Increasing concerns about dependence on fossil fuels has generated r.pdf
•
0 likes•2 views
Increasing concerns about dependence on fossil fuels has generated research and development of renewable fuels, such as ethanol. Ethanol can be produced from grains (for example, corn) or from plant biomass (tree chips and sawdust, composted food waste or paper products). The production of ethanol is an industrial application of fermentation studied in introductory biology laboratories. Using information from your laboratory experiments, propose the components necessary for converting corn to ethanol. (Consider reactants, products, and environmental conditions). Corn plants store energy as starch, which cannot enter the fermentation pathway directly. Based on your knowledge of the molecular structure of starch, include components necessary to convert starch to simple sugars. Solution Ethanol production from corn is a very recent and important bio-chemical process which can be used as an environmental friendly way to generate fuel. The method is simple and requires following inputs: 1. Corn source: Freshly isolted corn bolts are required for the process with sufficient water content. The dried up corn bolts are difficult to hydrolyze by enzymatic actions. 2. Enzymes: Sequential degradation of the corn\'s carbohydrates and sugar is brought about by activity of various enzymes. Firstly, the corn is milled into smaller pieces in liquid media which is acted upon by enzyme amylase. The amylase enzyme degrades the complex sugars into smaller carbohydrate units which can be further digested by other carbohydrate digesting enzymes. 3. Fermentation: After activity of amylase, yeast mediated fermentaion of corn is performed. This fermentation is performed under controlled environment of oxygen and temperature along with humidity and nutrients. Bio-chemically, the glucose derived from amylase action on the corn is converted into pyruvate while generating 2 molecules of ATP per glucose molecule and generation of two molecules of NADH. This pyruvate can enter glycolysis in the yeast and simultaneously fermented into acetaldehyde and generation of ethanol with consumption of two NADH molecules. Carbon dioxide is released as a by-product. Thus, this explains the utilizty of various enzymes and microbes in ethanol fermentation by yeast to generate ethanol under controlled environment..
Report
Share
Report
Share
Download to read offline
Recommended
Biofuel precursor from potato waste
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Biofuel precursor from potato waste
Abstract Depleting fossil fuels and alarming rise in levels of green house gases in the atmosphere has forced for the search of alternative renewable sources of energy. With agricultural activities spreading across the globe, biomass residue generated can indeed form a useful energy source. And also the ‘wastes’ from specific kinds of agricultural industries have great potential to be converted into fuels. Biofuels especially ethanol produced from biomass has already received world wide attention and along with solving energy problems it is also proved to be environmental friendly. Since ours is an agricultural country where agricultural wastes are dumped in large volumes, ethanol derived from biomass may serve as a viable option. And stream pollution by waste effluents from food processing plants has also become one of the major importances in today’s world. The potato starch processing industry contributes considerably to this problem. The objective of this work is utilization of the waste i.e starch which is an effluent of various processes of a ,potato starch processing industry, by converting the starch into ethanol which can be used as an energy source for that particular industry itself. While sugar based raw materials like cane juice or molasses can be directly fermented, a two step process needs to be followed for the production of alcohol from starch based raw materials. The starch is liquefied using alpha-amylase and then saccharified using amyloglucosidase. The fuel ethanol is recovered by distillation after anaerobic fermentation using yeast primarily species of Saccharomyces cerevisia. The process described would reduce the amount of waste and ethanol used as energy source would cover the cost of the process. Further improvement in the process is being developed by changing the reaction environment to increase the rate constant of the reactor system.
Ethanol production
In this presentation I'm explaining about the production and processing of Ethanol from agricultural wastes and usage of ethanol as a fuel for engines. Also explained about the advantages and disadvantages of ethanol process and an detailed explanation about ethanol process.
Energy plantations for ethanol and biodiesel
This document discusses energy plantations for ethanol and biodiesel production. It begins by introducing that sugarcane, sweet sorghum, and sugar beet are used to produce ethanol through fermentation of their sugars. Starch from crops like maize and wheat can also be converted to sugar for ethanol production. The document then discusses advantages like renewability and lower emissions of ethanol fuel. It notes India's aim to increase ethanol blending in gasoline. Methods of biodiesel production through transesterification of oils are outlined. Challenges of ethanol and biodiesel like land use and affordability are also summarized.
Production of ethanol
1. Ethanol can be produced from various sources including sugary and starchy crops through fermentation. Common feedstocks include corn, sugarcane, wheat, and cellulosic biomass.
2. Ethanol is produced through fermentation of sugars by yeast. Starch from crops must first be converted to sugars before fermentation. New technologies allow production from non-edible cellulosic sources.
3. Ethanol has various uses including as a fuel additive or substitute for gasoline, as well as a solvent. While it can reduce greenhouse gas emissions compared to gasoline, ethanol also has disadvantages including lower energy content than gasoline.
Bio-ethanol ppt Rajesh Kumar Kushwaha
This document discusses bioethanol production technology and its prospects. It begins by defining bioethanol as ethanol derived from agricultural sources rather than petrochemical sources. The document then discusses the benefits of bioethanol such as reduced dependence on crude oil, being a renewable fuel, and reducing air pollution. It describes the raw materials and basic steps involved in bioethanol production. The document provides details on various pretreatment and hydrolysis methods as well as microorganisms used such as Saccharomyces cerevisiae and discusses prospects for improving cellulosic ethanol production.
Food fermentation
Fermentation in food processing is the process of converting carbohydrates to alcohol or organic acids using microorganisms—yeasts or bacteria under anaerobic conditions.
Or
Any metabolic process that releases energy from a sugar or other organic molecule, does not require oxygen or an electron transport system, and uses an organic molecule as the final electron acceptor
Fermentation usually implies that the action of microorganisms is desired.
The science of fermentation is known as zymology.
in microorganisms, fermentation is the primary means of producing ATP by the degradation of organic nutrients anaerobically
Traning material
This document provides an overview of biological conversion technologies for converting forest and wood biomass into energy and chemicals, with a focus on anaerobic digestion. It describes the basic process of anaerobic digestion, which involves three steps: hydrolysis, acidification, and methane formation carried out by different types of bacteria. Key factors that influence biogas production are also outlined, such as temperature, pH, nutrient availability, and retention time. Different types of biogas digesters are described, including batch, continuous, and semi-batch systems as well as fixed dome and floating drum designs. Biogas yield depends on the organic fraction and dry matter content of the substrate material.
Recommended
Biofuel precursor from potato waste
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Biofuel precursor from potato waste
Abstract Depleting fossil fuels and alarming rise in levels of green house gases in the atmosphere has forced for the search of alternative renewable sources of energy. With agricultural activities spreading across the globe, biomass residue generated can indeed form a useful energy source. And also the ‘wastes’ from specific kinds of agricultural industries have great potential to be converted into fuels. Biofuels especially ethanol produced from biomass has already received world wide attention and along with solving energy problems it is also proved to be environmental friendly. Since ours is an agricultural country where agricultural wastes are dumped in large volumes, ethanol derived from biomass may serve as a viable option. And stream pollution by waste effluents from food processing plants has also become one of the major importances in today’s world. The potato starch processing industry contributes considerably to this problem. The objective of this work is utilization of the waste i.e starch which is an effluent of various processes of a ,potato starch processing industry, by converting the starch into ethanol which can be used as an energy source for that particular industry itself. While sugar based raw materials like cane juice or molasses can be directly fermented, a two step process needs to be followed for the production of alcohol from starch based raw materials. The starch is liquefied using alpha-amylase and then saccharified using amyloglucosidase. The fuel ethanol is recovered by distillation after anaerobic fermentation using yeast primarily species of Saccharomyces cerevisia. The process described would reduce the amount of waste and ethanol used as energy source would cover the cost of the process. Further improvement in the process is being developed by changing the reaction environment to increase the rate constant of the reactor system.
Ethanol production
In this presentation I'm explaining about the production and processing of Ethanol from agricultural wastes and usage of ethanol as a fuel for engines. Also explained about the advantages and disadvantages of ethanol process and an detailed explanation about ethanol process.
Energy plantations for ethanol and biodiesel
This document discusses energy plantations for ethanol and biodiesel production. It begins by introducing that sugarcane, sweet sorghum, and sugar beet are used to produce ethanol through fermentation of their sugars. Starch from crops like maize and wheat can also be converted to sugar for ethanol production. The document then discusses advantages like renewability and lower emissions of ethanol fuel. It notes India's aim to increase ethanol blending in gasoline. Methods of biodiesel production through transesterification of oils are outlined. Challenges of ethanol and biodiesel like land use and affordability are also summarized.
Production of ethanol
1. Ethanol can be produced from various sources including sugary and starchy crops through fermentation. Common feedstocks include corn, sugarcane, wheat, and cellulosic biomass.
2. Ethanol is produced through fermentation of sugars by yeast. Starch from crops must first be converted to sugars before fermentation. New technologies allow production from non-edible cellulosic sources.
3. Ethanol has various uses including as a fuel additive or substitute for gasoline, as well as a solvent. While it can reduce greenhouse gas emissions compared to gasoline, ethanol also has disadvantages including lower energy content than gasoline.
Bio-ethanol ppt Rajesh Kumar Kushwaha
This document discusses bioethanol production technology and its prospects. It begins by defining bioethanol as ethanol derived from agricultural sources rather than petrochemical sources. The document then discusses the benefits of bioethanol such as reduced dependence on crude oil, being a renewable fuel, and reducing air pollution. It describes the raw materials and basic steps involved in bioethanol production. The document provides details on various pretreatment and hydrolysis methods as well as microorganisms used such as Saccharomyces cerevisiae and discusses prospects for improving cellulosic ethanol production.
Food fermentation
Fermentation in food processing is the process of converting carbohydrates to alcohol or organic acids using microorganisms—yeasts or bacteria under anaerobic conditions.
Or
Any metabolic process that releases energy from a sugar or other organic molecule, does not require oxygen or an electron transport system, and uses an organic molecule as the final electron acceptor
Fermentation usually implies that the action of microorganisms is desired.
The science of fermentation is known as zymology.
in microorganisms, fermentation is the primary means of producing ATP by the degradation of organic nutrients anaerobically
Traning material
This document provides an overview of biological conversion technologies for converting forest and wood biomass into energy and chemicals, with a focus on anaerobic digestion. It describes the basic process of anaerobic digestion, which involves three steps: hydrolysis, acidification, and methane formation carried out by different types of bacteria. Key factors that influence biogas production are also outlined, such as temperature, pH, nutrient availability, and retention time. Different types of biogas digesters are described, including batch, continuous, and semi-batch systems as well as fixed dome and floating drum designs. Biogas yield depends on the organic fraction and dry matter content of the substrate material.
Bio-Ethanol
This document discusses the development of 2nd generation bioethanol production from lignocellulosic biomass. Lignocellulosic biomass is composed of cellulose, hemicellulose, and lignin and is pretreated to break down the lignin and hemicellulose shields. Enzymatic hydrolysis then breaks down the cellulose and hemicellulose into glucose and other sugars which are fermented into ethanol. While 1st generation bioethanol comes from food sources like corn and sugarcane, 2nd generation does not utilize food sources and can use various agricultural waste biomass. Advantages of bioethanol include reduced greenhouse gas emissions compared to gasoline and the feedstocks are renewable sources.
Ethanol production
Ethanol is produced through fermentation of sugars or starch-containing materials. Yeast and bacteria like Saccharomyces cerevisiae and Zymomonas mobilis are used to ferment sugars from materials like sugarcane molasses, grains, and potatoes into ethanol. The production process involves culturing microbes, formulating nutrient medium, performing fermentation in large vessels called fermentors, and recovering ethanol through distillation. Ethanol has various applications as a solvent, fuel additive, and substitute for gasoline.
Biofuel sabika
production of biofuel via agriculture waste like rice straws, sugarcane bassage, wheat straws and ets
Microbes, Man and Environment (Microbial metabolism) .pptx
This document discusses microbial metabolism and different types of microbial metabolisms. It begins by defining metabolism as the sum of chemical reactions within a living organism, which can be divided into catabolic reactions that release energy and anabolic reactions that require energy. It then describes two main types of microbial metabolism: autotrophy which uses inorganic carbon and heterotrophy which uses organic carbon from other organisms. Specific types of autotrophs and heterotrophs are defined. The document goes on to discuss heterotrophic metabolism in more detail, outlining the main metabolic pathways of glycolysis, fermentation, and aerobic respiration. It also describes three major pathways of glycolysis in prokaryotes and provides details about the Embden-Meyer
Production of ethanol from different sources
The document discusses the production of ethanol from various sources. It begins by defining ethanol as a colorless, flammable liquid with the chemical formula C2H5OH. It then discusses the history of ethanol production dating back 9,000 years in China. The document outlines the main raw materials used like saccharine and starchy materials. It also discusses the key microorganisms involved in fermentation like yeast and bacteria. The three main generations of ethanol production are described along with differences between them and industrial production methods. Advantages like reduced greenhouse gases and disadvantages like lower energy content compared to petroleum are highlighted.
Development of bio_fuel_fermentation_cham
This document summarizes research on developing a biofuel fermentation chamber for biomass feedstock. Key points:
- The researchers developed a fermentation chamber with components like a pulley, v-belt, impeller, tank and heater to digest wood shavings as a non-food biomass feedstock.
- Testing of wood shavings samples of 0.5kg, 1.0kg and 1.5kg produced average ethanol yields of 0.121 liters per kilogram of wood.
- This equates to an estimated ethanol production rate of 121 liters per tonne of wood from the fermentation chamber, comparable to rates from cassava and other feedstocks reported in
Final2
This document discusses biotechnology and fermenters. It provides background on biotechnology, including definitions and brief history. It then describes fermenters, the specialized containers used for large-scale microbial production. Fermenters are designed to provide optimal growth conditions and include features like baffles, impellers, spargers, and probes. The document outlines common types of fermenters and their modes of operation. It also summarizes some key scientific processes involved in fermentation like glycolysis and lactic acid fermentation.
bioethanol ppt
Bioethanol is an alcohol made by fermenting carbohydrates from plants like corn or sugarcane. It can be used as a gasoline substitute. Bioethanol has lower energy content than gasoline but has higher octane numbers. It is produced through processes like sugar or starch fermentation. While bioethanol reduces greenhouse gases, there are concerns about food prices and land use. Future development focuses on using non-food feedstocks like cellulosic biomass.
Ethanol production
The presentation covers basics of ethanol production, raw materials and micro organisms employed and the process and recovery of ethanol.
Alternative petrol from areca husk
This document summarizes research on producing bioethanol from areca nut husks as an alternative fuel. It discusses:
- Collection and processing of areca nut husks to extract sugars through acid/alkaline hydrolysis pretreatments.
- Fermenting the extracted sugars into bioethanol using yeast.
- Distilling the fermented mash to produce bioethanol.
- Testing the fuel properties and engine performance of blends of areca bioethanol and petrol, finding improved efficiency over petrol alone.
The research concludes that areca nut husk bioethanol is a promising alternative fuel that can be used in spark ignition engines without modification. Blends of 10-
Industrial production of alcohol
The document discusses the industrial production process of ethyl alcohol. There are four main steps: [1] inoculum production using yeast strains, [2] preparation of the fermentation medium using molasses and other nutrients, [3] batch fermentation in large tanks under controlled temperature and pH conditions, [4] harvest and recovery of ethanol through distillation. The ethanol produced is then purified through fractional distillation and used widely as a solvent, fuel additive, and in various industrial products. Proper cultivation of yeast strains and maintenance of fermentation conditions are important to optimize ethanol yield from the process.
BIOGAS AND BIOETHANOL FROM CASSAVA (TUBERS)
BIOFUEL PRODUCED FROM TUBERS,BIOGAS PRODUCTION ,BIOETHANOL PRODUCTION,FUEL FROM CASSAVA , TUBERS WASTE MANAGEMNT,FOOD WASTE MANAGEMENT , CASSAVA
Bioethanol Production
This document discusses bioethanol production and technology. It begins by introducing bioethanol and explaining its importance as an alternative energy source due to depletion of fossil fuels and environmental concerns. The main steps of bioethanol production are described as fermentation, distillation and dehydration. Common raw materials like sugar, starch and cellulose sources are identified. Microorganisms used in fermentation and different production technologies like sugar fermentation and dry/wet milling processes are outlined. Applications include fuel blending and uses. Advantages include renewability while disadvantages include lower efficiency than petroleum and land use impacts.
Ethyl alcohol production
Ethyl alcohol can be produced through two main processes: fermentation of carbohydrates or hydration of ethylene. Fermentation involves yeast cells like Saccharomyces cerevisiae transforming carbohydrates into ethanol and carbon dioxide. The fermentation of sugars like glucose occurs through an anaerobic biological process. Various raw materials like molasses, starch, and cellulosic waste can be used as substrates for ethanol fermentation by microorganisms like yeast under optimal temperature and pH conditions. The fermented broth is then distilled to recover 95% ethanol and byproducts are used in industries like perfume manufacturing.
Cellulosic ethanol
Cellulosic ethanol is made from the cellulose in plant materials like stalks, stems, and leaves. It is more difficult to produce than corn or sugarcane ethanol because cellulose molecules are tightly packed. The production process involves a pretreatment step to break down the cellulose, followed by fermentation where yeast converts the sugars to ethanol. Recent technological advances like specialized enzyme formulations and yeast strains have helped reduce costs and improve yields, making cellulosic ethanol more viable. The first commercial cellulosic ethanol plant in the US opened in 2014 in Iowa.
Bioethanol production by waste cooking oil .pptx
The document discusses different types of biofuels including bioethanol, biodiesel, biobutanol, and biogas. It provides information on the raw materials, production processes, advantages, and challenges for each type of biofuel. For bioethanol, the document outlines that it can be produced from sugar, starch, or cellulosic crops through fermentation processes. For biogas, it states that the fuel is produced through anaerobic digestion of organic waste and can be used as a renewable energy source.
Microbial Alpha-amylase production (Basics).pdf
Microbial α-amylase production is important industrially and can be done through solid state or submerged fermentation. α-Amylase is an enzyme that hydrolyzes starch into simpler sugars and is commonly produced through microbial fermentation using Bacillus species. The production process requires optimization of temperature, pH, moisture levels and duration to achieve high enzyme yields. Downstream processing such as precipitation and chromatography is used to recover and purify the α-amylase enzyme.
Production of bioethanol from wheat straw
Wheat straw represents a promising source of lignocellulosic biomass for second generation bioethanol production. Global wheat production results in over 850 teragrams of wheat straw annually, which could potentially produce 120 gigaliters of ethanol to replace 93 gigaliters of gasoline. However, pretreatment, enzymatic hydrolysis, fermentation and distillation are required to convert the cellulose, hemicellulose and lignin in wheat straw into ethanol. Ongoing research aims to reduce the costs of pretreatment and enzymes in order to make lignocellulosic ethanol competitive with gasoline.
Corn and Lignocellulosic Ethanol Production Processes
This document discusses ethanol production from corn and cellulosic sources. It begins by explaining corn ethanol production via dry milling and wet milling processes. Dry milling involves grinding the whole corn kernel and liquefying the starch before fermentation. Wet milling separates the kernel into fiber, germ, and starch components. The document then discusses cellulosic ethanol production, which involves breaking down the lignocellulose structure of plant biomass into fermentable sugars.
Describe the transformation that has taken place with the function.pdf
Describe the transformation that has taken place with the function:
with regard to its toolkit function. Name each component of the transformation, as well as the
toolkit function.
Solution
f(x) = - 2 sqrt ( x- 1) + 12
parent function is sqrt x
so , there are 4 transformations in parent function
first transformation horizontal shifting of 1 unit right
2nd transformation is 12 units shifted vertically upwards
3rd transformation reflection across x axis
4th transformation vertically stretched by a factor of 2.
Each student at State University has a student I.D. number consisting.pdf
Each student at State University has a student I.D. number consisting of four digits (the first
digit is nonzero, and digits may be repeated) followed by three of the letters A, B, C, D, and E
(letters may not be repeated). How many different student numbers are possible?
Solution
Given, I.D. number consists of four digits followed by three letters.
In general, it would be of the form, ______________
Let us name the digits as D1, D2, D3 and D4 respectively.
And the letters as L1, L2 and L3 respectively.
So we have the form, D1D2D3D4L1L2L3
D1 can be any one of 1, 2, 3, 4, 5, 6, 7, 8, 9 (since its given, first digit as non zero)
So, there are 9 ways to select the first digit.
D2, D3 and D4 can be any one of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 (Since its given, digits may be
repeated)
So, there are 10 ways each to select the next three digits.
L1 can be any one of A, B, C, D, E.
So, there are 5 ways to select the first letter.
And hence, there would be 4 ways to select the second letter L2 (Since its given, letters may not
be repeated)
Similarly, there would be 3 ways to select the third letter L3 (Since its given, letters may not be
repeated)
So, the possible number of ways for, D1D2D3D4L1L2L3 would be
9 x 10 x 10 x 10 x 5 x 4 x 3 = 540000
Hence, 540000 different student numbers are possible..
More Related Content
Similar to Increasing concerns about dependence on fossil fuels has generated r.pdf
Bio-Ethanol
This document discusses the development of 2nd generation bioethanol production from lignocellulosic biomass. Lignocellulosic biomass is composed of cellulose, hemicellulose, and lignin and is pretreated to break down the lignin and hemicellulose shields. Enzymatic hydrolysis then breaks down the cellulose and hemicellulose into glucose and other sugars which are fermented into ethanol. While 1st generation bioethanol comes from food sources like corn and sugarcane, 2nd generation does not utilize food sources and can use various agricultural waste biomass. Advantages of bioethanol include reduced greenhouse gas emissions compared to gasoline and the feedstocks are renewable sources.
Ethanol production
Ethanol is produced through fermentation of sugars or starch-containing materials. Yeast and bacteria like Saccharomyces cerevisiae and Zymomonas mobilis are used to ferment sugars from materials like sugarcane molasses, grains, and potatoes into ethanol. The production process involves culturing microbes, formulating nutrient medium, performing fermentation in large vessels called fermentors, and recovering ethanol through distillation. Ethanol has various applications as a solvent, fuel additive, and substitute for gasoline.
Biofuel sabika
production of biofuel via agriculture waste like rice straws, sugarcane bassage, wheat straws and ets
Microbes, Man and Environment (Microbial metabolism) .pptx
This document discusses microbial metabolism and different types of microbial metabolisms. It begins by defining metabolism as the sum of chemical reactions within a living organism, which can be divided into catabolic reactions that release energy and anabolic reactions that require energy. It then describes two main types of microbial metabolism: autotrophy which uses inorganic carbon and heterotrophy which uses organic carbon from other organisms. Specific types of autotrophs and heterotrophs are defined. The document goes on to discuss heterotrophic metabolism in more detail, outlining the main metabolic pathways of glycolysis, fermentation, and aerobic respiration. It also describes three major pathways of glycolysis in prokaryotes and provides details about the Embden-Meyer
Production of ethanol from different sources
The document discusses the production of ethanol from various sources. It begins by defining ethanol as a colorless, flammable liquid with the chemical formula C2H5OH. It then discusses the history of ethanol production dating back 9,000 years in China. The document outlines the main raw materials used like saccharine and starchy materials. It also discusses the key microorganisms involved in fermentation like yeast and bacteria. The three main generations of ethanol production are described along with differences between them and industrial production methods. Advantages like reduced greenhouse gases and disadvantages like lower energy content compared to petroleum are highlighted.
Development of bio_fuel_fermentation_cham
This document summarizes research on developing a biofuel fermentation chamber for biomass feedstock. Key points:
- The researchers developed a fermentation chamber with components like a pulley, v-belt, impeller, tank and heater to digest wood shavings as a non-food biomass feedstock.
- Testing of wood shavings samples of 0.5kg, 1.0kg and 1.5kg produced average ethanol yields of 0.121 liters per kilogram of wood.
- This equates to an estimated ethanol production rate of 121 liters per tonne of wood from the fermentation chamber, comparable to rates from cassava and other feedstocks reported in
Final2
This document discusses biotechnology and fermenters. It provides background on biotechnology, including definitions and brief history. It then describes fermenters, the specialized containers used for large-scale microbial production. Fermenters are designed to provide optimal growth conditions and include features like baffles, impellers, spargers, and probes. The document outlines common types of fermenters and their modes of operation. It also summarizes some key scientific processes involved in fermentation like glycolysis and lactic acid fermentation.
bioethanol ppt
Bioethanol is an alcohol made by fermenting carbohydrates from plants like corn or sugarcane. It can be used as a gasoline substitute. Bioethanol has lower energy content than gasoline but has higher octane numbers. It is produced through processes like sugar or starch fermentation. While bioethanol reduces greenhouse gases, there are concerns about food prices and land use. Future development focuses on using non-food feedstocks like cellulosic biomass.
Ethanol production
The presentation covers basics of ethanol production, raw materials and micro organisms employed and the process and recovery of ethanol.
Alternative petrol from areca husk
This document summarizes research on producing bioethanol from areca nut husks as an alternative fuel. It discusses:
- Collection and processing of areca nut husks to extract sugars through acid/alkaline hydrolysis pretreatments.
- Fermenting the extracted sugars into bioethanol using yeast.
- Distilling the fermented mash to produce bioethanol.
- Testing the fuel properties and engine performance of blends of areca bioethanol and petrol, finding improved efficiency over petrol alone.
The research concludes that areca nut husk bioethanol is a promising alternative fuel that can be used in spark ignition engines without modification. Blends of 10-
Industrial production of alcohol
The document discusses the industrial production process of ethyl alcohol. There are four main steps: [1] inoculum production using yeast strains, [2] preparation of the fermentation medium using molasses and other nutrients, [3] batch fermentation in large tanks under controlled temperature and pH conditions, [4] harvest and recovery of ethanol through distillation. The ethanol produced is then purified through fractional distillation and used widely as a solvent, fuel additive, and in various industrial products. Proper cultivation of yeast strains and maintenance of fermentation conditions are important to optimize ethanol yield from the process.
BIOGAS AND BIOETHANOL FROM CASSAVA (TUBERS)
BIOFUEL PRODUCED FROM TUBERS,BIOGAS PRODUCTION ,BIOETHANOL PRODUCTION,FUEL FROM CASSAVA , TUBERS WASTE MANAGEMNT,FOOD WASTE MANAGEMENT , CASSAVA
Bioethanol Production
This document discusses bioethanol production and technology. It begins by introducing bioethanol and explaining its importance as an alternative energy source due to depletion of fossil fuels and environmental concerns. The main steps of bioethanol production are described as fermentation, distillation and dehydration. Common raw materials like sugar, starch and cellulose sources are identified. Microorganisms used in fermentation and different production technologies like sugar fermentation and dry/wet milling processes are outlined. Applications include fuel blending and uses. Advantages include renewability while disadvantages include lower efficiency than petroleum and land use impacts.
Ethyl alcohol production
Ethyl alcohol can be produced through two main processes: fermentation of carbohydrates or hydration of ethylene. Fermentation involves yeast cells like Saccharomyces cerevisiae transforming carbohydrates into ethanol and carbon dioxide. The fermentation of sugars like glucose occurs through an anaerobic biological process. Various raw materials like molasses, starch, and cellulosic waste can be used as substrates for ethanol fermentation by microorganisms like yeast under optimal temperature and pH conditions. The fermented broth is then distilled to recover 95% ethanol and byproducts are used in industries like perfume manufacturing.
Cellulosic ethanol
Cellulosic ethanol is made from the cellulose in plant materials like stalks, stems, and leaves. It is more difficult to produce than corn or sugarcane ethanol because cellulose molecules are tightly packed. The production process involves a pretreatment step to break down the cellulose, followed by fermentation where yeast converts the sugars to ethanol. Recent technological advances like specialized enzyme formulations and yeast strains have helped reduce costs and improve yields, making cellulosic ethanol more viable. The first commercial cellulosic ethanol plant in the US opened in 2014 in Iowa.
Bioethanol production by waste cooking oil .pptx
The document discusses different types of biofuels including bioethanol, biodiesel, biobutanol, and biogas. It provides information on the raw materials, production processes, advantages, and challenges for each type of biofuel. For bioethanol, the document outlines that it can be produced from sugar, starch, or cellulosic crops through fermentation processes. For biogas, it states that the fuel is produced through anaerobic digestion of organic waste and can be used as a renewable energy source.
Microbial Alpha-amylase production (Basics).pdf
Microbial α-amylase production is important industrially and can be done through solid state or submerged fermentation. α-Amylase is an enzyme that hydrolyzes starch into simpler sugars and is commonly produced through microbial fermentation using Bacillus species. The production process requires optimization of temperature, pH, moisture levels and duration to achieve high enzyme yields. Downstream processing such as precipitation and chromatography is used to recover and purify the α-amylase enzyme.
Production of bioethanol from wheat straw
Wheat straw represents a promising source of lignocellulosic biomass for second generation bioethanol production. Global wheat production results in over 850 teragrams of wheat straw annually, which could potentially produce 120 gigaliters of ethanol to replace 93 gigaliters of gasoline. However, pretreatment, enzymatic hydrolysis, fermentation and distillation are required to convert the cellulose, hemicellulose and lignin in wheat straw into ethanol. Ongoing research aims to reduce the costs of pretreatment and enzymes in order to make lignocellulosic ethanol competitive with gasoline.
Corn and Lignocellulosic Ethanol Production Processes
This document discusses ethanol production from corn and cellulosic sources. It begins by explaining corn ethanol production via dry milling and wet milling processes. Dry milling involves grinding the whole corn kernel and liquefying the starch before fermentation. Wet milling separates the kernel into fiber, germ, and starch components. The document then discusses cellulosic ethanol production, which involves breaking down the lignocellulose structure of plant biomass into fermentable sugars.
Similar to Increasing concerns about dependence on fossil fuels has generated r.pdf (20)
Microbes, Man and Environment (Microbial metabolism) .pptx
Microbes, Man and Environment (Microbial metabolism) .pptx
Corn and Lignocellulosic Ethanol Production Processes
Corn and Lignocellulosic Ethanol Production Processes
More from alokkesh1
Describe the transformation that has taken place with the function.pdf
Describe the transformation that has taken place with the function:
with regard to its toolkit function. Name each component of the transformation, as well as the
toolkit function.
Solution
f(x) = - 2 sqrt ( x- 1) + 12
parent function is sqrt x
so , there are 4 transformations in parent function
first transformation horizontal shifting of 1 unit right
2nd transformation is 12 units shifted vertically upwards
3rd transformation reflection across x axis
4th transformation vertically stretched by a factor of 2.
Each student at State University has a student I.D. number consisting.pdf
Each student at State University has a student I.D. number consisting of four digits (the first
digit is nonzero, and digits may be repeated) followed by three of the letters A, B, C, D, and E
(letters may not be repeated). How many different student numbers are possible?
Solution
Given, I.D. number consists of four digits followed by three letters.
In general, it would be of the form, ______________
Let us name the digits as D1, D2, D3 and D4 respectively.
And the letters as L1, L2 and L3 respectively.
So we have the form, D1D2D3D4L1L2L3
D1 can be any one of 1, 2, 3, 4, 5, 6, 7, 8, 9 (since its given, first digit as non zero)
So, there are 9 ways to select the first digit.
D2, D3 and D4 can be any one of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 (Since its given, digits may be
repeated)
So, there are 10 ways each to select the next three digits.
L1 can be any one of A, B, C, D, E.
So, there are 5 ways to select the first letter.
And hence, there would be 4 ways to select the second letter L2 (Since its given, letters may not
be repeated)
Similarly, there would be 3 ways to select the third letter L3 (Since its given, letters may not be
repeated)
So, the possible number of ways for, D1D2D3D4L1L2L3 would be
9 x 10 x 10 x 10 x 5 x 4 x 3 = 540000
Hence, 540000 different student numbers are possible..
Describe personality traits and their implications in leadership..pdf
Describe personality traits and their implications in leadership.
Solution
Personality traits are the characteristics associated with individuals who make them unique while
their assessment by someone else. For example: Employees may have a belief that their reporting
manger is honest as well as a person with caring nature. Then, we can say that being caring and
to be honest for their subordinates are two distinct personality traits.
Some traits can be pointed as,
Traits play an important role for understanding the leadership styles. For example, a leader
having emotional attire will always care and nurture their supporters. A leader is a person who
can influence others with his strong traits in every walk of life. Honesty, decision making, bold,
truth etc. also constitutes some great leaders in the past likes Abraham Lincoln, Mahatma
Gandhi, G. Washington, Rockefeller, Steve Jobs etc.
According the Trait theory of leadership, leaders can be distinguished from non-leaders on the
basis of Social, psychological, personal and intellectual factors. These traits might contribute for
the success and failure of the organization. For example: A leader having self-confidence and
knowledge might execute more tasks than a leader having low self confidence..
Analyze Which of the following isare found in ALL species of fungi.pdf
Analyze: Which of the following is/are found in ALL species of fungi?
Mycotoxins
Temperature dimorphism
Mycelium
Organelles
Asexual spores
Mycotoxins
Temperature dimorphism
Mycelium
Organelles
Asexual spores
Solution
Answer-Mycelium and Organelles
Description-Mycotoxins,Temperature dimorphism,Asexual spores these characteristics
represented by few species but Mycelium and Organelles are special characteristics of all fungi.
Mycelium is the vegetative part of a fungus or fungus-like bacterial colony, consisting of a mass
of branching, thread-like hyphae.Mycelium helps fungus to absorbs nutrients from its
environment.
Organelles-According to Scientific classification Fungi is belongs to Eukaryota,Kingdom-fungi.
Common charecteristics Fungal hyphae cells.
An industry analysis by Porters Five Forces reveals that the soft dr.pdf
An industry analysis by Porters Five Forces reveals that the soft drink industry has historically
been favorable for positive profitability, as exemplified by Pepsi and Cokes financial outcomes.
Soft drink industry is very profitable, more so for the concentrate producers than the bottler\'s.
This is surprising considering the fact that product sold is a commodity which can even be
produced easily. There are several reasons for this, using the five forces analysis we can clearly
demonstrate how each force contributes the profitability of the industry.
Threat of new entrants
Entering bottling, meanwhile, would require substantial capital investment, which would deter
entry.
although the CP industry is not very capital intensive, other barriers would prevent entry.
Through their DSD practices, these companies had intimate relationships with their retail
channels and would be able to defend their positions effectively through discounting or other
tactics.
It would be nearly impossible for either a new CP or a new bottler to enter the industry. New CPs
would need to overcome the tremendous marketing muscle and market presence of Coke, Pepsi,
and a few others, who had established brand names that were as much as a century old.
Companies that have a door to door distribution channel in place like snack companies could
choose to diversify into soda industry
Switching costs are low for consumers who risk very little by trying new brands or
Beverages
Barriers to entry are relatively high, though, with large advertising budgets and competitive
brand loyalty to big players like Coca-Cola and Pepsi
The drinks with high growth and high hype are non-carbonated beverages such as juice drinks,
sports drinks, tea-based drinks, dairy-based drinks, and especially bottled water
Bargaining power of buyers
through five principal channels: food stores, convenience and gas, fountain, vending, and mass
merchandisers (primary part of \"Other\" in \"Cola Wars…\" case)
Bottlers own a manufacturing and sales operation in an exclusive geographic territory, with
rights granted in perpetuity by the franchiser, subject to termination only in the event of default
by the bottler
1980 Soft Drink Interbrand Competition Act preserved the right of CPs to grant exclusive
territories to their bottlers, giving less bargaining power to Bottler\'s buyers because there is no
alternative supplier
Bottlers are locked into contracts that grant CPs the right to set prices and other terms of sale
Bottlers are allowed to handle the non-cola brands of other Cps at their discretion
Bottlers are also given freedom in choosing whether or not to carry new beverages introduced by
the CPs but cannot carry directly competitive brands
Competition for brand shelf space in retail channels gives some bargaining power back to buyers
Threat of substitute products
Through the early 1960s, soft drinks were synonymous with \"colas\" in the mind of consumers.
In the 1980s and 1990s Coffee, tea, water, juices.
ABSTRACT In 2011, Japan was shocked by the revelation of a fraud at.pdf
ABSTRACT: In 2011, Japan was shocked by the revelation of a fraud at one of its most
prominent companies, Olympus. What was more shocking was that the fraud was perpetrated by
its Chairman of the Board and past president, Tsuyoshi Kikukawa, in collusion with several other
Board members and officers. The whistleblower was Michael Woodford, a British citizen and
the Company’s first non-Japanese president and CEO. Woodford had held the post of president
for just six months before he was precipitously fired at a Board of Director’s meeting on October
14, 2011. The case has been successfully used in both undergraduate and graduate courses that
include intermediate financial accounting, advanced accounting, auditing, and forensic
accounting. It demonstrates how poor governance structures allowed company executives and
directors to circumvent accounting rules and hide investment losses for over two decades. The
accounting topics include (1) methods of accounting for investments in financial instruments, (2)
recognition and measurement of goodwill at the time of acquisition, and (3) consolidation
accounting. The case requires students to link economic events to business decisions, and
understand the financial reporting ramifications of those decisions. The case also requires
students to critically analyze corporate governance mechanisms, and to consider the external
auditor’s responsibility for detecting and communicating financial statement fraud. Keywords:
Olympus; goodwill; fair-value accounting; corporate governance; financial reporting fraud;
auditing. INTRODUCTION Michael Woodford had made the trip from Olympus’s Tokyo
headquarters to Haneda Airport countless times before. He enjoyed the comfortable confines of
the company’s Lexus sedan, and the ride usually gave him time to chat with his driver and
friend, Nick. Today, however, neither Nick nor the Lexus were anywhere in sight, and he found
himself in the back seat of a Tokyo cab. Only moments before, he concluded a meeting at a
popular cafe with a Saurav K. Dutta is an Associate Professor and Dennis H. Caplan is an
Assistant Professor, both at the University at Albany, SUNY; and David J. Marcinko is an
Associate Professor at Skidmore College. We thank the editor, associate editor, and two
anonymous reviewers for their helpful insights, comments, and suggestions. We acknowledge
our students and, in particular, Jim Halley, who completed the case and provided us with
valuable feedback. We are also grateful to Jennifer Pickett for teaching this case and allowing us
to administer the postcase questionnaire to her class. Published Online: April 2014 459 reporter
for the Financial Times, to whom he had explained the circumstances surrounding his abrupt
dismissal from his position as president and CEO of Olympus. Woodford himself could scarcely
believe the series of events that had unfolded since his appointment as Olympus’s president in
April 2011. Now, only six months later, the Board had suddenly .
Why are general capital assets reported on the statement of net asse.pdf
Why are general capital assets reported on the statement of net assets on the government-wide
statements but not on the governmental funds balance sheet?Why are general capital assets
reported on the statement of net assets on the government-wide statements but not on the
governmental funds balance sheet?
Solution
General Capital assets are obtained by using financial sources of government funds not by using
of proprietary and trust fund that\'s why it is shown in financial statement in government
activities column of government wide statement of net asset..
Which of the following sets of biomes is placed in order from lowest.pdf
Which of the following sets of biomes is placed in order from lowest to highest average annual
temperature?Tundra, woodland/shrubland, subtropical desertSubtropical desert, temperate
seasonal forest, tropical rain forestTropical seasonal forest, boreal forest,
woodland/shrublandTropical rain forest, temperate seasonal forest, tundra4.Which of the
following sets of biomes is placed in order from most to least biologically diverse?Boreal forest,
woodland/shrubland, tropical seasonal forestTropical rain forest, temperate seasonal forest,
tundraSubtropical desert, temperate seasonal forest, tropical rain forestTundra,
woodland/shrubland, subtropical desertWhich of the following sets of biomes is placed in order
from lowest to highest average annual temperature?Tundra, woodland/shrubland, subtropical
desertSubtropical desert, temperate seasonal forest, tropical rain forestTropical seasonal forest,
boreal forest, woodland/shrublandTropical rain forest, temperate seasonal forest, tundra
Solution
Land Biomes
These are the 8 different land biomes in order from coldest to warmest
Tundra
Tundra is the coldest of all the biomes. Tundra comes from the Finnish word tunturi, meaning
treeless plain. It is noted for its frost-molded landscapes, extremely low temperatures, little
precipitation, poor nutrients, and short growing seasons. Dead organic material functions as a
nutrient pool. The two major nutrients are nitrogen and phosphorus. Nitrogen is created by
biological fixation, and phosphorus is created by precipitation. It is also the driest biome next to
the desert.
Characteristics of tundra include:
Extremely cold climate
Low biotic diversity
Simple vegetation structure
Limitation of drainage
Short season of growth and reproduction
Energy and nutrients in the form of dead organic material
Large population oscillations
Coniferous Forest (also known as Taiga)
The Coniferous Forest is a forest of Conifers (too much to handle, isn\'t it?). A Conifer is a tree
that produces its seeds in cones. The Pine tree is the most common example. Conifer leaves
conserve water with the thick, waxy layer that covers their leaves, also known as needles. The
vegitation in the Coniferous forest is small in size, but large enough to feed the vast herbivore
population. Most of these animals survive the brutal winters by migrating or hibernating.
Average Annual Rainfall- 14-29.5 in.
Average Temperatures in the Summer- 57.2°F
Average Temperatures in the Winter- 14°F
Deciduous Forest (also known as temperate forest)
Deciduous forests can be found in the eastern half of North America, and the middle of Europe.
There are many deciduous forests in Asia. Some of the major areas that they are in are southwest
Russia, Japan, and eastern China. South America has two big areas of deciduous forests in
southern Chile and Middle East coast of Paraguay. There are deciduous forests located in New
Zealand, and southeastern Australia also.
The average annual temperature in a deciduous forest i.
When a planetary nebula forms around a star you see gas emitting ligh.pdf
When a planetary nebula forms around a star you see gas emitting light and a white dwarf
present at the center. Below is a detailed image of M 57, the Ring Nebula. In this image it looks
very much like a flower, with different layers of gas clearly seen. What does this image tell us
about the conditions inside the star that created the nebula? The layers are the various shells of
gas from inside the star. Before the star exploded, there were shells burning around the core.
When it exploded, it reveals these layers in the expansion of the gas. Each layer of gas was
previously a shell inside the star. Measurements of the Doppler velocity for the gas shows that it
is expanding outward from the white dwarf. This means that the outer most gas layer must have
been accelerated more rapidly than the inner layers, when the star exploded. The outer most layer
is made of hydrogen, which is the lightest element and would be accelerated the most. As you
move inward the layers are made of helium, carbon, oxygen, etc. Moving inward, each layer is
composed of a heavier element which isn\'t accelerated as much due to its larger mass. So the
nebula formed from a single explosion. Measurements of the Doppler velocity for the inner most
layer of gas shows that it is expanding outward. This is the outer layer of the star which is
moving outward when the star exploded. The other layers farther out are gas from the molecular
cloud that is colliding with the expanding gas of the planetary nebula. The molecular cloud gas is
surrounding the planetary nebula, because a low mass star doesn\'t live long enough to move
very far from where it is formed. The planetary nebula is compressing the molecular cloud,
setting off star formation. Measurements of the Doppler velocity for the gas snows that it is
expanding outward from the white dwarf. This means that the outer most gas was ejected from
the star first since it is the farthest from the white dwarf. Layers that are in closer must have been
ejected at a later time. This suggests that the planetary nebula formed from multiple eruptions
inside the star and not one single explosion.
Solution
a) First of all, one should know how a planetary nebula is formed. When an aging star is unable
to sustain further fusion reaction to keep its core stable it has many ways to give away - either
turn into a supernova, become a black hole or neutron star, or shed its outer envelopes and then
the core turns into a white dwarf. this later stage is known as planetary nebulae.
The M 57, commonly goes by the name of Ring Nebula, has a bipolar morphology where the
core primarily contains carbon and oxygen and other lighter elements. The strong concentration
of matter around the equator makes it look like a prolate spheroid.
Option d..
Which of the following is consistent with a history of positibe sele.pdf
Which of the following is consistent with a history of positibe selection but not genetic drift
a. common haplotype exhibiting weak linkage disequilibrium
b a rare haplotype showing strong linkage disequilibrium
c. a common haplotype in a region of high recombination
d. a rare haplotype in a region of low recombination
e. higher frequency and higher linkage disequilibrum that other alleles at the same locus
Solution
c. a common haplotype in a region of high recombination is consistent with positive selection
Genetic drift is usually one of the reasons of linkage disequilibrium, so linkage disequilibrium
could be thought to be asociated with Genetic drift. If a common haplotype is ina region on of
high recombination, there are greater chances of being it to transmitted to the next generations
and thus positively selected..
What is the difference between protein-based and polysaccharide-based.pdf
What is the difference between protein-based and polysaccharide-based materials?
Solution
Protein based materials are materials where the monomer constructing units include the amine
products like lysine, tyrosine etc. Polysaccharide based materials are the one the ones which are
made of carbohydrates like glucose, glycogen etc..
What is Flexibility of Command Usage.SolutionOne of the advant.pdf
What is Flexibility of Command Usage.
Solution
One of the advantages of CLI commands is that different commands can be combined using
pipes to perform tasks that would be much more cumbersome, to perform with GUI programs.
Another flexibilty of using CLI is that you can excatly get or do what you want because GUI are
limited in functionality..
What data type is the value 25.25Solution25.25 is floating po.pdf
What data type is the value 25.25?
Solution
25.25 is floating point data type.
This data type is used to represent the factional part of the number.We can store numeric value
which are fraction which is not possible in integer data type.
2 subtypes of floating data type are : 1) Float--- 4 bytes 2) Double---8 Bytes.
What are the reasons for joining management development programs Wh.pdf
What are the reasons for joining management development programs? What are the benefits of
these programs?
Solution
Management development programs (MDP): Management development programs are the
training module which helps to enhance the organization performance through training programs.
There are so many reasons for joining the management development programs are listed below:
Benefits of the MDP:.
Using C++I keep getting messagehead does not name a type.pdf
Using C++
I keep getting message:
\'head does not name a type\'
\'teal does not name a type\'
Where do I place this code in my program:
/*search and delete with respect to location as current, head and tail
//define below 2 lines in LinkedList() function
head = new NodeType;
tail = new NodeType;
void UnsorderedType::DeleteItem(ItemType item)
{
NodeType *tempLocation, *location;
bool stop = false;
if(!isEmpty())
{
location = head;
tempLocation = head->link;
while (templocation != tail && !stop)
{
if (templocation->info == item)
stop = true;
else
{
location = templocation;
templocation = templocation->link;
}
}
if (!stop)
cout << \"The node to delete is not in the list!\" << endl;
else
{
location->link = templocation->link;
delete templocation;
count--;
}
}
else
{
cout << \"The list is empty!\" << endl;
}
}*/
/Problem and code:
Implement the UnsortedList class to store a list of strings that are input into the list from
data2.txt.
- create a main.cpp file that gets the numbers from the file
- insert the word \"cat\" into the list
- insert another word \"antibacterial\" into the list
- delete the word \"letter\" from the list
- print out the following:
--the entire list
- the greatest
- the least
2. Attach the main.cpp, UnsortedList.cpp, the ItemType.h, and the output file one called
outfile1.txt
- Yes you need to make your program output an \"outfile1.txt\"
3. Implement the UnsortedList class to store a list of numbers that are input into the list from
data.txt.
- create a main.cpp file that gets the numbers from the file
- insert the number 7 into the list
- insert another number 300 into the list
- delete the number 6 from the list
- print out the following:
--the entire list
- the greatest
- the least
2. Attach the main.cpp, UnsortedList.cpp, the ItemType.h, and the output file two called
outfile2.txt
- Yes you need to make your program output an \"outfile2.txt\"
data.txt
super formula travel free thick Josephine Clara education
data2.txt
super formula travel free thick Josephine Clara education
//My main.cpp
//--------------------------------------------------------------
// Test driver for Linked List UnsortedType list
// Navarr Barnier
// Your class CS3350 TTh 1:00
// Due date: Thursday, September 13, 2012
//
// Compile command: g++ hw2.cpp ch03-UnsortedType.cpp ch03-ItemType.cpp
// Input file name: hw2.txt
// Contains list of commands to add items to list, split original
// list into two lists, print each list and get the length of
// each list.
// Output: The result of each command is displayed on the screen.
// Filename: hw2.cpp
//--------------------------------------------------------------
#include
#include
#include
#include
#include
#include \"ItemType.h\"
using namespace std;
void PrintList(UnsortedType&);
void SplitList(UnsortedType&, ItemType);
ItemType GetItem(ItemType& item, bool& found);
int main()
{
ifstream inFile; // file containing operations
ofstream outFS; // Output file stream
string data; // operation to be executed
s.
true or false A primary sources tend to be firsthand observations of.pdf
true or false A primary sources tend to be firsthand observations of an event. B an example of a
primary source would be a book review.
Solution
A> primary sources tend to be firsthand observations of an event. TRUE
Explanation:
A primary source provides direct or firsthand evidence about an event, object, person, or work of
art.
B> an example of a primary source would be a book review. FALSE
Explanation:
Book review is the secondary sources which describe, analyze, summarize, evaluate, discuss,
interpret, comment upon and process primary sources..
To what extent can MarxistStructuralist perspectives provide valuab.pdf
To what extent can Marxist/Structuralist perspectives provide valuable insights in explaining
contemporary IPE?
Solution
Marxism persepective within the IPE provide a large extent limited to the study of the ideology
of Soviet state.this was untill the collapse of the Soviet Union where it was referred to as the
Marxism leninism ideology.marx gives economic law ,these law support his theory of an
unsupportable economic and political system under the regime of the capitalist system.in
contemporary IPE Marx philosophy is very less explainable because these time most countries
follow democracy and Marx believe in communalism ..
This Question 1 pt Resources are 0 A, the inputs used to make good a.pdf
This Question: 1 pt Resources are 0 A, the inputs used to make good and services. OB. scarce.
C. All of these are correct. O D. land, labor, capital, and entrepreneurship.
Solution
The correct answer should be C. All of these are correct as resources are indeed factors of
production. The correct answer is thus C..
There are n couples invited to a banquet. Suppose there are some numb.pdf
There are n couples invited to a banquet. Suppose there are some number of speeches given
during the banquet, so that at most one member of each couple gives a talk. How many different
sets of speakers could the evening have?
Solution
n couple would mean we have n men and n women. Lets assume that this fact holds( universal
fact)
Now, at most 1 member of each couple gives a talk. This would mean that we will have at most 1
from each couple giving a sppech during banquet.
We can have no people talking , 1 person talking from the whole n couple group, 2
people,................ or each of n couples pair giving a speech =
Hence, the difference sets one can have : nC0 +nC1 +nC2 + ....... n Cn = 2^n
Please note that if we neccesarily got to have speech then the first term( nC0 = 1) will yeild to 0
and therefore come to the RHS. Hence, nC1 +nC2 + ....... n Cn = 2^n -1
Therefore, 2^n ways when atmost 1 from each couple pair, or 2^n -1 when we need atleast 1
speech from the group, will leave it to you to decide on this one..
The Northwest Ordinance inclmsted all of the following EXCEPT a. Nom.pdf
The Northwest Ordinance inclmsted all of the following EXCEPT: a. Nominal prohibition of
slavery. b. Guarantee of freedom of religion for settlers. c. The process by which western
territories could become states. d. Land reserved for Indians. Hide Feedback
Solution
Option d.
The Northwest Ordinance provided a method for admitting new states to the Union and spelled
out a plan which would result in the taking of lands from hundreds of Indian tribes..
More from alokkesh1 (20)
Describe the transformation that has taken place with the function.pdf
Describe the transformation that has taken place with the function.pdf
Each student at State University has a student I.D. number consisting.pdf
Each student at State University has a student I.D. number consisting.pdf
Describe personality traits and their implications in leadership..pdf
Describe personality traits and their implications in leadership..pdf
Analyze Which of the following isare found in ALL species of fungi.pdf
Analyze Which of the following isare found in ALL species of fungi.pdf
An industry analysis by Porters Five Forces reveals that the soft dr.pdf
An industry analysis by Porters Five Forces reveals that the soft dr.pdf
ABSTRACT In 2011, Japan was shocked by the revelation of a fraud at.pdf
ABSTRACT In 2011, Japan was shocked by the revelation of a fraud at.pdf
Why are general capital assets reported on the statement of net asse.pdf
Why are general capital assets reported on the statement of net asse.pdf
Which of the following sets of biomes is placed in order from lowest.pdf
Which of the following sets of biomes is placed in order from lowest.pdf
When a planetary nebula forms around a star you see gas emitting ligh.pdf
When a planetary nebula forms around a star you see gas emitting ligh.pdf
Which of the following is consistent with a history of positibe sele.pdf
Which of the following is consistent with a history of positibe sele.pdf
What is the difference between protein-based and polysaccharide-based.pdf
What is the difference between protein-based and polysaccharide-based.pdf
What is Flexibility of Command Usage.SolutionOne of the advant.pdf
What is Flexibility of Command Usage.SolutionOne of the advant.pdf
What data type is the value 25.25Solution25.25 is floating po.pdf
What data type is the value 25.25Solution25.25 is floating po.pdf
What are the reasons for joining management development programs Wh.pdf
What are the reasons for joining management development programs Wh.pdf
Using C++I keep getting messagehead does not name a type.pdf
Using C++I keep getting messagehead does not name a type.pdf
true or false A primary sources tend to be firsthand observations of.pdf
true or false A primary sources tend to be firsthand observations of.pdf
To what extent can MarxistStructuralist perspectives provide valuab.pdf
To what extent can MarxistStructuralist perspectives provide valuab.pdf
This Question 1 pt Resources are 0 A, the inputs used to make good a.pdf
This Question 1 pt Resources are 0 A, the inputs used to make good a.pdf
There are n couples invited to a banquet. Suppose there are some numb.pdf
There are n couples invited to a banquet. Suppose there are some numb.pdf
The Northwest Ordinance inclmsted all of the following EXCEPT a. Nom.pdf
The Northwest Ordinance inclmsted all of the following EXCEPT a. Nom.pdf
Recently uploaded
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcHow to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Recently uploaded (20)
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Increasing concerns about dependence on fossil fuels has generated r.pdf
- 1. Increasing concerns about dependence on fossil fuels has generated research and development of renewable fuels, such as ethanol. Ethanol can be produced from grains (for example, corn) or from plant biomass (tree chips and sawdust, composted food waste or paper products). The production of ethanol is an industrial application of fermentation studied in introductory biology laboratories. Using information from your laboratory experiments, propose the components necessary for converting corn to ethanol. (Consider reactants, products, and environmental conditions). Corn plants store energy as starch, which cannot enter the fermentation pathway directly. Based on your knowledge of the molecular structure of starch, include components necessary to convert starch to simple sugars. Solution Ethanol production from corn is a very recent and important bio-chemical process which can be used as an environmental friendly way to generate fuel. The method is simple and requires following inputs: 1. Corn source: Freshly isolted corn bolts are required for the process with sufficient water content. The dried up corn bolts are difficult to hydrolyze by enzymatic actions. 2. Enzymes: Sequential degradation of the corn's carbohydrates and sugar is brought about by activity of various enzymes. Firstly, the corn is milled into smaller pieces in liquid media which is acted upon by enzyme amylase. The amylase enzyme degrades the complex sugars into smaller carbohydrate units which can be further digested by other carbohydrate digesting enzymes. 3. Fermentation: After activity of amylase, yeast mediated fermentaion of corn is performed. This fermentation is performed under controlled environment of oxygen and temperature along with humidity and nutrients. Bio-chemically, the glucose derived from amylase action on the corn is converted into pyruvate while generating 2 molecules of ATP per glucose molecule and generation of two molecules of NADH. This pyruvate can enter glycolysis in the yeast and simultaneously fermented into acetaldehyde and generation of ethanol with consumption of two NADH molecules. Carbon dioxide is released as a by-product. Thus, this explains the utilizty of various enzymes and microbes in ethanol fermentation by yeast to generate ethanol under controlled environment.