The document discusses standards and their importance, providing examples of IEEE standards. It outlines how individuals and companies can get involved with standards development through membership or participation. The document also describes education resources available through IEEE, such as grants for student design projects, speakers, and an e-magazine.
This presentation provides an overview of OpenStand (www.open-stand.org), a multifaceted initiative that began with the drafting and joint affirmation of the OpenStand principles in August of 2012. Find out how OpenStand principles do more than align standards organizations – they lay out a new paradigm for technology development that is open, inclusive and market-driven from the bottom up. Find out how open standards benefit people, industry, markets, nations and the world.
The Time Sensitive Networking for Flexible Manufacturing Testbed is an award-winning Industrial Internet Consortium testbed hosted by National Instruments and Bosch. The testbed is focused on manufacturing, but can be usful in a wide range of applications, including utilities, transportation and oil and gas.
OSGi Service Platform in Healthcare Service Delivery and Management - Stan Mo...mfrancis
This document discusses enabling healthcare service delivery and management through remote medical monitoring. It presents a vision for an end-to-end sensor-based architecture using networked household devices, medical sensors, and a central monitoring service connected to doctors, specialists, nurses and hospitals. The architecture would include an open, standard healthcare services platform to manage remote services and interfaces between in-home devices, healthcare providers, and medical information systems. Key issues addressed are quality of service, common device and sensor interfaces, information processing capabilities, and security. Potential solutions discussed include related research efforts but note that no open standard platform currently exists.
The Standard for Low Voltage Lighting Systems, UL 2108, was revised in 2015 to explicitly accommodate PoE Lighting Systems. These systems include a network switch serving as the LED driver, communications cable (Cat5 / Cat6, et al), and low voltage luminaires equipped with an RJ45 input port and the ability to communicate with the network switch. They offer far-reaching versatility for facility lighting control. Compliance with the NEC, however, requires detailed knowledge about several different but inter-related articles to establish a clear fit between the equipment and the requirements. Special applications, such as emergency lighting, pose additional challenges. This presentation will explore the standard and code issues that equipment producers, specifiers, installers, and authorities having jurisdiction should consider when developing, recommending, deploying, or approving such equipment.
Presented by : Michael Shulman, UL
The document is an accredited certificate for the SAR evaluation of the MRET Polymer material. It summarizes that testing showed the MRET Polymer significantly reduced the amount of RF energy absorbed by the human body when applied to a mobile phone. The testing was conducted according to IEEE standards using various Nokia and Samsung phone models across GSM frequency ranges and signal modulations. The certificate authorizes the findings to indicate the MRET Polymer can be designated as a technology that reduces electromagnetic radiation absorption.
The document discusses standards and their importance, providing examples of IEEE standards. It outlines how individuals and companies can get involved with standards development through membership or participation. The document also describes education resources available through IEEE, such as grants for student design projects, speakers, and an e-magazine.
This presentation provides an overview of OpenStand (www.open-stand.org), a multifaceted initiative that began with the drafting and joint affirmation of the OpenStand principles in August of 2012. Find out how OpenStand principles do more than align standards organizations – they lay out a new paradigm for technology development that is open, inclusive and market-driven from the bottom up. Find out how open standards benefit people, industry, markets, nations and the world.
The Time Sensitive Networking for Flexible Manufacturing Testbed is an award-winning Industrial Internet Consortium testbed hosted by National Instruments and Bosch. The testbed is focused on manufacturing, but can be usful in a wide range of applications, including utilities, transportation and oil and gas.
OSGi Service Platform in Healthcare Service Delivery and Management - Stan Mo...mfrancis
This document discusses enabling healthcare service delivery and management through remote medical monitoring. It presents a vision for an end-to-end sensor-based architecture using networked household devices, medical sensors, and a central monitoring service connected to doctors, specialists, nurses and hospitals. The architecture would include an open, standard healthcare services platform to manage remote services and interfaces between in-home devices, healthcare providers, and medical information systems. Key issues addressed are quality of service, common device and sensor interfaces, information processing capabilities, and security. Potential solutions discussed include related research efforts but note that no open standard platform currently exists.
The Standard for Low Voltage Lighting Systems, UL 2108, was revised in 2015 to explicitly accommodate PoE Lighting Systems. These systems include a network switch serving as the LED driver, communications cable (Cat5 / Cat6, et al), and low voltage luminaires equipped with an RJ45 input port and the ability to communicate with the network switch. They offer far-reaching versatility for facility lighting control. Compliance with the NEC, however, requires detailed knowledge about several different but inter-related articles to establish a clear fit between the equipment and the requirements. Special applications, such as emergency lighting, pose additional challenges. This presentation will explore the standard and code issues that equipment producers, specifiers, installers, and authorities having jurisdiction should consider when developing, recommending, deploying, or approving such equipment.
Presented by : Michael Shulman, UL
The document is an accredited certificate for the SAR evaluation of the MRET Polymer material. It summarizes that testing showed the MRET Polymer significantly reduced the amount of RF energy absorbed by the human body when applied to a mobile phone. The testing was conducted according to IEEE standards using various Nokia and Samsung phone models across GSM frequency ranges and signal modulations. The certificate authorizes the findings to indicate the MRET Polymer can be designated as a technology that reduces electromagnetic radiation absorption.
Track 2 session 4 - st dev con 2016 - opensoftwarexST_World
This document summarizes an agenda for an event on Open Software eXpansion. The agenda includes presentations on STM32's open development environment, open software expansion libraries for audio, sensors and RF, frameworks like BlueMicrosystem for Bluetooth and sensor applications, and the ecosystem of partners developing solutions with STM32 microcontrollers. The open software expansion aims to provide open licensing for value-added binary libraries to lower barriers for developers working with ST products. Diolan was highlighted as a partner providing a ready-made hardware solution called SensiBLE that is fully compatible with STM32 software and can be used for quick prototyping and small volume production.
IEC 62368-1 is a new international safety standard for audio/video, IT, and communications equipment that was approved in 2010. It consolidates two previous standards to accommodate converging technologies and integrated products. The standard was developed over eight years by IEC TC108 to provide a single standard covering a broad range of products. It uses hazard-based criteria and either prescriptive or performance-based requirements to address safety concerns while allowing for future innovations. A five-year transition period allows manufacturers time to implement the new standard.
Rachel Engineering Services is an electrical consultancy firm offering various services including technical testing, maintenance, installation, consulting, and information technology. They have a strong reputation for on-time and on-budget project completion. Services include electrical installation, cabling, lighting, power systems, and more for commercial, industrial and residential clients. The firm prides itself on using skilled staff with appropriate qualifications and training.
Kalyani Technologies provides IT and security solutions and services. It has experience implementing projects for large companies across various industries. It offers managed IT services, network solutions, safety and security systems, and shared IT services. Kalyani Technologies has partnerships with world-class brands and aims to deliver high-quality, customized solutions through a consultative approach.
T-Mobile IoT: The Network Built for Software.
Best in Class Radio
Distributed & Virtualized Core
Advanced Connectivity
Operation System
Connectivity Management (Local and Global)
Device and Data Management
Application Services Layer
IoT Solutions
Packaged Solutions - Off-the-Shelf
Custom Solutions
Industry Focused - Built for Purpose
IoT Innovation
Emerging Tech - Edge, Private Node
Developer Platform
Innovation Hubs - Curiosity Lab, 5G Innovation Lab, Automotive Lab
The document discusses Industry 4.0 automated test and diagnostic platforms. It introduces the EXiL platform as a contemporary redesign of traditional XiL systems that can seamlessly simulate, test, and validate systems from the beginning of development through maintenance. The EXiL platform uses a unique simulation engine and can integrate with IoT, AI, and cloud services to enable functions like system integration, validation of complex systems, and predictive maintenance. It provides advantages over traditional methods like flexibility, ease of use, integration with existing tools, remote maintenance, and cost savings.
The paper focuses on IoT as the latest trending technology in market and the challenges which a tester faces at both manual and automation front. The paper also sheds light on the scope of IoT in agile. The automation techniques which can be used are also elaborated in the same.
Epri iccp protocol - threats to data security and potential solutionsIvan Carmona
This document summarizes a technical report on threats to data security when using the Inter-Control Center Communications Protocol (ICCP) and potential solutions. ICCP is used to exchange operational data between utilities and control centers but provides only basic access control security. The report identifies security threats in ICCP usage, reviews its limited built-in security features, and discusses preliminary security solutions proposed for implementation in the OSI model layers. It also describes a proposed new system, STASE-MMS, that could secure ICCP data communications. EPRI plans to publish a follow-up report with specific ICCP security recommendations.
This chapter provides guidance on general rules for electrical installation design including methodology, regulations, standards, safety, testing, equipment conformity, and environmental considerations. It also covers characteristics of common loads like motors and heaters, and guidance on estimating installed power and sizing transformers based on load diversity factors. Following the methodology and considering all relevant factors will help ensure a safe and compliant electrical installation.
Track 3 session 1 - st dev con 2016 -ieee- iot standards adn open sourceST_World
The document discusses various topics related to IoT standards and open source initiatives. It provides an overview of IEEE's activities in developing standards for emerging technologies like IoT, augmented reality, smart cities, 5G networks and more. It also discusses how IEEE is expanding its collaborative platform by embracing open source processes and bringing together open source and standards development communities.
IEEE Digital Senses Initiative - Standards Activities 3/30/2017yymedia
IEEE Digital Senses Initiative is an IEEE “future directions” initiative dedicated to hacking human senses for VR, AR and human augmentation.
IEEE P2048 Working Group is developing eight standards for virtual reality (VR) and augmented reality (AR). Having attracted participants from 194 companies and institutions all over the world, the working group now is one of the largest forces dedicated to VR/AR standardization. The working group participants already include device manufacturers, content providers, service providers, technology developers, government agencies and other parties relevant to VR/AR, constituting an excellent mixture for the standards to be widely adopted.
This session was part of the IEEE Bangalore Section webinar organized to orient interested parties to the standards development world. The link to this slide deck is refereed from the other slide deck posted adjacent to this.
Yu Yuan (IEEE Standards Association): The Road to the Ultimate VR/AR - Transf...AugmentedWorldExpo
A talk from the Work Track at AWE USA 2017 - the largest conference for AR+VR in Santa Clara, California May 31- June 2, 2017.
Yu Yuan (IEEE Standards Association): The Road to the Ultimate VR/AR - Transforming All The Industries in This "Real" World
Virtual Reality (VR) and Augmented Reality (AR) have been evolving significantly in every aspect since their births. What would be the ultimate experiences that VR and AR have to offer? When could we get there, in 5 years or 50 years? What enabling technologies are still missing or yet to be developed? In this session, VR/AR industry pioneers will share their insights and predictions.
http://AugmentedWorldExpo.com
Lloyd Green (IEEE): Standardization Needs and Efforts in VR/ARAugmentedWorldExpo
A talk from the Develop Track at AWE USA 2017 - the largest conference for AR+VR in Santa Clara, California May 31- June 2, 2017.
Lloyd Green (IEEE): Standardization Needs and Efforts in VR/AR
Standardization is a key to growing markets and healthy ecosystems in many industries (if not all of them). What needs to be standardized or is being standardized in today's Virtual Reality (VR) and Augmented Reality (AR) industry? What outcome can be expected from these standards activities? How can they change the industry? In this session, VR/AR standards developers will give you the latest update.
http://AugmentedWorldExpo.com
Open Source and Standards Communities Coming Together to Solve Real World Pro...All Things Open
The document discusses how IEEE and open source communities are working together to solve real-world problems. It provides an overview of IEEE's global reach and technical breadth in standards development. It then describes IEEE-SA Open, a platform for open source software, hardware, and data projects, and how it can bridge standards development and open source communities. Examples are given of how open source projects are being used in conjunction with IEEE standards development.
This document discusses the implementation of IEEE 802.15.4-based communications in wireless sensor nodes for biomedical signal monitoring. It describes using the MiWi protocol to implement a simplified version of IEEE 802.15.4 in a personal area network coordinator and body temperature sensor node. It also discusses testing the network performance with a packet sniffer and transmitting packet headers and data between nodes.
The document summarizes the seven-layer OSI model and its purpose in standardizing network communication. It describes each layer's function, from the physical layer dealing with hardware up to the application layer interacting with software programs. Standards organizations like IEEE, ISO, and IANA help ensure compatibility by defining protocols for each OSI layer.
Track 2 session 4 - st dev con 2016 - opensoftwarexST_World
This document summarizes an agenda for an event on Open Software eXpansion. The agenda includes presentations on STM32's open development environment, open software expansion libraries for audio, sensors and RF, frameworks like BlueMicrosystem for Bluetooth and sensor applications, and the ecosystem of partners developing solutions with STM32 microcontrollers. The open software expansion aims to provide open licensing for value-added binary libraries to lower barriers for developers working with ST products. Diolan was highlighted as a partner providing a ready-made hardware solution called SensiBLE that is fully compatible with STM32 software and can be used for quick prototyping and small volume production.
IEC 62368-1 is a new international safety standard for audio/video, IT, and communications equipment that was approved in 2010. It consolidates two previous standards to accommodate converging technologies and integrated products. The standard was developed over eight years by IEC TC108 to provide a single standard covering a broad range of products. It uses hazard-based criteria and either prescriptive or performance-based requirements to address safety concerns while allowing for future innovations. A five-year transition period allows manufacturers time to implement the new standard.
Rachel Engineering Services is an electrical consultancy firm offering various services including technical testing, maintenance, installation, consulting, and information technology. They have a strong reputation for on-time and on-budget project completion. Services include electrical installation, cabling, lighting, power systems, and more for commercial, industrial and residential clients. The firm prides itself on using skilled staff with appropriate qualifications and training.
Kalyani Technologies provides IT and security solutions and services. It has experience implementing projects for large companies across various industries. It offers managed IT services, network solutions, safety and security systems, and shared IT services. Kalyani Technologies has partnerships with world-class brands and aims to deliver high-quality, customized solutions through a consultative approach.
T-Mobile IoT: The Network Built for Software.
Best in Class Radio
Distributed & Virtualized Core
Advanced Connectivity
Operation System
Connectivity Management (Local and Global)
Device and Data Management
Application Services Layer
IoT Solutions
Packaged Solutions - Off-the-Shelf
Custom Solutions
Industry Focused - Built for Purpose
IoT Innovation
Emerging Tech - Edge, Private Node
Developer Platform
Innovation Hubs - Curiosity Lab, 5G Innovation Lab, Automotive Lab
The document discusses Industry 4.0 automated test and diagnostic platforms. It introduces the EXiL platform as a contemporary redesign of traditional XiL systems that can seamlessly simulate, test, and validate systems from the beginning of development through maintenance. The EXiL platform uses a unique simulation engine and can integrate with IoT, AI, and cloud services to enable functions like system integration, validation of complex systems, and predictive maintenance. It provides advantages over traditional methods like flexibility, ease of use, integration with existing tools, remote maintenance, and cost savings.
The paper focuses on IoT as the latest trending technology in market and the challenges which a tester faces at both manual and automation front. The paper also sheds light on the scope of IoT in agile. The automation techniques which can be used are also elaborated in the same.
Epri iccp protocol - threats to data security and potential solutionsIvan Carmona
This document summarizes a technical report on threats to data security when using the Inter-Control Center Communications Protocol (ICCP) and potential solutions. ICCP is used to exchange operational data between utilities and control centers but provides only basic access control security. The report identifies security threats in ICCP usage, reviews its limited built-in security features, and discusses preliminary security solutions proposed for implementation in the OSI model layers. It also describes a proposed new system, STASE-MMS, that could secure ICCP data communications. EPRI plans to publish a follow-up report with specific ICCP security recommendations.
This chapter provides guidance on general rules for electrical installation design including methodology, regulations, standards, safety, testing, equipment conformity, and environmental considerations. It also covers characteristics of common loads like motors and heaters, and guidance on estimating installed power and sizing transformers based on load diversity factors. Following the methodology and considering all relevant factors will help ensure a safe and compliant electrical installation.
Track 3 session 1 - st dev con 2016 -ieee- iot standards adn open sourceST_World
The document discusses various topics related to IoT standards and open source initiatives. It provides an overview of IEEE's activities in developing standards for emerging technologies like IoT, augmented reality, smart cities, 5G networks and more. It also discusses how IEEE is expanding its collaborative platform by embracing open source processes and bringing together open source and standards development communities.
IEEE Digital Senses Initiative - Standards Activities 3/30/2017yymedia
IEEE Digital Senses Initiative is an IEEE “future directions” initiative dedicated to hacking human senses for VR, AR and human augmentation.
IEEE P2048 Working Group is developing eight standards for virtual reality (VR) and augmented reality (AR). Having attracted participants from 194 companies and institutions all over the world, the working group now is one of the largest forces dedicated to VR/AR standardization. The working group participants already include device manufacturers, content providers, service providers, technology developers, government agencies and other parties relevant to VR/AR, constituting an excellent mixture for the standards to be widely adopted.
This session was part of the IEEE Bangalore Section webinar organized to orient interested parties to the standards development world. The link to this slide deck is refereed from the other slide deck posted adjacent to this.
Yu Yuan (IEEE Standards Association): The Road to the Ultimate VR/AR - Transf...AugmentedWorldExpo
A talk from the Work Track at AWE USA 2017 - the largest conference for AR+VR in Santa Clara, California May 31- June 2, 2017.
Yu Yuan (IEEE Standards Association): The Road to the Ultimate VR/AR - Transforming All The Industries in This "Real" World
Virtual Reality (VR) and Augmented Reality (AR) have been evolving significantly in every aspect since their births. What would be the ultimate experiences that VR and AR have to offer? When could we get there, in 5 years or 50 years? What enabling technologies are still missing or yet to be developed? In this session, VR/AR industry pioneers will share their insights and predictions.
http://AugmentedWorldExpo.com
Lloyd Green (IEEE): Standardization Needs and Efforts in VR/ARAugmentedWorldExpo
A talk from the Develop Track at AWE USA 2017 - the largest conference for AR+VR in Santa Clara, California May 31- June 2, 2017.
Lloyd Green (IEEE): Standardization Needs and Efforts in VR/AR
Standardization is a key to growing markets and healthy ecosystems in many industries (if not all of them). What needs to be standardized or is being standardized in today's Virtual Reality (VR) and Augmented Reality (AR) industry? What outcome can be expected from these standards activities? How can they change the industry? In this session, VR/AR standards developers will give you the latest update.
http://AugmentedWorldExpo.com
Open Source and Standards Communities Coming Together to Solve Real World Pro...All Things Open
The document discusses how IEEE and open source communities are working together to solve real-world problems. It provides an overview of IEEE's global reach and technical breadth in standards development. It then describes IEEE-SA Open, a platform for open source software, hardware, and data projects, and how it can bridge standards development and open source communities. Examples are given of how open source projects are being used in conjunction with IEEE standards development.
This document discusses the implementation of IEEE 802.15.4-based communications in wireless sensor nodes for biomedical signal monitoring. It describes using the MiWi protocol to implement a simplified version of IEEE 802.15.4 in a personal area network coordinator and body temperature sensor node. It also discusses testing the network performance with a packet sniffer and transmitting packet headers and data between nodes.
The document summarizes the seven-layer OSI model and its purpose in standardizing network communication. It describes each layer's function, from the physical layer dealing with hardware up to the application layer interacting with software programs. Standards organizations like IEEE, ISO, and IANA help ensure compatibility by defining protocols for each OSI layer.
OBJEVTE MOŽNOSTI PUBLIKOVÁNÍ S VYDAVATELSTVÍM IEEE - by ESZTER LUKACSUstredni knihovna VUT
About IEEE Xplore Digital Library, Why publish with IEEE, Publish in journal or conference, Find the right IEEE publication, Paper structure, Ethics, Open Access, Review process,
US DOT ITS NTCIP 1213 And The Internet Of ThingsJim Frazer
The document discusses the US DOT's goal of developing interoperable standards for intelligent transportation systems and the internet of things. It outlines the challenges of developing standards for a larger ecosystem of interconnected devices. It then discusses the US DOT's NTCIP 1213 standard for electrical lighting management systems and how it aims to support interoperability across different protocols and layers of the OSI model. It highlights initiatives to develop future versions of the standard to enable adaptive roadway lighting and integration with smart grid technologies.
Operating costs decrease and agility increases, allowing you to react quickly to new market opportunities.
http://www.cisco.com/web/offers/sp04/simplifying-operations/index.html?KeyCode=000947566
OERs for improving European SMEs competitiveness: from video-lectures to remo...Manuel Castro
Presentation at the EDUCON 2018 conference in Spain, April 2018, about the Open Educational Resources approach used in the European Projects IN-CLOUD, IoT4SMEs and IoE-EQ regarding the needs of the Small and Medium Enterprises to adapt heir skills and competences to new business trends and technology approaches. Authors present the approach from Uninettuno and UNED
The document discusses the IEEE 1451 family of standards for smart transducer communication. The standards define interfaces and protocols to connect transducers like sensors and actuators to networks. This allows for plug-and-play functionality and interoperability between transducers and networks. The key standards are 1451.1 for the object model, 1451.2 for the transducer interface, and 1451.3/1451.4 for distributed and mixed-mode systems. The standards benefit transducer manufacturers and users by lowering costs and simplifying integration of transducers with networks and systems.
The document summarizes an upcoming webinar on accessing IEEE Xplore. The webinar will introduce how to access IEEE's open access collections, create an IEEE Xplore account, search for open access articles, set up article alerts, and discuss other IEEE resources beyond open access. It will provide an overview of IEEE as the world's largest technical membership organization and discuss its publications, conferences, standards, and educational resources.
API and App Ecosystems - Build The Best: a deep diveCisco DevNet
A session in the DevNet Zone at Cisco Live, Berlin. This presentation presents our perspective and guidance on full life-cycle management and governance of API's from defining with the customer in mind, building, publishing on a single platform, supporting and retiring API's for the business outcomes you're driving!
At the American Telemedicine Association 2022 Conference, IEEE SA presented perspectives on where the development of global technical and data standards in remote patient monitoring (RPM) will support the future of innovation while moving the needle in patient-centered care.
This document outlines the agenda for an international conference on quantum computing, artificial intelligence, and related topics. The conference will feature several keynote speakers and panels discussing various applications and policy issues. Topics include the European Commission's work on AI, practical applications of quantum computing in medicine, the impact of AI and computing power on healthcare, and perspectives on quantum computing from various governments and companies. The document provides names, titles, and affiliations for multiple speakers as well as summaries of some of their planned presentations.
This document discusses digital telepathy and the increasing connectivity of everything through technology convergence. It introduces the speakers and covers several topics including: energy and environmental megatrends driving connectivity; how technology is facilitating connectivity across various domains like home automation, renewable energy, and healthcare; examples of how connectivity enables human and machine interaction; and the need for early standards to address issues like privacy and security as connectivity increases.
The document discusses a panel on open and interoperable augmented reality. The panelists included experts from IEEE-SA, The Heavy Projects, Perey Research & Consulting, and Georgia Institute of Technology. They sought to define an open approach to augmented reality that would work across any device or software, allow any data provider, and create accessible experiences for all. The community is working towards open standards to bring the virtual and physical worlds together in an interoperable way.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
This document discusses power saving methods in EPON (Ethernet Passive Optical Network) fiber access networks. It outlines the need for power savings due to the large power consumption of ONU (Optical Network Unit) devices and regional guidelines. It describes power saving mechanisms at the device level including components power gating and clock gating, and at the network level using ONU sleep modes controlled by the OLT (Optical Line Terminal). The document evaluates the power savings effectiveness of ONU sleep modes and shows savings increase with longer sleep durations if connectivity is maintained.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
China Telecom has been migrating from ADSL to fiber technologies like EPON and GPON to meet increasing broadband subscriber and bandwidth demands, piloting EPON in 2005 and making it a core access technology due to its maturity and interoperability. They aim to accelerate FTTH deployment through projects like "Broadband China, Optical City" to reach 100 million FTTH homes by 2015 using EPON and GPON, while also starting rollout of 10G-EPON to improve bandwidth for multi-dwelling units.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
More from IEEE Standards Association (IEEE SA) (19)
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptxSitimaJohn
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
3. IEEE STANDARDS ASSOCIATION
3
Nurture, develop and advance global technologies through the facilitation of standards development and collaboration activities
Provide a venue for innovators
Provide solutions through a menu of engagement options
Our work drives the functionality, capabilities and interoperability of a wide range of products and services that transform the
way people live, work, and communicate -- advancing technology for the benefit of humanity
Vision
Be a world-class Standards Development
Organization
Mission
Provide a high quality, market relevant standardization
environment, respected world-wide along with conformity
assessment solutions
4. IEEE Standards Association (IEEE SA)
4
20,000
STANDARDS
DEVELOPERS
WORLDWIDE
700+
STANDARDS
UNDER
DEVELOPMENT
1,250+
ACTIVE
STANDARDS
INDEPEN-
DENT
ORGANIZATION
IEEE standards
span a broad
spectrum of
technologies,
such as:
▪ Aerospace Electronics
▪ Broadband Over Power Lines
▪ Broadcast Technology
▪ Clean Technology
▪ Cognitive Radio
▪ Design Automation
▪ Electromagnetic Compatibility
▪ Green Technology
▪ Ethernet/WLAN
▪ Medical Device Communications
▪ Nanotechnology
▪ Organic Components
▪ Portable Battery Technology
▪ Power Electronics
▪ Power & Energy
▪ Radiation/Nuclear
▪ Sensors
▪ Transportation Technology
5. 5
VALUE OF IEEE CERTIFICATION
Convenience
Intrinsic connection with IEEE-SA
working groups and supporting staff
Enable certification programs based
on converging technologies that
covers multiple technologies IEEE-
SA works on
Full-Spectrum
Service
Turnkey Certification Management
program, including Conformance,
Interoperability, Inspection, Accreditation
ICAP strategically aligns with global expert
test labs to provide the best level of
testing and field evaluation support
Legal and operational umbrella for testing
& conformity assessment programs
Test Suite & Specification Development
Self-Validation Suite Development
Inspection and Verification
Credibility
Only ICAP certifications come
with the IEEE Certification mark
IEEE maintained Certified Product
Registry
6. PORTFOLIO OF SENSORS RELATED IEEE STANDARDS
6
IEC/IEEE 21451 Series - Standard for a Smart Transducer Interface for Sensors, Actuators,
Devices, and Systems - Common Functions, Communication Protocols, and Transducer
Electronic Data Sheet (TEDS) Formats
1451.1 – Common Network Services
1451.2 – Point to Point interface
1451.3 – Distributed multidrop systems
1451.99 - Standard for Harmonization of Internet of Things (IoT) Devices and Systems
IEEE 2700 - Sensor Performance Parameter Definitions
IEEE P2510 - Harmonization of Industrial Sensors
IEEE 2520 Series - Standard for testing machine olfaction devices and systems
IEEE P2846 – Formal Model for Safety Considerations in Automated Vehicle Decision
Making
IEEE P2020 - Standard for Automotive System Image Quality
8. WHAT IS THE IEEE SENSORS CONFORMITY ASSESSMENT PROGRAM?
8
An initiative that will lead to increased compliance to standards in a rapidly growing market
fueled by IoT.
Why IEEE Sensors Initiative?
No systematic adherence to standards
No authoritative source of information on sensor products
No established independent testing and certification
Key Strategy components:
Develop web based IEEE Sensors Registry
Establish IEEE Sensors Conformity Assessment Committee
Industry and Architecture sub-committees
12. 12
No fee for early access
Available 24/7
Take advantage
Register now!
sensorsregistry.ieee.org
13. IEEE SENSORS REGISTRY – SUMMARY
13
• The Sensors Registry is a critical part of IEEE Sensors Conformity Assessment
Initiative
• This will lead to increased compliance to standards in sensors products in
a rapidly growing market fueled by IoT
• Call for interest
• IEEE Sensors Conformity Assessment Committee will be established soon
Contact sensorsregistry@ieee.org if you would like to join.
• IEEE Sensors Registry- ready for industry use
• No cost for early access participants!
15. THANK YOU
15
Ravi Subramaniam
Director
IEEE Conformity Assessment Program
r.subramaniam@ieee.org
Standards.ieee.org/icap
Social Media
linkedin.com/in/rsubramaniam
Twitter: @mr_ravin