Applying innovative nanotechnology in agriculture is considered as one of the promising approaches to obtain significant increases of crop yield. Nanoparticles (NPs) are considered potential agents for agriculture as fertilizers and growth enhancers and using of nano-fertilizers has led to an increasing in the efficiency of nutrients, the correct management of fertilizer consumption, and a reduction of the frequency of fertilizer application. Stimulants are compounds that initiate signals for cells to increase or decrease the production of secondary metabolites and plant defense response. Stimulants such as Putrescine play a role in regulating various plant physiological processes. In this regard, considering the importance of using new technologies, including nanotechnology, in sustainable agriculture to increase the quantitative and qualitative performance of agricultural products, especially oil-medicinal plants, and the lack of sufficient information about the use of iron nanoparticles and polyamine putricine in Camelina plant nutrition, The effect of foliar spraying of these stimulants on functional, morphological and physiological traits of Camelina plant (Soheil veriety) was evaluated.
Seed pretreatment is one of the simple techniques that can increase seed vigor and seedling establishment, and thus plant yield. Seed pretreatment can be done with water (hydropriming), inorganic salts such as potassium nitrate (halopriming), and growth regulators such as salicylic acid (hormone priming) and ascorbic acid (vitamin priming). Another effective factor in producing strong seeds is proper nutrition of the mother plants. Proper nutrition of the maternal plant in the form of foliar sprays with essential elements leads to the production of high-quality seeds, which affects germination and yield. Considering the positive role of seed pretreatment in improving germination rate and seedling establishment, and increasing seed yield of various plants as a result of foliar application of growth regulators and inorganic salts, this experiment was conducted to study the effect of seed pretreatment and foliar spraying with salicylic acid, ascorbic acid and potassium nitrate on improving physiological and biochemical characteristics, yield and yield components of borage.
During the 1950s and 1960s, the green revolution led to a dramatic increase in global food and fodder production to eliminate hunger and boost food security. This production enhancement was accompanied by an intensified agricultural and chemical input consumption and increased cultivated area and mechanization. Although yield per unit area has improved in most crops, concerns about food security for the world's rising population are still significant. Guaranteeing food security in the future will necessitate a shift in management approaches to boost output, agroecosystem sustainability, and stability and reduce the environmental harm caused by agriculture. The first step to achieving sustainability and ecological intensification in agricultural systems is to have a comprehensive agroecological analysis of agricultural systems in each region. Hence, the complete evaluation and analysis of agroecological features according to their type in each region is necessary for establishing an optimal management technique. After analyzing the present state of each region's shared ecosystems, the optimal strategy for boosting production stability must be devised and implemented.
Grasspea (Lathyrus sativus L.) is one of the most important forage crops in the world. It contains 12 to 20% protein. Silicon (Si) existing in the Earth’s crust is classified as the most abundant element after oxygen. Although silicon is not considered an essential element for plant growth, but a number of studies have reported that it as an important factor in plants that plays an important role in the resistance mechanisms of plants against environmental stress. Also, it plays a crucial physiological role in photosynthetic rate and chlorophyll content. One of the most effective factors in increasing the Grasspea biomass is seed inoculation with plant growth-promoting rhizobacteria (PGPR). Some of the benefits provided by PGPR are the ability to produce gibberellic acid, cytokinins and ethylene, N2 fixation, solubilization of mineral phosphates and other nutrients. Numerous studies have shown a substantial increase in dry matter accumulation via inoculation with PGPR. Some researchers reported that seed inoculation with PGPR enhanced relative water content and photochemical efficiency of PSII lathyrus under water limitations. Therefore, the aim of this study was to evaluate the effects of nano silicon and seed inoculation with plant growth-promoting rhizobacteria on biomass, nodulation and some physiological traits of Grasspea.
Long-term use of chemical fertilizers can cause many adverse effects. In addition, excessive consumption of chemical fertilizers can lead to decreased food safety and low quality of vegetables, such as the accumulation of nitrates in plants. Today, using organic fertilizers is an efficient way to achieve sustainable agricultural development. The release rate of nutrients from organic fertilizers is slow and hardly exceeds the absorption capacity of plants compared to chemical fertilizers.
Salinity stands as a significant environmental stressor that profoundly curtails the growth and yield of crop plants. This adversity also extends to the impairment of pigments and plastids, leading to diminished chlorophyll indices, rates, and grain-filling durations. To counteract the deleterious impact of such stressors on plant growth, a spectrum of strategies has been devised. Prominent among these strategies are plant growth-promoting rhizobacteria, exemplified by azospirillum, and the utilization of nanoparticles like zinc and silicon. These factors play a pivotal role in elevating yield outcomes. Zinc's pivotal involvement spans protein metabolism, photosynthetic activities, and diverse physiological traits within plants. Particularly noteworthy is its contribution to rectifying zinc deficiency, a particularly critical concern in plants cultivated in high-pH soils. Notably, recent research has illuminated the potential of applying minute quantities of micronutrients, notably zinc via foliar spraying, in bolstering plant resilience against salt stress. Likewise, silicon emerges as a supplemental micronutrient that imparts heightened resistance to environmental stresses, fostering increased resilience within biological systems. Therefore, this study aimed to evaluate the effects of application of plant growth-promoting rhizobacteria and nanoparticles (zinc and silicon) on the yield, photosynthetic pigments, and filling components of triticale grain under salt stress.
Salinity is one of the major constraints to wheat growth, which hampers production, causing yield loss in arid and semi-arid regions. Reductions in growth resulting from high salinity are because of both osmotic stress, inducing a water deficit, and the effects of excess Na+ and Cl– ions on critical biochemical processes. Salt stress induces a significant reduction in photosynthesis through the reduction of leaf area and photosynthetic pigments. Several strategies have been developed to decrease the toxic effects caused by high salinity on plant growth. Among them, the use of plant growth-promoting rhizobacteria (PGPR) such as Pseudomonas and Mycorrhiza play an important role in yield improvement. Many studies have been published on the beneficial effects of bacterial inoculation on plant physiology and growth under salt stress. One of the common hypotheses employed in most of the studies conducted under salinity stress was the lowering of ethylene level by the ACC-deaminase activities of PGPR and improved plant growth and yield under salinity stress.
It was reported that the application of Pseudomonas spp. improved plant growth by decreasing the uptake of Na+ and increasing the activities of antioxidant enzymes under salinity stress. The selective uptake of K+ as opposed to Na+ is considered one of the important physiological mechanisms contributing to salt tolerance in many plant species. Inoculation with PGPR significantly decreased Na+ uptake and increased K+ content and enhanced levels of K+ that could be to mitigate oxidative stress imposed by higher salinity. Some researchers have reported that PGPR species like Azotobacter and Pseudomonas increased the growth and biomass of canola (Brassica napus L.) under salinity stress.
A Better understanding of wheat physiological responses under salinity may help in programs in which the objective is to improve the grain yield under salinity stress. Therefore, this study aimed to evaluate the physiological, stomata conductance, along with root and shoot Na+/ K+ ratios) of wheat to cycocel and PGPR application under salinity stress.
The most important problem that threatens food security of any country and the world is the lack of adequate water resources, so one of the ways to deal with this crisis is to use plants with low water requirements and high water use efficiency. Among the plants, we can name Quinoa, which is one of the plants that has been less studied and exploited in Iran. Since the planting date has the greatest impact on the physiological characteristics of the crop compared to other cropping treatments, so choosing the appropriate planting date can also create the greatest correlation between plant growth trends and climatic conditions. Undoubtedly, the use of biological fertilizers, in addition to the positive effects it has on all soil properties, is also economically, environmentally and socially fruitful and can be a suitable and desirable alternative to chemical fertilizers. Therefore, the aim of this study was to determine the response to deficit irrigation, planting date and application of different biofertilizers in quinoa.
In the pursuit of a resilient and progressive agricultural system, the incorporation of diverse fertilizers is deemed essential. This practice not only enhances product quality but also aids in cost reduction. However, over-reliance on a specific type of input can inadvertently lead to unintended repercussions. The unrestricted utilization of chemical fertilizers, for instance, can precipitate adverse outcomes such as imbalanced pH levels, the accumulation of heavy elements, soil structure deterioration, and environmental contamination. Conversely, organic fertilizers, while environmentally friendly, often release nutrients at a slower rate, potentially disrupting optimal plant growth. To attain a balanced and sustainable agricultural approach, the combined application of organic and chemical fertilizers is advocated. Moreover, harnessing the biological potential inherent in soil ecosystems, including beneficial microbial communities encompassing bacteria and fungi, emerges as a promising avenue in cultivating sustainable agriculture. Acknowledging the adverse impact of late-season heat stress on wheat production in Khuzestan and recognizing the significance of reducing chemical fertilizer usage while augmenting organic and biological fertilizers to foster ecological health, this experiment undertakes the exploration of the effects of a synergistic approach. Specifically, it delves into the combined utilization of nitrogen and compost fertilizers, complemented by the incorporation of plant growth-promoting rhizobacteria. This endeavor aims to shed light on how this combined strategy operates within the context of terminal heat stress, assessing its influence on the physiological attributes and yield of the wheat cultivar Chamran 2.
Seed pretreatment is one of the simple techniques that can increase seed vigor and seedling establishment, and thus plant yield. Seed pretreatment can be done with water (hydropriming), inorganic salts such as potassium nitrate (halopriming), and growth regulators such as salicylic acid (hormone priming) and ascorbic acid (vitamin priming). Another effective factor in producing strong seeds is proper nutrition of the mother plants. Proper nutrition of the maternal plant in the form of foliar sprays with essential elements leads to the production of high-quality seeds, which affects germination and yield. Considering the positive role of seed pretreatment in improving germination rate and seedling establishment, and increasing seed yield of various plants as a result of foliar application of growth regulators and inorganic salts, this experiment was conducted to study the effect of seed pretreatment and foliar spraying with salicylic acid, ascorbic acid and potassium nitrate on improving physiological and biochemical characteristics, yield and yield components of borage.
During the 1950s and 1960s, the green revolution led to a dramatic increase in global food and fodder production to eliminate hunger and boost food security. This production enhancement was accompanied by an intensified agricultural and chemical input consumption and increased cultivated area and mechanization. Although yield per unit area has improved in most crops, concerns about food security for the world's rising population are still significant. Guaranteeing food security in the future will necessitate a shift in management approaches to boost output, agroecosystem sustainability, and stability and reduce the environmental harm caused by agriculture. The first step to achieving sustainability and ecological intensification in agricultural systems is to have a comprehensive agroecological analysis of agricultural systems in each region. Hence, the complete evaluation and analysis of agroecological features according to their type in each region is necessary for establishing an optimal management technique. After analyzing the present state of each region's shared ecosystems, the optimal strategy for boosting production stability must be devised and implemented.
Grasspea (Lathyrus sativus L.) is one of the most important forage crops in the world. It contains 12 to 20% protein. Silicon (Si) existing in the Earth’s crust is classified as the most abundant element after oxygen. Although silicon is not considered an essential element for plant growth, but a number of studies have reported that it as an important factor in plants that plays an important role in the resistance mechanisms of plants against environmental stress. Also, it plays a crucial physiological role in photosynthetic rate and chlorophyll content. One of the most effective factors in increasing the Grasspea biomass is seed inoculation with plant growth-promoting rhizobacteria (PGPR). Some of the benefits provided by PGPR are the ability to produce gibberellic acid, cytokinins and ethylene, N2 fixation, solubilization of mineral phosphates and other nutrients. Numerous studies have shown a substantial increase in dry matter accumulation via inoculation with PGPR. Some researchers reported that seed inoculation with PGPR enhanced relative water content and photochemical efficiency of PSII lathyrus under water limitations. Therefore, the aim of this study was to evaluate the effects of nano silicon and seed inoculation with plant growth-promoting rhizobacteria on biomass, nodulation and some physiological traits of Grasspea.
Long-term use of chemical fertilizers can cause many adverse effects. In addition, excessive consumption of chemical fertilizers can lead to decreased food safety and low quality of vegetables, such as the accumulation of nitrates in plants. Today, using organic fertilizers is an efficient way to achieve sustainable agricultural development. The release rate of nutrients from organic fertilizers is slow and hardly exceeds the absorption capacity of plants compared to chemical fertilizers.
Salinity stands as a significant environmental stressor that profoundly curtails the growth and yield of crop plants. This adversity also extends to the impairment of pigments and plastids, leading to diminished chlorophyll indices, rates, and grain-filling durations. To counteract the deleterious impact of such stressors on plant growth, a spectrum of strategies has been devised. Prominent among these strategies are plant growth-promoting rhizobacteria, exemplified by azospirillum, and the utilization of nanoparticles like zinc and silicon. These factors play a pivotal role in elevating yield outcomes. Zinc's pivotal involvement spans protein metabolism, photosynthetic activities, and diverse physiological traits within plants. Particularly noteworthy is its contribution to rectifying zinc deficiency, a particularly critical concern in plants cultivated in high-pH soils. Notably, recent research has illuminated the potential of applying minute quantities of micronutrients, notably zinc via foliar spraying, in bolstering plant resilience against salt stress. Likewise, silicon emerges as a supplemental micronutrient that imparts heightened resistance to environmental stresses, fostering increased resilience within biological systems. Therefore, this study aimed to evaluate the effects of application of plant growth-promoting rhizobacteria and nanoparticles (zinc and silicon) on the yield, photosynthetic pigments, and filling components of triticale grain under salt stress.
Salinity is one of the major constraints to wheat growth, which hampers production, causing yield loss in arid and semi-arid regions. Reductions in growth resulting from high salinity are because of both osmotic stress, inducing a water deficit, and the effects of excess Na+ and Cl– ions on critical biochemical processes. Salt stress induces a significant reduction in photosynthesis through the reduction of leaf area and photosynthetic pigments. Several strategies have been developed to decrease the toxic effects caused by high salinity on plant growth. Among them, the use of plant growth-promoting rhizobacteria (PGPR) such as Pseudomonas and Mycorrhiza play an important role in yield improvement. Many studies have been published on the beneficial effects of bacterial inoculation on plant physiology and growth under salt stress. One of the common hypotheses employed in most of the studies conducted under salinity stress was the lowering of ethylene level by the ACC-deaminase activities of PGPR and improved plant growth and yield under salinity stress.
It was reported that the application of Pseudomonas spp. improved plant growth by decreasing the uptake of Na+ and increasing the activities of antioxidant enzymes under salinity stress. The selective uptake of K+ as opposed to Na+ is considered one of the important physiological mechanisms contributing to salt tolerance in many plant species. Inoculation with PGPR significantly decreased Na+ uptake and increased K+ content and enhanced levels of K+ that could be to mitigate oxidative stress imposed by higher salinity. Some researchers have reported that PGPR species like Azotobacter and Pseudomonas increased the growth and biomass of canola (Brassica napus L.) under salinity stress.
A Better understanding of wheat physiological responses under salinity may help in programs in which the objective is to improve the grain yield under salinity stress. Therefore, this study aimed to evaluate the physiological, stomata conductance, along with root and shoot Na+/ K+ ratios) of wheat to cycocel and PGPR application under salinity stress.
The most important problem that threatens food security of any country and the world is the lack of adequate water resources, so one of the ways to deal with this crisis is to use plants with low water requirements and high water use efficiency. Among the plants, we can name Quinoa, which is one of the plants that has been less studied and exploited in Iran. Since the planting date has the greatest impact on the physiological characteristics of the crop compared to other cropping treatments, so choosing the appropriate planting date can also create the greatest correlation between plant growth trends and climatic conditions. Undoubtedly, the use of biological fertilizers, in addition to the positive effects it has on all soil properties, is also economically, environmentally and socially fruitful and can be a suitable and desirable alternative to chemical fertilizers. Therefore, the aim of this study was to determine the response to deficit irrigation, planting date and application of different biofertilizers in quinoa.
In the pursuit of a resilient and progressive agricultural system, the incorporation of diverse fertilizers is deemed essential. This practice not only enhances product quality but also aids in cost reduction. However, over-reliance on a specific type of input can inadvertently lead to unintended repercussions. The unrestricted utilization of chemical fertilizers, for instance, can precipitate adverse outcomes such as imbalanced pH levels, the accumulation of heavy elements, soil structure deterioration, and environmental contamination. Conversely, organic fertilizers, while environmentally friendly, often release nutrients at a slower rate, potentially disrupting optimal plant growth. To attain a balanced and sustainable agricultural approach, the combined application of organic and chemical fertilizers is advocated. Moreover, harnessing the biological potential inherent in soil ecosystems, including beneficial microbial communities encompassing bacteria and fungi, emerges as a promising avenue in cultivating sustainable agriculture. Acknowledging the adverse impact of late-season heat stress on wheat production in Khuzestan and recognizing the significance of reducing chemical fertilizer usage while augmenting organic and biological fertilizers to foster ecological health, this experiment undertakes the exploration of the effects of a synergistic approach. Specifically, it delves into the combined utilization of nitrogen and compost fertilizers, complemented by the incorporation of plant growth-promoting rhizobacteria. This endeavor aims to shed light on how this combined strategy operates within the context of terminal heat stress, assessing its influence on the physiological attributes and yield of the wheat cultivar Chamran 2.
Intensive agriculture, despite high production, has adverse environmental effects, mainly due to the use of pesticides and chemical fertilizers. Therefore, we need alternative agricultural systems that are more economically and environmentally sustainable to produce crops. One of the sustainable methods in the production of agricultural products is intercropping. Intercropping of two or more species in a plot of land can increase biodiversity and resource utilization as agricultural perspective, which in turn can lead to increased yield stability. Intercropping uses resources more efficiently than monoculture, preventing the growth and spread of weeds by shading and suffocating weeds, and in some cases with allelopathic. Intercropping of cereals and legumes is recommended for the development of sustainable food production systems, especially in planting systems based on reduced consumption of foreign inputs. The importance of these systems depends on the nitrogen stabilized by the legumes. The aim of this experiment was to study the effects of row intercropping of barley and vetch and different levels of ammonium nitrate fertilizer on weed biomass, yield components and yield of two species in Karaj climatic condition.
Introduction
Nowadays, the cultivation of plants adapted to adverse conditions, such as drought and salinity, in the country has been considered. Meanwhile, Kochia scoparia, one of the forgotten plants, due to its classification in the group of halophytes, has specific characteristics suitable for cultivation in low-water and saline areas (Salehi, Kafi, & Kiani, 2012). This plant is known as an important annual forage crop, and its grains also have high nutritional value and oil, which can be considered for future industrial applications (Salehi et al., 2012). Studies on the salinity tolerance of the Kochia plant have shown that it is suitable for cultivation in saline areas, and in terms of quantity and quality, can compete with conventional forage plants. The use of natural organic materials, such as humic acid, has received more attention. These materials, as part of soil organic matter, are influenced by physical, chemical, and microbiological changes in biological molecules (Sabzevari & Khazaei, 2009; Dong, Córdova-Kreylos, Yang, Yuan, & Scow, 2009). Additionally, nitrogen is the most important element needed for plant growth and development. It is also a key component in many biological compounds, including proteins, nucleic acids, some hormones, and chlorophyll. Nitrogen plays an essential role in photosynthetic processes and the final function of plants (Kaur, Gupta, & Kaur, 2002; Taiz, Zeiger, Møller, & Murphy, 2015). As a result of this research, a combination of nitrogen and humic acid can be used as nutritional resources in salt stress conditions.
Materials and Methods
This experiment was conducted in the form of split plots based on the randomized complete block design with three replications in the Saline Research Farm of Ferdowsi University of Mashhad in the 2015 growth season. The main plot included drought stress with a four-week interruption of irrigation at three levels of control (irrigation until the end of the growing season), after establishment (50 days after planting), the beginning of flowering (71 days after planting) and late flowering (82 days after planting) The subplot was included nitrogen application at three levels of zero, 100 and 200 kg.ha-1 from urea fertilizer source. The optimum level of humic acid (2 per thousand) was done as seed at the time of planting for all treatments.
Results and Discussion
The results showed that the drought stress during vegetative and reproductive growth stages had a negative effect on the Kochia plant. However, its effect in the early stages of vegetative growth (after establishment) was greater than the stress at the end of the season (late flowering). Drought stress has a negative effect on Kochia grain yield by reducing the concentration of chlorophyll a, altering the chlorophyll a to b ratio, decreasing carotenoid concentration, and affecting relative leaf water content. However, seed treatments of humic acid and its combination with 100 kg.ha-1 nitrogen level by increasing th
The excessive use of chemical fertilizers is a leading cause of environmental pollution in the agriculture sector. Therefore, optimizing fertilizer application is a crucial approach to boost production while minimizing environmental harm. On the other hand, application of chemical fertilizers along with manure can be considered as the proper management system that led to reduce the amount of chemical fertilizers and adverse effects on environment and also improve nutrition for plants. Response-surface methodology is a powerful tool to optimize production resources which decreases cost and time of the experiments by reducing number of them. Therefore, the aim of the study was optimization of chemical fertilizers of nitrogen and phosphorus along with manure application in fodder maize production.
The excessive use of chemical fertilizers is a leading cause of environmental pollution in the agriculture sector. Therefore, optimizing fertilizer application is a crucial approach to boost production while minimizing environmental harm. On the other hand, application of chemical fertilizers along with manure can be considered as the proper management system that led to reduce the amount of chemical fertilizers and adverse effects on environment and also improve nutrition for plants. Response-surface methodology is a powerful tool to optimize production resources which decreases cost and time of the experiments by reducing number of them. Therefore, the aim of the study was optimization of chemical fertilizers of nitrogen and phosphorus along with manure application in fodder maize production.
In recent decades, the need for increased food production has resulted in the expansion of intensified agriculture practices characterized by high consumption of inputs, thereby reducing agricultural sustainability. The agricultural sector's contribution to the world's energy consumption, ecological footprint, and greenhouse gas emissions has grown substantially. Emissions of greenhouse gases have negative ecological effects, including climate change, global warming, and diminished sustainable development. In this sector, energy analysis and greenhouse gas emissions in ecosystems are the most common methods for assessing sustainability. This study was conducted to evaluate the sustainability of canola agroecosystems by analyzing energy consumption, carbon footprint, and greenhouse gas emissions.
Nitrogen (N) is one of the main limiting factors in agroecosystems all around the world. However, high application rates of N fertilizers would lead to negative environmental consequences. Reduction of N fertilizers consumption decreases production costs and environmental pollution. Therefore, N efficiency to be enhanced due to the high N fertilizer cost and required measures to prevent the waste of N. Cultivation of diverse crop cultivars with higher resources absorption and utilization efficiency is one of the major approaches in sustainable agriculture that would result in the effective use of natural and chemical inputs and reduce significantly the environmental risks. Quchan City is one of the potato production poles in Khorasan Razavi province. In this region, large amounts of N fertilizers annually are consumed in the potato agroecosystem. Therefore, the potato of the present study was evaluating N uptake and utilization efficiency, and finally, N uses efficiency in the potato agroecosystem of Quchan.
Water is now the main limiting factor for crop production in arid and semi-arid regions. Water-cut or irrigation interruption has been suggested as one of the main strategies agro-technique to get the most benefit from limited water resource available. In this regard, plant growth stage, time of stress induction and the genotype are the main key factors to determine the degree of success. Canola is one of the most important oil crop. It can survive some degree of water stress while there is a need for research to find the most appropriate genotypes for plantations in water-limited areas.
Introduction
The striped bug, Graphosoma lineatum L. is one of the pests of Apiaceae family such as parsley, carrot, celery and some medicinally important plants. The adults and nymphs of this insect feed on seeds of host plants. The eggs of the striped bug have an important role in mass rearing program of some parasitoids. Nutritional supplements undertake an essential function in mass rearing of insects and increase the efficiency of production. Vitamins such as B group have different functions in physiology of insects. The growth and development of insects hinge on acquiring essential nutrients through food materials. Apart from their primary food source, insects rely on essential amino acids and certain minerals for proper nutrition. These crucial components must be obtained from their food sources. Symptoms of nutritional deficiency, as reported in various research studies, include delayed growth, weight loss, prolonged immature stages, increased mortality, wing deformities, alterations in mating behaviors, and various physiological issues. In this study the effects of some vitamins and amino acids on anatomy of salivary glands, total protein of body, developmental time and fecundity of G. lineatum were evaluated in controlled conditions.
Material and Methods
Insects reared on parsley seeds adhered on the inner side of big plastic containers in controlled condition. Supplements including vitamins B12, B6, B1 and Serine and Phenylalanine amino acids selected for evaluation. These supplements used for the treatmnet of G. lineatum in four different concentrations dissolved in water. For evaluating the effects of nutritional supplements on anatomy of salivary glands, both glands separate after dissection of adult’s thorax, and dimension of glands including width and length of posterior and anterior lobs, measured by micrometer apparatus located on stereomicroscope. Total body protein measured by Kjeldahl apparatus after well drying the total body of insects in oven followed by fine powder of dry materials. Total protein was determined using a standard method, calculated by multiplying the nitrogen amounts by 6.38, a constant value. In distinct experiments, the impact of nutritional supplements on the duration of each nymphal stage was investigated. One-day-old eggs were employed for this purpose. Following treatment justification, the time required for the development of each instar was recorded on a daily basis. All tests were replicated three times, with distilled water used for the control treatment. The data were analyzed by One-way ANOVA experimental randomized design and Duncan’s multiple range test using SAS software used for comparing the means.
Results and Discussion
The results disclosed a significant impact of all vitamins and amino acids on all studied parameters. Notably, in the case of salivary glands, the posterior lobe exhibited a more pronounced effect in insects fed with B1, B6, and Phenylalanine. Different concentrations of
South of Iran has been located in the dry belt and desert strip thus water stress has always been one of the serious problems in its agriculture (Buzarjomehri et al., 2020). Intercropping is the cultivation of two or more plant species in a specific land and growing season, which is important in agricultural systems with limited resources and low input (Brooker et al., 2015). Due to the differences in the rooting depth, lateral expansion, and root density of cereals and legumes, they have been the best candidates for intercropping traditionally for limited soil water and nutrient availability environments (Babalola, 1980; Haynes, 1980). Application of bio-fertilizers (PGPR bacteria) that have nitrogen (N) fixation and phosphorus (P) solubilizing activity (Azospirillum brasilense and Pseudomonas fluorescence, respectively) is a promising approach for obtaining N, P, and water-restricted areas (Tien et al, 1979; Barea, 2015). Organic manures enhance soil water holding capacity and serve as excellent slow-release sources of nitrogen (N) and phosphorus (P) in the soil (Risse et al., 2006). This study aimed to investigate the effect of different fertilizer systems (chemical, integrated, and bio-organic) on triticale grain yield and its components in sole and intercropped triticale in triticale/chickpea system under late season water stress in a hot and dry area of southern Iran (Fars province - Darab).
Maize (Zea mays L.) is one of the most important cereals after wheat and rice in the tropical and temperate regions of the world. Also, its mean production is 8 ton ha-1. Moreover, the total area of under cultivation is 132572 hectares in Iran. Crop simulation models can play an important role in improving agricultural production systems in many developing countries. Crop models can simulate plant growth processes and grain yield instead of conducting several years of field experiments. On the other hands, crop simulation models should be calibrated and evaluated with independent data sets under different climatic conditions. Therefore, the purpose of this research was evaluation of the APSIM model for simulation of growth, development and yield of maize hybrids in Kerman province under different amounts of nitrogen.
Since the development of crop cultivation and their yield depend on irrigation and since drought is one of the features of our country, one of the solutions to deal with these problems is the implementation of applied research in the field of stress-resistant plants cultivation such as quinoa. Also, considering the important role of potassium and zinc elements in the plant, providing a sufficient amount of these elements under drought stress can be effective in increasing the plant's resistance to this type of stress. Considering the genetic differences of plants and their different reactions in the face of environmental stress such as drought stress, and different fertilization of genotypes, it seems necessary to carry out this research to investigate the application of potassium and zinc chelates on the morpho-physiological and yield indicators of three quinoa genotypes under drought stress conditions in Razavi Khorasan climate.
Fennel is a cross-pollinating plant and one of the most important medicinal plants of the Apiaceae family, whose essential oil is widely used in various pharmaceutical, food, and cosmetic industries. Fennel originated from the Mediterranean region and is a biennial or perennial species. Fennel essential oil has been demonstrated to have antioxidant, anti-cancer, antibacterial, antifungal, and analgesic effects. Improving yield is one of the important goals of breeding, and the use of heterosis as one of the powerful tools to improve yield has always been of interest to breeders. This study was conducted to evaluate seed yield and yield components of three synthetic cultivars of fennel and compere with eight parental populations.
There is an urgent need to increase per capita food production to compete with high population growth while maintaining environmental sustainability. Because nitrogen plays a vital role in food production for humans and livestock, nitrogen management is essential in food production. In most cropping systems, nitrogen management seems to be a major challenge due to its high mobility and natural tendency for losses from the soil-plant system to the environment. Soil organic carbon plays a key role in improving soil ecological conditions. Adding organic matter to the soil is an excellent tool for improving physical, chemical and biological conditions and is almost always desirable. Soil organic carbon stock of crop ecosystems may be increased by improving farming practices. The application of green manure, fertilizer and the return of crop straw into the soil are known as management operations to increase soil organic carbon. Fertilizers, especially nitrogen, increase crop yield, and organic carbon is returned to the soil through roots and debris, which in most cases leads to increased soil organic carbon.
Introduction
Ultrafiltration is one of the most common membrane processes in the dairy industry, especially for condensing and separating milk components. Using this process, several products can be produced, including milk concentrate used for cheese production, low-lactose dairy products, milk protein concentrate, and serum proteins for dietary supplements. The efficiency and cost of a membrane process depend on the percentage of rejection of the soluble components. Therefore, the use of concentrated milk made by ultrafiltration in the production of various dairy products depends on the efficiency of the membrane process and the changes in milk components during this process. On the one hand, the physicochemical properties of camel milk are different from those of cow milk, especially in terms of type and amount of protein. Because significant differences exist between the physicochemical properties of camel and cow milk, likely, the membrane processing conditions and the physicochemical properties of their products will be different completely. Although many studies have been conducted on the efficacy of the ultrafiltration processing of cow milk, there is no information about the efficacy of camel milk ultrafiltration, and most of the research done regarding optimizing is based on classical algorithms, Therefore, in this study, the effects of transmembrane pressure and temperature on the solutes rejection (protein, lactose, ash, and total solids) during camel milk ultrafiltration process were investigated, Then, these properties were optimized using particle swarm algorithm. Also, because the performance of the particle swarm algorithm is highly dependent on related parameters such as the number of iterations, the number of particles, accelerate constant, inertia weight, and velocity of the particles, so before optimization, the effect of these parameters on optimal responses were examined by partial least squares regression (PLS).
Materials and Methods
In this study, a pilot crossflow ultrafiltration system was used. A UF membrane (Model 3838 HFK-131, Koch membrane systems, Inc., USA) made of polysulfone amid (PSA) with MWCO of 20 kDa was applied. Camel milk was purchased from a local market in Mashhad and for camel skim milk production, its fat was separated by a pilot plant milk fat separator in the Food Research Complex, Ferdowsi University of Mashhad. The weight percentages of protein, fat, lactose, ash, and total solids of UF permeate samples were measured by ISO 8968-1:2014, ISO 1211: 2010, ISO 26462/IDF 214:2010, ISO 5544:2008, and ISO 6731:2010 at two replications, respectively. the process treatments were performed in the form of a central composite design (CCD) (5 replications at the central point) for two independent variables at three levels so that the total number of 13 treatments was obtained. The data were modeled using the statistical software of Design Expert (version 11) based on the response surface methodology and eac
Introduction
The increase in people's awareness of the negative effects of chemical preservatives has led to more research on the antimicrobial effect of plant essential oils and their potential to be used as preservative compounds. Strawberry (Fragaria ananassa cv. qingxiang) is one of the most popular and widely consumed berries due to its taste, sweetness and healthy function. The taste of strawberry is related to its hardness, viscosity, sugars, protein, total soluble solid, titratable acidity content and minerals like P, K, Ca and Fe. It is a good source of polyphenolic compounds such as flavanols and has antioxidant activity. This, together with higher vitamin C content in strawberries, contributes beneficial effects on the maintenance of consumer health. Strawberry has higher antioxidant activities than orange, grape, banana, apple, etc. Strawberries are among the fruits sensitive to mechanical and physiological damage and have a fast metabolism and deterioration during the storage period. For this reason, it is necessary to use safe methods to control spoilage and maintain the quality of strawberry fruit during storage.
Materials and Methods
The experiment was conducted in a completely randomized design, in a 5 x 4 factorial scheme (5 treatments x 4 periods evaluated), with four replications The first variable was the type of material with different concentrations in five levels including 0, 0.3%, 0.6% carvacrol, the combination of chitosan with 0.3% and 0.6% carvacrol, and the second variable was storage time in four periods including 0, 10, 20, 30 days of storage. The harvested fruits were kept at 4°C and with a relative humidity of 90±5% and parameters such as weight loss, pH, firmness of the fruit tissue, acidity (TA), soluble solids (TSS) and taste index, vitamin C, phenol and flavonoid, fruit shelf life (number of days) during the storage period were investigated and studied.
Results and Discussion
The ANOVA results showed that the effect of the type of treatment and storage time on all investigated traits except for the firmness of the fruit texture was significant at the probability level of 1%. The fruits treated with the combination of chitosan and carvacrol 0.6% had more texture firmness, vitamin C, total phenol content and the amount of soluble solids and better shelf life than the control. In all four storage times, the highest content of total phenol (2.49 mg of gallic acid per 100 gr FW), total flavonoid (0.435 mg of Quercetin per 100 gr FW) and firmness (3.80 N) was related to the combined treatment of chitosan with carvacrol 0.6% and the lowest amount was related to the control. The firmness of the fruit tissue gradually decreased during storage, but this process was observed at a significantly slower rate in the treated fruits.
Conclusion
Considering the increase of 10 and 12 days of shelf life post- harvest of the combined treatment of chitosan + 0.6% carvacrol compared to other treatments and the control, henc
Introduction
In conventional formulations such as emulsifiable concentrates (EC), wettable powders, soluble liquids, etc., complete availability of the active agent is usually considered immediate or rapid following usage. Application rates of these formulations of pesticides are greater than the minimum threshold concentration to counter losses from sorption, volatilization, photodecomposition, microbial and chemical degradation, and leaching. Controlled-release technology for pesticides could reduce environmental damage and increase efficiency by enhancement of delivery to the site of action. This survey was conducted to determine the possibility of EPTC and trifluralin efficiency improvement by using microencapsulated formulation (MC) that were first synthesized in Iran.
Materials and Methods
Two separated greenhouse experiments were conducted in Tirtash Research and Education Center (Mazandaran–Iran) in 2014. The experiments were carried out in a factorial arrangement based on a randomized complete block design with three replications. The Microencapsulated formulation of EPTC and trifluralin herbicides were compared with emulsifiable concentrate formulation (Eradicane 82% and Treflan 48%) in 0 (control), 25, 50, 75 and 100 percent of active ingredient (a.i.) (4.92 and 1.2 kg a.i./ha, recommended doses for EPTC and trifluralin, respectively). For this purpose, the soil of pots were infested with the seed of Green foxtail (Setaria viridis) and Redroot pigweed (Amaranthus retroflaxus). The responses of weeds to treatments, specifically seedling number, were analyzed using ANOVA tests, non-linear regression, and fitting to three parameters of Weibull and log-logistic equations. This analysis was based on Akaike's Information Criterion, Residual Standard Error, and Lack-of-Fit Test indices in the R3.4.1 program. The effective dose were determined for 10, 50 and 90 percent of weed control (ED10, ED50 and ED90, respectively). Relative potency index (R) of formulation types were determined by divided ED50 of EC into MC formulations.
Results and Discussion
According to the results of the experiments, the formulation type had a significant effect on the weed numbers. The MC formulations of EPTC increased Green foxtail and Redroot pigweed control efficiencies. The ED10, ED50 and ED90 decreased from 0.72, 2.94 and 7.18 kg a.i.ha-1 in the EC to 0.41, 1.87 and 4.89 kg a.i.ha-1 in the MC formulation for Green foxtail and 1.08, 3.29 and 10.02 kg a.i.ha-1 in the EC to 0.57, 2.36 and 9.67 kg a.i.ha-1 in the MC formulation for Redroot pigweed. The R index of EPTC in Green foxtail and Redroot pigweed control were 1.57 and 1.39, respectively. Weed control increased as trifluralin dosage increased in both of the formulation types, although in higher doses of the MC, weed control efficiency increased more than the EC formulation. So the efficiency of the MC formulations depended on application dosages. The ED10, ED50 and ED90 of Green foxtail were 0.14, 0.55 an
Introduction
Today, carrots are widely used in freshly cut products, including ready to eat salads, however, its shelf life is reduced due to the damage caused on the texture of the product which accelerate the reduction of nutritional value as well as the growth of microorganisms, (Azizian et al., 2020). To increase the shelf life of freshly cut products, it is recommended to use coatings on the surface of these products. Alginate is a hydrophilic biopolymer and having unique colloidal characteristics, it demonstrates a suitable coating function. Olivas et al. (2008) showed that by coating fresh apple slices with alginate and antimicrobial agents increased the shelf life of apple and decreased weight loss. Among the native plants of Iran, we can mention the Oliveria plant, which belongs to the Amblifra family. The aerial parts of this plant have a significant amount of essential oils (EOs). Researches by Amin et al. (2005) on the antimicrobial properties of Oliveria essential oils have shown a broad-spectrum antimicrobial activity against all studied organisms, and this effect is comparable to that of commercial antibiotics. Packaging with modified atmosphere is one of the best ways to increase the shelf life of fruits and vegetables. The purpose of this study was to investigate the effect of alginate and Oliveria essential oils on the physicochemical and microbial characteristics of grated carrots in polypropylene packages with modified atmosphere during storage.
Methods
Essential oil of Oliveria plant was extracted, dehydrated by sodium sulfate and placed in sealed glass container and stored at 4˚C until using. Carrots prepared from Wilmoren cultivar. An industrial crusher crushed the carrots, and samples were coated by treatment solutions. Two treatments of coating were prepared, one as control with 0% and the other one with 1.5% alginate with stirring and moderate heat (50-60°C) (Lu et al., 2009). Then the Oliveria EO was added to the alginate solution at the specified concentration. The resulting solution was deaerated at 25˚C.
T1: control sample (without coating)
T2: 1.5% alginate
T3: 150 ppm Olivieria EO
T4: 250 ppm Olivieria EO
T5: 1.5% alginate and 150 ppm of Olivieria EO
T6: 1.5% alginate and 250 ppm of Olivieria EO
After weighing (250 g), the grated carrots (control and coated) were placed in 10 g polypropylene packages of suitable food grade in dimensions of 50 × 190 × 144 cm and the package was injected with 5% O2, 5% CO2 and 90% N2. The packages were then stored in the refrigerator for 12 days at 4±1˚C. All experiments were performed on days 1, 3, 6, 9, and 12.
Evaluation of Chemical, Microbial and Sensory Characteristics
A pH meter used for pH determination (Rad et al., 2020). The acidity measured based on Rocha et al. (2007) method.
The weight was reported using pre and post-storage weight. The carotenoid concentration calculated by Rocha et al. (2007) method. Total soluble solids determined by refractometer (Rad et al., 20
The increasing demand for medicinal plants in traditional medicine as well as the pharmaceutical industry has created the need for some plants to be grown commercially, but the lack of soil moisture poses a serious threat to their production. Planting method can affect the emergence and growth rate of crop and lead to decrease water consumption and increase irrigation water efficiency as yield increases. Roselle (Hibiscus sabdariffa L.) is one of the drought tolerant plants. Saving water consumption by cultivating drought tolerant plants has been proposed as a strategy to combat drought. It should be noted, however, that irrigation without proper planning can reduce the growth and production of crops. In this regard, determining time of deficit irrigation with minimum damage is an appropriate solution that achieves optimum yield while saving water consumption. The aim of this study was to investigate the effect of different irrigation regimes and planting method on some physiological traits, yield and water use efficiency of Roselle plant.
The development process of organic cultivation in Iran is not favorable because the average growth rate of organic agriculture development from 2008 to 2019 according to FAO statistics in 2021 is equal to -0.47% and this is while foods contaminated with various substances Chemicals have an unpleasant effect on the general health of society. According to the statistics of 2021, 600 million people in the world, i.e. 1 out of every 10 people, will get sick after eating food. Since any change in the use of chemicals in agriculture should be based on the behavior of farmers, the purpose of this study is to investigate the behavioral intention to produce organic pistachio production among 5200 pistachio growers in Ardakan county, Yazd province, using the Decomposed Theory of Planned Behavior (DTPB) analysis.
Evaluation and Optimization of Energy and Environmental Indicators Using Life...J. Agricultural Machinery
Introduction: Environmental crises and resource depletion have adversely affected environmental resources and food security in the world. Therefore, with the global population growth in the coming years and the rising need to produce more food, attention must be given to environmental issues, energy consumption, and sustainable production. The purpose of this study is to evaluate the pattern of energy consumption, environmental impacts, and optimization of the studied energy indicators in dairy cattle breeding industrial units in Khuzestan province, Iran.
Materials and Methods: This research was conducted in Khuzestan province, located in the southwest of Iran. Energy indicators including energy ratio, energy efficiency, specific energy, and net energy were used to determine and analyze the relationships between the output and input energy. Additionally, the life cycle assessment methodology was used to assess the environmental impact. Life cycle assessment includes a goal statement, identification of inputs and outputs, and a system for assessing and interpreting environmental impacts, and can be a good indicator for assessing environmental issues related to production. The life cycle assessment method used in this study was CML-IA baseline V3.05, which includes the four steps of (1) selecting and classifying impact categories, (2) characterizing effects, (3) normalizing, and (4) weighting. Overall, 11 impact groups were studied. The Data Envelopment Analysis (DEA) method with the Anderson-Peterson model was used for optimization. This method identifies the most efficient production unit and makes it possible to rank all of the farms in the region. In this study, each production unit (farm) was considered a decision-making unit (DMU), and its production efficiency was determined based on two models. Namely, the Charnes, Cooper, and Rhodes (CCR) model also known as Constant Return to Scale (CRS), and the Banker, Charnes, and Cooper (BCC) model also known as Variable Return to Scale (VRS).
Results and Discussion: The results showed that the input and output energies per cow per day were 173.34 and 166 MJ, respectively. Livestock feed and electricity accounted for 65.47% and 27.2% of the input energy, respectively, while the oil used for tiller-scraper lubrication of fertilizer collection accounted for only 0.01%, making it the lowest input energy. Energy efficiency, specific energy, and net energy were calculated as 0.95, 0.13 kg MJ-1, 7.51 MJ kg-1, and -7.20 MJ per cow, respectively. In the abiotic depletion impact group, animal feed, machinery, and livestock equipment had the highest environmental impacts. The results showed that animal feed had the highest environmental emissions in all impact groups except for abiotic depletion of fossil fuels where electricity had the greatest effect. CRS model determined that 7 units were efficient; with an average efficiency of 0.78. In the BCC model, 20 production units were calculated as highly efficient,
Introduction
Prolonged droughts and lack of water resources, followed by the salinity of water and soil resources, have faced many limitations in the production of some conventional agricultural and garden plants, especially in arid and semi-arid regions of the country. Therefore, the introduction of new plants with high yield potential, which have suitable growth in saline soils, the threshold of their seed yield reduction is high, and the production product is of high quality has been considered in Iran. Quinoa with the scientific name Chenopodium quinoa Willd. It is an annual plant originating from Latin America, which, despite its high nutritional value, tolerates a wide range of abiotic stresses and can grow in marginal lands. For this reason, this experiment was conducted to investigate the performance of quinoa plant genotypes against different levels of salinity in the research field of the Gorgan Agricultural Meteorological Research Department.
Materials and Methods
Cultivation of seeds of nine genotypes Titicaca (control number), Giza1, RedCarina, Q18, Q21, Q22, Q26, Q29, and Q31 obtained from Karaj Seedling and Seed Breeding Research Institute in a factorial experiment based on a complete random block design. Plastic pots were made with a bed of sand and clay in a ratio of two to one on March 5, 2019. The application of NaCl salt solution treatments at the levels of zero, 10, 20, and 30 decisiemens/m started after the establishment of the plant and reached the six-leaf stage and lasted for 45 days. After salinity treatment, morphological traits including plant height, stem diameter, number of sub-branches, inflorescence length, inflorescence width, biomass, 1000 seed weight, and seed weight per plant were measured.
Introduction
Sunflower, one of the primary oilseed crops worldwide, is cultivated extensively due to its suitability for agricultural needs, high oil yield, and nutritional and medicinal value. However, drought remains the most critical limiting factor affecting sunflower productivity. In arid and semi-arid regions, the intensity of drought stress is predicted to increase in the future. Unfortunately, severe drought stress leads to significant reductions in both seed and oil production. While sunflower is moderately drought-tolerant, understanding the physiological and agronomic aspects of drought stress is crucial for sustainable management. Given that water, scarcity poses a significant threat to crop productivity and environmental resources are diminishing, effective irrigation management under water scarcity is becoming increasingly important.
Materials and Methods
In order to study the effects of deficit irrigation on grain yield and physiological traits of six sunflower cultivars, a field experiment was carried out in a split-plot arrangement based on randomized complete block design with three replications in 2019-2020 growing season. The experimental site was located in the research farm of the Safiabad Agricultural and Natural Resources Research and Education Center. Main plots consisted of three irrigation regimes including; control, moderate, and severe deficit irrigation (50, 70, and 90% of available moisture, respectively), and sub plots consisted of six sunflower cultivars including; Oscar, Felix, Shakira, Savana, Labad and Monaliza.
More Related Content
Similar to Improvement of Functional, Morphological, and Physiological Traits of Camelina (Camelina sativa) Using Iron Nanoparticle and Putrescine Sprying
Intensive agriculture, despite high production, has adverse environmental effects, mainly due to the use of pesticides and chemical fertilizers. Therefore, we need alternative agricultural systems that are more economically and environmentally sustainable to produce crops. One of the sustainable methods in the production of agricultural products is intercropping. Intercropping of two or more species in a plot of land can increase biodiversity and resource utilization as agricultural perspective, which in turn can lead to increased yield stability. Intercropping uses resources more efficiently than monoculture, preventing the growth and spread of weeds by shading and suffocating weeds, and in some cases with allelopathic. Intercropping of cereals and legumes is recommended for the development of sustainable food production systems, especially in planting systems based on reduced consumption of foreign inputs. The importance of these systems depends on the nitrogen stabilized by the legumes. The aim of this experiment was to study the effects of row intercropping of barley and vetch and different levels of ammonium nitrate fertilizer on weed biomass, yield components and yield of two species in Karaj climatic condition.
Introduction
Nowadays, the cultivation of plants adapted to adverse conditions, such as drought and salinity, in the country has been considered. Meanwhile, Kochia scoparia, one of the forgotten plants, due to its classification in the group of halophytes, has specific characteristics suitable for cultivation in low-water and saline areas (Salehi, Kafi, & Kiani, 2012). This plant is known as an important annual forage crop, and its grains also have high nutritional value and oil, which can be considered for future industrial applications (Salehi et al., 2012). Studies on the salinity tolerance of the Kochia plant have shown that it is suitable for cultivation in saline areas, and in terms of quantity and quality, can compete with conventional forage plants. The use of natural organic materials, such as humic acid, has received more attention. These materials, as part of soil organic matter, are influenced by physical, chemical, and microbiological changes in biological molecules (Sabzevari & Khazaei, 2009; Dong, Córdova-Kreylos, Yang, Yuan, & Scow, 2009). Additionally, nitrogen is the most important element needed for plant growth and development. It is also a key component in many biological compounds, including proteins, nucleic acids, some hormones, and chlorophyll. Nitrogen plays an essential role in photosynthetic processes and the final function of plants (Kaur, Gupta, & Kaur, 2002; Taiz, Zeiger, Møller, & Murphy, 2015). As a result of this research, a combination of nitrogen and humic acid can be used as nutritional resources in salt stress conditions.
Materials and Methods
This experiment was conducted in the form of split plots based on the randomized complete block design with three replications in the Saline Research Farm of Ferdowsi University of Mashhad in the 2015 growth season. The main plot included drought stress with a four-week interruption of irrigation at three levels of control (irrigation until the end of the growing season), after establishment (50 days after planting), the beginning of flowering (71 days after planting) and late flowering (82 days after planting) The subplot was included nitrogen application at three levels of zero, 100 and 200 kg.ha-1 from urea fertilizer source. The optimum level of humic acid (2 per thousand) was done as seed at the time of planting for all treatments.
Results and Discussion
The results showed that the drought stress during vegetative and reproductive growth stages had a negative effect on the Kochia plant. However, its effect in the early stages of vegetative growth (after establishment) was greater than the stress at the end of the season (late flowering). Drought stress has a negative effect on Kochia grain yield by reducing the concentration of chlorophyll a, altering the chlorophyll a to b ratio, decreasing carotenoid concentration, and affecting relative leaf water content. However, seed treatments of humic acid and its combination with 100 kg.ha-1 nitrogen level by increasing th
The excessive use of chemical fertilizers is a leading cause of environmental pollution in the agriculture sector. Therefore, optimizing fertilizer application is a crucial approach to boost production while minimizing environmental harm. On the other hand, application of chemical fertilizers along with manure can be considered as the proper management system that led to reduce the amount of chemical fertilizers and adverse effects on environment and also improve nutrition for plants. Response-surface methodology is a powerful tool to optimize production resources which decreases cost and time of the experiments by reducing number of them. Therefore, the aim of the study was optimization of chemical fertilizers of nitrogen and phosphorus along with manure application in fodder maize production.
The excessive use of chemical fertilizers is a leading cause of environmental pollution in the agriculture sector. Therefore, optimizing fertilizer application is a crucial approach to boost production while minimizing environmental harm. On the other hand, application of chemical fertilizers along with manure can be considered as the proper management system that led to reduce the amount of chemical fertilizers and adverse effects on environment and also improve nutrition for plants. Response-surface methodology is a powerful tool to optimize production resources which decreases cost and time of the experiments by reducing number of them. Therefore, the aim of the study was optimization of chemical fertilizers of nitrogen and phosphorus along with manure application in fodder maize production.
In recent decades, the need for increased food production has resulted in the expansion of intensified agriculture practices characterized by high consumption of inputs, thereby reducing agricultural sustainability. The agricultural sector's contribution to the world's energy consumption, ecological footprint, and greenhouse gas emissions has grown substantially. Emissions of greenhouse gases have negative ecological effects, including climate change, global warming, and diminished sustainable development. In this sector, energy analysis and greenhouse gas emissions in ecosystems are the most common methods for assessing sustainability. This study was conducted to evaluate the sustainability of canola agroecosystems by analyzing energy consumption, carbon footprint, and greenhouse gas emissions.
Nitrogen (N) is one of the main limiting factors in agroecosystems all around the world. However, high application rates of N fertilizers would lead to negative environmental consequences. Reduction of N fertilizers consumption decreases production costs and environmental pollution. Therefore, N efficiency to be enhanced due to the high N fertilizer cost and required measures to prevent the waste of N. Cultivation of diverse crop cultivars with higher resources absorption and utilization efficiency is one of the major approaches in sustainable agriculture that would result in the effective use of natural and chemical inputs and reduce significantly the environmental risks. Quchan City is one of the potato production poles in Khorasan Razavi province. In this region, large amounts of N fertilizers annually are consumed in the potato agroecosystem. Therefore, the potato of the present study was evaluating N uptake and utilization efficiency, and finally, N uses efficiency in the potato agroecosystem of Quchan.
Water is now the main limiting factor for crop production in arid and semi-arid regions. Water-cut or irrigation interruption has been suggested as one of the main strategies agro-technique to get the most benefit from limited water resource available. In this regard, plant growth stage, time of stress induction and the genotype are the main key factors to determine the degree of success. Canola is one of the most important oil crop. It can survive some degree of water stress while there is a need for research to find the most appropriate genotypes for plantations in water-limited areas.
Introduction
The striped bug, Graphosoma lineatum L. is one of the pests of Apiaceae family such as parsley, carrot, celery and some medicinally important plants. The adults and nymphs of this insect feed on seeds of host plants. The eggs of the striped bug have an important role in mass rearing program of some parasitoids. Nutritional supplements undertake an essential function in mass rearing of insects and increase the efficiency of production. Vitamins such as B group have different functions in physiology of insects. The growth and development of insects hinge on acquiring essential nutrients through food materials. Apart from their primary food source, insects rely on essential amino acids and certain minerals for proper nutrition. These crucial components must be obtained from their food sources. Symptoms of nutritional deficiency, as reported in various research studies, include delayed growth, weight loss, prolonged immature stages, increased mortality, wing deformities, alterations in mating behaviors, and various physiological issues. In this study the effects of some vitamins and amino acids on anatomy of salivary glands, total protein of body, developmental time and fecundity of G. lineatum were evaluated in controlled conditions.
Material and Methods
Insects reared on parsley seeds adhered on the inner side of big plastic containers in controlled condition. Supplements including vitamins B12, B6, B1 and Serine and Phenylalanine amino acids selected for evaluation. These supplements used for the treatmnet of G. lineatum in four different concentrations dissolved in water. For evaluating the effects of nutritional supplements on anatomy of salivary glands, both glands separate after dissection of adult’s thorax, and dimension of glands including width and length of posterior and anterior lobs, measured by micrometer apparatus located on stereomicroscope. Total body protein measured by Kjeldahl apparatus after well drying the total body of insects in oven followed by fine powder of dry materials. Total protein was determined using a standard method, calculated by multiplying the nitrogen amounts by 6.38, a constant value. In distinct experiments, the impact of nutritional supplements on the duration of each nymphal stage was investigated. One-day-old eggs were employed for this purpose. Following treatment justification, the time required for the development of each instar was recorded on a daily basis. All tests were replicated three times, with distilled water used for the control treatment. The data were analyzed by One-way ANOVA experimental randomized design and Duncan’s multiple range test using SAS software used for comparing the means.
Results and Discussion
The results disclosed a significant impact of all vitamins and amino acids on all studied parameters. Notably, in the case of salivary glands, the posterior lobe exhibited a more pronounced effect in insects fed with B1, B6, and Phenylalanine. Different concentrations of
South of Iran has been located in the dry belt and desert strip thus water stress has always been one of the serious problems in its agriculture (Buzarjomehri et al., 2020). Intercropping is the cultivation of two or more plant species in a specific land and growing season, which is important in agricultural systems with limited resources and low input (Brooker et al., 2015). Due to the differences in the rooting depth, lateral expansion, and root density of cereals and legumes, they have been the best candidates for intercropping traditionally for limited soil water and nutrient availability environments (Babalola, 1980; Haynes, 1980). Application of bio-fertilizers (PGPR bacteria) that have nitrogen (N) fixation and phosphorus (P) solubilizing activity (Azospirillum brasilense and Pseudomonas fluorescence, respectively) is a promising approach for obtaining N, P, and water-restricted areas (Tien et al, 1979; Barea, 2015). Organic manures enhance soil water holding capacity and serve as excellent slow-release sources of nitrogen (N) and phosphorus (P) in the soil (Risse et al., 2006). This study aimed to investigate the effect of different fertilizer systems (chemical, integrated, and bio-organic) on triticale grain yield and its components in sole and intercropped triticale in triticale/chickpea system under late season water stress in a hot and dry area of southern Iran (Fars province - Darab).
Maize (Zea mays L.) is one of the most important cereals after wheat and rice in the tropical and temperate regions of the world. Also, its mean production is 8 ton ha-1. Moreover, the total area of under cultivation is 132572 hectares in Iran. Crop simulation models can play an important role in improving agricultural production systems in many developing countries. Crop models can simulate plant growth processes and grain yield instead of conducting several years of field experiments. On the other hands, crop simulation models should be calibrated and evaluated with independent data sets under different climatic conditions. Therefore, the purpose of this research was evaluation of the APSIM model for simulation of growth, development and yield of maize hybrids in Kerman province under different amounts of nitrogen.
Since the development of crop cultivation and their yield depend on irrigation and since drought is one of the features of our country, one of the solutions to deal with these problems is the implementation of applied research in the field of stress-resistant plants cultivation such as quinoa. Also, considering the important role of potassium and zinc elements in the plant, providing a sufficient amount of these elements under drought stress can be effective in increasing the plant's resistance to this type of stress. Considering the genetic differences of plants and their different reactions in the face of environmental stress such as drought stress, and different fertilization of genotypes, it seems necessary to carry out this research to investigate the application of potassium and zinc chelates on the morpho-physiological and yield indicators of three quinoa genotypes under drought stress conditions in Razavi Khorasan climate.
Fennel is a cross-pollinating plant and one of the most important medicinal plants of the Apiaceae family, whose essential oil is widely used in various pharmaceutical, food, and cosmetic industries. Fennel originated from the Mediterranean region and is a biennial or perennial species. Fennel essential oil has been demonstrated to have antioxidant, anti-cancer, antibacterial, antifungal, and analgesic effects. Improving yield is one of the important goals of breeding, and the use of heterosis as one of the powerful tools to improve yield has always been of interest to breeders. This study was conducted to evaluate seed yield and yield components of three synthetic cultivars of fennel and compere with eight parental populations.
There is an urgent need to increase per capita food production to compete with high population growth while maintaining environmental sustainability. Because nitrogen plays a vital role in food production for humans and livestock, nitrogen management is essential in food production. In most cropping systems, nitrogen management seems to be a major challenge due to its high mobility and natural tendency for losses from the soil-plant system to the environment. Soil organic carbon plays a key role in improving soil ecological conditions. Adding organic matter to the soil is an excellent tool for improving physical, chemical and biological conditions and is almost always desirable. Soil organic carbon stock of crop ecosystems may be increased by improving farming practices. The application of green manure, fertilizer and the return of crop straw into the soil are known as management operations to increase soil organic carbon. Fertilizers, especially nitrogen, increase crop yield, and organic carbon is returned to the soil through roots and debris, which in most cases leads to increased soil organic carbon.
Introduction
Ultrafiltration is one of the most common membrane processes in the dairy industry, especially for condensing and separating milk components. Using this process, several products can be produced, including milk concentrate used for cheese production, low-lactose dairy products, milk protein concentrate, and serum proteins for dietary supplements. The efficiency and cost of a membrane process depend on the percentage of rejection of the soluble components. Therefore, the use of concentrated milk made by ultrafiltration in the production of various dairy products depends on the efficiency of the membrane process and the changes in milk components during this process. On the one hand, the physicochemical properties of camel milk are different from those of cow milk, especially in terms of type and amount of protein. Because significant differences exist between the physicochemical properties of camel and cow milk, likely, the membrane processing conditions and the physicochemical properties of their products will be different completely. Although many studies have been conducted on the efficacy of the ultrafiltration processing of cow milk, there is no information about the efficacy of camel milk ultrafiltration, and most of the research done regarding optimizing is based on classical algorithms, Therefore, in this study, the effects of transmembrane pressure and temperature on the solutes rejection (protein, lactose, ash, and total solids) during camel milk ultrafiltration process were investigated, Then, these properties were optimized using particle swarm algorithm. Also, because the performance of the particle swarm algorithm is highly dependent on related parameters such as the number of iterations, the number of particles, accelerate constant, inertia weight, and velocity of the particles, so before optimization, the effect of these parameters on optimal responses were examined by partial least squares regression (PLS).
Materials and Methods
In this study, a pilot crossflow ultrafiltration system was used. A UF membrane (Model 3838 HFK-131, Koch membrane systems, Inc., USA) made of polysulfone amid (PSA) with MWCO of 20 kDa was applied. Camel milk was purchased from a local market in Mashhad and for camel skim milk production, its fat was separated by a pilot plant milk fat separator in the Food Research Complex, Ferdowsi University of Mashhad. The weight percentages of protein, fat, lactose, ash, and total solids of UF permeate samples were measured by ISO 8968-1:2014, ISO 1211: 2010, ISO 26462/IDF 214:2010, ISO 5544:2008, and ISO 6731:2010 at two replications, respectively. the process treatments were performed in the form of a central composite design (CCD) (5 replications at the central point) for two independent variables at three levels so that the total number of 13 treatments was obtained. The data were modeled using the statistical software of Design Expert (version 11) based on the response surface methodology and eac
Introduction
The increase in people's awareness of the negative effects of chemical preservatives has led to more research on the antimicrobial effect of plant essential oils and their potential to be used as preservative compounds. Strawberry (Fragaria ananassa cv. qingxiang) is one of the most popular and widely consumed berries due to its taste, sweetness and healthy function. The taste of strawberry is related to its hardness, viscosity, sugars, protein, total soluble solid, titratable acidity content and minerals like P, K, Ca and Fe. It is a good source of polyphenolic compounds such as flavanols and has antioxidant activity. This, together with higher vitamin C content in strawberries, contributes beneficial effects on the maintenance of consumer health. Strawberry has higher antioxidant activities than orange, grape, banana, apple, etc. Strawberries are among the fruits sensitive to mechanical and physiological damage and have a fast metabolism and deterioration during the storage period. For this reason, it is necessary to use safe methods to control spoilage and maintain the quality of strawberry fruit during storage.
Materials and Methods
The experiment was conducted in a completely randomized design, in a 5 x 4 factorial scheme (5 treatments x 4 periods evaluated), with four replications The first variable was the type of material with different concentrations in five levels including 0, 0.3%, 0.6% carvacrol, the combination of chitosan with 0.3% and 0.6% carvacrol, and the second variable was storage time in four periods including 0, 10, 20, 30 days of storage. The harvested fruits were kept at 4°C and with a relative humidity of 90±5% and parameters such as weight loss, pH, firmness of the fruit tissue, acidity (TA), soluble solids (TSS) and taste index, vitamin C, phenol and flavonoid, fruit shelf life (number of days) during the storage period were investigated and studied.
Results and Discussion
The ANOVA results showed that the effect of the type of treatment and storage time on all investigated traits except for the firmness of the fruit texture was significant at the probability level of 1%. The fruits treated with the combination of chitosan and carvacrol 0.6% had more texture firmness, vitamin C, total phenol content and the amount of soluble solids and better shelf life than the control. In all four storage times, the highest content of total phenol (2.49 mg of gallic acid per 100 gr FW), total flavonoid (0.435 mg of Quercetin per 100 gr FW) and firmness (3.80 N) was related to the combined treatment of chitosan with carvacrol 0.6% and the lowest amount was related to the control. The firmness of the fruit tissue gradually decreased during storage, but this process was observed at a significantly slower rate in the treated fruits.
Conclusion
Considering the increase of 10 and 12 days of shelf life post- harvest of the combined treatment of chitosan + 0.6% carvacrol compared to other treatments and the control, henc
Introduction
In conventional formulations such as emulsifiable concentrates (EC), wettable powders, soluble liquids, etc., complete availability of the active agent is usually considered immediate or rapid following usage. Application rates of these formulations of pesticides are greater than the minimum threshold concentration to counter losses from sorption, volatilization, photodecomposition, microbial and chemical degradation, and leaching. Controlled-release technology for pesticides could reduce environmental damage and increase efficiency by enhancement of delivery to the site of action. This survey was conducted to determine the possibility of EPTC and trifluralin efficiency improvement by using microencapsulated formulation (MC) that were first synthesized in Iran.
Materials and Methods
Two separated greenhouse experiments were conducted in Tirtash Research and Education Center (Mazandaran–Iran) in 2014. The experiments were carried out in a factorial arrangement based on a randomized complete block design with three replications. The Microencapsulated formulation of EPTC and trifluralin herbicides were compared with emulsifiable concentrate formulation (Eradicane 82% and Treflan 48%) in 0 (control), 25, 50, 75 and 100 percent of active ingredient (a.i.) (4.92 and 1.2 kg a.i./ha, recommended doses for EPTC and trifluralin, respectively). For this purpose, the soil of pots were infested with the seed of Green foxtail (Setaria viridis) and Redroot pigweed (Amaranthus retroflaxus). The responses of weeds to treatments, specifically seedling number, were analyzed using ANOVA tests, non-linear regression, and fitting to three parameters of Weibull and log-logistic equations. This analysis was based on Akaike's Information Criterion, Residual Standard Error, and Lack-of-Fit Test indices in the R3.4.1 program. The effective dose were determined for 10, 50 and 90 percent of weed control (ED10, ED50 and ED90, respectively). Relative potency index (R) of formulation types were determined by divided ED50 of EC into MC formulations.
Results and Discussion
According to the results of the experiments, the formulation type had a significant effect on the weed numbers. The MC formulations of EPTC increased Green foxtail and Redroot pigweed control efficiencies. The ED10, ED50 and ED90 decreased from 0.72, 2.94 and 7.18 kg a.i.ha-1 in the EC to 0.41, 1.87 and 4.89 kg a.i.ha-1 in the MC formulation for Green foxtail and 1.08, 3.29 and 10.02 kg a.i.ha-1 in the EC to 0.57, 2.36 and 9.67 kg a.i.ha-1 in the MC formulation for Redroot pigweed. The R index of EPTC in Green foxtail and Redroot pigweed control were 1.57 and 1.39, respectively. Weed control increased as trifluralin dosage increased in both of the formulation types, although in higher doses of the MC, weed control efficiency increased more than the EC formulation. So the efficiency of the MC formulations depended on application dosages. The ED10, ED50 and ED90 of Green foxtail were 0.14, 0.55 an
Introduction
Today, carrots are widely used in freshly cut products, including ready to eat salads, however, its shelf life is reduced due to the damage caused on the texture of the product which accelerate the reduction of nutritional value as well as the growth of microorganisms, (Azizian et al., 2020). To increase the shelf life of freshly cut products, it is recommended to use coatings on the surface of these products. Alginate is a hydrophilic biopolymer and having unique colloidal characteristics, it demonstrates a suitable coating function. Olivas et al. (2008) showed that by coating fresh apple slices with alginate and antimicrobial agents increased the shelf life of apple and decreased weight loss. Among the native plants of Iran, we can mention the Oliveria plant, which belongs to the Amblifra family. The aerial parts of this plant have a significant amount of essential oils (EOs). Researches by Amin et al. (2005) on the antimicrobial properties of Oliveria essential oils have shown a broad-spectrum antimicrobial activity against all studied organisms, and this effect is comparable to that of commercial antibiotics. Packaging with modified atmosphere is one of the best ways to increase the shelf life of fruits and vegetables. The purpose of this study was to investigate the effect of alginate and Oliveria essential oils on the physicochemical and microbial characteristics of grated carrots in polypropylene packages with modified atmosphere during storage.
Methods
Essential oil of Oliveria plant was extracted, dehydrated by sodium sulfate and placed in sealed glass container and stored at 4˚C until using. Carrots prepared from Wilmoren cultivar. An industrial crusher crushed the carrots, and samples were coated by treatment solutions. Two treatments of coating were prepared, one as control with 0% and the other one with 1.5% alginate with stirring and moderate heat (50-60°C) (Lu et al., 2009). Then the Oliveria EO was added to the alginate solution at the specified concentration. The resulting solution was deaerated at 25˚C.
T1: control sample (without coating)
T2: 1.5% alginate
T3: 150 ppm Olivieria EO
T4: 250 ppm Olivieria EO
T5: 1.5% alginate and 150 ppm of Olivieria EO
T6: 1.5% alginate and 250 ppm of Olivieria EO
After weighing (250 g), the grated carrots (control and coated) were placed in 10 g polypropylene packages of suitable food grade in dimensions of 50 × 190 × 144 cm and the package was injected with 5% O2, 5% CO2 and 90% N2. The packages were then stored in the refrigerator for 12 days at 4±1˚C. All experiments were performed on days 1, 3, 6, 9, and 12.
Evaluation of Chemical, Microbial and Sensory Characteristics
A pH meter used for pH determination (Rad et al., 2020). The acidity measured based on Rocha et al. (2007) method.
The weight was reported using pre and post-storage weight. The carotenoid concentration calculated by Rocha et al. (2007) method. Total soluble solids determined by refractometer (Rad et al., 20
The increasing demand for medicinal plants in traditional medicine as well as the pharmaceutical industry has created the need for some plants to be grown commercially, but the lack of soil moisture poses a serious threat to their production. Planting method can affect the emergence and growth rate of crop and lead to decrease water consumption and increase irrigation water efficiency as yield increases. Roselle (Hibiscus sabdariffa L.) is one of the drought tolerant plants. Saving water consumption by cultivating drought tolerant plants has been proposed as a strategy to combat drought. It should be noted, however, that irrigation without proper planning can reduce the growth and production of crops. In this regard, determining time of deficit irrigation with minimum damage is an appropriate solution that achieves optimum yield while saving water consumption. The aim of this study was to investigate the effect of different irrigation regimes and planting method on some physiological traits, yield and water use efficiency of Roselle plant.
The development process of organic cultivation in Iran is not favorable because the average growth rate of organic agriculture development from 2008 to 2019 according to FAO statistics in 2021 is equal to -0.47% and this is while foods contaminated with various substances Chemicals have an unpleasant effect on the general health of society. According to the statistics of 2021, 600 million people in the world, i.e. 1 out of every 10 people, will get sick after eating food. Since any change in the use of chemicals in agriculture should be based on the behavior of farmers, the purpose of this study is to investigate the behavioral intention to produce organic pistachio production among 5200 pistachio growers in Ardakan county, Yazd province, using the Decomposed Theory of Planned Behavior (DTPB) analysis.
Evaluation and Optimization of Energy and Environmental Indicators Using Life...J. Agricultural Machinery
Introduction: Environmental crises and resource depletion have adversely affected environmental resources and food security in the world. Therefore, with the global population growth in the coming years and the rising need to produce more food, attention must be given to environmental issues, energy consumption, and sustainable production. The purpose of this study is to evaluate the pattern of energy consumption, environmental impacts, and optimization of the studied energy indicators in dairy cattle breeding industrial units in Khuzestan province, Iran.
Materials and Methods: This research was conducted in Khuzestan province, located in the southwest of Iran. Energy indicators including energy ratio, energy efficiency, specific energy, and net energy were used to determine and analyze the relationships between the output and input energy. Additionally, the life cycle assessment methodology was used to assess the environmental impact. Life cycle assessment includes a goal statement, identification of inputs and outputs, and a system for assessing and interpreting environmental impacts, and can be a good indicator for assessing environmental issues related to production. The life cycle assessment method used in this study was CML-IA baseline V3.05, which includes the four steps of (1) selecting and classifying impact categories, (2) characterizing effects, (3) normalizing, and (4) weighting. Overall, 11 impact groups were studied. The Data Envelopment Analysis (DEA) method with the Anderson-Peterson model was used for optimization. This method identifies the most efficient production unit and makes it possible to rank all of the farms in the region. In this study, each production unit (farm) was considered a decision-making unit (DMU), and its production efficiency was determined based on two models. Namely, the Charnes, Cooper, and Rhodes (CCR) model also known as Constant Return to Scale (CRS), and the Banker, Charnes, and Cooper (BCC) model also known as Variable Return to Scale (VRS).
Results and Discussion: The results showed that the input and output energies per cow per day were 173.34 and 166 MJ, respectively. Livestock feed and electricity accounted for 65.47% and 27.2% of the input energy, respectively, while the oil used for tiller-scraper lubrication of fertilizer collection accounted for only 0.01%, making it the lowest input energy. Energy efficiency, specific energy, and net energy were calculated as 0.95, 0.13 kg MJ-1, 7.51 MJ kg-1, and -7.20 MJ per cow, respectively. In the abiotic depletion impact group, animal feed, machinery, and livestock equipment had the highest environmental impacts. The results showed that animal feed had the highest environmental emissions in all impact groups except for abiotic depletion of fossil fuels where electricity had the greatest effect. CRS model determined that 7 units were efficient; with an average efficiency of 0.78. In the BCC model, 20 production units were calculated as highly efficient,
Similar to Improvement of Functional, Morphological, and Physiological Traits of Camelina (Camelina sativa) Using Iron Nanoparticle and Putrescine Sprying (20)
Introduction
Prolonged droughts and lack of water resources, followed by the salinity of water and soil resources, have faced many limitations in the production of some conventional agricultural and garden plants, especially in arid and semi-arid regions of the country. Therefore, the introduction of new plants with high yield potential, which have suitable growth in saline soils, the threshold of their seed yield reduction is high, and the production product is of high quality has been considered in Iran. Quinoa with the scientific name Chenopodium quinoa Willd. It is an annual plant originating from Latin America, which, despite its high nutritional value, tolerates a wide range of abiotic stresses and can grow in marginal lands. For this reason, this experiment was conducted to investigate the performance of quinoa plant genotypes against different levels of salinity in the research field of the Gorgan Agricultural Meteorological Research Department.
Materials and Methods
Cultivation of seeds of nine genotypes Titicaca (control number), Giza1, RedCarina, Q18, Q21, Q22, Q26, Q29, and Q31 obtained from Karaj Seedling and Seed Breeding Research Institute in a factorial experiment based on a complete random block design. Plastic pots were made with a bed of sand and clay in a ratio of two to one on March 5, 2019. The application of NaCl salt solution treatments at the levels of zero, 10, 20, and 30 decisiemens/m started after the establishment of the plant and reached the six-leaf stage and lasted for 45 days. After salinity treatment, morphological traits including plant height, stem diameter, number of sub-branches, inflorescence length, inflorescence width, biomass, 1000 seed weight, and seed weight per plant were measured.
Introduction
Sunflower, one of the primary oilseed crops worldwide, is cultivated extensively due to its suitability for agricultural needs, high oil yield, and nutritional and medicinal value. However, drought remains the most critical limiting factor affecting sunflower productivity. In arid and semi-arid regions, the intensity of drought stress is predicted to increase in the future. Unfortunately, severe drought stress leads to significant reductions in both seed and oil production. While sunflower is moderately drought-tolerant, understanding the physiological and agronomic aspects of drought stress is crucial for sustainable management. Given that water, scarcity poses a significant threat to crop productivity and environmental resources are diminishing, effective irrigation management under water scarcity is becoming increasingly important.
Materials and Methods
In order to study the effects of deficit irrigation on grain yield and physiological traits of six sunflower cultivars, a field experiment was carried out in a split-plot arrangement based on randomized complete block design with three replications in 2019-2020 growing season. The experimental site was located in the research farm of the Safiabad Agricultural and Natural Resources Research and Education Center. Main plots consisted of three irrigation regimes including; control, moderate, and severe deficit irrigation (50, 70, and 90% of available moisture, respectively), and sub plots consisted of six sunflower cultivars including; Oscar, Felix, Shakira, Savana, Labad and Monaliza.
Deficit irrigation offers a solution for optimizing crop production under water stress conditions, albeit with an initial reduction in yield per unit area. Employing deficit irrigation aids in farm management in scenarios where land availability isn’t constrained, enabling the determination of optimal cultivation patterns while conserving water consumption. However, deficit irrigation may influence plant growth and development by inducing drought stress. Due to several capabilities, quinoa shows resistance to solar radiation, temperature, water availability, and atmospheric CO2 concentration, which makes it possible to cultivate it in different agricultural areas. Quinoa also has a great capacity for cultivation in dry and low-water soils. Although growth analysis sometimes provides valuable clues, it does not provide any physicochemical information related to the environmental reactions of plants; in other words, the main benefit of many quantities involved in growth analysis is to provide an accurate estimate of the ability and efficiency of the plant in the community at certain time intervals. In general, growth analysis evaluates the system based on the results of physiological manifestations. The purpose of this research was to evaluate the physiological growth analyses of three quinoa cultivars under different moisture levels in summer and spring planting dates in the South Khorasan region.
Agriculture is a cornerstone of many developing economies, providing food, income, and employment for millions of people. It is also projected to play a vital role in feeding a global population of 9.1 billion people by 2050. However, there are growing concerns about the environmental impact of agriculture, particularly in arid and semi-arid regions like Iran. Managing water and fertilizer usage in agriculture is crucial to ensuring food security and sustainability. However, conducting field experiments to assess the interaction of all factors involved is expensive and time-consuming. This research focuses on optimizing maize production in Kerman province, a region where maize is a major crop. The research is motivated by the need to improve resource management in Iran, where water and fertilizer resources are limited. The APSIM model is used to determine the best management scenario for maize production in Kerman province. APSIM is a crop growth simulation model that can be used to predict the impact of different management practices on crop yield, water use efficiency, and nutrient use efficiency. The use of APSIM in this research provides a cost-effective and time-efficient alternative to conducting extensive field experiments. The results of this research will contribute to the development of sustainable and efficient agricultural practices in Kerman province and similar regions. These regions are characterized by resource constraints, such as limited water and fertilizer availability. The research aimed to simulate the effect of management parameters (planting date and irrigation) on Crop yield and subsequently achieve the optimal management scenario.
Chickpea (Cicer arietinum L.) is one of the most important crops in the human food basket worldwide. It is a highly nutritious pulse crop with low digestible carbohydrates, protein, essential fats, fiber, and a range of minerals and vitamins. As the human population grows, the demand for this protein source increases and various approaches to its sustainable products are being developed. Autumn cultivation of chickpea in cold regions requires the introduction of cultivars tolerant to freezing stress. The ability of plants to overwinter depends on the biochemical and physiological responses induced by their cold acclimation duration. Cold acclimation mechanisms in the plant are a fundamental reason for plant tolerance increase in autumn cultivation. Hence, investigating the mentioned traits can help identify cold-tolerant genotypes. Identifying attributes that provide a suitable description of the diversity between genotypes is critical through canonical correlation analysis, cluster analysis, and determining the genetic distance.
Crop cultivars are the most important factor in crop optimum quantity and quality products achievement and cotton is one of the most industrial crops. Objectives of new cotton cultivars introduction are yield increase, earliness, and resistance to biotic and abiotic stresses. Despite the improvement and introduction of numerous new cotton cultivars in Iran in recent years, new foreign cotton cultivars have also been registered, introduced, and commercialized for the first time in Iran. Therefore, the cultivation of new foreign cotton cultivars that show early maturity, high-yielding, and have good fiber quality is included in projects of the Ministry of Jihad of Agriculture for cotton cultivation development. This research was carried out to evaluate and compare the seed cotton yield and its components and some fiber qualitative characteristics of new cotton with thought VCU trial in South Khorasaد province in Birjand Mohammadieh agriculture research station to introduce and commercialize these cultivars.
Global warming directly affects agricultural production and food security (Ainsworth & Ort, 2010). Temperature controls the rate of plant metabolic processes that ultimately affect biomass production and grain yield (Hay & Walker, 1981). Although farmers are not able to control the climatic conditions, management and changes in factors such as irrigation, soil, crop varieties, activities, and technologies used in the cultivation of crops can reduce the harmful effects of climate change (Moradi et al., 2014). One of the reliable approaches to studying the effects of climate change on agricultural production is using crop growth models. The present study was conducted to simulate the effects of climate change on phonological stages and yield of maize and to investigate the possibility of mitigating the negative effects of climate change on maize by changing the sowing date and selecting suitable cultivars as management strategies for adaptation to climate change in Kermanshah region.
Wheat (Triticum aestivum L.) is one of the most important crops in the world as well as in Iran. It has experienced many improvements in terms of yield and quality traits during recent decades. Wheat, like energy, is known as a strategic commodity and is one of the important indicators of agriculture. This plant has the highest area under cultivation and production among other cereals in the world. Planting date is an important factor in crop production because meteorological parameters vary with changes in planting date. Delay in planting is one of the problems that is common in almost all wheat growing areas of Iran and is one of the main causes of reduced yields of wheat cultivars. Yield reduction rate varies depending on the delay in planting and cultivars, and the results of some experiments indicate that this amount sometimes reaches more than 35% of potential grain yield. Phenology and growth rate due to their effect on duration and the occurrence of different stages of development and the environmental conditions prevailing in each of these stages, are the key point of adaptation to various environmental conditions such as delayed planting date. This experiment was designed to identify the changes in yield and yield components and phenological stages of new bread wheat cultivars with different growth habits and to investigate the possibility of introducing cultivars compatible with delayed planting date in the region.
Sugar beet (Beta vulgaris L.) is the second most important sugar crop after sugarcane, which annually produces about 40% of total sugar production worldwide and is adapted to different climatic conditions (El-Hag et al., 2015). Due to global warming, autumn cultivation of sugar beet is predicted to become more priority in the future, but autumn cultivation is in danger of bolting and flowering in many areas. Excessive bolting reduces sugar content, root yield, and purity of raw syrup. In general, both early sowing and delayed sowing reduce root yield, sugar, and leaf area index and increase the percentage of impurities. Therefore, this experiment was designed and implemented with the aim of feasibility study of autumn cultivation of sugar beet and determination of the best planting date in North, Razavi, and South Khorasan provinces for three new varieties resistant to sugar beet.
The quantity and quality of forage plants are beneficial and useful due to their role in animal husbandry, reproduction and other livestock products. Due to the limitation of water resources, water-deficit as a significant biotic stress is the most severe threat to world food security and is responsible for many yield losses. Plants constantly modify their physiological processes in response to various biotic and abiotic stress to regulate the balance between plant growth and defense response. Many researchers have documented that plant nutrients are involved in biological processes of plants. It has been stated that the use of silicon by increasing the ability to absorb water can be useful to improve drought tolerance of sorghum, sorghum can with the help of silicon extract more water from dry soil and maintain more stomatal conductance.
Drought stress and consequent lack of available water for plants is one of the main causes of accumulation of reactive oxygen species (ROS) in various organs of plants, which is effective in reducing the yield of cereals such as wheat. The antioxidant system, which contains various enzymes and genes, is responsible for removing and detoxifying plants from ROS. Unfortunately, genes responding to drought stress and their enzymatic activities associated with spike and flag leaf of wheat have received less attention. Therefore, in the present study, photosynthetic parameters, key enzymes of the antioxidant system, and expression analysis of some genes involved in this system under field capacity (FC) and drought stress (DS) conditions in spike and flag leaves of wheat were investigated.
Climate change is rapidly degrading the conditions of crop production. For instance, increasing salinization and aridity is forecasted to increase in most parts of the world. As a consequence, new stress-tolerant species and genotypes must be identified and used for future agriculture. Stress-tolerant species exist but are actually underutilized and neglected. Quinoa, scientifically known as Chenopodium quinoa Willd. is a member of the Amaranthaceae family. Promoting the cultivation and nutrition of quinoa will diversify food products in the country, sustainable production, increase farmers' incomes and provide part of the community's food needs. Crop simulation models have been used for various studies such as selecting the appropriate cultivar, determining the best planting date, predicting the effect of diversity and climate change on growth. Field research requires a lot of time and money, while computer simulation models can save time and money by conducting extensive experimental simulations.
Quinoa is a dicotyledonous plant from the Amaranthaceae family, with favorable nutritional value and a high potential for growth and production in adverse environmental conditions. Despite being three carbon, it has high water consumption efficiency and as a new crop, due to its wide adaptation to different environment conditions such as salinity and drought, as well as being premature, it is suitable for planting in arid and desert areas and has many factors. Genetic and environmental factors such as genotype, density, arrangement and planting date, soil salinity, and drought stress affect yield. Among these, drought is one of the most important non-living stresses that cause great damage to crops and horticulture in the world every year. And especially Iran, which is considered an arid and semi-arid country. The effect of moisture stress on plants varies depending on which stage of plant growth occurs and plants can work through various mechanisms such as reducing growth parameters, closing pores, reducing photosynthesis, changing regulatory mechanisms of ion transport, and increasing activity. Antioxidant enzymes cope with drought stress to some extent, although such mechanisms are energy-intensive and cause a decline in performance.
Cumin is one of the most important medicinal plants in Iran and is widely used in food, health and beauty industries due to its antioxidant and antibacterial properties. Yield of some crops are higher in autumn planting compared to spring. However, low temperature and inappropriate distribution of precipitation are of factors affecting seedling emergence and establishment. So it seems that seeds with higher germination also have better emergence and establishment producing more vigorous seedlings in further growth stages. So, to success in autumn-planting of cumin, it is necessary to have ecotypes with appropriate and even emergence in low temperature and water restricted conditions. Since water is of high paramount importance in germination and lower water potentials lead to lower accessibility of water to seeds, the aim of this experiment was to study seed germination response of different cumin ecotypes to low water potentials.
For optimal production and maintaining its stability, environmental and weather conditions must be determined from the perspective of capabilities and limitations. For this purpose, it requires reliable regional data such as planting date, ripening time, plant density, soil, and meteorological information, which are generally not available for most regions. Obtaining this information is very time-consuming and expensive in many areas and is often simply not possible. Therefore, zoning can facilitate access to this information on a large scale. In other words, if the regions that are similar in terms of climate, soil, and management conditions are identified, the time and cost needed to collect information on a wide scale will be minimal.
2. 404
جلد ،ایران زراعی پژوهشهای نشریه
12
شماره ،
4
،
زمستان
2411
4.38 mg.g-1
, respectively) were observed in application of 60 ppm iron nanoparticles and 1.5 mM putrescine
which had no statistically significant difference with the concentration of 40 ppm iron nanoparticles and 1 mM
putrescine. The results indicated that the highest amount of flavonoid (40.72 mg.g-1
), soluble sugar (139.27
mg.g-1
), and plant height (115.75 cm) were observed in the treatment combination of 60 ppm iron and 1 mM
putrescine, the highest percentage of oil (41.76) and protein (27.77) were observed in the treatment combination
of 40 ppm iron and 1.5 mM putrescine and the highest amount of grain yield (210.27 g) and morphological
components of yield were observed in the treatment combination of 40 ppm iron and 1 mM putrescine. The
correlation result showed that there were the most positive and significant correlation values among the
physiological traits and the yield trait had a positive and significant correlation with plant dry weight (0.44) and
oil percentage (0.40).
Conclusion
The results have demonstrated that foliar application of 40 ppm iron nanoparticles and 1.5 mM putrescine
significantly enhanced various growth characteristics, including photosynthetic pigment content, crude protein,
oil content, as well as the physiological and morphological aspects of Camelina. Additionally, the application of
iron nanoparticles and putrescine via a uniform supply of low-consumption nutrients has been shown to
strengthen the plant's defense system, ultimately leading to improvements in the growth, development, and yield
of the medicinal-oil Camelina plant.
Keywords: Correlation, Oilseed, Pigment, Microelement, Stimulant