The document discusses the history and role of the Institute of Electrical and Electronics Engineers (IEEE). It describes how IEEE was formed through the merging of earlier organizations and how it is now the largest technical professional organization dedicated to advancing technology for humanity. IEEE develops a wide range of standards for various industries and technologies, including over 900 active standards, and holds hundreds of conferences annually.

2. Presented by:
BISMA SAJID
COMSATS Institute of Information Technology
Wah Campus

3.  Technology standards ensure that products and services
perform as intended
 It spells out a specific set of requirements for an item,
material, component or system.
 For interoperability
 Create uniform design, installation and testing methods
 Serve as ‘World’s
Common language’
Bisma Sajid-CIIT wah campus

4. AIEE (1884) – American Institute of
Electrical Engineers
 Founded by American industrialists to
develop a skilled workforce; prepare
standards for U.S. electrical industries
IRE (1912) – Institute of Radio Engineers
 Founded by radio electronics pioneers
IEEE (1963) - Institute of Electrical and
Electronics Engineers from AIEE & IRE
Bisma Sajid-CIIT wah campus

5.  Abbreviation of Institute of Electrical
and Electronics Engineers, pronounced I-
triple-E
 IEEE is the world’s largest professional
association for engineering dedicated to
advancing technological innovation and
excellence for the benefit of humanity
Bisma Sajid-CIIT wah campus

6.  Produces 30% of the world’s literature in
electrical and electronic engineering and
computer science field.
 Sponsors more than 300 international
technical conferences each year.
 Publishes extensive range of peer-review
journals.
 Major international standards body with
nearly 900 active standards and 700 under-
development.
Bisma Sajid-CIIT wah campus

7. Grouped into geographic areas reflecting where we
live and work.
 10 Geographic Regions
 324 Sections within Regions
 2,600 Student Branches
Bisma Sajid-CIIT wah campus

8. Bisma Sajid-CIIT wah campus

9.  38 Societies and 6 Technical Councils
 Purpose
 Bringing members together with similar
technical interests
 Sponsoring conferences, workshops
tutorials, seminars, etc.
 Developing publications: Journals,
Magazines, Newsletters
 Recognizing member accomplishments
Bisma Sajid-CIIT wah campus

10. Aerospace & Electronic Systems
Antennas & Propagation
Broadcast Technology
Circuits & Systems
Communications
Components, Packaging &
Manufacturing Technology
Computational Intelligence
Computer
Consumer Electronics
Control Systems
Dielectrics & Electrical Insulation
Education
Electromagnetic Compatibility
Electron Devices
Engineering in Medicine & Biology
Geosciences & Remote Sensing
Industrial Electronics
Industry Applications
Vehicular Technology
Information Theory
Instrumentation & Measurement
Intelligent Transportation Systems
Lasers & Electro-Optics
Magnetics
Microwave Theory & Techniques
Nuclear & Plasma Sciences
Oceanic Engineering
Power Electronics
Power Engineering
Product Safety Engineering
Professional Communication
Reliability
Robotics & Automation
Signal Processing
Social Implications of Tech.
Solid-State Circuits
Systems, Man, & Cybernetics
Ultrasonic, Ferroelectrics &
Frequency Control
Bisma Sajid-CIIT wah campus

11. Bisma Sajid-CIIT wah campus

12. IEEE standards affect a wide range of industries
including:
 power and energy
 biomedical and healthcare
 Information Technology
 Telecommunications
 Transportation
 Nanotechnology etc
Bisma Sajid-CIIT wah campus

13.  IEEE is best known for
developing standards for the computer and
electronics industry. In particular, the IEEE
802 standards for local-area networks
(LANs) are widely followed.
Bisma Sajid-CIIT wah campus

14.  IEEE 802 refers to a family of IEEE standards
dealing with local area networks and
metropolitan area network.
 IEEE 802 splits the OSI Data Link Layer into
two sub-layers:
 LLC(logical link control) sub layer
 MAC(media access control) sub layer
Bisma Sajid-CIIT wah campus

15. Bisma Sajid-CIIT wah campus

16. IEEE 802.1 (networking) and Network Management
IEEE 802.2 Logical link control (upper part of data
link layer)
IEEE 802.3 Ethernet (CSMA/CD)
IEEE 802.4 Token bus (disbanded)
IEEE 802.5 Defines the MAC layer for a Token Ring
(inactive)
IEEE 802.6 Metropolitan Area Networks (disbanded)
IEEE 802.7 Broadband LAN using Coaxial Cable
(disbanded)
IEEE 802.8 Fiber Optic TAG (disbanded)
IEEE 802.9 Integrated Services LAN (disbanded)
IEEE 802.10 Interoperable LAN Security (disbanded)
Bisma Sajid-CIIT wah campus

17. IEEE 802.11 Wireless LAN & Mesh (Wi-Fi
certification)
IEEE 802.12 demand priority (disbanded)
IEEE 802.13 Not Used
IEEE 802.14 Cable modems (disbanded)
IEEE 802.15 Wireless PAN
IEEE 802.15.1 (Bluetooth certification)
IEEE 802.15.4 (ZigBee certification)
IEEE 802.16 Broadband Wireless Access (WiMAX
certification)
IEEE 802.17 Resilient packet ring
IEEE 802.18 Radio Regulatory TAG
IEEE 802.19 Coexistence TAG
IEEE 802.20 Mobile Broadband Wireless Access
IEEE 802.21 Media Independent Handoff
IEEE 802.22 Wireless Regional Area Network
Bisma Sajid-CIIT wah campus

18. It is concerned with:
 802 LAN/MAN architecture
 internetworking among 802 LANs, MANs
and wide area networks
 Interface between upper and lower layers
 802 overall network management
Bisma Sajid-CIIT wah campus

19. It defines Logical Link Control (LLC) as the upper
portion of the Data Link Layer.
The IEEE 802.2 sub layer adds some control
information to the message created by the upper
layer and passed to the LLC for transmission to
another node on the same data link.
Bisma Sajid-CIIT wah campus

20.  Defines the MAC layer for bus networks that
use CSMA/CD. This is the basis of
the Ethernet standard.
Bisma Sajid-CIIT wah campus

21.  There are four cabling standards as per 802.3
1. 10Base5
2. 10Base2
3. 10Base-T
4. 10Base-F
Bisma Sajid-CIIT wah campus

22. Cable
Name
Cable
Type
Transmissi
on
Rate
Max. length
before
repeater
needed
Max. No.
of
Computer
10Base5 Thick
coaxial
10Mbsec 500 metres 100 per
segment
10Base2 Thin
coaxial
cable
10Mbsec 200 metres 30 per
segment
10BaseT Twisted
Pair
10/100
Mbsec
100 metres 1024 per
segment
10BaseF Fiber Optic
cable
100/1000
Mbsec
2000 metres 1024 per
segment
Bisma Sajid-CIIT wah campus

23.  IEEE 802.4- Defines the MAC layer for bus
networks that use a token-passing
mechanism (token bus networks)
 IEEE802.5- Defines the MAC layer for token-
ring networks.
Bisma Sajid-CIIT wah campus

24.  802.11 refers to a family of specifications
developed by the IEEE for wireless LAN
technology.
 802.11 specifies an over-the-air interface
between a wireless client and a base station
or between two wireless clients.
 Wireless LANs primarily use CSMA/CA -
Carrier Sense Multiple Access/Collision
Avoidance.
Bisma Sajid-CIIT wah campus

25. There are several specifications in the
802.11 family:
 802.11- Applies to wireless LANs and provides 1 or 2
Mbps transmission in the 2.4 GHz band using either
frequency hopping spread spectrum (FHSS) or direct
sequence spread spectrum (DSSS).
 802.11a - An extension to 802.11 that applies to
wireless LANs and provides up to 54 Mbps in the 5GHz
band. 802.11a uses an orthogonal frequency division
multiplexing encoding scheme.
Bisma Sajid-CIIT wah campus

26.  802.11b - is an extension to 802.11 that applies to
wireless LANs and provides 11 Mbps transmission in the 2.4
GHz band. 802.11b uses only DSSS.
 802.11g - Applies to wireless LANs and provides 20+
Mbps in the 2.4 GHz band.
 802.11n- Applies to
wireless LANs and
provides up to 540Mbps in
the 2.4- 5 GHz band.
Bisma Sajid-CIIT wah campus

27. Bisma Sajid-CIIT wah campus

28. IEEE 802.15 is a name for wireless personal
area network standards.
 802.15.1 – Bluetooth
 802.15.3 – high data rate WPAN
 802.15.4 - ZigBee, Short range wireless
sensor networks
Bisma Sajid-CIIT wah campus

29. IEEE 802.1X is an IEEE Standard for port-
based Network Access Control (PNAC). It is
part of the IEEE 802.1 group of networking
protocols. It provides an authentication
mechanism to devices wishing to attach to
a LAN or WLAN.
Bisma Sajid-CIIT wah campus

30.  IEEE 802.16 – Wireless Metropolitan Area
Networks (WMAN)
 IEEE 802.17 - Resilient Packet Ring( for the optimized
transport of data traffic over optical fiber ring networks
 IEEE 802.18 - Radio regulatory TAG(technical advisory
group) for the future standards.
 IEEE 802.20 - Mobile Broadband Wireless
Access (MBWA)
Bisma Sajid-CIIT wah campus

31.  802.21 - Handoff/Interoperability between
networks
 802.22 - Wireless Regional Area Networks
Bisma Sajid-CIIT wah campus

32.  IEEE 1725 - for rechargeable batteries for
cellular telephones. It addresses the quality
and reliability of rechargeable lithium ion
and lithium ion polymer batteries for cellular
telephone applications.
 IEEE 1394 - commonly called Firewire®,
targets the serial buses that connect
computer systems and peripherals.
 IEEE 1073 - Point of Care Medical Device
Communication Standards.
Bisma Sajid-CIIT wah campus

33. Bisma Sajid-CIIT wah campus