Jigar Kotadiya has over 2 years of experience in highway engineering consultancy. He has expertise in DPR preparation, highway geometric design, pavement design, and working with Civil 3D software. Currently he is looking for opportunities in highway design roles. His experience includes projects related to DPR preparation for state highways and national highways in various states, pavement design and overlay analysis using IRC standards and software tools, geometric design of highways and flyovers using Civil 3D, and preparation of detail project reports. He holds an MTech in Transportation Engineering and Planning from SVNIT Surat and BTech in Civil Engineering from BVM Vallabh Vidyanagar.
Civil engineer +MBA . More than 25 years experience in Infrastructure development projects, Development of Industrial corridors and Project Management.
1. JIGAR KOTADIYA
SURAT ▪ +91-7874542899 ▪ jigar_kotadiya@yahoo.com
INTRODUCTION
Jigar started his career with Highway engineering consultancy and dedicated crucial 2 year. Jigar has an experience of 2
year in DPR preparation, Highway Geometric Design and Pavement Design. Currently he is looking for an opportunity in
highway design roles in design hierarchy.
SKILLS
• Sound knowledge of performing designs of Highways in Civil 3D Software
• Knowledge of Pavement design, Pavement Materials and Overlay Analysis based on IRC standards and
FWD data using IITPAVE, KenPave and KGPBACK
• Basic knowledge of VISSIM and MX Road
WORK EXPERIENCE
1. Feedback Infra Pvt Ltd. – Gandhinagar July, 2018 – Present
Deputy Design Engineer- Highways
• Project I: DPR for SH and MDRs Under Axom Mala Group 1,2 and 5
Responsibilities:
o Conversion of MX file to Civil 3D file for the reports of alignment.
o Taking out tree offset report along the alignment in Civil 3D.
o Preparation of Reports, Widening Schedule, Road Furniture Plan and Calculation of Road Furniture
Quantities
Softwares: Civil 3D
• Project II: DPR for Two Laning of Yingkiong to Bishing (Porgo Via Gette-Pugging-Likor-Paling-Jido)
Road in Arunachal Pradesh
Responsibilities:
o Generation of Cross-section of the ground at the stream location along the alignment
Softwares: Civil 3D
• Project III: Technical Assistance to Gujarat State Road Development Corporation
Responsibilities:
o Geometric Design of a Flyover with service road at Shravan Chowk on Bharuch-Dahej State Highway
(SH-6), Gujarat
o Preparation of Subassembly according to new IRC Standards
o Preparation of Plan and Profile Drawings
o Vehicle Path Movement of Standard Vehicle using CadTools For Shravan Chowk Junction Improvement
o FWD Survey and Overlay Estimation of Bharuch-Dahej State Highway (SH-6), Gujarat
o Toll Plaza Layout for Bardoli-Surat National Highway (NH-6)
o Review of Overlay Estimation by Benkelman beam survey of Bhuj- Nakhtrana State Highway (SH-42) at
Gujarat
Softwares: Civil 3D, Subassembly Composer, KGPBACK, IITPAVE, CadTools
• Project IV: Four laninng of Jajiwal (Km. 283.500 of NH 62 Nagaur road) to Dangiyavas section - Package-
II (design length 29.806 km ) of Jodhpur ring road (In principally declared NH) in the state of Rajasthan
on EPC Mode under NHDP Phase-VII
Responsibilities:
o Study of various types of alignment options
o Finalization of alignment by interaction with client
o Geometric Design of RingRoad Section-II
o Finalization of Crash Barrier location
2. o Finalization of Toll Booths locations for Closed Tolling
o Preparation of Road Furniture Plan
o Preparation of Detail Project Report and Technical Schedule
Software: Civil 3D
• Project V: Feasibility Report cum Preliminary design for upgradation of NH-158 connecting to
Ras- Beawar-Mandal in the state of Rajasthan (World Bank Funded)
Responsibilities:
o Preparation of Typical Cross Section
o Finalization of retaining Structure locations
o Incorporations of Road Safety Measureso Pavement Design Using IIT Pave
o Finalization of Rain Water Harvesting Pits locations using Civil 3D
o Preparation of Land Acquisition documents
Software: Civil3D, IITPAVE
• Project VI: Detail Design of Jharpokhria - Baripada – Baleshwar Section of NH-5 (Length = 80.6 Km) In
State of Orissa Under NHDP-IV to be Executed on EPC Mode
Responsibilities:
o Preparation of Profile for Minor Junctions
o Preparation of Typical Cross Section
o Review of Junction Improvement and Road Furniture Plan
Software: Civil 3D
• Project VII: Detail Design of Bhopal – Sanchi Section of NH-86 (Length =53.775 Km) In State of Madhya
Pradesh Under NHDP-III to be Executed on EPC Mode
Responsibilities:
o Review of Junction Improvement and Road Furniture Plan
• Project VIII: Consultancy Services for Feasibility Study and Preparation of DPR Improvement and
Up- Gradation of “In-Principle Declared (A) Khambhaliya –Advana – Porbandar Road, (B) Khambhaliya
– Bhanwad – Ranavav (up to Junction of NH-8B), (C) Porbandar –Bhanvad – Jamjodhpur – Kalawad Road
as New National Highway In The State Of Gujarat.
Responsibilities:
o Study of various types of alignment options
o Preparation of Horizontal Alignment of Khambhaliya – Advana – Porbandar highway Section
Software: Civil 3D
• Site Appreciation Survey for pre-bids of various projects
EDUCATION
Sardar Vallabhbhai National Institute of Technology, Surat 2016 – 2018
Master of Technology – Transportation Engineering and Planning with 8.63 CGPA
• Research Thesis entitled - “Utilization of EAF Steel Slag in Open Graded Friction Course”
• Attended 12 days GIAN Course of “Building Resilient and Sustainable Roadway Infrastructure” conducted
During
12-23 December, 2016 by Dr. A. Veeraragavan, IIT Madras and Prof. Rajib Malick, Worcester
Polytechnic
Institute, USA at IIT Madras
• Consultancies During M.Tech:
o Traffic Study and Junction Improvement Scheme of Sahara Darwaja, Surat
o Marshall Mix Design of DAC for Ahmedabad Airport
o Design of Flexible, Rigid Pavement and overlay design by Benkelman Beam Deflection method for SH-
62 and MDR-106, Rajasthan
o Signal Design for Bardoli Intersection on SH-88, Bardoli, Gujarat
3. Birla Vishwakarma Mahavidyalaya, Vallabh Vidyanagar 2011 – 2015
Bachelor of Technology in Civil Engineering with 7.03 CGPA
INTERESTS AND ACHIEVEMENTS
• Academic/Personal Achievements –
o 2nd Prize In “Project Expo” At BVM-2015; BVM, Vallabh Vidyanagar for experimental study on
“Improvement of Bearing Capacity of Loose Soil by Different Soil Replacement Techniques”
• Extra-Curriculum Achievements –
4. o Runners up in GTU Inter-Zonal Football Tournamnent,2013 at SCET, Surat.
o Runners up in Zest Football Tournament, 2013 at COEP, Pune.
o Represented SVNIT Football Team at Inter- NIT Summit- 2016 at NIT, Agartala.
o Represented Surat District Football Team in Subrato Mukrji Cup ,2008 at U-14 level.
• Interests –
o Highway Geometric Design
o Transport Planning
o Football
I hereby declare that the information provided above is true.
DATE: SIGNATURE: