diaphragm air cylinders.
The Model TCL measures total chlorine in water, and is ideal for seawater chlorine analysis applications. The system consists of a sample conditioning unit, a sensor, and transmitter
The EL2200 series of electromagnetic flowmeters represent the state of the art for the accurate measurement for water cycle and process applications. This new generation flowmeter utilizes an innovative structure to route the electromagnetic signal generated by the electrodes, providing a flowmeter with an extremely wide measurement range. The new EL Series meters are capable of a measurement range up to 1000:1.
The new PowerVUE™ design utilizes the same rugged Hagan actuator and frame construction, combined with the accuracy and reliability of the Fisher FieldVUE DVC6000 Digital Valve Controller. The pneumatic power positioner remains the most reliable and cost-effective method of actuation. Torque ranges are from 400 ft-lbs to 4,600 ft.-lbs.
Advanced Cooling Technologies, manufacturer of specialized heat transfer equipment including heat pipes and industrial enclosure coolers, collaborated with a local children's science museum to produce a hands on learning exhibit. The exhibit illustrates principals of heat transfer.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
1. JRDL Series
Gas Pressure Reducing Valves
A Division of
Jordan Valve
3170 Wasson Road
Cincinnati, OH 45209
toll free. 800.543.7311
local. 513.533.5600
fax. 513.871.0105
www.lowflowvalve.com
PRESSURE REGULATING VALVE
The LowFlow JRDL Series line of diaphragm sensed, high pressure regulators have the ability to
handle very high pressures and very low flows. These valves are typically used in applications
such as high pressure gas, water seal regulation, air compressors, gas chromatography and more.
Features:
• Barstock construction guarantees material integrity and surface finish
• High flow rate coupled with high rangeability reduces need for reduced trim sizes
• Optimized internal volume
• Soft seat material for ANSI Class VI shutoff
Product Highlights
• Ability to reduce high inlet pressures from 1-400 psig in one valve
• Provides superior sensitivity in pressure regulation to the ‘piston’ operated JRPL, and has a
CV that’s nearly 10x greater than the 0.2 CV in the JR
• Sizes available: ½”, ¾”, 1”
• Diaphragm Sensed- Buna, EPDM, and Viton options
Applications
• High Pressure Gas
• Liquid Pump Systems Control
• Water Seal Regulation
• Hyperbaric Chambers
• Air Compressors
• Pressurized Ballast Tanks
• Gas Transfer Systems
• Gas Chromatography
• Flame Ionization
a d i v i s i o n o f J o r d a n V a l v e
2. JRDL SERIES SPECIFICATIONS
Line Size: 1/2", 3/4" & 1" (DN15, DN20 & DN25)
End Connections
• Threaded
• Socket Weld
• Flanged
Soft Seat Materials for ANSI Class VI Shut-off
• Buna-N to + 200°F (93°C)
• EPDM to + 240°F (143°C)
• Viton to + 450°F (232°C)
Body Material
• 316L SST - Standard
• Contact factory for other body / trim / seat materials
Diaphragm Material: Buna-N / EPDM / Viton
Maximum Inlet Pressure: 1000 psi (69 bar) @ -20°F (-28,9°C)
Flow Capacity: Cv 1.7 (1,46 Kv)
Maximum Pressure Drop: 1000 psi (69 bar)
Spring Ranges:
• 0 – 50 psi (0,00 – 3,4 bar)
• 0 – 100 psi (0,00 – 6,9 bar)
• 0 – 200 psi (0,00 – 13,8 bar)
• 0 – 400 psi (0,00 – 27,6 bar)
Options
• Panel Mounting
• Captured Vent
• Locking Wire
• Tamper Proof
• Lockout Device
-2-
SPECIFICATIONS
OPTIONS & DEFINITIONS
Panel Mount The panel mount feature utilizes a threaded spring housing and a panel mount ring to secure the regulator to an
instrument panel. This option requires a 2" panel cut out.
Captured Vent The captured vent design provides maximum safety for the user when handling toxic or hazardous media. It features a
1/8" FNPT port located on the spring housing. The user can easily tube this vent to a safe location. This option can be incorporated into
a self-relieving regulator that provides an additional port to permit the safe expulsion of hazardous media.
Locking Wire The locking wire option utilizes a lead sealed metal wire to physically hold the adjusting screw in place to prevent any
unwanted set point changes.
Tamper Proof The tamper proof option replaces the standard adjusting knob with a stainless steel acorn nut.
Lockout Device The lockout device is a 2 piece polypropylene enclosure which encapsulates the adjustment knob and prevents
unwanted set point changes. The part number required for this valve is 26971. (Lock not included)
3. 32 rms Mechanical finish –
standard
Optimized internal volume
Fine thread pitch for precision
setpoint adjustments
-3-
SPECIFICATIONS
JRDL FEATURES & BENEFITS
Barstock construction
w/ alloys available
Multiple spring ranges for
your required set points
Balanced trim design
allows for higher flows
BUNA/EPDM/VITON
Soft Seat provides
ANSI Class VI Shutoff
In line removable plug/trim for
quick cleaning & trim replacement
BUNA/EPDM/VITON Diaphragm
- high set points
- diaphragm sensed for superior
accuracy and better regulation
4. JRDL SERIES DIMENSIONS
• JRDL Series, Inches
• JRDL Series, Metric
-4-
* Gage ports are 1/4" FNPT; Consult factory for other porting options
JRDL SERIES FLOW CONFIGURATIONS
Top View
SPECIFICATIONS
inletoutlet A outlet inlet
outlet gage
B outlet inlet
outlet gage
C
outlet inlet
inlet gage
D outlet inlet
outlet gage
inlet gage
E SAMPLEoutlet inlet
270°
90°
C
B
A
VALVE SIZE
DIMENSIONS, INCHES WEIGHT,
LBSA B C
1/2" 2.8 2.1 7.5 7.5
3/4" 3.2 1.8 7.5 9.6
1" 3.2 1.8 7.5 9.5
VALVE SIZE
DIMENSIONS, MM WEIGHT,
KGSA B C
DN15 71.1 53.3 190.5 3.40
DN20 81.3 45.7 190.5 4.35
DN25 81.3 45.7 190.5 4.31
5. 16 SEP Compliance
G SEP Compliant
0 None
Z Non-Standard
9 & 10 Diaphragm
BB Buna-N
EE EPDM
VV Viton
ZZ Non-Standard
11 & 12 Actuator
SK Standard
PM Panel Mount
TP Top Mount
ZZ Non-Standard
17 Accessories
S Clean for Oil Free
X Clean for Oxygen
0 None
Z Non-Standard
7 & 8 Range Spring/Outlet Pressure
E1 0 - 50 PSI
E2 0 - 100 PSI
E3 0 - 200 PSI
E4 0 - 400 PSI
ZZ Non-Standard
Model Size Material 1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 14 15 16 17
— —
Model
JRDL Low Range
Material
6L Stainless Steel 316L
1 & 2 Body Feature
End Connection Port Configuration
C FNPT 1/2" A Port "A"
D FNPT 3/4" B Port "B"
E FNPT 1" C Port "C"
F BSPP 1/2" D Port "D"
G BSPP 3/4" E Port "E"
H BSPP 1"
ZZ Non-Standard
3 & 4 Trim
BB Buna-N
EE EPDM
VV Viton
ZZ Non-Standard
5 & 6 Seat
BB Buna-N
EE EPDM
VV Viton
ZZ Non-Standard
JRDL SERIES ORDERING SCHEMATIC
Size
050 1/2" (DN15)
075 3/4" (DN20)
100 1" (DN25)
13 & 14 Inlet Gauge
HH 0 - 600 PSIG/BAR (Dual)
JJ 0 - 1000 PSIG /BAR (Dual)
KK 0 - 2000 PSIG/BAR (Dual)
NN None
ZZ Non-Standard
15 Outlet Gauge
B 0 - 60 PSIG/BAR (DUAL)
C 0 - 100 PSIG/BAR (DUAL)
D 0 - 160 PSIG/BAR (DUAL)
E 0 - 200 PSIG/BAR (DUAL)
F 0 - 300 PSIG/BAR (DUAL)
G 0 - 400 PSIG/BAR (DUAL)
H 0 - 600 PSIG/BAR (DUAL)
N None
Z Non-Standard
SPECIFICATIONS ORDERING SCHEMATIC
-5-JRDL/1017